tie rods & tie bar systems - sta-lok terminals 2016.pdf · tie rods / tie bars for over four...
TRANSCRIPT
TIE RODS & TIE BAR SYSTEMS
For Architectural Projects Worldwide
Picture: Arundel Great Court, LondonArchitects: HLM Design
TIE RODS / TIE BARS
For over four decades Sta-Lok has established a globalreputation for the manufacture and supply of high qualitystainless steel solutions to Architects, Designers andEngineers.
Sta-Lok products are manufactured in our own UK factory tothe highest standards – quality is paramount, products areindividually inspected and have full material traceability.
Our specialist Tie Rod / Tie Bar range of products includes,Fork Ends, Spade Ends and our unique RTP Ends and CentreDiscs. For projects that require unique design elements, ourteam of expert technicians can design systems to suit themost demanding specifications.
Bridges, Office Blocks, Shopping Centres and Malls, Airports,Transport Stations and Residential Homes are just some ofthe applications where Sta-Lok products have helpedArchitects and Designers’ visions become reality.
We offer specialist technical advice to clients, so takeadvantage of our expertise and experience and contact us foradvice.
2
Our technical specialists are available to assist withdesign details and product selection, please contactus for further information.
+44 (0)1206 390 777 [email protected]
TIE RODS / TIE BARS
Bar Diameter
Yield Load Kn
Breaking Load Kn
M6
8.9
12.5
M8
16.4
23.0
M10
26.1
36.6
M12
38.1
53.4
M16
72.1
100.9
M20
103.6
144.0
M22
129.5
180.1
M24
149.2
207.5
M27
196.4
273.3
M30
238.7
332.1
M36
349.2
485.8
ROD FINISH OPTIONS
Polished 240 Grit NaturalMaterial specification to EN 10088
Sta-Lok tie rods are manufactured from highstrength Stainless steel grade 316 (1.4404)and Duplex 2205 (1.4462).Standard system lengths up to 3 metres canbe supplied with a variety of end fitting options.System lengths up to 6 metres can bemanufactured to special order; alternativelyrod connectors can be used to achieve longerspans.
AdjustmentSta-Lok rod systems are manufactured withthreads machined at each end. +/- Adjustmentis achieved by rotation of the rod in aclockwise or counter-clockwise direction.
Ready to InstallOur systems are supplied pre-assembledand adjusted to your specifications; thismeans that they can be fitted straight fromthe box.
Where required, rods can be individuallylabelled and supplied with a locationregister to speed up identification and siteinstallation.
End fitting optionsFork endsSpade endsRTP endsCentre discs
Mechanical PropertiesM6 - M16 Bars 0.2% Proof strength 500 N/mm2 Tensile strength 700 N/mm2
M20 - M36 Bars 0.2% Proof strength 460 N/mm2 Tensile strength 640 N/mm2
In compliance with BS EN 1090-1:2009BS EN 1090-2:2008 + A1:2011BS EN 1090-3 + A1:2011
5
Tie rods are offered with three different finish optionsNatural (may contain natural grain features)Satin (240 Grit finish)Polished
F34 FORK TO FORK SYSTEM
6 Picture: The Forum, NorwichArchitects: Michael Hopkins and Partners
F34 FORK TO FORK SYSTEM
7
Thread
Yield Load Kn
Breaking Load Kn
+/- Adjustment
A
B
C
D
P
M6
8.9
12.5
28
59
10
8.5
6.3
6.3
M8
16.4
23.0
36
78
14
10.3
8
8
M10
26.1
36.6
43
104
22
16
11
11
M12
38.1
53.4
43
115
27
19
12.7
12.7
M16
72.1
100.9
53
140
30
23
16
16
M20
103.6
144.0
58
166
40
26
19
19
M22
129.5
180.1
60
184
45
32
22
22
M24
149.2
207.5
66
207
50
35
25
25
M27
196.4
273.3
78
228
50
41
28
28
M30
238.7
332.1
98
264
60
44
31
30
M36
349.2
485.8
98
279
60
50
35
34
A fully machined tie rod fork, with sleekgeometry and a wide range of adjustment,developed to meet the requirements ofmodern Architectural design.
System length up to 6 metres are available,rod connectors can be used to achievelonger spans.
AdjustmentTie rods and fittings are threaded left handone end and right hand the other +/-adjustment is achieved by rotation of therod in a clockwise or counter-clockwisedirection.
LockingConical locking nuts have been designedto cover tie bar threads at mid adjustment,providing a clean line between the rod andend fitting.
PinsDouble headed pins including pin headand locking screw are supplied asstandard.
Isolating between different materials canbe achieved by using isolation washersand sleeves.
Ready to InstallTie rod systems are suppliedready to install. Fork Ends are pre-assembled and adjusted to customers’pin / pin requirements.
Fork Finish OptionsFork ends and conical nuts are availablewith Satin (240 grit finish) as standard,Highly polished finish is optional.
D
P
A
C B
F33 SPADE TO SPADE SYSTEM
8 Picture: Gangnam Tower, SeoulArchitects: Skidmore Owings Merrill LLP
F33 SPADE TO SPADE SYSTEM
9
Thread
Yield Load Kn
Breaking Load Kn
+/- Adjustment
A
B
C
D
H
M6
8.9
12.5
15
52
10
9
6
6
M8
16.4
23.0
15
57
14
11
8
8
M10
26.1
36.6
15
74
20
16
11
11
M12
38.1
53.4
15
97
25
20
12
12.7
M16
72.1
100.9
15
104
30
26
16
16
M20
103.6
144.0
15
136
40
30
19
19
M22
129.5
180.1
20
152
45
32
22
22
M24
149.2
207.5
20
174
50
40
25
25
M27
196.4
273.3
20
181
50
41
28
28
M30
238.7
332.1
25
210
55
51
30
30
M36
349.2
485.8
25
246
70
60
35
34
A fully machined tie rod spade, with sleekgeometry, developed to meet therequirements of modern Architecturaldesign.
System lengths up to 6 metres are available,rod connectors can be used to achievelonger spans.
AdjustmentTie rods and fittings are threaded left handone end and right hand the other +/-adjustment is achieved by rotation of the rodin a clockwise or counter-clockwisedirection.
LockingConical locking nuts provide a clean linebetween the rod and end fitting.
Ready to InstallTie rod systems are supplied ready toinstall. Spade ends are pre-assembled andadjusted to customers hole centrerequirements.
Fork Finish OptionsSpade ends and conical nuts are availablewith Satin (240 grit finish) as standard,Highly polished finish is optional.
D
A
C B
H
RTP SYSTEM
10 Picture: Clinton Presidential CenterArchitects: Polshek Partnership
RTP SYSTEM
11
Thread
Yield Load Kn
Breaking Load Kn
+/- Adjustment
A
B
M6
8.9
12.5
15
45
14
M8
16.4
23.0
15
51
17
M10
26.1
36.6
15
61
25
M12
38.1
53.4
15
63
32
M16
72.1
100.9
15
75
38
M20
103.6
144.0
15
89
44
M22
129.5
180.1
20
105
50
M24
149.2
207.5
20
119
57
M27
196.4
273.3
20
130
63
M30
238.7
332.1
25
140
69
M36
349.2
485.8
25
161
82
Designed for application in glass facades,providing tension and support between steelmembers.
Fully machined with sleek geometry,developed to meet the requirements ofmodern Architectural design.
System lengths up to 6 metres are available,rod connectors can be used to achievelonger spans.
AdjustmentThe rods and fittings are threaded left handone end and right hand the other +/-adjustment is achieved by rotation of the rodin a clockwise or counter clockwisedirection.
LockingConical locking nuts provide a clean linebetween the rod and end fitting.
Ready to InstallTie rod systems are supplied ready toinstall. RTP ends are pre-assembled andadjusted to customers’ end to endrequirements.
RTP Finish OptionsRTP ends and conical nuts are availablewith Satin (240 grit finish) as standard,Highly polished finish is optional.
B
A
HD CENTRE DISCS
12
Bar Diameter
A
B
C
D
M6
70
20
6.3
5.5
M8
80
20
8
7
M10
120
40
11
10
M12
140
40
12.7
11
M16
180
50
16
15
M20
200
55
19
18
M22
230
60
22
21
M24
260
70
25
24
M27
300
70
28
27
M30
350
90
30
29
M36
350
90
34
34
Designed to BS 5950 - 1:2000.
Material Specification to EN 10088.
Fully machined centre discs have beendesigned to fit F34 tie rod fork ends.
Discs are available with 3 and 4 holes.
AdjustmentTie rods and fittings are threaded left handone end and right hand the other +/-adjustment is achieved by rotation of therod in a clockwise or counter-clockwisedirection.
Hole Position3 hole discs are manufactured with 120degree angle between hole centres.4 hole discs are manufactured to clients’specification.
Disc Finish OptionsSatin Highly polished
C
A
B
D
Variable120o
HD CENTRE DISCS
15
STA-LOK TERMINALS LTD.
The Forge . Mistley Heath . Manningtree . Essex CO11 2QH . England
+44(0)1206 390 777 . [email protected] . www.stalok.com
To find out about our wide
range of stainless steel wire
rope fittings please refer to
our Wire Systems brochure