timberjack harvester 1470d - proximedia
TRANSCRIPT
T I M B E R J A C K H A R V E S T E R
1470D
The engine hood is divided into two sections to facilita-te maintenance work. The larger front engine hood can be raised with an electrical spindle motor. The new component layout on both the front and rear frames ensures convenient access to all routine service points around the engine and pumps. Fewer service points, e.g. for the bogie oscillation bearing, and extended change intervals for engine oil and fil-ter radically reduce the time needed for maintenance work, thus enhancing overall profitability.
“The tough guy for rough terrain”
To provide maximum stability in really tough conditions,
the 1470D is longer, wider and has more weight for stability
than other Timberjack harvesters. It is the biggest member of
our harvester family and has been redesigned to provide the
same technological advances as its little brother, the 1270D.
Upgraded for serviceability
The 1470D is designed for demanding regeneration harves-ting applications in tough conditions like deep snow, mar-shland, rough terrain and steep slopes. Using the same axles as the Timberjack 1710D forwarder, the 1470D features lar-ger wheels and more ground clearance than earlier models - ensuring optimum performance even in the most difficult conditions.
Fitted with a John Deere engine, and offering a choice of 4 robust harvester heads, the 1470D is poised to boost effi-ciency and meet today’s logging challenges better than ever before.
New size forproductivity
2/3
The unique balanced bogie, only available on Timberjack machines, combined with a low center of gravity, advanced transmission control system and wide tires, provides excellent levels of tractive force and reduces ground impact. This en-sures effortless movement in all conditions. Superior stability allows the use of a longer boom reach thus minimizing the
The big friendly giant
area touched by wheels. The low-emission Deere engine con-forms with the latest emission regulations in both Europe and North America. What’s more, each machine can be supplied with a comprehensive environmental kit and vacuum pump for its hydraulic system, if required.
Not only big in size, the
Timberjack 1470D is also big
in visibility and operator com-
fort. With these vital features
in mind, we aim to see to it
that you reap the maximum
benefits from the 1470D’s
superior power.
The new standardfor visibility!
T I M B E R J A C K H A R V E S T E R
1470D
The Timberjack 1470D furnishes an operator environment which is both functional and comfortable.
The 1470D ensures enhanced visibility in all directions - including backwards. The narrower rear end of the new model improves both working and driving vi-sibility, creating a new standard for har-vester visibility.
The spacious cab has all the ergono-mic innovations you have come to ex-pect from Timberjack harvesters: an ergonomic seat, plus easy-to-use joys-ticks and fingertip controls with the Timbermatic™ 300 system. Additional luxuries like a CD player and a remova-ble lunch box integrated into the cabin door bring the comforts of home to your workplace in the forest.
As cozy as home
4/5
The leveling and turning mechanism provides you with three new degrees of operating freedom: leveling/tilting side-ways, leveling/tilting lengthways, and turning around the vertical axis. These functions are entirely independent and adjustable. As a result, the operator can enjoy all the advantages of a turning cabin without visibility disturbances or knocks caused by boom movements.
The 3 degrees offreedom
Timberjack also sharpens your view with enhanced on-site illumination. The new optional Xenon lights produce the same amount of light as conventio-nal light bulbs, but last five times lon-ger and consume only one-third of the energy. Due to their daylight-like quali-ty, the lights are also particularly gentle on the human eye.
Turning night into day
The leveling and turning cabin enables flexibility and ease of movement on dif-ficult terrain, reduces contact damage and improves operator ergonomy.
The automatic measuring system expertly selects the optimum sawing point. This means operators don’t have to waste valuable time deciding where to cut the trunk, and can con-centrate on monitoring the timber quality instead. A new feed control also optimizes the feeding power without slipping and ensures precise cutting, improving both length and diameter accuracy. As a new Timberjack option, the patented saw control system,
Accuracy, speed and productivity are essential competitive factors in today’s logging business. The Timbermatic™
300 control and measuring system gives you the tools to achieve your produc-tivity goals, and much more. It also
provides you with all the facilities of a modern office - right in the middle of
the forest.
Your office in the forest
T I M B E R J A C K H A R V E S T E R
1470D
Your decision-making tool
FlashCut™, automatically ensures that the sawbar feeding keeps pace with the rotation speed of the saw motor. It keeps the chain speed at an optimal level regardless of the tree species, whether the timber is frozen or not, or sharpness/bluntness of the saw chain. This results in more efficient sawing, crack-free crosscutting and a longer lifetime of the sawbar and chain. FlashCut™ is the trademark for the smartest saw control on the market.
Order-based harvesting requi-
res a control system with accu-
rate measurement, computer
connections and wireless data
transfer. Timbermatic™ 300
is a measuring and control
system which is standard for
the 1470D harvester. This
PC/Windows® based system
neatly integrates the harvester-
head measuring system with
the TMC™ (Total Machine
Control) functions.
A friendly PC world
6/7
Timbermatic™ 300 presents the entire measuring system on one user-friendly color screen. The graphical interface with a two-level menu system is both logical and quick and easy to use. As a PC-based system, the Timbermatic™ 300 allows users to work in a Windows®
environment with familiar software tools, e-mail, maps and GPS programs. The display is user configurable: you select only those parameters and pro-grams you need.
An informationsolution for the future
With wireless data transfer via the Internet or other modern modes of communication, your Timbermatic™ 300 forms a ready-made platform on which to develop an extensive informa-tion system for your machinery. In ad-dition, it converts your forest environ-ment into a fully equipped office, comp-lete with CD-ROM drive, printer etc. Timbermatic™ 300 is available in 12
language versions. A TimberOffice soft-ware package maximizes the utilization of the Timbermatic™ 300 information and enables you to manage business at home.
A new electrically-controlled, com-mon-rail fuel-injected John Deere die-sel engine supplies the 1470D with the same superior power output, but with a torque increase of 25% compared to previous models. The high torque out-put enables simultaneous use of the feed motors and the boom, maximizing your harvesting efficiency. The 1250 Nm tor-
que also allows the harvester to operate at lower rpm, which results in improved fuel economy, increased component life and reduced noise levels. Just as impor-tantly, service intervals for essentials like engine oil and filter change have been extended from 250 hours to 500 hours.
1250 Nm for superior power
The 1470D can also afford to
be big-headed when it comes
to innovation power. Together
with its proven technology and
the world’s most competitive
harvester heads, this machi-
ne is geared up to make your
production figures bigger than
ever.
Enlarging yourproduction figures
T I M B E R J A C K H A R V E S T E R
1470D
The 1470D has a 50 cm longer wheel-base than the 1270D series machi-nes and a broader width of 3.0 m. Furthermore, the 1470D features a lar-ger balanced bogie unit and a strong boom achieving a full 10 m reach even when felling heavier timber. These fea-tures, combined with the machine’s low center of gravity, provide a highly stable platform during both harvesting work
3.0 m of stability24/28 MPa for peak performance at brief intervals
8/9
The 1470D’s hydraulic system with a unique 24/28 MPa dual working pressu-re system generates higher hydraulic oil pressure for brief intervals in situ-ations where greater power is needed, for instance at the start of feeding and in sawing. The higher pressure delivers more power to sawing thus eliminating cutting cracks and to the start of feeding ensuring efficient operation.
and locomotion - particularly on steep slopes. The stability is exceptionally high even when the boom is fully exten-ded. To further improve its performance on steep slopes, the 1470D exerts a trac-tive force of 190 kN, the highest on the market.
T I M B E R J A C K
H A R V E S T E R
Technical Data
Dimensions
Length ............................ 7700 mmNominal Width ................ 3000 mm (650 tires)
3040 mm (750 tires)
Height............................. 3830 mm (3980 mm with leveling cabin)
Transportation height ...... 3830 mm (3850 with leveling cabin, tilted)
Ground clearance............ 710 mmNote! Measurements are nominal and may vary due to tire manufacturing tolerances.
Weight
Depending onequipment, min............... 18800 kg
Engine
John Deere JD6081 HTJ 04 diesel engineCylinder volume.............. 8.1 litersPower output .................. 180 kW / 1200-2000 rpmTorque ...............................1250 Nm / 1400 rpmFuel tank ........................ 480 lViscous fan drive
Transmission
Hydrostatic-mechanicalTwo-speed gearboxSpeed ............................. 0-24 km/hTractive force.................. 190 kN
Steering
Articulated frame steeringSteering angle ................ ±42°Electrical proportional off-road steering
Brakes
Service and working brakes are hydraulically actuated, oil-immersed, multiple-disc brakes. Spring-actuated parking and emergency brakes
Axles
Front: Bogie axle with electro-hydraulic differential lockRear: Single rigid axle with electro-hydraulic differential lock
Hydraulic system
Load-sensing systemPump displacement .....................190 cm3/rFlow ............................................304 l / 1600 rpmWorking pressure.........................24 / 28 MPaControl system.................................Timbermatic™ 300Hydraulic oil system capacity.......~ 300 l
Electrical system
Voltage ........................................24 VBatteries ......................................2 x 140 AhAlternator.....................................140 AWorking lights: 14 twin power and 4 single lamps on the boom, 30 lux in the working area of the boom
Tires
Front: ...........................................650x26,5 or 750x26,5Rear:............................................700x34
Boom
Parallel motion knuckle boom TJ 210 H 90, 97 or 115Reach with head..........................9.3, 10 or 11.8 mGross lifting torque ......................178 kNmGross slewing torque ...................43.6 kNmTilt angle...................................... -13°– +25°Slewing angle ..............................220°
Technology that beats the rest
1470D
TAKE CONTROL
MAKEDECISIONS
BOOST PROFITS
THINK GREEN
398
0 le
velin
g ca
b
10/11
A head for work
Timberjack is also the world-class name for high-quality and heavy-duty har-vester heads. Their superb performan-ce and durability has been demonstra-ted in all kinds of work applications all over the world for years. The new 1470D comes equipped with 4 alterna-tives according to your specific requi-rements.
The new 1470D can be equipped with the extremely robust H762 or 758 har-vester heads designed for regenerati-on harvesting. Thanks to the 4-wheel drive and short frame construction, the 758 is well suited for bent timber and strong branches. The H762 has the Supercut™ saw unit with integra-ted chain lubrication and tensioning as standard. On the 4-wheel drive heads the Supercut is an optional feature.
*) Depends on feed motor size
The information in this brochure was correct at the time of publication and is provided as a guide only. Not all options may be available worldwide.
Please contact your Timberjack dealer to determine the options available in your country.
Model 762C H762 H754 758Max opening upper knives, mm 550 770 560 680
Max opening feed rollers, mm 606 620 560 700
Delimbing diameter, tip to tip, mm 430 480 400 480
Max cutting diameter, mm 650 650 550 / 620 650
Weight, incl. rotator and link, kg 1270-1350 1215-1275 880-930 1080-1150
Feed force at 24 MPa gross, kN*) 23.4-28.0 25.1-33.8 16.0-25.2 22.0-27.0
Feed rollers, pcs 2 2 4 4
Feed speed, m/s 0-4.5 0-5.0 0-5.0 0-4.7
Chain speed, m/s 40 40 40 40
Operating pressure max, MPa 24 / 28 24 / 28 24 / 28 24 / 28
Saw bar, cm 75 / 80 82.5 64 / 75 75
Max reach with the TJ 210 H boom, m
9.3 10 11.8 10
Cab
Spacious, well-lit and comfortable cab with an ergonomic seat and low-effort mini-grip controls. Efficient heating and air conditioning. Excellent visibility on all sides and up to the tree tops. Noise level meets ISO standards.Radio/cassette/CD-player. Light green polycar-bonate windows. Safety tested according to ISO standards.
Timberjack cab-leveling option
The tilting cab is mounted on a leveling platform on the front frame that provides for three degrees of freedom. Tilting sideways 15°, forward and backward 11°. Turning +/- 50°. Tilting functions are independent, and can be controlled individually or in combination. The leveling and turning can be actuated automatically or manually.
Measuring system
• Timbermatic™ 300, PC/Windows®-based measuring and control system integrates the harvester head measuring and control system with the TMC base machine control system
• Modular based CAN-bus reduces the amount of cabling needed, ensuring accuracy and reliability
• Easy to use, information is displayed on large color display with clear and userfriendly icons and two-level menus, keyboard with integrated mouse
• Highly automated harvester head control software, including e.g. automatic controls for sawing, harvester head tilt-up, pressure adjust-ments of the delimbing knives and feed rollers, stem feed, color marking and stump treatment
• Compact and efficient design of the push buttons, joysticks and keyboard for excellent ergonomics
• Easy calibration of length and diameter measu-ring system
• Full tree prediction, price and/or distribution and/or limitations –based optimization, unlimi-ted number of sites
• A4 color printer for printing maps, production reports, work and repair statistics, production instructions, calibration history, stem data, log table, machine parameters
• User friendly interface, help and troubleshooting• CD-ROM, floppy disc and USB port for data
transfer• E-mail software installed• SilviA program• Software for optional electronic caliper• Easy to install and update software
Optional equipment
• Leveling and turning cabin• CD-changer• Xenon working lights• Thinning lights• Sun blinds• Preheater for cabin, engine and hydraulic oil tank• Refill pump for fuel• Refill pump for hydraulic oil• Vacuum pump for hydraulics• Hydraulic oil off-line filter• Chains, tracks• Spare wheel• Electronic calipers• Colour marking system• Stump treatment device• Automatic boom leveling• Flashcut saw control• Boom damping• Environmental kit
Note! Standard and optional equipment may vary. For details contact your local dealer.
Head descriptions
TAKE CONTROL
Timberjack is no ordinary forest machine. It is the right and “bright” partner that makes you - the operator - a better profes-sional in forest operations. When you invest in Timberjack, you are not only getting a robust high-production machine but also a complete package of forest management capabilities.
MAKE DECISIONS
The state-of-the-art control system automatically performs all instructed travel and work functions with incredible speed and precision.
BOOST PROFITS
Ensuring high output in various harvesting applications, Timberjack delivers optimum results whatever the task. It gives you the freedom to move from one job to the next without mis-sing a beat. Geared up for outstanding performance, Timberjack is your razor-sharp business partner.
THINK GREEN
You can always depend on Timberjack for an environmentally sound solution. It’s your strongest ally when it comes to sustaining both a healthy residual forest and a reputation for responsible forest stewardship.
www.timberjack.comThis brochure may include features or options not available in all markets.
® Timberjack, Timbermatic, TMC, TimberOffice, FlashCut and the donkey symbol are registered trademarks of Timberjack Inc. Supercut™ is a trademark of Hultdins System Ab.
Imageneering/Printed in Finland by Offset Ulonen. EN/05/03