tillage & seeding product family - holt cat · tillage & seeding product family there is...
TRANSCRIPT
Tillage & Seeding ProducT Family
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
www.sunflowermfg.com • 1-800-748-8481
1000 SerieS diSc harrowS
The Sunflower 1435 flexible tandem disc harrow combines aggressive gang angles
and weight with superior design and control to achieve excellent field performance. The
Sunflower 1435 is the 1st choice of farmers across North America for residue management
and seedbed preparation. It is available in seven widths from 20’ 7” (6.3m) to 35’10” (109
m) with the choice of full-concavity 22” (558.8 mm) or 24” (609.6 mm) blades.
1435 diSc harrow
1444 diSc harrow
LIMITEDWARRANTY
YEAR
1544 diSc harrow1321 diSc harrow
1234 diSc harrow
1212 diSc harrow
Note: Specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.
1000 series disc HARROWsdisc BLAdE
sPAciNG in (mm)8.5” (216)
7.5” (191) F & 8.5” (216) R8.5” (216) F & R 8.5” (216) F & R 8.75” (222) F & R8.5” (216) F & R 8.75” (222) F & R
NO. Of WidtHs
4841742
WORKiNG WidtHsft-in (m)
10’-6” (3.2) to 14’-7” (4.5)18’-11” (5.7) to 32’ (9.8)
12’ (3.7) to 18’ (5.5)20’ (6.1)
20’-7” (6.3) to 35’-10” (10.9)30’-6” (9.3) to 40’ (12.2)
42’-7” (13) & 45’-4” (13.8)
Est. WEiGHt lb (kg)
3978 (1804) to 5234 (2374)10904 (4946) to 17098 (7756)6079 (2757) to 9845 (4466)9857 (4471) to 10535 (4779)12500 (5670) to 19980 (9063)17916 (8127) to 24137 (10948)27200 (12338) & 28975 (13143)
MOdEL NuMBER
1212123413211331143514441544
Est. AVERAGE WEiGHt lbs/ft (kg/meter)
1206 (1795)1684 (5525)1444 (4738)1691 (5548)1874 (6148)1951 (6401)2011 (6598)
DisC BlaDe scRAPER
As the C-Flex hanger moves up and down, the disc gang and scraper move together. This stops the scraper from bottoming out on the spools or coming into contact with the gang.
TaPereD REAR GANGs
The precisely engineered preset gang angle assures that all soil thrown outward by the front gangs will be returned by the rear gangs. Sunflower’s three-sided blade on each rear corner produces a non-continuous furrow to minimize water erosion.
GAuGE WHEELs
This feature stops the front gangs of the wing frame from gouging, buckling or cutting deeper than the other gangs, promoting a level, ridge-free and furrow-free field. The heavy-duty gauge wheels feature a 5-bolt hub and 8.00 (203mm) x 10 ply tire.
rePhasing Lift sYstEM
Eliminates all linkages, reducing unpopular wear points. Each lift cylinder is equipped with replace-able hardened wear bushings on both clevis and cylinder-mounted ends.
heaVy-DuTy GANGs
22" (559 mm) and 24" (610 mm) disc blades enhance residue coverage and increase ability to penetrate the soil. Large 1-3/4" (44 mm) gang shafts with a spring washer on the end of the gang, provide a solid foundation.
MainTenanCe-free HiNGEs
Greasing is not required on the heavy-duty wing hinges with the maintenance-free UHMW plastic sleeves.
C-fleX™ BEARiNG stANdARd
C-Flex™ bearing standards absorb disc gang shock, extending bearing, spool and disc blade life. The C-Flex™ bearing standards also allow for easy maintenance of the disc gang assembly.
1000 Series disc harrow features.
DURABLELift sYstEMs
Most Sunflower discs are equipped with a maintenance-free lift system. Maintenance-free lift systems pivot on UHMW plastic sleeves that are maintenance free.
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
1000 Series disc harrow finishing attachments.
COIL-TINE HARROW
Three rows of 3/8" (11 mm) coil tines on 2-1/2" (64 mm) centers spaced 15" (381 mm) between bars. Individually mounted, featur-ing backup protection and adjust-ment for tine pitch, height, tilt and down pressure.
THREE-ROW sPiKE
Independent flexing of each bar allows maximum conformance to irregular terrain. The combination weight of 11" (279 mm) spikes on 1-1/2" (38 mm) centers, completes the seedbed whether primary or finish discing.
REAR tOW HitcH
Two rear tow hitch options. The first, shown in this photo, features a slide hitch and ball joint for ease of hook-up in limited space situations. The second option, not shown, features a fixed hitch with ball joint.
www.sunflowermfg.com • 1-800-748-8481
LIMITEDWARRANTY
YEAR
WHAT IS uHMW?
See page 7
2000 SerieS chiSel PlowS
This is the heaviest and largest chisel plow we build. Matched to high horsepower tractors, tillage becomes a simple
task and the results are impressive! The Sunflower Model 2433 tills deeply and evenly across the entire cutting width.
The heavy 4 in. x 6 in. (102 mm x 152 mm) tubular steel tongue extends from front to rear beneath the framework and
is bolted to each bar, distributing stress across the entire frame. Rephasing hydraulics provide superior depth control.
2433 chiSel Plow
Note: Specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.
2000 series cHisEL PLOWstRANsPORt WidtH
ft-in (m)18’-7” (5.7)18’-7” (5.7)18’-7” (5.7)18’-7” (5.7)18’-7” (5.7)18’-7” (5.7)18’-7” (5.7)18’-7” (5.7)
NO. Of sHANKs
2527313335373941
WORKiNG WidtHft-in (m)25’ (7.6)27’ (8.2)31’ (9.4)33’ (10)
35’ (10.7)37’ (11.3)39’ (11.9)41’ (12.5)
tRANsPORt HEiGHt ft-in (m)9’-10” (3)
10’-6” (3.2)12’-8” (3.9)13’-4” (4.1)14’-4” (4.4)15’-7” (4.7)16’-3” (5)
17’-3” (5.3)
MOdEL NuMBER2433-252433-272433-312433-332433-352433-372433-392433-41
Est. WEiGHt lbs (kg)
9135 (4144)9369 (4250)9917 (4498)10151 (4604)10465 (3190)11039 (5007)11273 (5113)11587 (5256)
aDjusTaBle HitcH
Ratchet-jack adjustable hitch allows precise level-ing of the chisel frame from front to rear. No bolts to remove or linkages to unhook, simplya ratchet the handle of the jack to decrease the draft load and smooth out the soil finish.
2000 Series chisel Plow features.
walking tANdEMs
Walking tandems are avail-able on all sections, allowing the machine to follow the ground contour, maintain-ing a more consistent shank depth. The tandem beam pivots on a set of greasable tapered roller bearings for smooth, long-lasting service. Grease-fitting-equipped six-bolt hubs and heavy-duty 2” (51 mm) slip-in spindles feature triple-lip seals.
single-PoinTdEPtH cONtROL
Front-mounted depth control allows the opera-tor to set the depth of the entire chisel from a single, convenient loca-tion. No need to move from frame to frame set-ting each section as you go, just turn the handle and dial in your depth.
hyDrauliCLift sYstEM
Rephasing hydraulic lift system features two 4” x 8” (102 mm x 203 mm) cylinders with hydraulic stroke control and match-ing 3-3/4” x 8” (95 mm x 203 mm) slave cylinders. Shank depth control is precise and the traditional rockshaft linkage wear-points are minimized.
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
2000 Series chisel Plow finishing attachments.
Three-row cOiL tiNE
Featuring 3/8” x 16” (11 mm x 106 mm) tines on 7 1/2” (191 mm) centers per bar, 2 1/2” (64 mm) spacing overall and 15” (381 mm) spacing between rows. The unique tine angle adjustment features a direct stop mechanism that eliminates wear-prone linkages and pins. Individually replaceable tines are designed to allow forward pivot for backup protection. Equipped with fully adjustable tension springs that allow desired down pressure settings to be set.
Three- anD fiVe-row sPiKE dRAG
The three-row and five-row spike drags are equipped with 3/4”x11” (19 mm x 28 mm) spikes spaced 9” (229 mm) apart per bar. Three-row configurations are spaced 3” (76 mm) overall and five-row configurations are spaced 1 3/4” (44 mm) overall. The spikes are mounted to individual bars that are linked together with unique connector, allowing you to control the flexibility of the harrow. The spike tooth drag provides additional incorporation and effectively completes the seedbed pro-cess by breaking clods, leveling and firming the soil.
rolling tREAdERs
Sunflower offers both conservation and standard treader wheels to match your farming operation. Hard surfaced teeth are available on the conservation treader wheel. Sunflower rolling treaders may be adapted to the full line of 2000 Series chisel plows. This attachment levels and firms the soil, provideing additional weed kill while mixing and distributing available residue.
2000 Serieschisel Plowshank options.rigiD sHANKs
Husky 1-1/4” x 2” (32 mm x 51 mm) with 30” (762 mm) clearance. Shank-to-frame stress is controlled by a rugged ductile shank mount. Reversible 5/8” x 2” (16 mm x 51 mm) points are standard equipment.
rigiD sHEARBOLt
Added protection against shank breakage without the additional
cost of springs. A beefy 1 1/2”x2” (38 mm x 51 mm) and 30” (762 mm) of underframe clearance. Shank mounts provide shear-bolt protection and retain the shank in the event of a shear-bolt breakage.
sPring- Cusion sHANKs
Husky 1-1/4” x 2” (32 mm x 51 mm) with 30” (762 mm) clearance. Shank-to-frame stress is controlled by a rugged ductile shank mount. Reversible 5/8” x 2” (16mm x 51mm) points are standard equipment.
www.sunflowermfg.com • 1-800-748-8481
3000 SerieS Fallow Tillage ToolS
The Sunflower model 3372 blade plow is designed with the operator in mind. This machine delivers
durable, reduced-maintenance equipment by incorporating UHMW polymer technology in all high wear
areas including lifts, coulter pivot bushings, hinge pivot bushings and flanges between the hinge ear.
Metal to metal wear points have been eliminated. We’ve also added extra strength and longer life to
our frame connections. The model 3372 incorporates easily adjustable swivel linkages between the
rockshafts at each frame for easy and fast adjustments and leveling.
3372 blade PlowLIMITED
WARRANTY
YEAR
Note: Specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.
3000 series fALLOW tOOLs
BLAdE siZE in (mm)
26”/32” (660/813)26”/32” (660/813)26”/32” (660/813)26”/32” (660/813)26”/32” (660/813)
NO. Of WidtHs
22111
NO. OfsHANKs13 & 1517 & 19
212529
WORKiNGWidtH ft-in (m)
21’ (6.4) & 25’ (7.6)28’ (8.5) & 32’ (9.8)
35’ (10.7)42’ (12.8)49’ (14.9)
MOdEL NuMBER
30303040
3050-353060-423070-49
tRANsPORtHEiGHtft-in (m)
10’-8” (3.3) & 12’-4” (3.8)10’-8” (6.7) & 12’-4” (3.8)
12’-8” (3.9)13’ (4)
15’-6” (4.7)
3000 sERiEs fALLOW KiNG tRANsPORtWidtHft-in (m)
14’-5” (4.4)21’-2” (6.5)21’-3” (6.5)22’-8” (6.9)24’ (7.3)
Est. WEiGHt lbs (kg)
5944 (2696) & 6160 (2794)8044 (3649) & 8274 (3753)
9759 (4427)11874 (3619)13650 (6192)
3300 sERiEs BLAdE PLOWs 6’ (1.8 m) BLAdEs
BLAdE siZE in (mm)
72” (1829)
NO. Of WidtHs
2
NO. OfBLAdEs
7 & 9
WORKiNGWidtH ft (m)
40’ (12.2)& 52’ (15.8)
MOdEL NuMBER
3300
tRANsPORtHEiGHtft (m)
13’-9” (4.2)
tRANsPORtWidtHft (m)
26’-5” (8.1)
Est. WEiGHt lbs (kg)
12718 (5769)& 15280 (6931)
3600 sERiEs BLAdE PLOWs
BLAdE siZE in (mm)
5” (1.5), 5”-3” (1.6) & 5”-6” (1.7)
NO. Of WidtHs
4
NO. OfBLAdEs
6, 7, 9 & 11
WORKiNGWidtH ft-in (m)
30’-6” (9.3) to55’-6” (16.9)
MOdEL NuMBER 3662-30
tRANsPORtHEiGHtft-in (m)
12’-10” (3.9) to14’-8” (4.5)
tRANsPORtWidtHft-in (m)
16’-10” (5.1) to 25’-5” (7.7)
Est. WEiGHt lbs (kg)
9294 (4216) to21058 (9552)
www.sunflowermfg.com • 1-800-748-8481
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
one-PieCewelDeD HitcH
The one-piece welded hitch is attached to the middle of the right and left center frames (4 & 6 section machines) by 4 1-1/4” (32 mm) bolts and flex links for full flexibility without sacrificing strength. Hitch attaching points are wear protected by thrust plates to ensure long life.
3000 Series Fallow Tool features.
walking tANdEMs
Walking tandems are stan-dard on all sections, allow-ing the machine to follow the ground contour, maintaining a more consistent shank depth. The tandem beam pivots on a set of regreas-able tapered roller bearings for smooth, long-lasting ser-vice. Grease fitting equipped six-bolt hubs and heavy-duty 2” (51mm) slip-in spindles feature triple-lip seals.
uhMwHiNGE BusHiNG
UHMW hinge bushings with flanges do not require daily greasing, protect against tear out of hinges and minimizes risk of hinge freeze-up. The UHMW flange also prevents metal-to-metal wear between frame connections, cushions high-stress hinge areas and quiets fold operation.
BoX-BraCeDstANdARds
The 1-1/4” (32 mm) thick box-braced standards add strength and sta-bility to the entire stan-dard assembly. Slim-line design is achieved while still increasing the thickness of the upright standards by 10%. The strong, sculptured upper box-brace narrows to a streamlined shape to insure mulch disturbance is kept to a minimum.
3000 Series Fallow Tool finishing attachments.
ConserVaTionanD sTanDarDtREAdER WHEELs
Sunflower offers both con-servation and standard treader wheels to match your farming operation. Hard surfaced teeth are available on the conserva-tion treader wheel.
Trash BARs
Minimizes residue build-up in treader wheels.
rolling tREAdERs
Built with high-carbon steel teeth, spe-cially stress-relieved for ductility and long field life. This means that you will get long life without costly hard facing. In fact, Sunflower does not recommend hard facing the treader teeth because temper could be changed. The same motion rips out weeds and leaves them roots-up on a soil and moisture-conserving field surface. This rigorous activity settles finer soil particles to minimize wind and water erosion.
sunflower pioneered the use of uHMW in tillage equipment in 1994. the use of uHMW technology was initiated from need.
what is uHMW Polymer?
“UHMW-PE or simply UHMW stands for Ultra High Molecular Weight Polyethylene. This raw material is well known by the engineering field as one of the toughest substances known to man. UHMW has an abrasion resistance ten times that of carbon steel and an amazing impact strength, in fact UHMW is used as a key ingredient in bullet proof vests and body armor.”
• The need for more productive field time and less greasing maintenance time• The need for fewer replacement parts resulting in less downtime and machine expense• The need for consistent field performance through the reduction of machine wear• The need for higher valued farm equipment by an ever-refining industry
LIMITEDWARRANTY
YEAR
4000 SerieS Primary Tillage ToolS
4530 diSc chiSel diSc
LIMITEDWARRANTY
YEAR
Note: Specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.
4000 series PRiMARY tiLLAGE
WORKiNG WidtHs ft-in (m)
8’-9” (2.5) to 18’-9” (5.7)21’-3” (6.5) to 28’-9” (8.8)12’-6” (3.8) & 17’-6” (5.3)
11’-3” (3.4) to 18’-9” (5.7)
23’-9” (7.2)
tOOL dEscRiPtiON
COULTER CHISELCOULTER CHISELDISC RIPPER DISC
DISC CHISEL DISC
DISC CHISEL DISC
NO. OfWidtHs
542
5
1
BLAdE diAMEtER& sPAciNG
in (mm)20” (508) @ 7.5” (191)20” (508) @ 7.5” (191)22” (559) @ 12” (305)
F & 10.5” (267) R22” (559) @ 12” (305)
F & 10.5” (267) R22” (559) @ 12” (305)
F & 10.5” (267) R
MOdEL NuMBER
421342334412
4511
4530
sHANK tYPE& sPAciNG
in (mm)H.D. CHISEL 15” (381)H.D. CHISEL 15” (381)
PARABOLIC 30” (762)
H.D. CHISEL 15” (381)
H.D. CHISEL 15” (381)
Higher plant populations and genetically modified hybrids have contributed to a growing residue problem that you are
faced with. The key to breaking down residue is properly sizing and mixing it in the top layer of soil. The Model 4530
disc chisel disc from Sunflower is aggressive enough to handle even the toughest residue conditions. Hydraulically
adjustable front and rear disc gangs can be changed independently of each other, enabling you to fine-tune your
machine from field to field. Chisel shanks are spaced on 15” (381mm) centers and will reach a depth up to 12-14”
(305 mm - 357 mm), and are strategically placed for optimum residue flow. The individually mounted front disc blades
will size and mix the residue, while the shanks will fracture the compaction up to 12-14” (305 mm - 357 mm) deep
and the rear gangs will provide the finish you desire.
Est. WEiGHt lb (kg)
6760 (3066) to 10692 (4850)14487 (6571) to 17047 (7733)13615 (6176) & 16200 (7348)
13160 (5969) to 17900 (8119)
24360 (11050)
www.sunflowermfg.com • 1-800-748-8481
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
uhMw tEcHNOLOGY
UHMW technology around the rock shafts means no greasing needed, depend-able performance and less parts wear.
4000 Series Primary Tillage tool features.
walking tANdEMs
Standard walking tandems minimize frame bounce and uneven penetration.
C-fleX™ BEARiNG stANdARds
Protect against field obstructions. Spring end collars ensure the gang stays properly torqued.
heaVy-DuTytRAsH BARs
Heavy-duty 3” (76 mm) wide channel iron trash bars are mounted between each coulter blade.
shank Options
RiGid sHEARBOLt
A maximum point load of 1,500 lbs. (680 kg) with a range of points to control residue.
heaVy-DuTy GANGs
Each coulter separating spool weighs 50 lbs. (23 kg), providing enough weight to slice through heavy residue and surface compaction.
all-welDeD fRAME
An all-welded 4” x 6” x 3/8” (102 mm x 152 mm x 11 mm) frame with special formed gussets in all high stress areas and fitted with an overhead truss hitch.
aDjusTaBle HitcH: (4213 anD 4233)
Either a single or double clevis adjustable hitch is available to allow front-to-rear leveling of the machine.
offseTsHANK MOduLEs
Optional offset shank modules can be added to the rear bar of the machine, providing even more clearance in heavy crop residue conditions.
AutO-REsEt PARABOLic
A maximum point load of 3,500 lbs. (1588 kg) with operating depths of up to 16”-18” (406 mm - 457 mm). Parabolic shanks provide a wider shattering pattern and require less draft than a straight shank.
AutO REsEt
A maximum point load of 1,500 lbs. (680 kg) with a vertical trip height of 13” (330 mm).
4000 Series finishing attachments.
The five-row spike drag features 11" x 3/4" (28 mm x 19 mm) spikes mounted on 1-3/4" (44 mm) centers. The link that connects the bars allows the unit to conform to irregular terrain and step over accumulated residues.Available for: 4213/4233
Rolling treader attachments level and firm the soil behind the coulter chisel. It’s even capable of seedbed preparation. Exclusive tooth design and greaseable triple-lip sealed bearings. Available for: 2433, 4213/4233
Sunflower’s most aggressive attach-ment is our chopper reel which can size residue, break up clods and level out-of-condition soil.Available for: 4110, 4213/4233
WHAT IS uHMW?
See page 7
The Sunflower Model 5035 field cultivator features heavy construction, outstanding clearance and superb flotation. The 3” x 4” (76 mm x 102 mm) rectangular tube frame provides the strength today’s high horsepower tractors require, and a Sunflower computer-aided design creates optimum shank placement for unmatched clearance. The Model 5035 features single-point depth control with rephasing lift cylinders... all covered under our three-year warranty. Shanks are available in either spring tension or S-tine design and offer up to 190 pounds (86 kg) of point load for extra tough conditions. Walking tandems and 9.5L (241 mm) tires provide the necessary flotation farmers require of a field cultivator, and the self-leveling hitch maintains a level frame from the front to rear regardless of operating depth.
5000 SerieS Field culTiVaTorS
5035 Field culTiVaTor
LIMITEDWARRANTY
YEAR
Note: Specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.
5000 series fiELd cuLtiVAtORsWORKiNGWidtHsft-in (m)
18’-6” (5.6) to 36’-6” (12.7)36’-6” (11.1) to 42’-6” (13)44’-6” (13.6) to 62’-6” (19)
NO. OfWidtHs
1046
sHANKsPAciNGin (mm) 6” (152)6” (152)6” (152)
MOdEL NuMBER
50355135 sW
5055
tRANsPORtWidtHft-in (m)
13’ (4) to 17’ (5.2) 15’-9” (4.8) to 17’-9” (5.4)17’-6” (5.3) to 19’-6” (5.9)
tRANsPORtHEiGHtft-in (m)
8-5 (2.6) to 15-1 (15)13-6 (4.1)
11-10 (3.6) to 16 (4.9)
Est. WEiGHt lbs (kg)
6000 (2736) to 10450 (4740)10800 (4998) to 11950 (5420)14000 (6350) to 19500 (8845)
single-PoinTdEPtH cONtROL
Conveniently located for easy adjustments and offers accuracy up to 1/4” (6 mm).Note - This is the 18’-28’ (5.5 m - 8.5 m) model shown. The 30’-62’ (9 m - 19 m) models feature single point depth control located on the wing lift adjustment arm.
5000 Series Field cultivator features.
heaVy-DuTyGAuGE WHEELs
Heavy-duty gauge wheels are positioned to minimize gouging at the outer ends of the machine and deliver consistent depth. Optional swivel-type gauge wheels available.
low-Profile sHANKs
An advanced simple design that features 190 lb. (86 kg) point load and 24” (61 mm) of underframe clearance. Computer de-signed shank placement provides outstanding trash flow in high residue applications.
uhMw WiNG HiNGEs
Featuring ultra high molecular weight mate-rial sleeves that require no greasing, hold hinge joints tight and offer extended life.
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
lifT aDjusTMenT ARM
Provides an accurate adjust-ment to individual sections. This is key in high residue fields.
uhMw ROcK sHAfts
Featuring exclusive poly-mer sleeves in tradition-al high wear areas. The UHMW material removes any greasing require-ments, excessive wear and keeps frame structure tight. UHMW is used on several Sunflower tillage tools for better performance and reduced maintenance.
DroPPeD cENtERfRAME HiNGE
The split wing 3-section models and all 5-section models feature a dropped hinge on the center frame and inner wing for reduced transport height and width.
www.sunflowermfg.com • 1-800-748-8481
LIMITEDWARRANTY
YEAR
5000 Seriesfinishing attachments.
A tHREE-ROW cOiL tiNE WitH REEL or a four-row coil tine section that can be adjusted for the desired pitch.
tHREE-ROW sPiKE& REEL
A fiVE-ROW sPiKE is regarded as our most maintenance-free finishing attachment.
tHE 4-ROW sPiKE dRAG is designed for heavy residue conditions.
single-PoinT dEPtH cONtROLSingle point depth control is conveniently located for easy adjustments and offers accuracy up to 1/4” (6 mm). No need to adjust depth at each wheel loca-tion or use complicated electronics like competi-tive models.
WHAT IS uHMW?
See page 7
6000 SerieS land FiniSherS
6333 land FiniSher
LIMITEDWARRANTY
YEAR
Disc, condition, incorporate, cultivate, and finish all in one trip. Could you be more efficient and still be
farming? The Sunflower Model 6333 land finisher is tillage intensity at its finest. Easily adjustable and
feature packed, the 6333 fits a wide range of medium horsepower tractors.
Note: Specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.
6000 series LANd fiNisHERsWORKiNGWidtHsft-in (m)
17’-4” (5.3) & 20’-4” (6.2)21’-9” (6.6) to 36’-9” (11.2)36’-9” (11.2) to 42’-9” (13)
NO. OfWidtHs
263
sHANKsPAciNGin (mm) 9” (229)9” (229)9” (229)
MOdEL NuMBER
62216333
6433 sW
tRANsPORtWidtHft-in (m)
13’-6” (4.1) & 15’-4” (4.7) 13’-4” (4.1) to 17’-6” (5.3)14’-6” (4.4) to 17’-6” (5.3)
tRANsPORtHEiGHtft-in (m)
11’-6” (3.5) & 13’-1” (4)11’ (3.4) to 15’-1” (4.6)
14’ (4.3)
Est. WEiGHt lbs (kg)
8772 (3979) & 9315 (4225)12250 (5557) to 17290 (7843)21175 (9605) to 22500 (10206)
PreCision siNGLE-POiNt dEPtH cONtROL
The single-point depth control can be operated from the ground and does not require that the operator climb on the frames to adjust depth.
6000 Series land Finisher features.
PreCisefRAME LEVELiNG
Precise leveling of the frame can be accomplished with the easy accessible screw-type adjust-ment.
oPTional hyDrauliCGANG AdjustMENt
Enables the operator to adjust for different residue conditions from the trac-tor seat. The disc gang will adjust from 2” (51 mm) below the sweep to 5” (127 mm) above.
heaVy-DuTy sPRiNG cusHiONEd MOuNts
For protection against obstructions, the springs also allow the gangs to penetrate more uniform-ly and prevent gouging in ditches or terraces. Adjustable from 2” (51 mm) below to 5” (127 mm) above the cultivator sweeps. Either manual or hydraulically adjustable.
6000 Seriesfinishing attachments.
www.sunflowermfg.com • 1-800-748-8481
TransPorT LOcK
The unique Sunflower trans-port lock is activated with-out having to climb onto or beneath the machine—just pull (or push) the handle to engage (or dis-engage) the lock.
uhMwHiNGE BusHiNG
UHMW hinge bush-ings with flanges do not require daily greasing, protect against tear out of hinges and minimizes risk of hinge freeze-up. The UHMW flange also prevents metal-to-metal wear between frame con-nections, cushions high-stress hinge areas and quiets fold operation.
heaVy-DuTy disc GANG AssEMBLiEs
• 1 3/4” (44 mm) diameter industrial- sized gang shafts.• 20” (508 mm), 1.32” (34mm) concavity disc blades either 6 (6mm) gauge or 1/4” (5mm) thick.• 7 1/2” (191 mm) disc gang spacing with steel spools.• Self-aligning flangette disc gang bearings.• Individually adjustable disc blade scrapers.
walking tANdEMs
Walking tandems help provide a smoother ride even in rough conditions allowing a more uniform working depth to be maintained and providing the ultimate in incorpora-tion. The walking beams rotate on long life, tapered roller bearings and heavy-duty spindles.
LIMITEDWARRANTY
YEAR
A tHREE-ROW cOiL tiNE WitH REEL or a four-row coil tine section that can be adjusted for the desired pitch.
cHOPPER REEL ANd tHREE-ROW sPiKE attach-ment is considered our most aggressive attachment.
A fiVE-ROW sPiKE is regarded as our most maintenance-free finishing attachment.
siX-ROW HiGH REsiduE sPiKE HARROW is designed for heavy residue conditions.
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
WHAT IS uHMW?
See page 7
7000 SerieS Soil condiTionerS
7232 Soil condiTioner
LIMITEDWARRANTY
YEAR
MOdELNuMBER
7212
7232
7252
7000 series sOiL cONditiONERs
NO. Of WidtHs
4
11
12
NO. Of sEctiONs
1
3
5
WORKiNGWidtHsft-in (m)
15’ (4.6) to 22’-6” (6.9)18’ (5.5) to 37’-6” (11.4)32’-6” (9.9) to
56’ (17.1)
REELdiAMEtER
in (mm) 17” (432)
17” (432)
17” (432)
tRANsPORtWidtHft-in (m)
16’ (4.9) to23’-6” (7.2)
13’-6” (4.1) to 18’-10” (5.7)17’-4” (5.3) to
19’-10” (6)
tRANsPORtHEiGHtft-in (m)
NA
8’-10” (2.7) to15’-6” (4.7)
11’-3” (3.4) to15’ (4.6)
Est.WEiGHtlbs. (kg)
2781 (1261) to 3224 (1462)
3890 (1765) to 6920 (3139)
6220 (2821) to 10192 (4623)
Whether you’re pulling a Sunflower 7000 Series soil conditioner behind a primary or secondary tillage tool, the results
are the same – Improved effectiveness of the host machine and enhanced efficiency of the operator. No one else
offers the exclusive features found standard on the Sunflower 7000 soil conditioner. Wings that flex both up and 10
degrees below level. Adjustable wing sections that allow the soil conditioner to be tailored to the width of the host
machine. Overlapping gangs to condition soil completely across the entire machine. And you won’t find C-Flex-
mounted, Chevron reels on the competition either!
heaVy-DuTy REEL dEsiGN
Utilizes 1-1/2” (38 mm) solid gang shaft and large greasable triple-lip sealed trunnion bearings insure a longer reel life and less chance of bending when encountering field obsta-cles. The large 1-1/2” (38 mm) gang shaft resists flexing and stretching dur-ing use or while tighten-ing.
7000 Series Soil conditioner features.
C-fleX™ HANGERs
Sunflower utilizes C-Flex™ hangers to mount reel gangs to the frame. This design provides longer life to the springs & pivot points. C-Flex hangers provide a consis-tent down pressure on reels while furnishing cushion to the frames.
heaVy wall tuBiNG
Heavy 4” x 4” x 1/4” (101 mm x 101 mm x 6 mm) tubing makes up most of the frame work with 3” x 5” (76 mm x 127 mm) and 3” x 6” x 1/4” (76 mm x 152 mm x 6 mm) tubing used to build the hitches. The built-in weight from the heavy frame provides down pressure of up to 170 lbs. (77 kg) per foot, producing an aggressive attitude toward clods, root balls and leveling stub-born fields.
oVerlaPPing REELs
All conditioning reels over-lap for complete firming and leveling purposes. This is an exclusive fea-ture to the 7200. “Others” simply let strips go un-conditioned. Operators have reported late ger-mination in these “strip” areas.
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
complete your tillage tool’s performanace
www.sunflowermfg.com • 1-800-748-8481
aDjusTaBle lengTh anD wiDTh of PuLL HitcH
Gang width and length of pull hitch are fully adjust-able to allow the soil condi-tioner to be tailored exactly to the host machine. The hitch can be lengthened or shortened to accommo-date attachments and the tillage tool turning radius. Width on most models can be adjusted up to 30 inches (762 mm) to match cutting width of host machine.
MainTenanCe-free uHMW POLYMER
The use of UHMW (ultra high molecular weight) polymer technology in high wear and high maintenance areas doesn’t allow metal to metal contact. This results in less wear on the soil condition-er, minimizing costly parts replacement and time-con-suming maintenance.
WEiGHt BARs
Built-in weight bars in outer frames ensure even down pressure across the entire soil condition-er’s frame.
eXClusiVe cHEVRON REEL dEsiGN
• Minimizes vibration, prolonging frame life.• Constant soil contact produces uniform leveling.• Chevron design pulls 30% easier than spiral designs.• Sunflower Soil Science reveals firm, level soils which promote consistent emergence and vigorous early plant growth. LIMITED
WARRANTY
YEAR
• Parallel plumbing for lift and fold. - Easy to operate, only requires 1 SCV (selector control value).
• C-Flex mounted chevron reels. - C-Flex mounted reels use no moving parts which means, less wear and no replacement parts. The exclusive Chevron reels pull 30% easier then conventional spiraling rod reels. The Chevron design also minimizes hopping and vibration that can shorten frame life.
• Flexible wings on folding model. Wings can flex both up and 10 degrees down allowing soil conditioner to follow ground contours without loosing contact with the soil. No other conditioning type tool can claim a 10 degree downward flex.
• Adjustable wing gangs allow up 30 inches (762 mm) of adjustment. - Outside gangs on most models can be slide in up to 15” (381 mm) per side to form a better match to the host implement. Competing machines just hang outside of the host machine increasing chances of clipping a telephone pole or fence post.
cONstANt cONtAct
WHAT IS uHMW?
See page 7
8000 SerieS dumP wagonS
8210 dumP wagon
Variable dumping height saves you time, labor and equipment, and that saves you
money! The Model 8210 can gently transfer up to 40,000 lbs (18,144 kg) of product
into a receiving vehicle at any height from 10’ to 15’ (3m to 4.6 m). No augering and
gentle transfer means less bruising or cracking when you harvest: seed corn, sweet
corn, dry edible beans, sugar beets, vegetables, peanuts and silage.
8020 dumP wagon
8000 Series dump wagon features.
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
www.sunflowermfg.com • 1-800-748-8481
* Dump cycle time depends on hydraulic supply output
8210 duMP WAGON fEAtuREs:
• 1 MINUTE DUMP CYCLE*. • 40,000 lb. (18,144 kg) lifting and dumping capability, variable dumping height and gentle transfer of product. • 12 ga. (3 mm) steel construction. • Variable dumping height gives more versatility at harvest time. The cable system permits topping off a truck load with a partial dump - not restricted to a full dump cycle. Save time with no master/slave cylinders to purge. • Right- or left-hand dump with a 48 degree dumping angle. • Sight windows. • Lighting and marking and transport safety chain for road travel. • Adjustable hitch height and length with swivel type single lip hitch. • 12,000 lb. (5443 kg) capacity crank style tongue jack
8010 & 8020 duMP WAGON fEAtuREs:
• 1 MINUTE DUMP CYCLE* • Pull a Sunflower dump wagon behind a forage chopper to collect and dump forage and haylage into trucks or other receptacles • Single axle & auto-steer models available • Positive action roof opener • The hydraulic system with a cable assist is designed to unload large loads of up to 20,000 lbs. (9,071 kg) quickly and efficiently, even if the load is not distributed evenly.
• Smooth interior box sides • Reinforced box design • Patented hydraulic lock cylinders lock the box at dumping clearance height for solid, complete dumping • The diagonal slide system allows truck drivers close access to the dump wagon and can be extended out to put loads in the center of the truck box.
simple Operation and Low Maintenance Reduce costs and speed up Your OperationIncrease your efficiency of haying and forage opera-tions without unhooking con-ventional wagons or waiting on trucks to return. Pulling a Sunflower wagon will reduce the compaction caused by truck traffic in the fields dur-ing a wet year.
increasing Efficiency of Haying and forage OperationsVariable dumping height saves you time, labor and equipment, and that saves you money! The Model 8210 can gently transfer up to 40,000 lbs (18,144 kg) of product into a receiving vehicle at any height from 10’ to 15’ (3 m to 4.6 m). No augering and gentle trans-fer means less bruising or cracking when you harvest: seed corn, sweet corn, dry edible beans, sugar beets, vegetables, peanuts and silage.
WHAT IS uHMW?
See page 7
9000 SerieS Seed drillS
9530 FerTilizer/grain drill
MOdEL NuMBER
9007 & 9010
9230
9312
9412
9413
9421
9434
9510 f
9530 f
9000 series GRAiN dRiLLs
NO. Of WidtHs
2
2
3
2
4
3
2
2
2
dRiLL dEscRiPtiON
PULL TYPE
AIR DRILL
PULL TYPE
3 PT
3 PT
PULL TYPE
PULL TYPE
3 PT
PULL TYPE
OPENERsPAciNGin (mm)7” (179)
7.5” (191) & 10” (254)
7.5” (191) & 10” (254)7.5” (191)
& 10” (254) 7.5” (191) & 10” (254)
7.5” (191) & 10” (254)
7.5” (191) & 10” (254)
7.5” (191) & 10” (254)
7.5” (191) & 10” (254)
NO. Of sEctiONs
1
3
1
1
1
3
3
1
3
WORKiNGWidtHsft-in (m)7’ (2.1) & 10’ (3)
30’ (9.1) & 40’ (12.2)
7’-6” (2.3) to 15’ (4.6)10’ (3) &
12’-6” (3.84) 15’ (4.57) &
20’ (6.1)20’ (6) to 30’ (9.1)
30’ (9.1) & 40’ (12.2)
15’ (4.57) & 20’ (6.1)
30’ (9.1) & 40’ (12.2)
tRANsPORtWidtHft-in (m)12’ (3.7) & 16’-3” (5)
10’-9” (3.3)
10’-6” (3.2) to18’-4” (5.6)
10’-6” (3.2) & 14’ 4.27)
18.1’ (5.52) & 23’ (7)
13’-11” (4.2)
13’-5” (4.1)
18’-1” (5.52) & 23’ (7)
13’-5” (4.1)
tRANsPORt HEiGHtft-in (m)7’-5” (2.3)
10’-9” (3.3)
5’-4” (1.6)
6’-5” (1.95)
6’-2” (1.9)
9’-6” (2.9)
8’-4” (2.54)
6’-2” (1.9)
8’-4” (2.54)
Note: Specifications may vary slightly based on tires, hydraulic system, or other possible variances.We are continually striving to improve our machines; therefore, these specifications are subject to change without notice.
Est. WEiGHt lbs (kg)
2500 (1134) & 3040 (1379)
24667 (11189) to 30880 (14007)3859 (1750) to 6406 (2906)
3876 (1758) to 5110 (232)
6219 (2820) to 8063 (3657)
10200 (4627) to 17479 (7928)
18267 (8286) to 24536 (11130)8175 (3708) to 10900 (4944)
18267 (8286) to 24536 (11130)
The Sunflower Model 9530 grain drill is equipped with large, divided hoppers carrying
2.4 bu. (85 L) of seed and 120 pounds (54 kg) of dry fertilizer per foot (305 mm).
This unique design not only keeps the seed and fertilizer securely separated and
protected from the elements, but can also be quickly converted to an all seed mode
featuring 3.75 bushels (132 L) per foot (305 mm). Combining the ground-hugging
frame design of 9000 Series drill and the dual role ability of seed and fertilizer, the
Sunflower is the standard in seeding efficiency!
9000 Series Seed drill features.
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
The model 9230 air drill is road ready.
www.sunflowermfg.com • 1-800-748-8481
enD wheel dEsiGN
End wheels are positioned in-line with openers for pre-cise seed depth control even on rough terrain and no-till fields.
DriVe MEcHANisM
Maintenance-free steel sprockets, #50 HD chain, a spring-loaded chain idler and a spring-loaded drive wheel to insure constant soil contact.
oPTional OPENER sHiELd AssEMBLiEs
Align and deflect stalk res-idue to minimize buildup in the drill openers.
Manual AdjustMENts
Seed meter adjustments are made by turning a single star nut which sets all connected meters at the same time, to the same rate.
9230 Series air drill features.
all-PurPose OPENER
Easy to reach settings for varying field conditions. Reset all openers in a matter of minutes without any tools.
PaTenTeD fLAt fAN diVidER HEAd
Minimizes abrupt flow chang-es of conventional vertical divider heads.
AiR sYstEM
Uses a 13” (330 mm) diameter fan that provides a low horsepower draw from the tractor hydrau-lics.
sMooTh POsi-dRiVE tRANsMissiON
A Posi-Drive transmission compensates for changes in ground speed.
Centrally located controls allow the operator to fold and unfold the seeding unit from behind the air cart.
With a narrow transport width, you can be folded up and ready for transport in mini-mum time. Our exclusive tank and frame design offers one of the narrowest setups in the industry.
eXTra heaVy fRAMEs
Heavy-duty 3/8” (11 mm)x 7”x7” (178 mm x 178 mm) main frames are coupled to a 3/8” (11 mm) x 3”x5” (76 mm x 127 mm) opener frame to create a sound foundation for all Sunflower grain drills.
WHAT IS uHMW?
See page 7
The tHREE AXis HitcH
Mounts to the lower two points of your 3-point hitch. This allows greater flexibility between the tractor and drill on rough terrain and improves the handling of heavily loaded seed boxes compared to overloading a draw bar. Available in 9434 & 9530.
DrawBar HitcH
Tongue height adjusted hydraulically clues pivots to follow terrain. Available in 9434 & 9530.
P.O. Box 566 • 3154 Hallie Trail • Beloit, KS 67420FOR MORE INFORMATION:1-800-748-8481 • (785) 738-2261 • FAX (785) 738-2406Internet - www.sunflowermfg.com • E-mail - [email protected]
T h e r e i s o n l y o n e . T h e o r i g i n a l . s u n f l o w e r .
For more information go towww.sunflowermfg.com
PRINTED IN U.S.A. SF09052 RP 09 (01) 5 BAC