1

TIMING MAG: 2016 EDITION • VALID TO 31.12.2016

www.welzhwerkzeug.com • @welzhwerkzeug • facebook/welzhwerkzeug • youtube/welzhwerkzeug

2

Engine Timing Tool Kit for BMW , N13/N1862672-BGS

WZW338.220

BMW

For checking and setting camshaft timing for e.g. working on the valve train, renewing the cylinder head gasket, etc.

Suitable for following BMW models: 114i (F20) (N13B16) from 07/2012 116i (F20) (N13B16) from 09/2011, 316i (F30) (N13B16) from 11/2012, 118i (F20) (N13B16) from 09/2011, 320i EfficientDynamics (F30) (N13B16) from 11/2012.

To be used as BMW OEM: 117440, 119340, 496709, 119590

7, Piece Engine Timing Tool Set , BMW N2062637-BGS

WZW339.380

BMW

For checking and setting camshaft timing when e.g. working on the valve train, renewing the cylinder head gasket, etc.

Suitable for following BMW models: 320i (F30) (2.0L N20B20) as of 2012, 328i (F30) (2.0L N20B20) as of 2012, X1 xDrive20i / sDrive20i (E84) (2.0L N20B20) 2010, 2012

To be used as OEM 83302212831, 83302212830, 83302219548, 119340.

Engine Timing Tool Kit for BMW Engines , N51/N52/N53/N5462619-BGS

WZW340.370

BMW

For engine codes: N51, N52 , N53 , N54

Contains important tools, e.g.: camshaft assembling/disassembling, timing belt change, checking and adjustment of valve timing camshaft locking tool, to be used as OEM 114280, Transmitter wheel locking tool, to be used as OEM 114290, Crankshaft locking tool to be used as OEM 110300

Suitable for following models:, 128i, 130i, 135i , E81 / E82 / E87 , 323i, 325i, 328i, 330i, 335i , E90 / E91 / E92 / E93 , 523i, 525i, 528i, 530i , E60 / E61 , 535i, 630i , E63 / E64 , 730i , E65 / E66 , X3 2.5 / 3.0 , E83 , X5 3.0 , E70 , Z4 2.5 / 3.0 , E85 / E86

BMW

3

Engine Timing Tool Set for BMW 1.6L62614-BGS

WZW341.190

BMW

Suitable for chain driven petrol engines with Vanos.Engine codes N40, N45, N45T (B16).

For following BMW Models: , 116 1.6 i E81/ E 87 , 316 1.6 i E46 / E90 , 316 1.6 Ci E46 , 316 1.6 ti E46 ,

Includes following tools: , flywheel locking pin to be used as OEM 119190 , timing chain pre, tensioning tool to be used as OEM 119340, 119340, 119341 , camshaft alignment tool (inlet) to be used as OEM 117252 , camshaft alignment tool (exhaust) to be used as OEM 117251 , VANOS alignment tool to be used as OEM 117260

Engine Timing Tool Set For BMW N42/N46/N46 T8834-BGS

WZW342.230

BMW

For adjusting / checking the engine timing and vanos unit

Applications:, E81 (116i / 118i / 120i) , E87 (118i / 120i) , E88 (120i) , E46 (316i / 316ti / 316i / 318ci / 318ti) , E90 (318i / 320i) , E91 (318i / 320i) , E92 (320i) , E93 (320i) , E60 (520i) , E83 (X3 2.0) , E85 (Z4 2.0)

Includes: pre, tensioning tool, to be used as OEM 119340 , sensor gear alignment tool, to be used as OEM 119350 , inlet camshaft locking tool, to be used as OEM 119292 , exhaust camshaft locking tool, to be used as OEM 119291 , flywheel locking pin, to be used as OEM 115120 , camshaft alignment tool, to be used as OEM 119270 , screw for camshaft locking tool, to be used as OEM 119293

Double VANOS Adjustment Tool For BMW M52TU / M568743-BGS

WZW345.120

BMW

For setting the vanos units on BMW M52TU / M54 / M56 engines

Includes following special tools: , camshaft locking bar, to be used as OEM 113240 , pressure adapter, to be used as OEM 113450 , secondary sprocket mounting device, to be used as OEM 116180

BMW

4

Engine Timing Tool Set for BMW , M52, M54, M60, M628534-BGS

WZW343.630

BMW

For setting and checking the engine timingSuitable for the following BMW models: , 320 E46, 323 E46, 325 E46 , 328 E46, 330 E46, 520 E39, 520 E60, 520 E39, 523 E39, 525 E39, 525 E60, 528 E39, 530 E34, 540 E34, 535 E39, 530 E39, 530 E60, 728 E38 , 730 E65, 730 E35, 730 E32, 735 E38, 740 E32, 740 E38, X3 E83, X5 E53, Z3, Z4 E85 Camshaft Adjusting Tool (M52, M54) to be used as OEM 11 6 150 , Vanos Tool (M52, M54) to be used as OEM 11 3 450 , Camshaft Adjusting Tool Cyl. 1, 4 (M60, M62) to be used as OEM 11 2 445 / OEM 11 2 441 , Camshaft Adjusting Tool Cyl. 5, 8 (M60, M62) to be used as OEM 11 2 442 / OEM 11 2 446 , Chain Tensioner (M52, M54) to be used as OEM 11 4 220 , Chain Tensioner (M60, M62) to be used as OEM 11 4 230 , Crankshaft Adjusting Tool to be used as OEM 11 2 300 , Adaptor (M52, M54) , Tensioner Pin (M60, M62)

Engine Timing Tool Set BMW , N434075-WW

WZW344.280

BMW

For checking and adjusting the engine timing , BMW models: 1 Series E81 / E82 / E87 / E88, 2006, 2012 , 3 Series E90 / E91 / E92 / E93, 2006, 2012, 5 Series E60 / E61, 2007, 2010.

Applications N43 (B16A/AA), N43 (B20A), N43 (B20AA) N43 (B20AY), N43 (B20KO), N43 (B20UO) ,

Included: chain tensioner tool , camshaft locking tool , adjusting tool for vanos , balance shaft locking tool , crankshaft locking pin , chain tensioner locking pin , to be used as OEM tools: 113340, 118690, 118691, 118692, 118693, 119340, 119341, 119342, 118710, 118711, 118712, 118700, 115120

Engine Timing Tool Set For BMW , M42/M508747-BGS

WZW346.140

BMW

For adjusting the engine timing after e.g. changing the timing chain or cylinder head gasket

Suitable for BMW engines M42 and M50

Included: camshaft locking tool , flywheel locking tool , to be used as OEM tools 113240 and 112300

BMW

5

Engine Timing Tool Set for BMW , M60/M628748-BGS

WZW347.240

BMW

For adjusting the engine timing after e.g. changing the timing chain and cylinder head gasket ,

Applications: BMW engines M60 and M62

Included: , camshaft locking tool , flywheel locking tool , to be used as OEM tools 112441, 112442, 112445, 112446, 112300

Injector Pump Sprocket Puller Set For BMW , M47/M578750-BGS

WZW348.140

BMW

Puller for BMW injection pump sprocket , is required for the disassembly of diesel injection pumps , includes puller tools for the following applications:

4, cyl. and 6 cyl. BMW engines M41, M51 and identical engines in Vauxhall Omega 2.5 TD (M51)

For removing the sprocket from the pump shaft and holding the pump wheel in the assembly position,

Applications: BMW engines M47, M47TU, M57, M57TU, M50, M60, M62,

Included OEM: 135120 , 135190 , 135191 , 135192 , 114230

Opel/Vauxhall

Engine Timing Kit for BMW M62 with VANOS8602-BGS

WZW349.380

BMW

For checking and adjusting the engine timing

Applications.: M62B35, M62B44, M62TUB44

Included: vanos valve socket to be used as OEM 116420 , chain block to be used as OEM 117380 , socket for turning the vanos camshaft to be used as OEM 116440 , camshaft locking tool to be used as OEM 116450 , camshaft locking tool to be used as OEM 112440 , timing chain tensioning tool to be used as OEM 114230 , crankshaft locking tool to be used as OEM 112300

BMW

6

Engine Timing Tool Kit for BMW Engines62615-BGS

WZW352.310

BMW

For engine codes: M40, M43, M42, M44, M50, M52, M54, M56 (engines with double camshafts)

Applications: BMW: 3, 5, 7, X3, X5, Z3, Z4 / Series (E30, 31, 32, 34, 36, 38, 42, 46, 53, 60, 61, 65, 66, 83, 85)

Included: M40 timing belt change, valve timing of camshafts, crankshaft locking tool, to be used as OEM 112300, camshaft locking tool, to be used as OEM 113190, camshaft locking tool, to be used as OEM 113240, chain pre, tensioning tool, to be used as OEM 114220, camshaft sprocket turning tool, to be used as OEM 115490, air adapter, to be used as OEM 113450, chain tensioner locking pin set, to be used as OEM 113290 consisting of locking clip, to be used as OEM 113291 and locking pin, to be used as OEM 113292

Camshaft Bearing Cap Tool for BMW N51/N528794-BGS

WZW350.350

BMW

For installation of the exhaust camshaft bearing strip , is used when replacing the camshaft.

Included: press down tool, 2nd cylinder to be used as OEM 114 461 , M7 screws (2 pcs.) to be used as OEM 114 462 , thrust piece (6 pcs.) to be used as OEM 114 463 , to be used in combination with BGS 62619

Engine Timing Tool Set For BMW N6362627-BGS

WZW351.250

BMW

For adjusting the engine timing when replacing timing chain, cylinder head repair, replacing the cylinder head gasket, etc. , Included: crankshaft locking tool to be used as OEM 118570 / 119190 , camshaft locking tool to be used as OEM 119890. Consisting of: thumbscrew to be used as OEM 119891, depressing bar to be used as OEM 119892, snap gauge for intake and exhaust camshaft to be used as OEM 119893, spacer to be used as OEM 119894.

BMW

7

Engine Timing Tool Kit for BMW Diesel Engines62616-BGS

WZW353.280

BMW

For engine codes: -M41, M51, M47 - M47 TU/T2, M57 TU/T2 2.0l/3.0l 1998-2008 - 204D3 / Td4, Td 6 - M47R Applications: BMW: 1, 3, 5, 6, 7, X3, X 5 (type series E34, 36, 38, 39, 66, 83, 90, 91, 92, 93) - Landrover: Range, Freelander - Rover: 75, MG, MG ZT - Vauxhall / Opel: Omega-B

Included: crankshaft alignment pin to be used as OEM 112300 - camshaft alignment tool to be used as OEM 116320 - camshaft alignment tool to be used as OEM 116320 consisting of: - camshaft alignment to be used as OEM 116321 - camshaft alignment tool holder to be used as OEM 116322- tensioner locking pin to be used as OEM 113340- chain sprocket puller to be used as OEM 135190 (135191+135192).

Vauxhall/Opel, Land Rover, Rover

Engine Timing Tool Set For BMW - N42/N461059-WW

WZW952.275

BMW

This kit has been designed to allows setting and adjusting of the timing on BMW models with N42, N46, B18/-A, B20/-A/-B engine codes.

Applications: BMW: 1, 3, 5, X3, Z4 (models: E87-46-60-85-83-90-91)Contains important tools for camshaft assembly and disassembly also for valve timing of camshafts.

Included OEM tools: OEM 119310, OEM 119320, OEM 119302, OEM 119301, OEM 119290, OEM 119302, OEM 11940, OEM 119390, OEM 119350, OEM 119390, OEM 119270, OEM 112300, OEM 119320, OEM 119290, OEM 119290, OEM 119190, OEM 119320, OEM 119330

BMW

BMW Timing Tool Set S541241-WW

WZW954.181

BMW

Designed for setting and adjusting the camshaft timing when installing the VANOS adjustment unit on BWM S54 engines.

Applications: BMW M3 Cabriolet (00-06)Sports Coupe (99-06), CSL Sport Coupe (03-04)

OEM Tools inlcuded: 119140, 119130, 119170, 117340, 115100, 17160, 112300

8

Diesel Injection Fuel Pump Puller BMW4012-WW

WZW955.26

BMW

Specially designed to hold the sprocket/chain when dissembling the VP44 injection pump and high pressure pump fitted to BMW M47, M47T2, M47TU, M57 & M57TU engines also Land Rover TD4.

Applications BMW 318D, 320D (E46) 1988-2005BMW 318TD, 320TD, 525D, 530D, 530, 535 (E60-E61) 2000-2006

OEM3 5 191, 13 5 192

Timing Tool Set for BMW - N47/574161-WW

WZW956.66

BMW

Designed for setting and adjusting the engine timing on N47, N47s, N47, N57s engines found in BMW models. This kit is needed when dismantling and mounting of the camshaft replacing the timing chain and cylinder head gasket. Applications: 116d 118d 120d 123d, type E81 E82 E87 E88 F20316d 318d 320d 325d 330d type E90 E91 E92 E93 F30520d 525d 530d 530d GT 535d 535d GT M550d, type E60 E61 F07 F10 F11640d type F12730d 740d 750d, type F01X1 1.8d 2.0d 2.3d, type E84X3 1.8d 2.0d 3.0d, 3.5d type E83 F25X5 3.0d 4.0d M5.0d, type E70X6 3.0d 4.0d M5.0d, type E71

BMW

Specially Designed for Mercedes

For renewing and riveting timing chainsOld timing chain is fed in with help of the new chainA dismantling of the timing chain case is often not requiredSuitable for Mercedes models with simplex and duplex timing chain with 4 mm chain boltOEM: 112589096300, 602589003900, 602589023300, 602589024000, 602589056300, 602589056301

Timing Chain Riveting Tool

8501-BGS WZW956.260

Adapter for Simplex Chains

8501-1-BGS

9

Timing Tool Set for BMW - N47/57

Timing Tool Set for FIAT and PSA Engines8413-BGS

WZW357.370

Fiat

Includes important tools for adjusting the engine timing

Applications: Fiat - 2,2 JTD 4HV - 2,3 JTD F1AE0481D 120PS - 2.3 JTD F1AE0481D 127PS - 3.0 JTD -

PSA - Puma 22DT 4HV 100PS - Puma 22DT 4HV 120PS - F30DT

PSA

Timing Tool Kit for Fiat 2.3 JTD8422-BGS

WZW358.70

Fiat

Applications: Citroen Relay/Jumper III - Fiat Ducato - Iveco Daily (03-10), Daily/EcoDaily (09-11) - Peugeot Boxer III (06-12) - 2.3D, 2.3 JTD

Engine Codes: F1AE0418A, F1AE0481B, F1AE0481C, F1AE0418D, F1AE0481F, F1AE0481FA, F1AE0481G, F1AE0481H, F1AE0481HA, F1AE0481N, F1AE0481UA, F1AE0481VA - 3.0JTD F1CE0481A, F1CE0481B, F1CE0481D, F1CE0481F, F1CE0481H, F1CE3481M - 3.0HDi F30DTE, F1CE0481D, F1CE3481DM, F1CE3481N

Included: camshaft locking pin, 2 pc, crankshaft locking pin, camshaft locking pin, 2 pc, crankshaft locking pin

OEM: - Fiat 99360187, 99360614, 99360615, 1860617000, 1860815000, 20000180200 - Citoren/Peugeot 0191-2A, 0191-2B, 0191-2J, 0191-2K

PSA, Iveco

FIAT

Fiat/Alfa Master Timing Tool Set

1074-WW

WZW358.255

Fiat

For setting and adjusting the timing on a range of Fiat and Alfa Romeo models.

OEM Tools1 860 847 000, 1 860 875 000, 1 870 697 000,1 860 895 000, 1 895 879 000, 1 860 898 000,1 860 992 000, 1 860 992 000, 1 863 000 (8mm)1 860 771 000, 1 860 161 000, 1 860 874 0001 860 874 000, 1 860 876 000, 1 860 845 0001 860 876 000, 1 860 965 000, 1 860 901 0001 860 905 010, 1 860 987 000,1 860 985 000

Lancia, Alfa Romeo

10

Engine Timing Tool Set For Fiat / Ford / Suzuki, 1.3 CDTi / TDCI8669-BGS

WZW359.130

Fiat

Applications: Fiat Punto 1.3 JTD Multi-Jet 188A9.000 2003-2007 - Panda 1.3 JTD Multi-Jet 169A1.000 & 188A8.000 2003-2009 - Idea 1.3 JTD Multi-Jet 199A3.000 & 188A9.000 2004-2006 - Doblo 1.3 JTD Multi-Jet 188A9.000 2004-2006 - Doblo Cargo 1.3 JTD 188A9.000 2004-2006 - Opel (Vauxhall): Agila 1.3 CDTi Z13DT 2003-2008 - Corsa C 1.3 CDTi Z13DT 2003-2007 - Combo C 1.3 CDTi Z13DT 2003-2009 - Corsa D 1.3 CDTi Z13DTH & Z13DTJ 2006-2009 - Astra H 1.3 CDTi Z13DTH 2004-2009 - Tigra B 1.3 CDTi Z13DT 2004-2009 - Meriva 1.3 CDTi Z13DT & Z13DTJ 2004-2009 - Suzuki: Ignis 1.3 CDTi Z13DT 2003-2009 - Wagon 1.3 CDTi Z13DT 2003-2009 - Swift 1.3 CDTi Z13DT 2003-2010 - Ford KA 1.3 TDCi

OEM 1871000200 OEM 303-1469 Opel / Vauxhall OEM KM-662-C - crankshaft adjustment tool, to be used as Opel (Vauxhall) OEM EN 46785 Opel (Vauxhall) OEM KM 955, Suzuki 09912-38300 - camshaft adjustment tool, to be used as Fiat OEM 1871000900 / 1860985000 Ford OEM 303-1472, Opel (Vauxhall) OEM EN 46781 Suzuki OEM 09917-68610 - chain tensioning lever, to be used as Fiat OEM 1870900400 - crankshaft locking tool, to be used as Fiat OEM 1870900300.

Ford, Suzuki, Vauxhall/Opel

Engine Timing Tool Set For Fiat / Alfa, Lancia 1.2 16V4077-WW

WZW361.130

Fiat

Used to adjust the engine timing during timing belt replacement, cylinder head repair, replacement the cylinder head gasket, etc. -

Applications: Alfa Romeo, Fiat and Lancia 1.2 16V / 1.4 16V / 1.4 T-Jet

Engine Codes: 169A3000, 179B9000, 182B2000, 188A5000, 192B2000, 198A1000, 198A4000, 199A6000, 199A8000, 843A1000

Included: crankshaft locking tool (with) screws M6x30 and 3 pcs M8x16) to be used as OEM 2.000.004.500 - camshaft adjusting tool (1 pair) to be used as OEM 1.860.985.000 - adjusting tool for piston height to be used as OEM 1.860.992.000 - adjusting tool for timing belt tensioner to be used as OEM 1.860.987.000 - locking tool for camshaft sprockets (with screw M8x30) to be used as OEM 2.000.015.800

Alfa Romeo

FIAT

11

Engine Timing Tool Kit For Fiat 1.9JTD62665-BGS

WZW360.100

Fiat

For adjusting the engine timing when e.g. changing the timin belt, cylinder head repairs, etc.

Applications: Opel 1.9 CDTi engines Z19DT, Z19DTH, Z19DTJ - Alfa Romeo 1.9 and 2.4 L Diesel

Engine Codes: 323.02, 371.01, 342.02, 325.01, 362.02, 182B9.000, 937A2.000, 937A3.000, 192A5.000, 192B1.000, 937A4.000, 937A5.000, 939A2.000, 939A1.000, 939A7.000, 939A8.000, 839A6.000, 841C.000 - Fiat 1.9 and 2.4 L Diesel with engine codes: 182B4.000, 182B9.000, 185A6.000, 186A6.000, 186A8.000, 186A9.000, 188A2.000, 188A7.000, 188B2.000, 192A1.000, 192A3.000, 192A5.000, 192A8.000, 192A9.000, 192B4.000, 192B5.000, 198A2.000, 198A3.000, 198A6.000, 199A5.000 223A7.000, 937A5.000, 939A1.000, 939A2.000, 939A3.000, 939A7.000 - includes Included: crankshaft locking tool to be used as OEM Opel EN-46788 / Fiat 1.860.905.000 / 1.860.905.010 - flywheel locking tool to be used as OEM Fiat 1.860.898.000 - camshaft locking tool to be used as OEM Opel EN-46789 / Fiat 1.870.896.900 - locking pin Ø 3.7 mm x 70mm to be used as OEM

Petrol Engine Setting-Locking Tool Set For Belt Drive4160-WW

WZW976.76

Fiat

For setting and adjusting the timing on Ford 1.2, 1.4L 8v engines.

Applications: Fiat: 500 (07-12), Doblo/Cargo (05-10), Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12)Lancia: Ypsilon (06-11), Musa (05-12) Ford: Ka (09-12)Engine Applications: Fiat: 1.2/1.2 Dualogic, 169A4.000, 188A4.000 (EVO2), 199A4.000, 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG, 199A7.000, 350A1.000Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000Ford: 1.2 Duratec, 169A4.000 (FP4)

OEM ToolsCrankshaft Locking Tool:OEM 2.000.004.500 on Fiat/Lancia - OEM 303-1480 on FordCamshaft Setting Tool to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on FordCamshaft Sprocket Locking Tool to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on FordCamshaft Cover Aligner to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford

Ford, Lancia

FIAT

12

Mounting Tool Kit for Stretch-Fit Poly-V-Belts8454-BGS

WZW334.30

Ford

Allows a damage-free mounting of Poly-V-belts on belt systems without tensioner 2 different sizes for wide range of applications

Crankshaft Locking Tool for Set for Ford Transit 2.2 TDCi8896-BGS

WZW335.60

Ford

Suitable for Ford Transit 2.2 until 2006For locking crankshaft and flywheel Allows the TDC sensor position to be set after working on cam chain drive system Crankshaft locking tool to be used as OEM 303-1587 Flywheel locking tool to be used as OEM 21-251 / 303-698Timing pump locking pin to be used as OEM 0188H / 1860965000

3-piece Engine Timing Tool Kit for Ford8215-BGS

WZW336.40

Ford

Fits for petrol engines 1.25 L, 1.4 L, 1.6 L, 1.8 L, 2.0 L for e.g. Zetec, Zetec SE, etc.

Includes: - crankshaft timing tool to be used as OEM 303-748, 999-7152, 21-259 9997152, 303-574, 21-163, 303-620, 999-7201, 303-507, 999-715, 21-210 - camshaft alignment plate to be used as OEM 303-376, 303-376B, 999-7151

FORD

13

5-piece Engine Timing Tool Kit for Ford Focus4076-WW

WZW337.70

Ford

For replacing the cam belt on Ford Focus 1.6 TI-VCT engines.Engine codes: HXDA (2003-2007) and 2.0 TDCI with engines codes G6DA, G6DB, G6DC 2003-2007

Includes: camshaft sprocket holding tool to be used as OEM 303-1097 - tensioner pulley locking pin to be used as OEM 303-1054 - flywheel timing pin to be used as OEM 303 1059, 303-1270, 0188X, 999-7121 - crankshaft timing pin to be used as OEM 303-748, 999-7152, 21-259 - camshaft sprocket locking tool to be used as OEM 303-735, 999 7122, 0187B, 0189B, 0132AJ1, 21-263, 0188M, MOT 1430, 303-1277, 0194B

Stretch Belt Fitting Tool Dual Size Pulleys4217-WW

WZW970.80

Ford

For use on duel size pulleys particularly with the Ford Focus.This kit has been designed especially for installing and dismantling stretch belts on double pulleys.Save huge amounts of time by installing in one action.

Ford Engine Timing Tool Set TDCI800010-UTC

WZW971.56

Ford

This kit has been designed for setting and adjusting the timing on Ford models with 2.0 and 2.4 16v TDCi engines. Applications: Mondeo, Transit (‘01-’04) etc.

Engine codes: FMBA / B, D5BA, ABFA, D3FA, F3FA, D2FA, D4FA, F4FA

This kit is especially needed when making chain changes, engine repairs and work on the injection pump.

FORD

14

Engine Timing And Injection Pump Tool Kit For Ford Durotorq4171-WW

WZW969.91

Ford

Updated kit which includes HP pump removal tools commonly found in Ford Transits and Defender vehicles. 2006 > with Denso CR fuel systems2.0 EnginesABFA, D3FA, D5BA, D6BA, F3FA, FIFA, FMBA, HJBA,HJBB, HJBC, HJBE, N7BA, N7BB2.2 Engines (Chain driven H.P. pump)QJBA(BG), QJBB, QJBC, QJBD2.2 Engines (Camshaft driven H.P. pump)4HM, 4HU, 4HV, P8FA, P22DTE, QVFA, QWFA2.4 Engines244DT, D0FA, D2FA, D2FB, D4FA, F4FA, FXFA, H9FA, H9FB, HEFA, HFFA, JXFA, PHFA, ZSD424

Belt Tensioner Wrench, Ford Duratorq Engines4011-WW

WZW967.34

Ford

Designed for use on the Auxiliary belt on Ford Duratorq engine e.g. 2.0, 2.2 TDDI engines commonly found on Mondeo models.

Engine codes: D5BA, D6BA, HJBA/B, HJBC, FMBA/ B, N7BA, QJBB, QJBA

8mm studs (52mm centre to centre) (43mm between the studs)

OEM: 303-676

FORD

Engine Timing Tool Set For Ford2111-WW

WZW966.92

Ford

contains important tools for adjustment of:- flywheel Crankshaft Camshaft / pump shaft Fuel injection pump shaft Belt pulley Tensioning of the timing belt Includes adjusting gauge for camshaft, crankshaft, pumpshaft For e.g.: 1.4 ltr., 1.6 ltr 16V, 1.7 ltr., 1.8 ltr. 16V, 2.0 ltr. 16V (also Zetec) - 1.4 ltr., 1.6 ltr. , 1.8 ltr. and 1.9 ltr. D/TD/TDCi

15

FORD

Engine Timing Tool Set For Ford / Volvo 1.6 Ecoboost1173-WW

WZW963.59

Ford

This kit has been designed for setting and adjusting the timing on 1.6L direct injection petrol engines fitted with variable valve timing. This engine can be found in Ford models and Volvo models with the same set up.Applications Ford B-MAX 1.6 IQJA 2012, C-MAX, 1.6 JQDA 2010, 1.6 JQDB 2010, 1.6 JTDA 2010, 1.6 JTDB 2010, Focus, 1.6 JQDA 2011, 1.6 JQDB 2011, 1.6 JTDA 2011, 1.6 JTDB 2011, Galaxy, 1.6 JTWA 2010, 1.6 JTWB 2010, Grand C-MAX, 1.6 JQDA 2010, 1.6 JQDB 2011, 1.6 JTDA 2010, 1.6 JTDB 2011, Mondeo, 1.6 JTBA 2010, 1.6 JTBB 2010, S-MAX, 1.6 JTWA 2010, 1.6 JTWB 2010Volvo, S60 1.6 B4164T3 2011, 1.6 B4164T 2011, 1.6 B4164T2 2011, S80, 1.6 B4164T 2010, 1.6 B4164T2 2011, V60, 1.6 B4164T3 2011, 1.6 B4164T 2011, 1.6 B4164T2 2011, V70, 1.6 B4164T 2010

Volvo

Engine Timing Tool Set For Volvo T4 and T51229-WW

WZW964.99

Ford

This kit has been designed for setting and adjusting the timing on Volvo models with T4 and T5 engines.Applications:Volvo T4, 1.6L Volvo T5, 1.6L Volvo T4, 2.0L Volvo T5, 2.0L

Engine Timing Tool Set For Ford EcoBoost 2.0L1230-WW

WZW965.81

Ford

For setting and adjusting the timing on chain driven 2.0L petrol engines with direct injection and variable valve timing. Applicatons: Ford: Galaxy, Mondeo, S-Max, Focus Engine codes: TNWA, TNBA, TPWA, MGDA, XQDA OEM Tools: Crankshaft locking tool: 303-748 Camshaft alignment plate, (up to 05.2011): OEM 303-1504 Camshaft alignment plate (after 05.2011): OEM 303-1565 Alignment tool for crankshaft position sensor: OEM 303-1521 2 mm tensioner locking pin

16

Timing Tool Set for Mercedes-Benz1227-WW

WZW975.99

Mercedes Benz

For setting and adjusting the timing on Mercedes Benz M651 engines e.g. Mercedes Benz 1.8/2.1 CDI diesel engines.Applications: A-Class, C Class, CLA, E-Class, GLK, M-Class, S-Class, Sprinter, SLK, Viano and Vito.Engine Applications: 180CDi, 200CDi, 220CDi, 250CDi, 210CDi, 310CDi, 510CDi, 213CDi, 313CDi, 216CDi, 316CDi 416CDi, 2.0CDi, 2.2CDi, 110CDi, 113CDi, 116CDi, 250 and 300 Blue TEC.OEM ToolsCamshaft Locking Tools (2) - 651 589 01 40 00Crankshaft Pulley Holding Tool - 651 589 00 40 00

Mercedes

Look out for our other promos!Out every 3 months.

Contains detailed info about

specially selected tools.

First place to find out about our

newest products.

MONTHLY OFFERS AND NEWS

Out every month containing the newest and best deals on all products from

Welzh Werkzeug and BGS.

Special discounted prices and deals.

Ask your local dealer for info on any of our products.

17

Engine Timing Tool Set for Mercedes M27062628-BGS

WZW354.470

Mercedes-Benz

For setting and checking the engine timing, allows holding down and fixing of the camshaft. Applications: Mercedes A-Class (W176 series) from 2012, models A180 / A200 Mercedes B-Class (W246 series) from 2011, models B180 / B200 - to be used as OEM 270589006100

Engine Timing Tool Set for Mercedes M276, M157, M27862632-BGS

WZW355.140

Mercedes-Benz

For positioning the camshafts in the installed position Applications: CL 500 / 63 AMG (C 216) 2010–2013 - S 500 / 63 AMG (C 217) as of 2014 - CLS 300 (C 218) as of 2012 - E 300 / 350 / 400 (C/A 207) as of 2011 - CLS 350 / 400 / 500 / 63 AMG (C/X 218) 2011–2014 - SLK 350 (R 172) as of 2011- SL 350 / 400 / 500 / 63 AMG (R 231) as of 2012 - S 500 PLUG-IN HYBRID (V 222) as of 2014 - ML 300 / 350 / 500 / 63 AMG (W 166) as of 2011 - C 400 (W 205) as of 2014 - E 400 HYBRID (W 212) as of 2012 - G 63 AMG (W 463) as of 2012 - E 300 / 350 / 400 / 500 / 63 AMG (W/S 212) as of 2011 - C 350 (W/S/C 204) as of 2011 - S 350 / 500 / 63 AMG (W/V 221) as of 2010 - S 400 / 63 AMG (W/V 222) as of 2013 - R 350 BlueEFFICIENCY (W/V 251) as of 2012 - GL 450 / 500 (X 166) as of 2012 - GLK 350 (X 204) as of 2011

Engine Timing Tool for Mercedes M2714078-WW

WZW356.209

Mercedes-Benz

Is required when replacing the timing chain.

Applications: CLK 200K (W209), C 180K, C200K, C 230K (W203), C Sportcoupe C 160K, C 180K, C 200K, C 230K, E 200K (W211), SLK 200K (R171), C 180K (W204), CLC 180K, CLC 200K, C 180 CGI, C 200CGI, C 250CGI (W204), E 200CGI, E 250CGI (W212, C207)

Engine codes: M271: E18ML (02-), DE18ML (03-05), E16ML (08-), DE18LA (09-)

Includes the following tools: - holding device for timing chain, to be used as OEM 271589014000 - camshaft locking tool, to be used as OEM 271589006100 - locating pin, to be used as OEM 271589001500

Mercedes

18

Timing Tool Set for Opel Vectra; Signum; Zafira62506-BGS

WZW324.170

Opel/Vauxhall

Includes following tools for setting engine valve timing on 2.2L 16v timing chains: camshaft locking tool locking pin for chain tensioner counterholder for crankshaft locking tool for water pump

Applications: Astra G (2000 - 2006) Speedster / (Vauxhall) VX220 (2000-2006) Vectra B / C (2000-2008) Signum (2003-2008) Zafira A / B (2000-2008) with engine code Z22SE and Z22YH

Opel / Vauxhall Engine Timing Tool Set800011-UTC

WZW946.167

Vauxhall / Opel

Kit includes tools to lock the camshaft and the crankshaft.Applications:Opel Z 19 DT / Z 19 DTH: Vectra C and Signum ´04Opel Z13 DT: Corsa and Combo ´04Opel with Z 22 SE: Astra G, Vectra C, Zafira, Signumand Speedster Vx220, ´00 - ´04Opel 1.0l - 12V, 1.2l and 1.4l 16V: Corsa, Agila,Astra and Meriva Opel 2.0l and 2.2l Ecotec: Astra, Astra, Caravan, Zafira, Vectra, Omega,Sintra and FronteraEngine codes: OHC, DOHC, Z13, Z22, X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z14XEP, X20DTL, X20DTH, X22DTH Also suitable for Renault and Saab vehicles with the same engine.

Engine Timing Tool Set For Opel / Vauxhall 1174-WW

WZW974.122

Vauxhall/Opel

For setting and adjusting the timing on Opel/Vauhall models:Applications: Adam 1.2 LWD - 1.4 L2Z - 1.4 LDD (2012), Ampera 1.4 LUU / A14XFL (2011), Astra J 1.4 LDD / A14XER - 1.4 LDD / A14XEL / 1.4 LUJ / A14NET - 1.4 LUJ / A14NEL / 1.4 LUJ / A14NET (2009), Corsa D 1.0 A10XEP - 1.2 A12XEL - 1.2 A12XER / 1.4 A14XEL - 1.4 A14XER - 1.2 A12XER / 1.4 A14NEL (2009), Insignia 1.4 LUJ / A14NET (2011), Meriva B 1.4 LDD / A14XER - 1.4 LUJ / A14NET / 1.4 LUH / A14NEL (2010), Mocha 1.4 LUJ / A14NET (2012), Zafira Tourer C 1.4 LUJ / A14NEL / 1.4 LUJ / A14NET (2011), Aveo 1.2 L2Q / A12XEL - 1.2 LDC / A12XER / 1.2 LWD / A12XEL- 1.4 LDD / A14XEL / 1.4 LDD / A14XER (2011)

OEM Tools: OEM EN-49977-100, OEM EN-49977-200, OEM EN-49978, OEM KM 955-1, OEM KM 955-2, OEM KM-952 / 953-A

OPEL

19

Timing Tool Set For Opel / Vauxhall 1.0,1.2, 1.4 4155-WW

WZW943.43

Vauxhall / Opel

This set includes all the tools to time the chain on 1.0, 1.2, 1.4l EcoTec twin cam engines.

Applications: Vauxhall/Opel; Agila (00-08), Corsa-B (97-00), Corsa-C (00-07), Corsa-D (07-09), Combo (97-07), Tigra-B (04-09), Astra-G (98-06), Astra-H (04-09), Meriva (04-09), Suzuki; Wagon R (05-08)

Engine codes: X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z12XEP, Z14XEL, Z14XEP

Engine Setting Locking Tool Kit For Vauxhall/Opel4163-WW

WZW944.58

Vauxhall / Opel

The tool has been designed for setting the timing on Vauxhall, Saab, Fiat 1.9 CDTi, TiD, TTid and 2.0l D CDTi belt drive engines.

Applications: Vauxhall/Opel:Astra-H (04-11), Astra-J (10-12), Insignia (08-12), Signum (04-08), Vectra-C (04-08), Zafira-B (05-12) Saab: 9-3 (04-10), 9-5 (05-10) 

OEM tools: EN-46788/32 025 009, EN-46789, 32 025 008, KM-6349/87 92 335 

Engine codes: Z19DT, Z19DTH, Z19DTJ, Z19DTL, Z19DT, Z19DTH, Z19DTR, A19DTR, Z19DTR, LBQ/A20DTL, LBR/A20DT, LBS/A20DTH, LBX/A20DTJ, LBY/A20DTR, LCD/A20DTC, LBS/A20DTH, LBY/A20DTR    

Saab, Fiat

Engine Timing Tool Set For Opel 1.6, 1.8 16v Z series4164-WW

WZW945.52

Vauxhall / Opel

This kit has been designed for GM engines found in Vauxhall, Alfa, Fiat and Chevrolet 1.4, 1.6, and 1.8, 16v engines.Set includes:Camshaft Locking Bar, OEM KM-6628-ACamshaft Pulley Locking Tool x 2, OEM KM-6340Tensioner Locking Pin, OEM KM-6333Fly Wheel Holding Tool, OEM KM-6625Locking Pin, OEM KM-6349 / KM-6130Flywheel Holding Tool, OEM KM-911Engine Codes:- 1.6 16v - A16LEL, A16LER, A16LET/LLU, A16XER, A16XER/LDE, A16XNT, A16XNT/LGE, Z16XE1, Z16XEP, Z16XER, Z16LEL, Z16LET, Z16LER, Z16XNT, 1.8 16v - A18XEL/2HO,  A18XER, A18XER/2HO, Z18XER, Alfa/Fiat 1.8 16V, 939A4.000, Chevrolet 1.4/1.6/1.8 G14D, LDE, LLU, LXV, & 2HO

Chevrolet, Fiat , Alfa Romeo

OPEL

20

DCI Timing Set1024-WW

WZW940.97

Vauxhall / Opel

This kit has be designed to allows the correct timing to be made to Renault Clio 1.5 (K9K), 1.9 (F9Q) and 2.3/2.5 dCi G9 engines used in Laguna II, Espace, Trafic and Master plus 2.2 dTi, engine codes G9T 720 in Vauxhall Movano 2.2 TDI plus a variety of other vehicles.

Engine CodesG9U, K9K, F9Q, G9T (2002-2009) plus many othersOEM ToolsMOT 1489, 1054, 1430, 1453, 1538, 1536, 1537, 1534

Full application list online.

Renault

Opel/ Vauxhall 26-piece timing tool set1073-WW

WZW941.255

Vauxhall / Opel

To be used for locking the camshaft and crankshaft, removal and assembly of injection and water pumps and changing the timing belt. Applications: 1.3 CDTi 16V , 1.9 CDTi , 2.0 DTi and 2.2 Dti diesel engines.Vauxhall Z19 DT/Z 19 DTH Engine e.g. Vectra C, Signum, 04Vauxhall Z13 DT Engines e.g. Corsa and Combo, 04Vauxhall Z22 SE Engine e.g. Astra G Vectra C. Zafira, Signum, Speedster Vx220, 00- 04VauxhallWith 1.0L-12V, 1.2L and .,4L 16V Petrol Engines (X10XE, Z10XE, Z10XEP, X12XE, Z12XE, Z14XEP) e.g. Corsa, Agila, Astra and MerivaVauxhall 2.0L and 2.2L Ecotec Diesel-Engines (X20DTL, X20DTH, X22DTH) I.E. Astra, Astra, Caravan Zafira Vectra Omega, Sintra and Frontera

Vauxhall Timing Tool Set For 2.0DCi M9R Engines2110-WW

WZW942.86

Vauxhall / Opel

To be used for setting the timing on Nissan and Renault vehicles with M9R engine codes.

Applications: Nissan M9R: 780, 830, 832, 833, Qashqai (07- ), X-trail (07- ), Primastar (08- ), Renault M9R 700, 721, 722, 724, 740, 742, 746, 760, 761, 780, 802, 803, 805, 830, 832, 833, Espace Mk4 (06- ), Grand Scenic Mk2 (05- ) Mk3 (09- Automatic ), Koleos (08- ), Laguna Mk2 (05- ) Mk3 (07-), Megane Mk2 (05- ), Scenic Mk 2 (05- ) Mk3 (09-  Automatic), Traffic Mk2 (06- ) Mk3 (2010- ), Vel Satis (05- ), Vauxhall M9R 780, 782, 784, Vivaro (06- )

Nissan, Renault

OPEL

21

Renault Master Timing Set1025-WW

WZW947.96

Renault

For setting the timing on chain and belt driven engines on Laguna 2.2d/TD, Safrane 2.2Td, Espace 2.2TD, Trafic 2.5D and Master 2.5D/TD.Applications: Clio 1.2/1.4 Megane 2.5D/TD, Clio 1.4/1.6/1.8 16v Megane 1.4/1.6/2.0/ 16v, Clio Sport2.0 16v R19 1.4, Clio Williams 2.0 16v R19 1.4 Eco, Espace 2.0 R19 1.8 16v, Espace 2.0 16v Rapid 1.4, Espace 2.2 TD Safrane 2.0 16v, Express 1.4 Safrane 2.2 TD, Extra 1.4 Safrane 2.5 20vKangoo 1.2/1.4 Scenic 1.4/1.6/2.0 16v, Laguna 1.6 16v Traffic 2.5D, Laguna 1.8/2.0 Twingo 1.2, Laguna 1.8/2.0 16v, Laguna 2.2 D/TD, Laguna 2.5 D/TD

V-Ribbed Belt Mounting Tool Set4009-WW

WZW948.162

Renault

Allows damage free mounting of flexible multi-ribbed belts flexible belt drive.ApplicationsBMW 118, 120, 318, 320, 325, 330, 335, 520, 525, 530, 535, 635, 720, X3, X5Audi A3 1.6/2.0DSeat Altea, lbiza 1.6/2.0DSkoda Octavia, Yeti 1.6/2.0DVolkswagen Eos, Golf, Passat, Polo, Scirocco 2.0DChrysler Grand Voyager, Voyager 2.5D/2.8DFord C-Max, Focus, C-Max, Mondeo, Tourneo, Transit 1.4/1.6/1.8/2.0, Transit, Transit Tourneo 2.2D, Courier, Fiesta, Fusion 1.6Mazda 3, 5, Axela 1.8/2.0 und Modell 2 1.2/1.4/1.6Mercedes Sprinter, Viano, Vito 3.0DPeugeot 206, 207, 307, Boxer 1.6D/2.2D/3.0DCitroen C2, C3, C4, Jumper, Relay 1.6D/2.2D/3.0DFiat Albea, Doblo, Ducato, Fiorino, Fiorino Qubo, Linea, Palio, Siena,Stilo, Strada Pickup 2.2D/2.3D/3.0D, Doblo, Marea, Multipla 1.6 Iveco Daily 2.3D / 3.0DVolvo C30, S40, V50 1.6/1.8/2.0Lancia Lybra 1.6Mitsubishi ASX 1.8D

Renault

Many more kits available. Go online to find more.

22

Renault 1.5/1.9/2.2/2.5 DCI (VANS) Timing Tool Set4156-WW

WZW949.80

Renault

Designed for setting the timing on Renault, Opel, Nissan, Dacia - 1.5, 1.9, 2.2, 2.5 DCIRenault: Avantime, Clio II-III, Clio Sport, Espace, Kangoo, Master, Megane I-II, Modus, Laguna I-II, Scenic I-II, Trafic, TwingoOpel: Movano, VivaroNissan: Almera, Interstar, Kubistar, Micra, Note, Primastar, Primera, QashqaiDacia: LoganEngine code: K9K, F9Q, G9T, G9U

Vauxhall, Nissan

Engine Timing Tool Set Renault 1.4/1.6/2.0 16V4157-WW

WZW950.48

Renault

This kit has been designed for the correct timing on Renault K4J, K4M 1.4,1.6 16V & F4P, F4R 1.8, 2.0 16V engines when changing the timing belt. Applications: Clio 1.4,1.6 16V (98-06), Megane 1.4,1.6 16V (98-06), Clio Sport 2.0 16V (98-06), Megane 1.8,2.0 16V (98-04), Espace 2.0 16V (98-04), Megane II 1.4 16V (02-09), Grand Scenic II 1.4/1.6 16V (02-09), Megane II 1.6 16V (02-05), Laguna 1.6 16V (98-06), Megane II 2.0 16V (02-09), Laguna 1.8 16V (01-05), Scenic 1.4,1.6 16V (98-06), Laguna 1.8, 2.0 16V (98-04), Scenic 1.8, 2.0 16V (98-04), Laguna II 2.0 16V T (02-09)Scenic II 1.4,1.6,2.0 16V (02-09)

Diesel Engine Setting-Locking Tool For Renault 1.5-1.9dci4159-WW

WZW951.15

Renault

Designed to remove the timing belt quickly. Suitable for Renault Laguna, Clio and Kangoo with 1.5 and 1.9 DCI engines.Crankshaft locking pin should be used as OEM: MOT 1489Camshaft / crankshaft timing pin to use as:OEM 0194B, 999-7122, 21-263, MOT 1430, 0187B, 0189BTDC Timing Pin to use as: KM603 OEM, MOT 1054 MOT 861 MOT 863

Nissan

Renault

23

Engine Timing Tool Set BMW/Mini W16D1228-WW

WZW958.44

PSA

This kit has been designed for setting the timing on W16D16UO engines. Applications: BMW MINI, Mini Clubman (07-10) on R55/56/57 models, engine with the codes W16D16 (9HZ) and W16D16UO CITROEN 1.6 diesel in C2, Xsara, Picasso, C4, C5, C4 Picasso, Grand Picasso and Berlingo Peugeot 1.6 diesel engine in 1007, 206, 207,307, 308 and Partner

Engine Timing Tool Set Citroen / Peugeot1071-WW

WZW959.80

PSA

This kit has been designed for the setting and adjusting of the timing in PSA engine.

Applications: PSA models with HPI(petrol) or HDI (diesel) engine & (Twin Cam 16v Petrol Engine).

Engine codes: ew7j4, ew10j4, ew10j4s, ew10d-hpi, Ew12j4

Citroen & Peugeot Master Timing Set1023-WW

WZW939.113.96

PSA

suitable for Citroen and Peugeot 16 valve engines i.e. 1.8l-16V and 2.0l 16V with engine code EW (incl. HPI engines) for example: C5, 206, 306 and 406Suitable for Citroen und Peugeot 1.9D, 2.0D, 2.2DEngine code: DW8, DW10, DW12 HDI used by Citroen, Fiat, Peugeot and ToyotaPetrol engines (XU+TU)

Toyota, Fiat

PSA

24

Petrol Engine Timing Kit For Citroen, Peugeot4158-WW

WZW960.67

PSA

Designed for setting and adjusting the timing on BMW and PSA models OEM tools included: 11.3.340, 11.4.360, 11.5.140, 11.9.280, 11.9.330

Applications:BMW 1 Series: 116i E81/82/87/88 (04-09), 118i E81/82/87/88 (04-14), 120i E81/82/87/88 (04-14), 125i E82 (07-12), 130i E81/87 (05-12), 135iS E82 (07-12)BMW 3 Series: 316i/ti Compact E46 (01-07), 316i E90/91/92/93 (05-14), 318i/ti Compact E46 (01-07), 318i E90/91/92/93 (05-12), 320i E90/91/92/93 (05-12), 323i E90/91/92/93 (04-11), 325i E90/91/92/93 (04-12), 330i E90/91/92/93 (04-14), 335i E90/91/92/93 (04-14)BMW 5 Series: 520i E60/61 (07-10), 523i E60/61 (04-10), 525i E60/61 (04-10), 530i E60/61 (05-10)BMW 6 Series: 630i E63/64 (04-11)BMW 7 Series: 730i E65/66 (04-12)BMW X Series: X1 sDrive 18i E84 (10-12), X1 xDrive 18i E84 (10-12), X3 2.0 E83 (05-10), X3 2.5/3.0 E83 (06-10), X5 3.0 E70 (06-10)BMW Z Series: Z4 2.0 E85/86 (04-09), Z4 2.5/3.0 E85/86 (05-09)BMW Mini: Clubman (R55) (08-14), Cooper S R55/56 (06-10), Cooper R55/56 (06-10), Mini One R56 (07-10) Mini (R56/57) (08-15)Citroen: Berlingo (09-16), C3 Picasso (09-15), C3 III (10-15), C4 Picasso/Grand Picasso (08-13), (08-11), C4 (08-11), C4 II (11-15), C5 III (09-14), DS3 (04-15), DS4 (11-15), DS5 (12-15)Peugeot: 207 (06-13), 207CC (07-15), 208 (13-15), 2008 (13-15), 308 (07-15), 308CC (09-15), 3008 (09-15), 508 (11-15), 5008 (09-15), Partner III (09-16), RCZ (10-16)

BMW, MINI

Engine Codes:BMW: N40; B16A, N42; B18A, B20A, N45T; B16AC, N46; B18, B20, B20B, N46T; B20, B20B, B20BD, B20BZ, B20O2, N52; B25A, B25AE, B30, B30A, B30A/O0, B30AF, B30F, B30U1, N52K; B25A, B25AE, B25AF, B25AF/O1, B25BE, B25U1, B30A, B30AE, B30AF, N53; B25A, B30A, N54; B30A, B30A/AA, B30T0BMW Mini: N12; B14, B14AB, B16A, N14; B16A, B16CD, B16CD/T0

PSA: EP3 (8FP), EP3 (8FS), EP3C (8FN), EP3C (8FP), EP3C (8FR), EP6 (5FP), EP6 (5FW), EP6C (5FH), EP6C (5FK), EP6C (5FS), EP6C (5FW), EP6CDT (5FE), EP6CDT (5FM), EP6CDT (5FN), EP6CDT (5FV), EP6CDTE (5FR), EP6CDTM (5FE), EP6CDTM (5FM), EP6CDTX (5FU), EP6DT (5FT), EP6DT (5FX), EP6DTE (5FR), EP6DTE (5FX), EP6DTS (5FD), EP6DTS (5FF), EP6DTS (5FY)

Engine Timing Tool Set For MINI / PSA Engines 1109-WW

WZW957.110

PSA

This kit is needed for replacing the cylinder head sealing and setting the timing. Applications: MINI One, HB Cooper, Cooper, series R55-56 with engine code N12. Citroen C4 (08-09), C4 Picasso (08-09)Peugeot 207 (06-09), 207CC (07-09), 308 (01-09)with engine: 1,4 VTi (Valvetronic), EP3 (8FS) (Valvetronic), EP6 (5FW), 1.6THP (Direct Injection), EP6DT (5FX), EP6DTS(5FY)OEM Tools: Crankshaft locking tool use as OEM 119590Camshaft locking tool use as OEM 119540

PSA

25

Engine Timing Tool Set for Porsche Panamera/Cayenne V88835-BGS

WZW331.510

Porsche

For adjusting the camshaft timing - is required when renewing cylinder head sealings, changing camshaft, etc. - includes following tools - camshaft gauges suitable for Panamera / Cayenne after 2008, to be used as OEM 9678/1 - camshaft gauges, suitable for Cayenne, to be used as OEM 9678 - auxiliary chain tensioner suitable for Cayenne after 2008, to be used as OEM 9683/1 - 27 mm socket, 3/8” drive, 30 mm length, suitable for Cayenne, to be used as OEM 9714- crankshaft aligning tool, to be used as OEM 9595/1

Engine Timing Tool Set for Porsche 9118837-BGS

WZW332.160

Porsche

For adjusting the camshaft timing - is required when renewing cylinder head sealing, changing camshaft, etc.- includes: - 1x camshaft holding tool, suitable for engine M96/03, to be used as OEM 9685- 1x camshaft locking tool, suitable for engines M97/01 & M96/03, to be used as OEM 9686 - 2x locking pin, suitable for engines M97/01 & M96/03, to be used as OEM 9595 / 9595/1

Timing Tool Set for Porsche Boxster & 9118836-BGS

WZW333.610

Porsche

For adjusting the engine timing - suitable for following Porsche models: - Boxster 2500 ccm, as of 1998 - Boxster 2700 ccm, as of 2000 - Boxster 3200 ccm, as of 2000 - 911 Carrera 4S - 3600 ccm, as - engine codes 996 / 997 / 986 / 987 - includes important tools, e.g.: crankshaft alignment tool to be used as: OEM 9595, 9612, 9611, 9634, 9608, 9602

Porsche

26

Engine Timing Tool Set For VAG 2.4 & 3.2 FSI1170-WW

WZW972.78

VAG

For checking and adjusting the engine timingSuitable for Audi V6, V8 and V10 engines with chainIncluded: - camshaft locking tool to be used as OEM T40070 - crankshaft locking pin to be used as OEM T40069 - chain tensioner locking pin to be used as OEM T40071

Engine Timing Tool Set For VAG 2.7 & 3.0 TDi5002-WW

WZW973.93

VAG

For locking the camshaft, crankshaft and fixing the chain tensioner.Applications:VW Touareg, Phaeton

Engine codes: ASB, BKN, BKS, BMK, BMZ, BNG, BPP, BSG, BUG, BUN, CAMA, CAMB, CANA, CANB, CANC, CAND, CAPA, CARA, CARB, CASA, CASB, CASC, CATA, CCMA, CCWA, CCWB, CDYA, CDYB, CDYC, CEXA, CGKA, CGKB

OEM Tools: OEM T40062, OEM T40061, OEM T40049, OEM 3359, OEM T40058, OEM T40060, OEM 3242

Camshaft Fitting Tool For VAG 6 & 8 Cylinder8871-BGS

WZW325.160

VAG

For fitting the camshaft in the cylinder head - suitable for following VAG models: VW Tiguan 2008 / Passat CC 2009 Touareg 2003 / Phaeton 2003 Audi A3 2004 / A4 2001 / A4 2008 / A5 2008 Q5 2008 / A6 2005 / Q7 2007 / A8 2003 6 cylinder TDI Common Rail 2.7 & 3.0 4-valve engines 8 cylinder TDI Common Rail 4.0 4-valve engines- to be used as VAG OEM T40095

vag

27

Fly Wheel Locking Tool For Vag 1.9 TDI8751-BGS

WZW326.40

VAG

For locking the flywheel- to be inserted into the bore of transmission housing- fits on VW, Skoda, Seat with 1.9l diesel engines

Camshafts Sockets; VAG 1.8 / 2.8 TFSI8565-BGS

WZW327.60

VAG

Used for removal and installation of 4/3-way central valve on the camshaft adjustment- suitable for VW Passat, Audi A3, A4, A5, Q5 1.8l and 2.0 liter engines with chain drive- to be used as OEM T10352 / T10352/1

Engine Timing Tool Set for VAG 2.0 TFSI8951-BGS

WZW328.170

VAG

For checking and setting the engine timing on VAG 2.0L TFSI engines with code CAEB as of 2009- includes following tools:- crankshaft counterholding tool, to be used as OEM T10355- crankshaft thrust piece, to be used as OEM T10368- camshaft locking bolt (4x), to be used as OEM T40196- chain tensioner locking clip (2x), to be used as OEM T40267- chain sprocket locking tool (2x), to be used as OEM T40271- camshaft control valve tool, to be used as OEM T10352

vag

28

Engine Timing Tool Kit for VAG 1.0 / 1.2 / 1.4 L8922-BGS

WZW329.220

VAG

For checking and setting the engine timing- suitable for following VAG engines:1.2 / 1.4 L 4-cylinder direct injection with turbocharger, built in Audi A3 / VW Golf from 2013- 1.0 L 3-cylinder, engine code: CHYA, CHYB, CPGA, built in Seat Mii / Skoda Citigo / VW Up!-

Includes: crankshaft locking bolt, to be used as OEM T10340- camshaft setting plate, to be used as OEM T10477- camshaft sprocket locking tool, to be used as OEM T10476- tensioner adjusting wrench, to be used as OEM T10499- camshaft setting plate, to be used as OEM T10494- assembly tool, to be used as OEM T10487

Engine Timing Tool Set for AUDI V6 30V8299-BGS

WZW330.190

VAG

Suitable for Audi A4, A6, A8

Engine Codes: ASN, AVK, BBJ

For timing belt replacement and repair work on the engine- easy mounting of the belt as camshaft and crankshaft are fixed- contains: - 2 camshaft fixer tool, to be used as OEM T40030 - crankshaft fixer tool, to be used as OEM T40026 - tension roller key, to be used as OEM 3387 - socket for basic adjustment of the camshaft adjuster to be used as OEM T40028 - pins for clamping element, to be used as OEM T40011

Engine Timing Tool Set For Vag 1.4 / 1.6 FSI800031-UTC

WZW937.55

VAG

Suitable for VAG FSI and TFSI 1.4L and 1.6L enginesIncluded - camshaft locking tool, to be used as OEM T10171 - setting gauge holder, to be used as OEM T10170 - crankshaft locking tool, to be used as OEM T10340 - tensioner locking tool, to be used as OEM T40011Applications - Audi A3 (03-10), - Seat Ibiza , Leon, Altea - Skoda Octavia (04-09), Fabia (07-09), Superb (09-10), Roomster (06-09)

vag

29

Engine Timing Tool Set For VAG 2.5, 4.9, TDI PD800035-UTC

WZW938.232

VAG

Suitable for VW T5 as of 2004, Touareg and Phaeton as of 2003 with 5 and 10 cylinder engines with engine code: AXD, AXE, BAC, BLJ, BLK, BNZ, BPC, BPD, BPECamshaft locking tool for review and adjustment, suitable for 5 and 10 cylinder engines, to be used as OEM T10193Camshaft locking tool for review and adjustment of 10 cylinder engines, to be used as OEM T10194Clamping device for removal and replacement of the camshaft wheels of 5 and 10 cylinder engines, to be used as OEM T10199Special socket for rotating the crankshaft of 5 cylinder engines, to be used as OEM T10225Crankshaft locking wrench for 5 cylinder engines, to be used as OEM T10226Tensioner wrench

VAG Engine Timing Tool Set For 1.2 TFSI4179-WW

WZW935.32

VAG

For use on the following VAG Group models from 2009. Audi: A1, A3, A3 Sportback, A3 Cabriolet Seat: Altea, Altea XL, Ibiza V, Ibiza Sportcoupe, Leon, Toledo IV Skoda: Fabia II, Fabia Combi, Rapid, Oktavia II, Oktavia Combi, Rommster, Yeti Volkswagen: Beetle, Caddy III, Golf VI, Golf Plus, Golf Cabriolet, Golf Variant, Jetta IV, Polo, Touran

Engine Codes: CBZA ,CBZB, CBZC

vag

VAG Master Timing Tool Set Petrol and Diesel Engines1019-WW

WZW929.139

VAG

Petrol Engines:Audi: 80, A2, A3, S3, A4, A6, TTSeat: Alhambra, Arosa, Cordoba, Ibiza, Inca, Leon, ToledoSkoda: Fabia, Octavia (from 96)VW: Bora, Caddy, Fox, Golf, Lupo, New Beetle, Passat, Polo, Sharan, TouranDiesel EnginesAudi: 80, A2, A3, A4, A6, Cabriolet (95-00)Platz: Alhambra, Arosa, Altea, Cordoba, Ibiza, Inca, Leon, ToledoSkoda: Fabia, Felicia, Octavia (93-05)VW: Bora, Caddy, Golf, Lupo, New Beetle, Passat, Polo, Sharan, Transporter, TouranEngine CodesAFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC

30

Engine Timing Tool Set For 1.8/2.1 4V TFSi Engines4202-WW

WZW936.118

VAG

For use on VAG Group vehicles with 1.8/2.1l 4v TFSi Engines

Engine codes: Audi (from ‘07) - BPU, BYT, BZB, CAWB, CBFA, CCTA, CCZA, CDAA, CJSA, CJSB, CABA, CABB, CDHA, CDHB, CDNB, CDNC, CFKA, CJEB, CNCD, CABD, CCZC, CPSA, CJXB, CJXC, CESA, CETA, SEAT (from ‘06)CCZA, BYT, BZB, CCZB, CDAA, CDHA, CDHB, CDND, CTHE, CTHF, CTJB, CTJC, CJSA, CCZB, Skoda (from ‘07) - BZB, CDAA, CDAB, CJSA, CJSB, CCZA, CDAA, CDAB, VW (from ‘07) BZB, CDAA, CDAB, CJSA, CJSB, CCZA, CDAA, CDABBZB, CDAA, CDAB, CJSA, CJSB, CCZA, CDAA, CDAB, CDAA, CDAB, CJSA, CJSB, CCZA, CDAA, CDAB

OEM Tools: T10352, T40267, T40011, T40271 - 1, T40271, VAS6079, T40265, T10170

VW/ AUDI FSI 2.0 Timing Tool Set1075-WW

WZW931.87

VAG

Fits for 2.0 L FSI and TFSI engines, e.g. Golf, Touran, Audi A3, engines codes AWA, BMB, AXW

Engine Timing Tool for VW and Audi, 1.2/1.4/1.6 FSI and 1.4 TSI800053-UTC

WZW932.90

VAG

To be used on cars with engine codes: CBZA, CBZB, CBZCApplications: Audi A1, A3, A3 Sportback, A3 CabrioletCan be used on various Audi, SEAT, Skoda and VW models. Also for 1.6 FSI engines with engine codes: AXU, BAG, BKG, BLF. BLN, BLP

vag

Timing Tool Set VAG 1.8 / 2.0L FSI / TFSI4025-WW

WZW934.181

VAG

For checking and setting the engine timingSuitable for 1.8 / 2.0L VAG engines with engine codes: CDHB - CDNC - CFKA - CDNBAudi A4 / A5 (as of 2008) / A6 (as of 2012)

31

VAG Engine Timing Tool Set For 1.6 & 2.0 Common Rail Diesel1076-WW

WZW933.83

VAG

To be used on VAG Group models with 1.6, 2.0 Tdi CR engines. ApplicationsAudi A3, A4, A5, A6, Q5 Volkswagen Golf, Tiguan, Passat, Eos Seat ExeoEngine Codes: CAAA, CAAB, CAAC, CAGA, CAGB, CAGC, CAHA, CAHB, CAVA, CAYB, CAYC, CBAA, CBAB, CBAC, CBBB, CBDA, CBDC, CBDD, CCHA, CFFB, FCA

OEM ToolsT20102, T10050, T10100, T10264, T40098, T10265, T10051, T10052, T10255

VAG 1.9 & 2.0 TDI Timing Kit1019-1-WW

WZW928.21

VAG

Included2x injection pump locking ring, Crankshaft Setting Tool - Bored engines, Crankshaft Setting Tool - Non Bored engines, Tensioner Pulley Locking Pin, Auxiliary drive belt tensioner locking pinApplicationsVW: Lupo, Fox, Polo, Golf, Golf Plus, Bora, Jetta, Beetle, Scirocco,Passat, Sharan, Touran, Tiguan, Caddy, Transporter (98-11) Audi: A2, A3, A4, A5, A6, Q5 (98-11)Ford: Galaxy (00-06)Seat: Ibiza, Altea, Leon, Alhambra, Toledo, Arosa, Cordoba (99-11)Skoda: Fabia, Roomster, Octavia, Superb  (00-11) Mitsubishi - Grandis, Outlander  2.0 Di-D (05-11) 

Engine Codes: (1.2 Tdi) ANY, AYZ, (1.4 Tdi) AMF, ATL, BAY, BHC, BNM, BNV, (1.9 Tdi) – AJM, AMG, ANJ, ARL, ARX, ASZ, ATD, ATJ, AUY,AVB, AVF, AVQ, AWX, AXB, AXC, AXR, BEW, BJB, BKC, BKE, BLS, BLT, BMT, BPX, BRB, BRM, BRU, BSU, BSV, BSW, BTB, BVK, BXE, BXF, (2.0 TDi) AZV, BKD, BDJ, BDK, BGW, BHW, BKP, BLB, BMA, BMM, BMN, BMP, BMR, BNA, BPW, BRC, BRE, BRF, BRT, BSS, BUY, BUZ, BVE,BVF, BVG, BVH, BVWCommon Rail Engines(1.6 TDi) CAYA, CAYB, CAYC(2.0 TDi) CAGA, CAGB, CAGC, CAHA, CAHB, CBAA, CBAB, CBAC, CBBA, CBDA, CBDB, CBDC, CBEA, CEGA

vag

Engine Timing Tool Set for VW Polo, Lupo4074-WW

WZW932.65

VAG

For VAG 1.2 L 3-cylinder enginesIncludes - camshaft locking tool, to be used as OEM T10123 - camshaft locking tool, to be used as OEM T10120 - crankshaft locking tool, to be used as OEM T10121Engine codes: Fabia 1,2l 12V AWY, AZY, BMD, BME Polo 9N 1,2l 12V AWY, AZY, BMD, BME A3 1,2l 12V AWY, AZY, BMD, BME

Welzh Werkzeug 1 -6 The Green Eastriggs Scotland DG12 6NH

(Tel) +44 (0)1461 700120 (Fax) +44 (0)1461 700181 www.welzhwerkzeug.com info@welzhwerkzeug.com

AUTHORIESED DISTRIBUTOR:

PLEASE NOTE: All prices exclude VAT

The audio, video, text, images or other material available on this website “the Site” by the Welzh Werkzeug Ltd to you (collectively, the “Content”) is either: protected by third-party rights such as copyright or trademarks (for which Welzh Werkzeug Ltd is permitted to make available to you), is copyright to Welzh Werkzeug Ltd, or are materials which are in the public domain or made available under a Creative Commons licence.

© Copyright 2016 by Welzh Werkzeug Ltd

Engine Timing Tool kit - Ford EcoBoost 1.0 Belt Drive 3 Cylinder4015-WW

WZW968.265

Ford

Designed for setting and adjusting the timing on Ford models fitted with 1.0L 3 cylinder ecoboost engines.

Applications:Focus (‘12-), Fiesta (‘13-), B-Max (‘12-), C-Max (‘12-), Transit Connect (‘13-), Ecosport (‘13-), Grand C-Max (‘12-), Tourneo Connect (‘14-), Mondeo (‘14-), Transit Courier (‘14-)

Engine Codes:M1DA, M1JA, M1JE, M2DA, M2GA, P4JA, P4JB, SFJA, SFJB, XMJA, XMJB

NEW ITEM!!

OEM 303-1605/1 | Camshaft locking tool303-1605/2 | Camshaft locking tool303-1606 | Variable camshaft timing locking tool303-1604 | Camshaft timing pin303-1602 | Flywheel locking tool303-732 | Camshaft alignment tool303-1054 | Tensioner pulley locking pin

Must have Kit for

2016+