timing measures the swimmer’s performance, by accurately determining the time it takes each...

11

Upload: edmund-underwood

Post on 29-Dec-2015

214 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement
Page 2: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

Timing measures the swimmer’s performance, by accurately determining the time it takes each

swimmer to cover the distance of the event.

Final placement of the swimmer in each event isdetermined by their times and their finishing order.

Therefore, precision and accuracyare important for Timekeepers.

TimekeeperTimekeeper

Page 3: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

*Have 2 pens, arrive 30 minutes before start of gala,sign in to referee, then report to Chief Timekeeper!

Reporting for Gala DutyReporting for Gala Duty

Page 4: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

• These will be allocated by the Chief Timekeeper

Allocation of Dutiesand Equipment

Allocation of Dutiesand Equipment

• The role of the Chief Timekeeper is vital in events where Automatic Officiating Equipment is not used

Page 5: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

Procedures for Reporting a TimeProcedures for Reporting a Time• Sit at end of lane

• Check name of swimmer on start sheet (or time card)

• Stand when referee blows the long whistle blast

• Start watch on starting signal

• Sit down once you have confirmed your watch is running and whilst race is taking place

• Stay standing if there is a problem (watch doesn’t start)

• When swimmer is 15m from the finish of the race stand ready to take time

• Take time then sit down and record your time on programme, using 6 digits

• Determine the official time if using manual times

• Clear watch when referee signals start of next race

• When AOE is used do not take average of times

Page 6: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

3 Timekeepers:

• Three watches the same = official time

• Two watches the same = official time

• All watches different = middle time

2 Timekeepers:• Two watches the same = official time• Both watches different = average time

(if between times then round up to nearest 1/100th of a second)

1 Timekeeper:

• When there is only one Timekeeper, that one will be the official time

Determining an Official TimeDetermining an Official Time

Page 7: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

Other duties (1)Other duties (1)• Splits:

– Record times at intermediate distances of a race using the split (lap) button on your watch, pressing it when either the swimmer touches the wall.

– Split times may be required, if instructed by the Chief Timekeeper, at intermediate distances in races longer than 100 metres.

– Record the time, if requested, on the swimmer’s card before pressing the splits button again

• Back-up button: – This is a cable with a button on the end which is pressed by the

timekeeper, at the same time as the stopwatch, at the end of a race– It is used as a back-up to the AOE system of electronic timing in

case of technical failure or if the swimmer’s hands fail to make sufficient contact with the pads.

Page 8: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

Other Duties (2)Other Duties (2)• Lap cards, bells, whistles

– In longer races lap cards can be displayed to help swimmers keep count of the number of laps remaining. If these are displayed at the starting end of the pool, turning these may be the timekeeper’s responsibility

– Bells or whistles may be issued to timekeepers to use at the starting end of the pool. These will need to be sounded in 1500m and 800m races to inform the swimmers that they have two lengths and five metres left to swim

– The five metre point will be indicated either by flags or red lane dividers

– The bell or whistle should be sounded when the swimmer reaches the five metre point and continued throughout the turn until they have passed the five metre point again

Page 9: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

Chief TimekeeperChief Timekeeper• Before the race:

– Allocates Timekeepers to lanes (1-3 per lane)

– Issues stopwatches if necessary – Timekeepers must familiarise themselves with any new watch

• During the race:– The Chief Timekeeper must be informed if your watch failed

at the start or finish of the race

• After the race (the 5 C’s):– Collects timecards (if used) from each lane– Checks manually recorded times on cards and puts them in order,

fastest to slowest– Consults with finish judge to ensure time results agree with his decision– Instructs the Timekeepers to clear their watches– Collects start sheets, if used, and passes them

to the recorders

Page 10: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

Don’t cheer or coach swimmers during a race

Refer any questions to the Chief Timekeeper

Know the distance of the event

Record the watch accurately

Do not divulge the time to the swimmer

Check the lane/heat/event

Only give information tothe Chief Timekeeper

or the referee

Avoid the top of the timing pad if the AOE is in operation

Check the swimmer’s name on the timecard or start sheet

Check relay team lines and swimmers are in the given order

Tips for TimekeepersTips for Timekeepers

Page 11: Timing measures the swimmer’s performance, by accurately determining the time it takes each swimmer to cover the distance of the event. Final placement

Under International Paralympic Committee Rules (SM 2.9.2) –

Each Timekeeper shall start his watch at the starting signal,

and shall stop it when the swimmer in their lane has completed the race. 

Timekeepers maybe instructed by the Chief Timekeeper to record times at intermediate distances in races

longer than 100 metres.

Is Timekeeping differentat a Disability Event?

Is Timekeeping differentat a Disability Event?