Tingley offers the broadest selection of injection molded over-the-shoe footwearin the industry. Our line offers a variety of materials and styles to meet a wide range of protectionand application requirements. We offer injection molded overshoes in Natural Rubber, Neoprene, andPVC (Polyvinyl Chloride). We complement this offering with a line of conventional rubber overshoes.

Our overshoe products allow users to wear their normal work shoes, while having protection againstthe environment. Overshoes are the perfect choice when the protective requirements are intermittentor weather driven.

Material Selection: Before choosing a material where contact with a given chemical may occur,the users should perform their own tests. If highly toxic chemicals are present, special care must betaken into consideration when choosing the correct protective product. This care should include dailyinspections to ensure that normal wear and tear have not reduced the integrity of the product.Depending on the toxicity level of the chemical, products should be disposed of if intimate contactwith the chemical has occurred.

Natural Rubber: Has out-standing stretch for easier on and off, and excellent low temperature properties allow thematerial to stay supple in coldtemperatures. It has superior slip,puncture, and cut resistance ascompared to PVC. Rubber resistsbases, acids, alcohols, and dilutedwater solutions of most chemi-cals that are water-soluble. It is ahydrocarbon and does notwithstand constant contact withpetroleum and oil based solvents.Page 3

Neoprene: Is a synthetic rubberthat is resistant to a broad rangeof animal fats and blood, oils,certain acids, alcohols, alkalies,caustics, and certain solvents. It isless resistant to cuts, puncturesand abrasion than rubber. OurNeoprene material comes in abrick red color so it can be easilyrecognized in its application asNeoprene. Page 4

PVC (Polyvinyl Chloride): Is asynthetic thermoplastic polymerthat provides good protectionagainst animal fats, many acids,alcohols, alkalies, bases, oils, andpetroleum hydrocarbons. PVC isnot recommended for use inketones, aldehydes, and many solvents. Our Frigiflex formula,used in our Workbrutes overshoeline, has good stretch and lowtemperature properties to staysupple in cold weather. Pages 5, 6

Protective Footwear

Over-the-Shoe Guide 1-2

Rubber Overshoes 3

Neoprene Overshoes 4

PVC Overshoes 5

Steel Toe PVC Overshoe 6

Conventional Rubber 7

Over-the-Sock Guide 8-9

Premier Knee Boots 10

Better Grade Knee Boots 11

General PurposeKnee Boots 12

NeopreneSnugleg Boots 13

HazProof Boot 14

Protective Clothing

ProtectiveClothing Guide 15-16

Polyurethane on Nylon 17

Neoprene on Nylon 18

PVC on Non-Woven 19

PVC Green Acid 20

PVC/Polyester Scrim 21

Utility Rainwear 22

Economy Rainwear 23-24

High Visibility Rainwear 25

Chemical Degradation 26

1

Index O v e r t h e S h o e

32

MATERIAL SELECTION GUIDE

1. Seamless construction for 100% waterproof protection.

2. More material in heel, toe, and sole for longer wear.

3. Less material in the upper results in lighter weight forimproved flexibility and less leg fatigue.

4. Sturdy molded button on boot styles for secure closure.No hardware to corrode, conduct, tear, or snag.

5. Full opening gusset on boot styles for easy on and off.

6.Heavy duty heel kick for easy off.

7. No lining. Completely washable. Wipes dry quickly.

8. Deep cleated outsole spits out debris for good slipresistance and longer wear.

7

3

4

5

2

86

1

Neoprene PVC Natural Rubber

AntifreezeGasolineMotor oil

Cutting OilFuel OilGrease • Hydraulic Oil • Kerosene

Neoprene PVC Natural RubberPVC Neoprene Natural Rubber

Neoprene PVC Natural Rubber

Hydrocarbons (Oils and Solvents)KetonesAldehydesAlcoholsOrganic AcidsInorganic AcidsSalts, AlkaliesOrganic Esters

Neoprene PVC Natural RubberNeoprene Natural Rubber PVCNeoprene PVC Natural Rubber

Natural Rubber Neoprene PVCNeoprene PVC Natural Rubber

PVC Neoprene Natural RubberNeoprene PVC Natural Rubber

Natural Rubber Neoprene PVC

Neoprene PVC Natural RubberNeoprene Natural Rubber PVCNeoprene PVC Natural Rubber

Animal Fats • Blood • Butter FatCorn Oil • Soybean Oil • Fish OilSodium HypochloriteCaustic Potash

FoodProcessing

Automotive

GeneralManufacturing

ChemicalFamilyRankings

INJECTION MOLDED OVERSHOE FEATURES

Best Suited............................Least Suited

2

F o o t w e a r G u i d e . . .

Our Natural Rubber Work Overshoes Stretch Easily Over The Bulkiest Of Workshoes

With its reinforced heel and toe, our work overshoes aredesigned to stand up to tough daily wear. That’s why they areconsidered the industry standard.

Injection molded, seamless construction for 100% waterproof protection.

Excellent tensile strength, ease of stretch and tearresistance for more durability, better comfort, andeasier on and off.

Will not crack or stiffen in the coldest of weather.

Deep cleated outsole spits out debris for good slipresistance and longer wear.

Heavy duty heel kick-off cleat for easy no handsremoval.

Sturdy molded in rubber button on boot styles, forsecure closure. No hardware to conduct, tear, or snag.

No lining for easy cleaning and decontamination.

More material in heel, toe, and sole for longer wear.

Less material in the upper results in lighter weight and reduced leg fatigue.

F i t F o r W o r k

Our natural rubber work overshoes allow you to work comfortablyin the toughest conditions.

Ideal Applications: Food Processing, Transportation, Utilities, Construction, GeneralIndustry, Municipalities, and Agriculture.

Chemical Resistance: Acids, alcohols, bases, and diluted water solutions of most chemicals that are water soluble. Not recommended for constant contact with petroleum and oil based products.

SIZINGOvershoe Size Men’sSmall 61⁄2 - 8Medium 8 - 91⁄2Large 91⁄2 - 11X Large 11 - 121⁄22X Large 121⁄2 - 143X Large 14 - 151⁄2

33

HI-TOP WORK RUBBER – COVERS WORK SHOE UP TO THE ANKLE

1300 Black – Cleated Outsole S – 3XL10" WORK BOOT – MOLDED IN BUTTON FOR SECURE CLOSURE

1400 Black – Cleated Outsole S – 3XL17" KNEE BOOT – MOLDED IN BUTTON FOR SECURE CLOSURE

1500 Black – Cross Hatch Outsole S – 3XL

RUBBER OVERSHOES

Cleated Outsole: Spits out debris for good slip resistance.

Cross Hatch Outsole:Tread design covers moresurface area for good slip resistance.

Our Neoprene Overshoes Are More Resistant ThanRubber To A Wide Range Of Chemicals, Solvents,Caustics, Hydrocarbons, Fats, Acids, And Oils

Known for its outstanding physical toughness, Neoprene performs even better with Tingley's unique formulation foradded chemical resistance.

Injection molded, seamless construction for 100% waterproof protection.

Sturdy but stretchable compound combines durabilitywith easy on and off.

Available in brick red color for quick identification fromother overshoes that do not offer the same level ofchemical protection.

Deep cleated outsole spits out debris for good slip resistance and longer wear.

Heavy duty heel kick-off cleat for easy no handsremoval.

Sturdy molded in Neoprene button for secure closure.No hardware to conduct, tear, or snag.

No lining for easy cleaning and decontamination.

More material in the heel, toe, and sole for longer wear.

Less material in the upper results in lighter weight andreduced leg fatigue.

Chemical Resistant Overshoes

In rough working conditions, you need Tingley's Neoprene overshoes for protection.

Ideal Applications: Food Processing,Vegetable 0il Refining, Chemical Production,and Hazardous Waste Cleanup.

Chemical Resistance: Animal fat andblood, certain acids, alcohols, alkalies, oils, and certain solvents.

SIZING

Overshoe Size Men’sSmall 61⁄2 - 8Medium 8 - 91⁄2Large 91⁄2 - 11X Large 11 - 121⁄22X Large 121⁄2 - 143X Large 14 - 151⁄2

4

Cleated Outsole:Spits out debris for good slip resistance

10" WORK BOOT – MOLDED IN BUTTON FOR SECURE CLOSURE

1440 Brick Red – Cleated Outsole S – 3XL

NEOPRENE OVERSHOES

5

Workbrutes® PVC Overshoes Have Thicker AndDeeper Cleats For Better Grip And Longer Wear

Our injection molded Workbrutes PVC overshoe has 46 percentmore material in its outsole than the nearest slush moldedcompetitor. Our Frigiflex® PVC compound contains special additives for high stretch and flexibility in cold temperatures.

Injection molded, seamless construction for 100%waterproof protection.

Injection molding puts less material in the upper eliminating unnecessary weight, for reduced leg fatigue.

For longer life more material is added to the sole at thegreatest wear points: the heel, toe, and cleats.

Thicker tread has deeper cleats with sharper edges formore traction.

Key interior entry points are specially textured to allowovershoes to easily slip on and off over rubber soleshoes.

Boots feature no-pinch molded in button and two button holes for better fit and protection.

Heavy duty heel kick-off for easy off.

More Material, More Traction, Longer Wear

The name Workbrutes means more traction, more comfort, andmore protection.

Ideal Applications: FoodProcessing, Construction, GeneralIndustry, Transportation, andHazardous Waste Cleanup.

Chemical Resistance:Some exposure to fats, certain acids, hydrocarbons, and caustics. Not recommended for use in ketones, aldehydes, and many solvents.

Cleated Outsole:Spits out debris and providesexcellent traction.

SIZING

Overshoe Size Men’sX Small 5 - 61⁄2Small 61⁄2 - 8Medium 8 - 91⁄2Large 91⁄2 - 11X Large 11 - 132X Large 13 - 15

HI-TOP WORK STYLE – COVERS WORK SHOE UP TO ANKLE

35111 Black – Cleated Outsole XS – 2XL35113 Yellow – Cleated Outsole XS – 2XL

10" WORK BOOT – MOLDED IN BUTTON FOR SECURE CLOSURE

35121 Black – Cleated Outsole XS – 2XL35123 Yellow – Cleated Outsole S – 2XL

14" KNEE BOOT – MOLDED IN BUTTON FOR SECURE CLOSURE

35141 Black – Cleated Outsole S – 2XL

PVC OVERSHOES

Workbrutes® and Frigiflex® are registered trademarks of Tingley Rubber Corp.

Companies Concerned With Foot Injury Hazards HaveAn Affordable Solution For Visitors Or Workers WhoRequire Steel Toe Protection

Tingley Rubber has produced the industry’s first injection molded PVC steel toe overshoe. Made to fit snug over mostshoe styles, our 100% waterproof seamless construction protects shoes from damage caused by site chemicals, contaminants, and wear.

Molded in oversized toe cap accommodates most shoestyles and exceeds ASTM F 2413-05 M/I/75/C/75.

Injection molded 100% waterproof protection.

Easily slips on over the bulkiest work shoes. Pull on taband heel kicker for easy on and off.

No hardware to conduct, tear, or snag, which helps prevent slips and falls.

Injection molded for more material in high wear pointareas and less material in the upper to reduce weight.

Special Frigiflex® PVC compound provides long wear, andflexibility in cold temperatures.

“ShoeLocks” molded into the vamp and above the heelcounter help insure a proper fit for a variety offootwear styles.

Tingley’s steel toe overshoe protects the user’s toes and shoes!

35211 Black Upper – Yellow Cleated XS – XLOutsole – Steel Toe

STEEL TOE OVERSHOE

Ideal Applications: Shipping, Warehousing,Baggage Handling, Food Processing, Mining,Construction, General Industry, Transportation,Onsite Visitors, and Temporary Employees.

Chemical Resistance: Some exposure to fats,certain acids, hydrocarbons, and caustics.

Cleated Outsole: Spits out debris providing excellent slipresistance. Wedge sole design is roomierto accommodate wider, thicker outsoleswith either wedge or conventional heelconstruction.

Men’s Women’s Men’s Women’sX Small 4-5 5-6-7 4-5 5-6-7Small 6-7-8 8-9-10 6-7 8-9Medium 8-9-10 10-11 7-8-9 9-10-11Large 10-11-12 9-10-11X Large 12-13-14 11-12-13This overshoe product is designed to fit a variety of footwear styles. Shoe styles with thicker solesmay require moving up one size for proper fit.

Overshoe Size Athletic/Dress Shoe Size Work/Hiker Shoe Size

SIZING

6

Turns Everyday Shoes Into On-The-Job Safety Footwear

7

Made Overseas To Our Exacting Specifications, OurConventional Rubber Overshoes Offer DomesticMade Quality That’s Affordable

Our overshoes are hand-layered, which allows us to put softermore flexible rubber in the uppers for less weight and morecomfort. Heavier layers are added to key contact points like thesole, heel, and toe for longer wear.

Hand-layered construction for 100% waterproof protection.

Ozone resistant rubber to reduce premature cracking.

Increased toe box height and roomier design help fitover bulky work shoes.

Rugged, cleated tread design spits out debris for great traction.

Heel kicker for easy off.

Stretch nylon knit liner for easy on and off, adds comfortand durability.

Buckle boots feature full-opening, self-draining gussetwith coated buckles to reduce corrosion and breakage.

Hand Crafted Overshoes, Built to Last!

Our overshoes have a roomier fit for bulky shoes.

Ideal Applications: Water and Sewer Utilities,Construction, Agriculture,and General Industry.

Chemical Resistance:Acids, alcohols, bases, and diluted water solutions of most chemicals that arewater soluble. Not recom-mended for constant contactwith petroleum and oil based products.

Deep Cleated Outsole: Spits out debris providing excellent slip resistance.

LEGGINMB943C Yellow Upper – Black Sole – Ht. 17” 7 - 15

BUCKLE BOOTSMR102A 2 Buckle – Black Upper – Black Sole 7 - 14

– Ht. 51⁄4”MR270A 5 Buckle – Black Upper – Black Sole 7 - 14

– Ht. 13”

OVER-THE-SHOE BOOTS

98

Over the Sock Footwear Guide...Tingley offers over the sock footwear in either Neoprene or PVC.

Our line of triple dipped, hand-layered neoprene is one of the mostcomfortable fitting boots available. The snugleg design is a much snugger fit than a standard knee boot and is excellent where walking,crouching, and kneeling are required.

We offer four distinct products in our PVC Boot line. Each of the products has been designed to meet different industrial needs. Most of our boots use a different compound for the upper and another forthe outsole. This allows for better flexibility in the shaft of the boot and longer wearing materials in the outsoles. Product performance isenhanced with high molecular weight PVC resins, specialty additives,and plasticizers. The most common cause of failures in PVC boots isdue to the extraction of plasticizers when PVC comes in contact withfats, oils, and many chemicals. Once the plasticizers are pulled out ofthe boot, the PVC becomes hard and is prone to cracks. The addition ofspecialty additives slows down this extraction process so that the bootwill generally last longer.

Material Selection: Before choosing a material where contact witha given chemical may occur, the user should perform their own tests. Ifhighly toxic chemicals are present, special care must be taken into consideration when choosing the correct protective product. This careshould include daily inspections to ensure that normal wear and tearhave not reduced the integrity of the product. Depending on the toxicity level of the chemical, products should be disposed of if intimate contact with the chemical has occurred.

HazProof: Utilizes very special formulations to enhancepermeation resistance and flame resistance to meet therigorous demands of hazardous waste cleanup. In addition,the HazProof formula will work well in animal fats, manyacids, alkalies, bases, oils, and petroleum hydrocarbons.Available in Style 82330 Page 14

Better Grade: Is made from a blend of high quality PVCresins and specialty plasticizers. Our Better Grade formulasoffer good balance of performance and price for many applications where some exposure to fats, certain acids,hydrocarbons, caustics, and other chemicals are present.Available in Styles 51144, 51244, 51446 Page 11

General Purpose: Is made from basic PVC resins andincludes some recycled PVC. Our General Purpose line, as itsname implies, is a good choice for less demanding generalpurpose applications. This formula will not provide the sameresistance to most chemicals that our other PVC formulationsprovide. Available in Styles 31144, 31244 Page 12

NEOPRENE: Is a synthetic rubber that is resistant to a broadrange of animal fats and blood, oils, certain acids,alcohols, alkalies, caustics, and certain solvents. OurNeoprene material comes in a brick red color so it canbe easily recognized in its application, as Neoprene.Available in Styles MB920B, MB921B, MB922B,MB924B, MB926B Page 13

Polyurethane Contour Insole:Best Comfort. Constructed of three layers for longwear and comfort. The top layer is made of polypropy-lene for moisture absorption. The middle is polyurethanewith open cell construction for breathability and support.The bottom layer is made of polyethylene, whichconforms to the shape of the foot for secure placement.Available in Styles CI124, CIM106 Page 10

Premier: Is made with a unique blend of high molecularweight PVC resins, and a high concentration of specialtyadditives and plasticizers to enhance the boot’s chemicalresistance. The Premier formula will withstand higher expo-sures of fats, certain acids, hydrocarbons, caustics, and otherchemicals than will our Better Grade and General Purpose

formulas. Available in Styles 93145, 93245, 94245Page 10

POLYVINYL CHLORIDE (PVC): Is a synthetic thermoplastic polymer thatprovides good protection against animal fats, many acids, alcohols, alkalies, bases,oils, and petroleum hydrocarbons. PVC is not recommended for use in ketones,

aldehydes. and many solvents.

REPLACEMENT INSOLES

OUTSOLE DESIGNS:

Cleated is a good choice when var-ied conditions are encountered and foruse outdoors. The outsole has largeropenings between the cleats, whichhelps to dig through mud as well asspitting out debris. The cleated outsolehas less surface area than other soles,which may reduce slip resistance inindoor applications as well as havingless volume of material in the cleatsfor wear. Available on Styles 31144,31244, 51144, 51244, 51446 Pages 11, 12

Chevron was designed by Uniroyal.This sole design was the standard inmany food processing applications. It has more edges in its design toenhance slip resistance when used in indoor applications where there is a limited amount of debris.Available on Styles MB920B, MB921B,MB922B, MB926B Page 13

Chevron-Plus takes the traditionalChevron sole to a higher level of performance. Designed to be more self-cleaning by maximizing the numberof edges and surface area for improvedslip resistance. More cleat material thanthe Cleated and Chevron for longerwear. Excellent on wet-contaminatedsurfaces. Available on Styles 93145,93245 Page 10

Safety-Loc is designed for use inenvironments with slippery wet-cleansurfaces. It maximizes the number ofedges and surface area for slip resist-ance. Not recommended for use inareas that have debris on surfaceswhich may get caught in the smallspaces between the cleats of thisdesign. Available on Styles 94245,MB924B Pages 10, 13

Sure Grip has excellent abrasionand slip resistance. Open cleats helpspit out debris. Available on Style82330 Page 14

INJECTION MOLDED KNEE BOOT FEATURES

1. Seamless construction provides 100% waterproof protection.

2. Graduated boot height by size for better fit.

3. Soft, lighter weight material injected in upper for more flexibility and comfort.

4. Extra material in heel and toe for longer wear.

5. Ankle patch for extra protection.

6. Heavy duty heel kick for easy off. 7. Beveled heel reduces back strain.

8. More abrasion resistant material injected in outsole for longer wear.

9. Finger tabs provide better grip when pulling boot on.

10. Wider shaft opening allows pant leg to easily tuck in boots.

11. Cut-off band for adjustable fit. 12. ASTM compliance molded in boot.

13. Our famous rocker last design cradles the foot and walks with you for all day comfort.

14. Flex lines in vamp for morecomfort when walking.

15. Steel toe styles meet ASTM F2413-05 M/I/75/C/75 for impact andcompression.

16. Size marked on front of bootfor easy identification off the shelf.

17. Low toe spring for more out-sole surface contact for better slipresistance. Also reduces back stress.

18. Specialty outsole designs available for specific applications.

19. Removable, high quality flat orcontour insoles.

20. Molded arch support for addedcomfort.

21. Men’s sizing clearly markedalong with women’s conversion sizefor added convenience.

22. Reinforced molded shank provides added support for arch.

...Over the Sock Footwear Guide

45

6

78

13

14

1516

18

21

2217

20

19

10 9

2

1

11

12

3

9

The Premier™ Boot Line Sets The Standard For PVCPerformance And Comfort

Our Premier boot is tough, yet extremely comfortable. ThePremier’s unique blend of high molecular weight PVC resinsand specialty additives offers superior chemical resistance to concentrates of fats, certain acids, hydrocarbons, caustics,and other chemicals. That’s why it is an excellent choice forfood processing and petrochemical applications.

Injection molded construction for 100% waterproof protection.

Soft and flexible upper material for all day workingcomfort.

Outsole material is soft for excellent slip resistance andwalking comfort while offering good abrasion andchemical resistance.

Safety-toe styles meet ASTM F 2413-05 M/I/75/C/75 forsteel toe caps and Electrical Hazard Protection.*

Chevron-Plus® or Safety-Loc outsoles provide excellentslip performance on wet-contaminated or wet-cleansurfaces, respectively.

Chevron-Plus outsole has more cleat material thanstandard Chevron designs, for longer service life.

Removable contour cushion insoles absorb moistureand shock for added comfort.

The Standard for Performance and Comfort

CHEVRON-PLUS OUTSOLES93145 Brick Red Upper – Cream Sole 4 – 14

– Ht. 15” – Plain Toe93245 Brick Red Upper – Cream Sole 3 – 14

– Ht. 15” – Steel ToeSAFETY-LOC OUTSOLE

94245 Brick Red Upper – Cream Sole 5 – 14– Ht. 15” – Steel Toe

PREMIER KNEE BOOTS

Ideal Applications: Suited for various jobswithin Food Processing, particularly Red Meat, Turkey, Dairy, Beverage, Chemical, and Petroleum Industries.

Chemical Resistance:Fats, certain acids, hydrocarbons, caustics, and other chemicals.

*Boot shall withstand 14,000 volts at 60 HZ and the current leakage shall not exceed 3.0 milliamperes.

Electrical Hazard soles and heels are intended to reduce the hazards due to accidental contact with live electrical circuits, electrically energized conductors,parts or apparatus. Electric Hazard soles and heels are not intended for wear inthose work environments where volatile chemicals or explosives may be present,where conductive footwear is required.

Warning: Electric Hazard features of the soles and heels, will deteriorate in wetenvironments and when worn with excessive wear on the soles and heels.

“Tough comfort” for food and petrochemical work.

10

Contour Insole:Cushioned removablepolyurethane insoleabsorbs shock foradded comfort.Styles:CI124 Sizes S-XLCIM106 Sizes 5-13

Safety-LocOutsole:For slip resistance on wet-cleansurfaces.

Chevron-PlusOutsole:For slip resistance on wet-contaminatedsurfaces.

Chevron-Plus® is a registered trademark of Tingley Rubber Corp.Premier™ is a trademark of Tingley Rubber Corp.

11

Our Better Grade PVC Knee Boot Is Durable On TheOutside And Comfortable On The Inside

Our Better Grade knee boot material is formulated with high quality PVC resins and low temperature additives. The result is a boot that has good abrasion resistance and excellent flexibility in cold temperatures.

Injection molded construction for 100% waterproof protection.

Flexible upper material stays supple in cold temperatures tomake walking easier.

Outsole material is soft for excellent slip resistance and absorbs shock when walking.

Steel toe meets ASTM F 2413-05 M/I/75/C/75.

Cleated outsole spits out debris for excellent gripping action.

Removable polypropylene insole wicks perspiration to helpkeep feet dry and comfortable.

Ideal Applications: General purpose for Agriculture and Industry, Municipalities, and many Food Processing applications.

Chemical Resistance: Fats, certain acids, hydrocarbons,caustics, and other chemicals.

At Tingley “Better Grade means a comfortablefit, good performance, and long wear.”

Cleated Outsole:Spits out debris for great traction.

51144 Brown Upper – Crepe Sole 3 – 14– Ht. 15” – Plain Toe

51244 Brown Upper – Crepe Sole 3 – 14– Ht. 15” – Steel Toe

WOMEN’S BETTER GRADE KNEE BOOTCLEATED OUTSOLE

51446 Blue Upper – Grey Sole 5 – 10– Ht. 14” – Plain Toe

BETTER GRADE KNEE BOOTSCLEATED OUTSOLE

The Best “Better Grade” PVC Knee Boot

51446

At Tingley, We Believe “Economy” Doesn’t Have ToMean An Uncomfortable Fit Or Poor Performance

When you are working in wet, muddy conditions, our General Purpose PVC knee boot provides easy walkingand all day protection.

Injection molded construction for 100% waterproof protection.

Flexible upper material stays supple in cold temperatures to make walking easier.

Tougher outsole material for good abrasion resistance.

Steel toe meets ASTM F 2413-05 M/I/75/C/75.

Self cleaning cleated outsole, spits out debris as you walk.

Removable flat high loft cushion insole, wicks perspiration to help keep feet dry and comfortable.

Affordable, All Day Comfort

Cleated Outsole: Spits out debris for great traction.

31144 Black Upper – Black Sole 3 – 14– Ht. 15” – Plain Toe

31244 Black Upper – Black Sole 4 – 14– Ht. 15” – Steel Toe

GENERAL PURPOSE KNEE BOOTSCLEATED OUTSOLE

Even our general purpose boots must meet Tingley’shigh standard for quality and performance.

12

Ideal Applications: General purpose inAgriculture, Industry, and Construction.

Chemical Resistance: Fats, certain acids, hydrocarbons, caustics, and other chemicals.

13

Flexible, Durable, Comfortable

In challenging work conditions Neoprene gives you more protectionthan rubber boots.

Ideal Applications: Food Processing,particularly Red Meat, Dairy, Chemical,Petrochemical, particularly Exploration, and Production.

Chemical Resistance: Animal fats andblood, oils, certain acids, alcohols, alkalies,and certain solvents.

ChevronOutsole: Spits out debrisfor slip resistanceon wet-contami-nated surfaces.

Neoprene Snugleg Boots Are Designed For ToughIndustrial Environments

Our Neoprene Snugleg Boots are made with a multi-ply manufacturing method. Every boot is triple dipped with twoneoprene coatings and one sealant, so the foot is surroundedby a layer of 100% waterproof and chemical resistant neoprene for optimum protection and extraordinary comfort.

Neoprene rubber will outwear standard rubber boots insolvents, caustics, hydrocarbons, oils, fats, and acids.Hand-layered construction allows for a soft flexibleupper and more material in the toe and heel contactpoints, for optimum comfort and protection.Safety-toe styles meet ASTM F 2413-05 M/I/75/C/75 EH,for steel toe caps and Electrical Hazard Protection.*Snugleg last design hugs the foot for all day workingcomfort.Removable polyurethane contour cushion insoles formaximum comfort.Dense fabric liner for easy on and off. Also wicks moisture and condensation.Chevron or Safety-Loc outsoles offer abrasion resistance and provide excellent slip performance onwet-contaminated or wet-clean surfaces, respectively.Steel shank for added arch support.

*Boot shall withstand 14,000 volts at 60 HZ and the current leakage shall not exceed 3.0milliamperes.

Electrical Hazard soles and heels are intended to reduce the hazards due to accidental contact withlive electrical circuits, electrically energized conductors, parts or apparatus. Electric Hazard soles andheels are not intended for wear in those work environments where volatile chemicals or explosivesmay be present, where conductive footwear is required.

Warning: Electric Hazard features of the soles and heels will deteriorate in wet environmentsand when worn with excessive wear on the soles and heels.

CHEVRON OUTSOLE MB920B Brick Red Upper – Brown Sole – Ht. 121⁄2” – Plain Toe 5 – 13MB921B Brick Red Upper – Brown Sole – Ht. 16” – Steel Toe 6 – 15MB922B Brick Red Upper – Brown Sole – Ht. 121⁄2” – Steel Toe 5 – 15MB926B Brick Red Upper – Brown Sole – Ht. 16” – Plain Toe 6 – 13

SAFETY-LOC OUTSOLE MB924B Brick Red Upper – Brown Sole – Ht. 121⁄2” – Steel Toe 6 – 15

NEOPRENE SNUGLEG BOOTS

Safety-LocOutsole:For slip resist-ance on wet-clean surfaces.

The World’s Most Advanced Hazmat Boot

Sure GripOutsole: Excellent abrasion and slip resistance.

The most comfortable Hazmat Boot available!

**Boot shall withstand 14,000 volts at 60 HZ and the current leakage shallnot exceed 3.0 milliamperes.

Electrical Hazard soles and heels are intended to reduce the hazards due to accidental contact with live electrical circuits, electrically energized conductors,parts, or apparatus. Electric Hazard soles and heels are not intended for wear inthose work environments where volatile chemicals or explosives may be present,where conductive footwear is required.

Warning: Electric Hazard features of the soles and heels, will deteriorate in wet environments and when worn with excessive wear on the soles and heels.

†Obsolete standard - replaced by ASTM F 2413-05

HazProof® Certified To NFPA 1991, 2005 Edition ForChemical And Hazmat Cleanup, Emergency Response,And Domestic Preparedness

Made of special polymer material, this comfortable boot meetsthe protective footwear chemical permeation requirements ofNFPA 1991 Standard on Vapor-Protective Ensembles forHazardous Materials Emergencies 2005 Edition. With the growing reality that chemical warfare agents are now a threatto the civilian population, domestic preparedness programs aredeveloping rapidly. The HazProof boot has also been tested toMilitary Standard 282 and will provide protection against certain chemical warfare blister and nerve agents!

Injection molded seamless construction for 100% liquidproof protection.

Larger foot area is engineered to accommodate theextra bulk of an encapsulated suit, for comfortable fit.

Smooth exterior surface for easy decontamination.

Stretch fastener closure system allows for easy on andoff while wearing gloves.

Meets ANSI spec. M/I/75/C/75, for steel toe impact and compression, and Electrical Hazard Protection.**†

Steel mid-sole meets and exceeds ANSI Z41 PT99 PR.†

Steel shank provides firm arch support.

Blown closed cell EVA mid-sole for all daycushion comfort.

Sure grip cleated outsole has excellentabrasion and slip resistance.

Bright orange color for high visibility.

Ideal Applications: Chemical and Hazmat Cleanup.

Chemical Resistance: Hazardous Waste.

82330 Orange Upper – Cream Outsole 7-13*– Ht. 11” – Steel Toe

RF823 Replacement Stretch Fasteners - 6 pc/bag

HAZPROOF BOOTSURE GRIP OUTSOLE

Test Method Results

Our HazProof Boot has surpassed the following Test Methods:

Permeation Resistance – ASTM F 739 andASTM F 1001 – 21 ChemicalsPermeation Resistance – MIL-STD-282Flame Resistant – ASTM F 1358Puncture Propagation Upper – ASTM F 1342Exceeds Protection Minimum Upper (Height)Electrical Hazard – ANSI Z41 PT99 EH **†

Puncture Resistance Sole & Heel – ANSI Z41 PT99 PR†

Abrasion Resistance Sole and Heel – ASTM D 1630Toe Impact Resistance – ANSI Z41 PT99 M I/75†

Toe Compression Resistance – ANSI Z41 PT99 M C/75†

Slip Resistance – ASTM F 489Cut Resistance Upper – ASTM F 1790Ladder Shank Bending Resistance –NFPA 1991, 2005

NOWNFPA1991

CERTIFIED!

14

*Size 13 oversized foot bed design will accommodate foot sizes up to 16. HazProof® is a registered trademark of Tingley Rubber Corp.

Tingley’s protective clothing line utilizes four polymer coating categories for its liquid proof barriers. Various compound formulations within thesepolymer categories are used to meet specific performance requirements. The use of high purity Neoprenes and Urethanes along with high qualityand specialty PVC coatings ensures the best products are available for theright applications.

Four fabrics in a variety of woven and non-woven construction, are used assubstrates, bonded to the coating to add strength and comfort characteristics.Nylon, Polyester, Nomex, and Nomex/Kevlar fabrics when combined withthe proper coating, result in cost effective material choices that provide thedesired comfort, durability, and protection levels.

Coating and Substrate Selection:Before choosing a material where contact with a given chemical may occur,the user should perform their own tests. If highly toxic chemicals are present, special care must be taken into consideration when choosing thecorrect protective product. This care should include daily inspections toensure that normal wear and tear have not reduced the integrity of theproduct. Depending on the toxicity level of the chemical, products should be disposed of if intimate contact with the chemical has occurred.

Coatings: The compounds applied on the inner, outer or both sides of a fabric to make it waterproof and improve its physical performance. Each coating possesses its own unique formula andproperties which dictate its performance in a givenapplication.

Neoprene - A synthetic rubber, legendary for itstoughness and durability. It is resistant to a broadrange of animal fats and blood, oils, certain acids,alcohols, alkalies, caustics, and certain solvents.Available in: Magnaprene. Page 18

Polyurethane - A synthetic polymer that possesses excellent durability and abrasion characteristics, with avery light weight. Polyurethane provides excellent protection against animal fats and oils, is good in mosthydrocarbon oils, organic acids, salts, alkalies, and in someinorganic acids. Available in: Iron Eagle, Eagle, andStormflex. Pages 17, 23

PVC (Polyvinyl Chloride) - A synthetic thermoplasticpolymer with a wide range of applications. PVC provides good protection against many acids, alcohols, alkalies, bases, oils, and petroleum hydrocarbons. Available in: American, Durascrim, Comfort-Brite, and most Economy products. Pages 19, 21, 23, 24, 25

Specialty PVC - Comprised of unique blends of high molecular weight PVC resins and specialty plasticizers.These additives significantly improve the coating’s resistance to a variety of elements, enhancing theirperformance over regular PVC coatings in similar environments. Our Specialty PVC formulas show better resistance to many fats, acids, hydrocarbons,caustics, and other chemicals. Available in:Webdri, Safetyflex, and Electra. Pages 19, 20, 22

Substrates: The material or fabric on which a coating is applied. Thematerial may be knitted, woven or non-woven. If the coating is applied onthe outside of a non-woven substrate, the material may be referred to as alining, however a lining may also be a separate layer of material sewn intothe garment for added comfort. In the case of non-woven substrates, thehigh-loft polyester material used not only provides the wicking propertiesand comfort of a lining but also adds strength to the coated material. Any garment without a separate lining or non-woven substrate is oftenreferred to as an unlined garment.

Nylon - Woven Nylon is popular for its lightweight, comfortable feel,along with its superior strength, toughness, and drying characteristics.Available in: Iron Eagle, Eagle, Magnaprene, Durascrim, and Storm-Champ.Pages 17, 18, 21, 23

Polyester - Polyester is known for its strength and mildew resistancealong with its quick drying properties.

Knit Polyester - Provides strength and stretch for added comfort.Available in: Safetyflex, Comfort-Brite, and select Economy products.Pages 20, 23, 24, 25Non-woven Polyester - High-loft substrates are utilized for their soft comfort and wicking properties. Non-wovens are generally not recommended in chemical applications where contaminants can wickand absorb into the fabric. Available in: Webdri and American. Page 19

Nomex - An aramid fiber which provides outstanding heat and flame resistance while possessing excellent thermal stability. This non-wovensubstrate maximizes protection and comfort. Available in: Electra. Page 22

Garment Construction:Tingley protective clothing is constructed utilizing one of two seamingtechniques/waterproofing methods. Different pattern design elements,such as sleeve cut and sizing, are incorporated to maximize fit and comfort when working. Suits utilize different hardware to meet both application and performance requirements.

Sleeve Design:

Batwing - This sleeve design is cut as part of the body material. The sleeveforms a 90 degree angle with the body of the jacket. This design providesadditional material in the shoulder and underarm area, making the batwingsleeve a popular choice for the increased freedom of movement it allowswhen working. Available in: Iron Eagle, Magnaprene, Webdri, American,Safetyflex, DuraScrim, Comfort-Brite, Electra, and select Economy products.Pages 17, 19, 21

90º Raglan - A common sleeve design, the raglan sleeve is cut separatefrom the body and joined with the garment at a 90º angle, tapered fromthe neckline to the underarm. This construction reduces the material usedin the sleeve area and offers less freedom of movement. Available in:Eagle and some Economy products. Pages 17, 18, 20, 22, 23, 24, 25

P r o t e c t i v e C l o t h i n g G u i d e . . .

15

Waterproofing Methods:

Stitched and Taped - The process of sewing two materials together and then applying a tape under heat and pressure to waterproof the seam. The additionof the tape to the already stitched seam makes the seam stronger than the material itself. This method provides good waterproof protection and is acceptablefor occasional chemical splash protection. It is generallynot recommended for constant exposure to toxic chemicalsbecause of the potential penetration of the needle holes and the absorption of the chemical by thread.Available in: Eagle and Magnaprene. Pages 17, 18

Therm-O-Rad Seams - The use of dielectric heat (high- frequency radio waves) and conventional thermal heat under pressure to fuse or form a molecular bond betweentwo layers of coated fabric. This process achieves a 100%liquid proof seam. The Therm-O-Rad seam provides excellentchemical protection because there are no needle holes that chemicals may penetrate or threads that may absorb.Available in: Iron Eagle, Webdri, American, Safetyflex,DuraScrim, Electra, Comfort-Brite, and all Economy products.Pages 17, 19, 20, 21, 22, 23, 24, 25

Standards Testing:Many of our protective clothing products are utilized in harsh environ-ments and are required to pass industry standards and test methods. Three clothing standards are referenced in this brochure, they are: ASTMD6413 for Flame Resistant Rainwear, ASTM F1891 for Arc ThermalPerformance, ANSI/ISEA 107 for High Visibility. Where referenced, Tingleyproducts meet or exceed the minimum requirement set for the standard.

ASTM D6413 for Flame Resistance of Textiles - This is a test method thatdetermines whether rainwear is flame resistant or not. A vertical flametest exposes a material to a 12 second calibrated, open flame. After theflame source is removed the material must self extinguish. There are nospecific time requirements for this flame-out to occur however, Tingleyadheres to the industry standard for industrial protective clothing which isa flame-out and afterglow less than 2 seconds. This standard pertains toworkers who are required to wear flame resistant clothing. Available in:Eagle, Safetyflex, Magnaprene, DuraScrim, Electra, Comfort-Brite.Pages 18, 20, 21, 22, 25

ASTM F1891 for Arc and Flame Resistant Rainwear - This standardspecification defines test methods and sets minimum requirements formaterial performance, in electrical arc environments. This standard is primarily utilized in the electric utility industry. Available in: Electra. Page 22

ANSI/ISEA 107 for High Visibility Safety Apparel - This standard specifiesrequirements for apparel, capable of signaling the user’s presence visuallyand intended to provide conspicuity of the user in hazardous situationsunder any light conditions by day and under illumination by vehicle headlights in the dark. Performance requirements are included for color,retroreflection, and minimum areas, as well as the recommended config uration of the materials. Test methods are provided to help ensurethat a minimum level of visibility is maintained when garments are subjected to ongoing care procedures. Available in: Electra, and Comfort-Brite. Page 22, 25

Hardware: Our protective clothing features two types of snaps.

Plastic or Delrin Snaps - Used on all of our flame resistant garments. All snaps are 24 linge high resin plastic and are non-conductive and non-corrosive. Available in: Eagle, Safetyflex, DuraScrim, Electra, Comfort-Brite,and select Economy products. Pages 17, 20, 21, 22, 23, 24, 25

Heavy Duty Nickel-Brass Snaps - Used with nylon caps on our non-flame resistant garments and are guaranteed not to corrode. Their uniqueassembly method alleviates the problem of snaps pulling apart or throughmaterial, which may render perfectly good suits useless. These snaps standup to heavy abuse and are great in food processing where metal detectionsystems are used. Available in: Iron Eagle, Magnaprene, Webdri, American,and select Economy products. Pages 17, 18, 19, 23, 24

Sizing:All garments are generously cut to provide maximum freedom of movement.All Tingley garments feature graduated lengths. The additional length addedto each garment helps reduce the need for custom sizing for taller individu-als. Not only do our garments provide a better more comfortable fit, theyreduce the number of sizes required to fit a work force. For the dimensions andsizing recommendations for specific garments, please refer to our sizing chart.

SIZINGJACKETSSizes S M L XL 2XL 3XL 4XL 5XLChest Size 36-38 40-42 44-46 48-50 52-54 56-58 60-62 64-66Garment Chest 46 50 54 58 62 66 70 74MeasurementJacket Length 29 30 31 31 32 32 32 33Sleeve Length 33 34 341⁄2 35 351⁄2 36 36 38

OVERALLS OR PANTSSizes S M L XL 2XL 3XL 4XL 5XLWaist 32-34 36-38 40-42 44-46 48-50 52-54 56-58 60-62Garment Inseam 28 29 30 31 32 32 32 33

COATSSize S M L XL 2XL 3XL 4XLChest Size 36-38 40-42 44-46 48-50 52-54 56-58 60-62Garment Chest 46 50 54 58 62 66 70MeasurementCoat Length 48 48 48 48 48 48 48Sleeve Length 33 34 341⁄2 35 351⁄2 36 36

16

The Iron Eagle® Exterior Coated PolyurethaneOn Nylon Suit Is Lightweight And Durable

Extremely comfortable and flexible, the Iron Eagle also has thedurability to resist fats, oils, pine tars, gasoline, grease, and a varietyof other chemicals. It is ideal for the toughest work conditions.

2 mil exterior coating offers unbelievable snag and abrasion resistance.

Sleek coating is easy to decontaminate and provides greatliquid shedding characteristics.

Heat sealed seams are stronger than the material itself andcan withstand extensive laundering.

Ideal Applications: Food Processing, Meat Packing, Forestry,Agriculture, Petrochemical, and Nuclear Utilities.

Breathable Eagle Polyurethane On Nylon Suit For AllDay Comfort And Wear

The most lightweight and comfortable suit we make, the EagleSuit is made of 200 denier nylon and coated on the inside withpolyurethane.

Breathable. Test method ASTM E96.

Interior polyurethane coating and exterior DWR (DurableWater Repellency) coating for 100% waterproof protection.

Generously cut to fit over the heaviest of work clothes.

Ideal Applications: Transportation, Meat Packing, Utilities,Municipalities and General Industry.

Heavy Protect ion, L ightweight Comfort

With Tingley’s polyurethane on nylon line, just because a suit is tough doesn’t meanit has to be uncomfortable to wear.

FEATURES & BENEFITS IRON EAGLE EAGLE5.5 OZ. 4.5 OZ.

Batwing sleeve construction and generously xcut for maximum freedom of movementRaglan sleeve construction for comfortable fit xTherm-O-Rad sealed seams for 100% waterproof protection xStitched and taped seams for 100% waterproof protection xStorm fly front seals out wind, rain, and contaminants x xPremium snap-lock suspender buckles x xHeavy duty suspenders w/crossover xHeavy duty snaps guaranteed not to fail xNon-conductive, non-corrosive snaps and buckles xMildew resistant x x

Chemical Resistance: Good in most hydrocarbon oils, organic acids, salts, alkalies, and in some organicsolvents. Not recommended in ketones, alcohols, and certain solvents.

17 Iron Eagle® is a registered trademark of Tingley Rubber Corp.

EAGLE – 4.5 Oz. Mat’l Wt. – 9 Mil ThickJACKETSJ21207 Yellow – Storm Fly Front – Hood Snaps S – 4XLJ21107 Yellow – Storm Fly Front – Attached Hood S – 4XLOVERALLSO21007 Yellow – Plain Front S – 4XLPANTSP21107 Yellow – Drawstring Waist – S – 3XL

Snap Fly FrontCOATC21207 Yellow – 48” – 2 Patch Pockets – S – 4XL

Vented Cape Back - Hood SnapsHOODH21107 Yellow – Detachable L

JACKETSJ22007 Gold – Storm Fly Front S – 4XLJ22207 Gold – Storm Fly Front – Hood Snaps S – 4XLJ22107 Gold – Storm Fly Front – Attached Hood S – 6XLJ22208 Green – Storm Fly Front – Hood Snaps S – 4XLJ22168 Green – Storm Fly Front – Attached Hood S – 6XLOVERALLSO22007 Gold – Plain Front – Snap-Lock Buckles S – 6XLO22107 Gold – Snap Fly Front – Snap-Lock Buckles S – 3XLO22008 Green – Plain Front – Snap-Lock Buckles S – 6XLAPRONA22007 Gold 35" x 45"PROTECTIVE SLEEVESS22167 Gold 18"HOODSH22147 Gold – Detachable LH22148 Green – Detachable L

IRON EAGLE – 5.5 Oz. Mat’l Wt. – 10 Mil Thick

Waterproof

Windproof

Breathable

Classic Neoprene Performance

Made of nylon and coated with neoprene, this Tingley Classic has performed for generations.

18

Light Weight MagnapreneTM Single CoatedNeoprene On Nylon Suit

Made of nylon and coated with neoprene, this classic is still oneof the toughest high performance suits on the market today.

Neoprene coating provides excellent abrasion performanceand resists oils, acids, chemicals, and solvents.

Stitched and taped seams are 100% liquidproof.

Nylon fabric provides excellent strength and durability.

Flame resistant. Test method ASTM D6413.

Ideal Applications: Petrochemical, Chemical, Off ShoreDrilling, Mining, Fishing, and Forestry.

FEATURES & BENEFITS MAGNAPRENE9 OZ.

Batwing sleeve construction and generously xcut for maximum freedom of movement

Stitched and taped seams, for 100% waterproof protection xStorm fly front seals out wind, rain, and contaminants xCorduroy tip collar for neck comfort xTake-up snaps on sleeves and ankle cuffs for adjustable fit xHeavy duty snaps guaranteed not to fail xMildew resistant xFlame resistant tested* x

Chemical Resistance: Animal fats, certain acids, alcohols, caustics, oils, and certain solvents.

* Flame resistant. Self extinguishing with flameout and afterglow less than 2seconds after removal of ignition source. (Test method ASTM D6413).

Magnaprene™ is a trademark of Tingley Rubber Corp.

JACKETSJ12207 Yellow – Storm Fly Front – Hood Snaps S – 4XLJ12148 Green – Storm Fly Front – S – 5XL

Attached Hood – Inner Cuffs

OVERALLSO12007 Yellow – Plain Front S – 4XL012008 Green – Plain Front S – 5XLPANTSP12008 Green – Plain Front S – 4XLCOATSC12148 Green – 48” – Storm Fly Front – S – 4XL

Attached Hood – Inner CuffsC12168 Green – 60” – Storm Fly Front – S – 4XL

Attached Hood – Inner Cuffs

HOODH12107 Yellow – Detachable L

MAGNAPRENE – 9 Oz. Mat’l Wt. – 12 Mil Thick

The Original Webdri® PVC On Polyester Suit IsDesigned For Comfort And Toughness

Webdri is a truly comfortable, high performance suit. Made with a heavy coating and a high loft lining, it can withstand extensivelaundering and duty. That is why it is one of our most popular suits.

Stitch bonded non-woven lining defies punctures and tearsas well as dissipates moisture.

Special PVC coating resists fats and oils.

Ideal Applications: Food Processing, Transportation,Construction, Manufacturing, and Forestry.

The American PVC On Non-woven Polyester Suit Is Affordable Yet Comfortable

The American is one of the most comfortable garments on the market.

Light weight coating is durable and stays supple in cold temperatures.

Non-woven lining absorbs moisture for all day comfort.

Ideal Applications: Agriculture, General Industry, Construction,and Municipalities.

Al l Day Comfort For Tough Jobs

When you are working all day in toughconditions, Tingley’s Webdri and Americansuits protect you and allow you to work comfortably.

JACKETS J31207 Yellow – Storm Fly Front – Hood Snaps S – 3XL J31107 Yellow – Storm Fly Front – Attached Hood S – 4XL OVERALLS O31007 Yellow – Plain Front S – 4XL O31107 Yellow – Snap Fly Front S – 3XL COAT C31207 Yellow – 48” – 2 Patch Pockets – S – 3XL

Vented Cape Back – Hood Snaps HOOD H31107 Yellow – Detachable L

WEBDRI – 13 Oz. Mat’l Wt. – 26 Mil Thick

JACKETSJ32007 Yellow – Storm Fly Front S – 3XL J32107 Yellow – Storm Fly Front – Attached Hood S – 4XLOVERALLSO32007 Yellow – Plain Front S – 4XLO32107 Yellow – Snap Fly Front S – 3XL

AMERICAN – 8 Oz. Mat’l Wt. – 18 Mil Thick

WEBDRI AMERICAN13 OZ. 8 OZ.

Batwing sleeve construction and generously x xcut for maximum freedom of movement

Therm-O-Rad sealed seams for 100% x xwaterproof protection

Storm fly front seals out wind, rain, and contaminants x xFull polar fleece thermal velour collar for neck comfort xPolar fleece thermal velour tip collar xPremium snap-lock suspender buckles x xHeavy duty snaps guaranteed not to fail x xSuspender crossover x xMildew resistant x xChemical Resistance: Many acids, oils, alcohols, salts, and alkalies.

FEATURES & BENEFITS

19Webdri® is a registered trademark of Tingley Rubber Corp.

Specialty PVC for Aggressive Applications

When you need a suit for aggressive applications, our high performance specialty PVC compound is engineered for thetoughest job requirements.

20

Safetyflex® is a registered trademark of Tingley Rubber Corp.

FEATURES & BENEFITS SAFETYFLEX13 OZ.

Full cut shoulder with 90° sleeve to body angle xfor maximum freedom of movement

Therm-O-Rad sealed seams for 100% liquid proof protection xStorm fly front seals out wind, rain, and contaminants xNon-conductive, non-corrosive snaps and buckles xHidden hardware for added protection xHigh collar with velcro throat closure for added safety xMildew resistant xFlame resistant tested* x

Chemical Resistance: Many acids, oils, alcohols, salts, and alkalies.

*Flame resistant. Self extinguishing with flameout and afterglow less than 2 secondsafter removal of ignition source. (Test Method ASTM D6413).

The Safetyflex® Flame Resistant Specialty PVC OnPolyester Suit Combines Tough Protection AndComfortable Fit

Made to resist industrial acids, chemicals, and caustics, SafetyFlexis engineered for protection.

Heavy exterior coating for excellent permeation performance.

High jacket collar with velcro throat closure for increasedsplash and drip protection.

All seams are Therm-O-Rad sealed. No needle holes forchemicals to penetrate.

Soft, supple feel for all day comfort.

Tapered sleeves are designed to fit in protective gloves oraccommodate glove rings for added safety.

Distinctive safety green color for easy identification.

Available as a coverall or a jacket and overall combination.

Ideal Applications: Chemical environments.

JACKETSJ41008 Green - Storm Fly Front - High Collar - Hidden Hardware S – 4XL

J41108 Green - Storm Fly Front - Attached Hood - Hidden Hardware S – 4XL

OVERALLO41008 Green - Plain Front S – 4XL

COVERALLV41108 Green - Attached Hood - Zipper Fly Front - S – 3XL

Tapered Sleeves - Ankle Take-ups

APRONA41008 Green 38”– 48”

PROTECTIVE SLEEVESS41108 Green 18”

SAFETYFLEX – 13 Oz. Mat’l Wt. – 17 Mil Thick

DuraScrimTM Double Coated PVC On Polyester SuitOffers Durability At An Economy Price

Extremely high tear strength is the result of an open weave polyester scrim fabric being sandwiched between two layers offlame resistant PVC coating.

Therm-0-Rad sealed seam construction for good chemicalsplash protection.

Thicker outside coating for better abrasion resistance.

Lighter interior coating protects fabric from chemical contamination.

Flame resistant. Self extinguishing with flameout and after-glow less than 2 seconds after removal of ignition source.Test method ASTM D6413.

Ideal Applications: Light Chemical, Construction, Utilities,Agriculture, Food Processing, and General Industry.

High Strength, Low Cost DuraScrim

At Tingley, a suit doesn’t have to be expensive to offer theprotection you need.

21

JACKETSJ56207 Yellow – Storm Fly Front – Hood Snaps S – 3XLJ56107 Yellow – Storm Fly Front – S – 5XL

Attached HoodOVERALLSO56007 Yellow – Plain Front S – 3XLO56107 Yellow – Snap Fly Front S – 5XLPANTSP56007 Yellow – Plain Front S – 3XLSUITS56307 Yellow – 3 Piece Suit – Jacket – S – 5XL

Storm Fly Front – Detachable Hood – Snap Fly Front Overall

COATC56207 Yellow – 48” – 2 Patch Pockets – S – 4XL

Vented Cape Back – Hood SnapsHOODH56107 Yellow – Detachable L

DURASCRIM – 8 Oz. Mat’l Wt. – 10.5 Mil Thick

FEATURES & BENEFITS DURASCRIM8 OZ.

Batwing sleeve construction and generously cut xfor maximum freedom of movement

Therm-O-Rad sealed seams for 100% xwaterproof protection

Storm fly front seals out wind, rain, and contaminants xTake-up snaps on sleeves and ankle cuffs for adjustable fit xSelf material collar resists contamination xNon-conductive, non-corrosive hardware xMildew resistant xFlame resistant tested* x

Chemical Resistance: Many acids, oils, alcohols, salts, and alkalies.

DuraScrim™ is a trademark of Tingley Rubber Corp.

*Flame resistant. Self extinguishing with flameout and afterglow less than 2 seconds afterremoval of ignition source. (Test Method ASTM D6413).

The ElectraTM Is Lightweight With Flame Resistant PVCOn Nomex®

The combination of flame resistant PVC coating on non-woven Nomexprovides excellent thermal performance and maintains 100% water-proof protection, in a soft, lightweight rainsuit.

Conforms to ASTM F1891 for Arc Thermal Performance.

ANSI/ISEA 107 Class 3 compliant suit, jacket, and coat for high visibility.

2” silver reflective trim reflects light for 360° nighttime conspicuity.

Fluorescent background colors for excellent daytime visibility.

Ideal Applications: Line Workers, Trouble Shooting, Substation,Switching, Pipeline Services, and Construction.

Tingley Electra is designed to meet the special demands of utility workers.

Full-vented cape back forimproved air circulation. D-ringaccess for fall protection harness.

Zipper/storm fly front seals outwind, rain, and contaminants. Fullcorduroy collar with hood in collar construction for comfortand convenience.

22

Thermal Performance Information Conforming To ASTM F1891 Test Method F1959

ARC Rating HAF% Break openElectra Yellow-Green 7 cal/cm2 69% 38.6 cal/cm2

Electra Orange-Red 11 cal/cm2 79.2% 36.4 cal/cm2

JACKETS J42122 Fluorescent Yellow-Green S – 5XLAttached Hood - Silver Reflective Tape J42129 Fluorescent Orange-Red S – 5XLAttached Hood - Silver Reflective TapeOVERALLS O42122 Fluorescent Yellow-Green S – 5XLSnap Fly Front - Silver Reflective Tape O42129 Fluorescent Orange-Red S – 5XLSnap Fly Front - Silver Reflective TapeCOATS C42122 Fluorescent Yellow-Green S – 4XLAttached Hood - Silver Reflective Tape

C42129 Fluorescent Orange-Red S – 4XLAttached Hood - Silver Reflective Tape

ELECTRA – 9.5 Oz. Mat’l Wt. – 15 Mil Thick

TM

High Visibility Apparel

*Flame resistant. Self extinguishing with flameout and afterglow less than 2 seconds afterremoval of ignition source. (Test method ASTM D6413).

Electra™ is a trademark of Tingley Rubber Corp.Nomex® is a registered trademark of E.I. du Pont de Nemours and Company

FEATURES & BENEFITS ELECTRA 9.5 Oz.

Full cut shoulder with 90° sleeve to body angle for xmaximum freedom of movement

Therm-O-Rad sealed seams, for 100% waterproof protection xZipper/storm fly front seals out wind, rain, and contaminants x Full flame resistant corduroy collar with hood in collar construction xNon-conductive hardware xOversized 3 piece hood with adjustable velcro take-up strap xFull-vented cape back for improved air circulation xD-ring access for fall protection harness xSelf material suspenders, and crossover xHeavy duty quick release suspender buckles xEasy access cargo pockets with closure xVelcro take-up straps for adjustable fit xMildew resistant xFlame resistant tested* xChemical Resistance: Many acids, oils, alcohols, salts, and alkalies.

23

Designed for 100 percent waterproof protection, our

economy line of rainsuits are generously cut for ease

of movement and comfort. With such features as

electronically welded seams, attachable and detachable

hoods, easy access cargo pockets, vented cape backs,

snaps for adjustable fit, and heavy duty zippers, they are

great for work or play. These imported suits are made to

meet Tingley's high standard for quality.

.35mm Industrial Work

• .35mm PVC on Polyester• Durability at an economical price• Storm fly front, take-up snaps,

non-conductive hardware, and more• Ideal for general purpose work

environments

E c o n o m y R a i n s u i t s ,

Storm-Champ®

• .20mm PVC on Nylon• Lightweight, soft, and

generously cut• Includes zipper front,

velcro take up snaps, pockets, and more

• Ideal multipurpose suit

Storm-Champ® and Stormflex® are registered trademarks of Tingley Rubber Corp.

Stormflex®

• .40mm Polyurethane on Stretch Knit• Stretchable material provides

unsurpassed comfort• Includes zipper front, hood-in

collar, take-up snaps and more• Ideal for active recreation

Comfort-Tuff®

• .35mm PVC on Polyester• Lighter weight, versatile, and durable• Includes zipper front, hood-in collar, corduroy

lined collar, take-up snaps, and more• Ideal for general purpose applications

Tuff-Enuff Plus™

• .25mm double ply PVC• Lightweight and affordable• Zipper front, take-up snaps, vented

cape back, and more• Ideal for multiple applications

with light duty

Tuff-Enuff™

• .20mm single ply PVC• Tough enough to reuse, economical

enough to throw away• Storm fly front, take up snaps, and

non-conductive hardware• Ideal for light duty

general industry

Poncho • One size fits all Ponchos

can be easily stored forconvenient use whenunexpected weatherhits.

INDUSTRIAL WORK – .35MM PVC ON POLYESTER – 14 Mil ThickJACKETSJ53207 Yellow – Detachable Hood S – 3XL J53107 Yellow – Storm Fly Front S – 3XL

– Attached Hood OVERALLO53107 Yellow – Snap Fly Front S – 3XLSUITS53307 Yellow – 3 Pc – Jacket – Storm Fly S – 5XL

Front – Detachable Hood – Fly Front Overall

COATC53217 Yellow – 48”– Storm Fly Front – S – 2XL

Detachable HoodTUFF-ENUFF PLUS – .25MM DOUBLE PLY PVC – 10 Mil Thick

SUITSS62211 Blue – 2 Pc – Jacket – Zip Front – S – 3XL

Snap Fly Front Pants – Retail Packed S62217 Yellow – 2 Pc – Jacket – Zip Front – S – 3XL

Snap Fly Front Pants – Retail Packed TUFF-ENUFF – .20MM SINGLE PLY PVC – 8 Mil Thick

SUITSS61317 Gold – 3 Pc – Jacket – Storm Fly S – 3XL

Front – Detachable Hood – Plain FrontOveralls – Retail Packed

S51307 Yellow – 3 Pc – Jacket – Storm Fly S – 2XLFront – Detachable Hood – Plain Front Overalls

COATC61210 Clear – 48” – Storm Fly Front – XS – 3XL

Detachable Hood – Retail PackedCOMFORT-TUFF – .35MM PVC ON POLYESTER – 14 Mil Thick

SUITSS63217 Yellow – 2 Pc – Jacket – Storm Fly S – 3XL

Front – Attached Hood – Fly FrontOveralls – Retail Packed

S63219 Blaze Orange – 2 Pc – Jacket – S – 3XLStorm Fly Front – Attached Hood – Fly Front Overalls – Retail Packed

STORM-CHAMP – .20MM PVC ON NYLON – 8 Mil ThickSUITSS66211 Royal Blue – 2 Pc. – Jacket – Zipper S – 5XL

Front – Attached Hood – Plain FrontWaist Pants – Retail Packed

S66218 Forest Green – 2 Pc. – Jacket – Zipper S – 3XLFront – Attached Hood – Plain FrontWaist Pants – Retail Packed

STORMFLEX – .40MM POLYURETHANE ON STRETCH KNIT –16 Mil Thick

JACKETJ67111 Navy/Green – Zipper Front – S – 2XL

Attached Hood – Retail PackedPANTSP67018 Green – Plain Front – Retail Packed S – 2XL

PONCHOS – .10MM PONCHOS - One Size Fits All – 50" x 80"PONCHOSP68800 Clear – Attached Hood – Side Snaps

– Retail PackedP68808 O.D. – Attached Hood – Side Snaps

– Retail PackedP68809 Orange – Attached Hood – Side Snaps

– Retail Packed

G e n e r o u s F e a t u r e s

Tuff-Enuff™ and Tuff-Enuff Plus™ are trademarks of Tingley Rubber Corp.Comfort-Tuff® is a registered trademark of Tingley Rubber Corp.

24

High visibility, flame resistant rainwear at its best!

FEATURES & BENEFITS COMFORT-BRITE

Full cut shoulder with 90° sleeve to body angle xfor maximum freedom of movement

Therm-O-Rad sealed seams for 100% waterproof protection xZipper/storm fly front seals out wind, rain, and contaminants xNon-conductive hardware xRoll-a-way hood in collar design for added convenience xFull-vented cape back for improved air circulation xD-ring access for fall protection harness xSuspenders with quick release buckles and crossover xEasy access cargo pockets with closure xVelcro take-up straps on sleeve and ankle cuffs for adjustable fit xMildew resistant xFlame resistant tested* xChemical Resistance: Many acids, oils, alcohols, salts, and alkalies.

*Flame resistant. Self extinguishing with flameout and afterglow less than2 seconds after removal of ignition source. (Test method ASTM D6413).

Comfort-Brite® is a registered trademark of Tingley Rubber Corp.Job Sight™ is a trademark of Tingley Rubber Corp.

JACKETS J53122 Fluorescent Yellow-Green S – 5XLAttached Hood - Silver Reflective Tape J53129 Fluorescent Orange-Red S – 5XLAttached Hood - Silver Reflective TapeOVERALLS O53122 Fluorescent Yellow-Green S – 5XLSnap Fly Front - Silver Reflective Tape O53129 Fluorescent Orange-Red S – 5XLSnap Fly Front - Silver Reflective TapeCOAT C53122 Fluorescent Yellow-Green S – 4XLAttached Hood - Silver Reflective Tape

COMFORT-BRITE - .35MM – 14 Mil Thick

Comfort-Brite® - The Ultimate General PurposeRain SuitHighly visible, flame resistant, and loaded with special features.Comfort-Brite is lightweight, durable, and affordable.

ANSI/ISEA 107 Class 3 compliant suit, jacket, and coat for highvisibility.

Flame resistant tested ASTM D6413.

Loaded with special features for multipurpose applications.

Fluorescent orange-red or yellow-green background materialfor excellent daytime visibility.

2” silver reflective tape reflects light for 360°nighttime conspicuity.

Ideal Applications: Utilities, Telecommunications, Construction,Transportation, DOT’s, Municipalities, Waste Management, and General Industry.

25

Comfort-Brite®

Be Seen... Be Safe...

TM

High Visibility Apparel

C h e m i c a l D e g r a d a t i o n C l o t h i n gF o o t w e a r

PVC

Premier PVC

Neoprene**

PVC**

Special PVCPoly/Nylon**

Neoprene

RISK CODE

Natural Rubber

HYDROCARBONS (OILS)

ASTM Oil #1 T E NR G E G F G G

ASTM Oil #3 NA E P F E F F F GCastor Oil NA G E G E G P G FCoconut Oil NA E F F E E G G GCottonseed Oil NA G P P E G P P GCutting Oil - NA G P P E G P G GSulfur BaseGrease - Pet Base NA E P P E E P P GLard NA G P G E G P F FLinseed Oil NA G P P G G P P GMineral Oil NA G P P E G F G GOlive Oil NA G P P E G P P GPine Oil NA P P P G P P F GSoybean Oil NA F P P E F NR F FTallow "Beef Tallow" NA G P P E G P F E

HYDROCARBON (SOLVENTS)Benzene* T P P P P P P P PBenzyl Chloride T P P P P P P P PButane NA E P P F E P P FCarbon Tetrachloride T P P NR NR P P F PChloroform X P P P NR P P PCyclohexane V P P F G P P F FGasoline (Cracked) X F F F G F F F GGasoline (SR) X G NR F G G F F GHexane X E P P G E P P GKerosene (CT) (JET) X P NR F G G F F GKerosene (Pet) X G NR F G G P G FMethyl Cellosolve NA G P G G F P P PMethyl Chloride T NR P P NR NR NR NR NRNaptha X NR P F G P P F FNitrobenzene T NR P NR NR P P P PPerchloroethylene X P P P F P P P FPetroleum Solvent V F P NR NR F P F FPropane NA G P F G G F G GToluene X P P P P P P P FTrichloroethylene X P P P P P P F FTrinitrotoluene NA F P G G F G G FTurpentine X/S P P P G P F F FXylene X P P NR NR P P F F

KETONES

Acetone V G F P NR G P P FChloroacetone NA G G P P G P P PMethyl Ethyl Ketone V P F P P F P P F

ALDEHYDES

Acetaldehyde Xi E NR NR NR E F F PBenzaldehyde X P F P P P P P PButyraldehyde Xi P NR F F G P P PFormaldehyde - <37% * T/S E E E E E G E PFurfural T G F P P G P P F

ALCOHOLS

Amyl Alcohol X E G G G E G E PBenzyl Alcohol Xi E G G G E F F NRButyl Alcohol X E E G G E G G GDiacetone Alcohol Xi E P P P E F G FDiethanolamine Xi G F P F F NR F NREthyl Alcohol X/S E E G E E G G FEthylene Glycol Xi E E E E E G E GGlycerine NA E E E E E E E EMethyl Alcohol - T E E E E E F G GMethanolOctyl Alcohol X E E E E E F G GPropyl Alcohol X E E E E E F G GTriethanolamine Xi G G G G G G G G

C l o t h i n gF o o t w e a r

PVC

Premier PVC

Neoprene**

PVC**

Special PVCPoly/Nylon**

Neoprene

RISK CODE

Natural Rubber

ORGANIC ACIDS

Acetic Acid - Cx E G F F E F F PGlacial 99%Carbolic Acid - T/C P NR G F F F F P(Phenol) 70%Citric Acid - <30% NA E E E E E E E PFormic Acid Cx E E G G E G E PLactic Acid C E F E E G G E PMaleic Acid Xi F F E E E F E GOleic Acid NA G P P G G P P EStearic Acid NA G P P F G NR G GTannic Acid Xi E E E E E E E GE

INORGANIC ACIDS

Carbonic Acid - H2O NA E E E E E E E EHydrobromic Acid T/Xi P G G G P P G PHydrochloric Acid - 70% Xi F E G G G G E GHydrochloric Acid - <10% Xi E E G E E G E GHydrofluoric Acid - Tx/Cx P P NR NR P F G NRConc. 99.99%Hydrogen Sulfide-Gas T/Xi G P G G G G G NRNitric Acid - Conc. 70% Xi P P G G P F F PNitric Acid - 10% Cx F F E G F F G PPerchloric Acid - Cx G F F F F P G PConc. 70%Phosphoric Acid - C E G G G G F G PConc. 86%Sulfuric Acid - Cx NR P F F P P G PConc. 93% Sulfuric Acid - <30% C G F G G G P E P

SALTS AND ALKALIES

Ammonium Hydroxide C E P G G E G G P- 30-70%Ammonium Sulfate T E G E E E G E GCalcium Chloride - X E E E E E E E ECrys. Del.Calcium Hypochlorite - T/Xi G G G G F G E FCrys. Sol.Caustic Potash-Caustic NA E G E E E G E GCopper Chloride T E E E E E E E GCopper Sulfate - Crys. T/Xi E G G E E F G GFerric Chloride NA E E E E E E E EPotassium Dichromate T E G G E E G G G-H2O-Sol.Sodium Hydroxide - Cx E E E G E G G G Conc. 70%Sodium Hypochlorite - C G F E G G E E G30%Tin Chloride T G E G G G F G P

ORGANIC ESTERS

Amyl Acetate V P F F F P F F PButyl Acetate V P P P P P P P FDibutyl Phthalate Xi F NR P P F P P PEthyl Acetate V NR NR P P G P P FEthyl Formate NA G P F F G F G NRMethyl Acetate V G NR P P G P P FPropyl Acetate V P P P P P P P PTricresol Phosphate T F F F F F F F F

MISCELLANEOUS

Acrylonitrile* T P P NR NR F P P PAniline T G NR F F G F F NRBattery Acid C G G G G E G E PBlood NA G F F F G F F FButter NA E P P G G P P GButtermilk NA G P F E G G E FCarbon Disulfide T P P P P P P P PChlorox (Sodium Xi E G E E E E E EHypochlorite 5-6%)Dibenzyl Ether Xi G P P P G P P GEthyl Ether X F P P F G P P GFish Oil NA G P P G G P F GHydrogen Peroxide - Tx/Xi P P F F P G E NR90%Milk NA E F F E E F G GMonoethanolamine Xi NR F G G F F G GMorpholine C/X NR P F F P F F PPaint Remover - Xi F P P P F P P PAcet-Alcoh-MCSoaps NA G G E E G G E F

KEY TO FOOTWEARNEOPRENE - Molded Overshoes; Hand-made Footwear NATURAL RUBBER - Molded Overshoes, Hand-made Footwear PVC - Two Stage Injection Molded, Better Grade,

General Purpose, Workbrutes PREMIER PVC - Two Stage Injection Molded, Premier

Key to Degradation Ratings: E = Excellent G = Good F = Fair P = Poor NR = Not Recommended*A known or potential carcinogen.**These materials are available in both heat seal construction garments as well as stitch tape seam construction. We recommend a heat sealed garment (Iron Eagle Polyurethane, Safetyflex, Durascrim) for any application for protective clothingwhich will encounter a toxic or highly corrosive chemical.Information in this chart is intended as a general guide only. The ultimate determination of suitability of a product for a particularapplication is the responsibility of the purchaser. Upon written request, a sample of the material in question will be furnished toaid the purchaser in determining its suitability.

KEY TO CLOTHINGNEOPRENE** - Premier, Magnaprene POLYU/NYLON** - Iron Eagle, Eagle PVC** - American, Scrim, DuraScrim

- PVC Polyester, Double-Ply PVC, PVC Film SPECIAL PVC - Webdri, Safetyflex, Electra

Risk code ratings and their meanings derived from The Chemical Protective Clothing Performance Index Book. Copyright 1989.

ChemicalChemical

RISK CODES RATINGS: Tx = HIGHLY TOXIC; X = HAZARDOUS TO HEALTH (LESS TOXIC); T = TOXIC; Xi = IRRITANT; Cx = HIGHLY CORROSIVE;S = SENSITIZATION; C = CORROSIVE; V = POTENTIALLY HARMFUL; NA = NOT ASSIGNED

2005 - 05/10