A Solution for 8-bit to 32-bit migration

www.oasistechsol.comOasis Technologies Pvt. Ltd.

The Titan-II board is specifically designed keeping in mind the requirements for migration from a 8 bit to 32-bit in embedded platforms development. Its unique multi-

processor architecture empowers developers to seamlessly migrate from their existing 8-bit 8051 based solutions to 32-bit ARM platform.

1. Hardware:

Oasis Board.

· Power supply adaptor(SMPS)

· 9-pin D-shell serial cable

· USB cable (optional)

2. Software & documentation

(CD-ROM contents)

· Sample code for ARM & RTOS programming.

· Documentation including data sheets and the

ARM user manual.

· Board User Manual Soft Copy

• Titan-II

Titan-II

TITAN-IITITAN-II

Titan-II board highlights

TITAN-II Board Kit Contents

? Supports dual architectures ARM and 8051. ? NXP (Philips) LPC21xx 32 bit ARM controller

? NXP (Philips) 89V51RD2 8 bit micro controller (optional) ? I2C devices- RTC & EEPROM

? Relay ? Stepper motor driver ? I2C based IO Expander

? Full speed USB device interface (optional) ? CAN Controller interface (optional)

? GPIO Headers ? JTAG Header ? Rs232 based serial ports ? USB to serial convertor

Architecture Diagram

TITAN-II Board Specifications:

Processor ARM7TDMI or 89V51RD2Flash 256KB/512KB, 32bit wide

or 64K FlashSRAM 16KB/32KB, 32 bit wide

Or 1K RAMSerial 2X Rs232 based serial interfaceExpansion 1X 20Pin, 1 X 34 Pin headersDimension 230mm X 180mmTemperature 0 °C/70°C

?????

Expansion header for External interrupt Push button for an external interrupt Slide switch to select ISP/ RUN mode Push to ON switch for Board Power ON/OFF

RTOS Support: uCOS-II

? ? ? ? ?????????

On board LPC2148, 32 bit ARM ProcessorOn board external clock frequency 12MHzI2C Based Serial EEPROM (256/512k)I2C Based RTC with battery

On Chip 10 Bit ADC with Pot On Chip 10 Bit DAC Two 32 Bit timer/PWM & Watchdog Timer Push Button Switch for Reset Two UART - RS 232 Serial Interface USB 2.0 Device interface (For LPC2148) SD/MMC Interface, Ps2 Interface 8 User programmable LEDs.

I2C I/O Expander with header

?? ? ? ?? ? ?

4 X 4 matrix keypad, DIP switch for Input4 Seven segment Display16 X 2 LCD Display, DC Volt RelayBuzzer Interface, Temperature Sensor

Stepper Motor driver Interface20 Pin debugging header JTAG interfaceGPIO Expansion header

Expansion header for SPI and I2C bus

TITAN-II Board Features

16 X 2 LCD 7-SEG

LED STEPPER MOTOR RELAY GENERAL IO-1

4X4 KEYPAD RTC

EEPROM

I2C IO Expander

JTAG (20Pin)

Power Supply

ADC (Analog IN)

RUN/ISP SWITCH

CAN (Optional)

COM1

LPC 21xx

89V51RD2(Optional add on module)

Reset

Ext. Int

SD/MMC

USB to Serial

COM 2

GENERAL IO-2

GRAPHIC LCD

Oasis Technologies Pvt. Ltd.

Ph : + 91-20-64000203, + 91-20-66870500Email : sales@oasistechsol.comWebsite : www.oasistechsol.com

Oasis Technologies Pvt. Ltd. is a leading provider of embedded technologysolutions. Our mission is to provide quality and cost effective embeddedsystems solutions which helps our customers to expedite their design anddevelopment process and reduces time to market.

Copyright © 2012 Oasis Technologies Pvt. Ltd. All rights reserved. All other names mentioned are trademarks, registered trademarks or service mark of their respective companiesNote:Due to ongoing development, the features listed are subject to modification without prior notice.

Variants

Titan-II - BX NXP (Philips) LPC2138

Titan-II - CX NXP (Philips) LPC2148512K Flash, 32K RAM,DAC, USB Device,

RTOS capability (uCOS-II),

512K Flash, 32K RAM, DAC, RTOS capability (uCOS-II)

Unique Features

In order to bring out the features of flexibility, in the process of embedded development and at the same time keeping in

mind the cost effectiveness of the solution, the Titan-II board comes in various flavors. The supported variants are

listed below.

TITAN-II Board Variants

Sr. No.

Titan-II - DX NXP (Philips) LPC2129 256K Flash, 16K RAM, CAN, RTOS capability (uCOS-II)

1

2

3

4 64K Flash, 1K RAMAdd - on module(optional) NXP (Philips)

P89V51RD2

Office No. 505, 506 & 507, 5th Floor,Block - III, Lloyds Chambers, Near Sinchan Bhavan, 409 Mangalwar Peth, Pune - 411011.