titan new holland summer 2011 parts plus

PARTSPLUS

PARTSPLUS

Summer 2011Edition 1

2 titanmachinery.com | Summer 2011

Subject to availability. Prices subject to change without notice.

Tit

an D

eal

Deals you can'T miss!

Pistol Grip Grease Gun$25.94Part No. MN5403

10 PackNH Lithium

Grease$34.80Part No. 132096A1

Buy 11 cans

GeT

1 FRee

TiTan Deal - PResenT THis couPonPistol Grip Grease Gun and

10 Pack of NH Lithium Grease

$44.99*Limit 3 per customer. Offer Valid through August 31, 2011. Limited quantities available.

Subject to availability. Must present coupon for special offers. Taxes not included.

TiTan Deal - PResenT THis couPon

Chain & Cable LubricantBuy 11 and get1 FRee

*Offer Valid through August 31, 2011. Limited quantities available. Subject to availability. Must present coupon for special offers. Taxes not included.

chain & cable lubricantPart No. B505500 ................................... $6.04/can

CRA3FG11

CRA4FG11

BeTTeR ToGeTHeRBuy A cAse of GreAse And GreAse Gun

for only

3titanmachinery.com | Summer 2011


Tim

e to check your c

oolant...

As diesel engines operate, vibration of the cylinders creates microscopic bubbles in the coolant that attach to the cylinder liners. These bubbles can implode with a force of over 15,000 PSI. This collapse can blast small holes in the cylinder liner. Without the protection of a heavy-duty coolant, the result is liner cavitation.

Over time, liner cavitation can allow coolant to enter the engine oil. This compromises the lubrication of the engine oil and results in excess friction, which ultimately leads to engine failure. Many competitive coolants don’t provide adequate protection against this. XHD offers superior liner cavitation protection by covering internal parts with an oxide film that takes the abuse of implosions to avoid premature engine failure.

Imploding bubbles damage liners...

...which can cause cavitation

XHD HEavy-DuTy coolanT/anTiFREEzEMajor diesel engine manufacturers estimate that more than 50% of engine failures are cooling system related. Worn rings, scuffed pistons, cracked heads and corroded bearings may appear to have nothing in common with the cooling system, when in fact, these problems are often the symptoms of improper cooling system maintenance. Using XHD, a heavy-duty coolant formulated for use with off-road equipment, will help you avoid premature engine failure.

Part No.

Product Size Price

B30204 XHD Premix 1 Gal/3.785 L $14.50

B30205 XHD Premix 2.5 Gal/9.46 L $33.89

B30206 XHD Premix 55 Gal/208.19 L $712.91

B30207 XHD Premix 330 Gal/1249.2 L $3,585.98

B30201 XHD Concentrate 1 Gal/3.785 L $22.32

B30202 XHD Concentrate 55 Gal/208.19 L $1,175.26

B30203 XHD Concentrate 330 Gal/1249.2 L $6,536.84

Pre-Mix ANd

CoNCeNtrAte

AvAilAble!



Hay

Equ

ipm

ent

RounD BalER - mainTEnancE KiTSApplication: BR730, BR730A, BR740, BR740A, BR750, BR750A, BR770, BR770A, BR780, BR780A• Designed for larger repair jobs • Includes major components • OE Components

Bearing Kit: Drive RollerPart No. 87298537 .........................................................$248.40

Starter Roll Drive KitPart No. 87298512 .........................................................$258.89

Bearing Kit: 2-Pack Roller Tailgate NosePart No. 87298538 .........................................................$138.78

Top Roller chain Drive KitPart No. 87298513 .........................................................$596.21

Bearing Kit: 2-Pack Top Tailgate RollerPart No. 87298539 .........................................................$134.46

Pickup Guard Kit 10 packPart No. 87298535 .........................................................$141.72

apron & clutch Drive Sprocket KitPart No. 87298524 ........... $82.41

carrier Bearing Kit2M reel with curved fingers - 6 packPart No. 87298530 ....... $101.30

idler Sprocket KitPart No. 87298552 ........... $53.89

Pickup Finger Kit4-packPart No. 8729851 ............. $24.55



Hay E

quipment

DiSc mowER / mowER conDiTionERS

Disc mower Knife with Hardware Kits

Disc Mower Knife14° TwistPart No. 8727008A

$14.67

Disc Mower Knife"V" Rock KnifePart No. 87297011A

$13.27

New hollaNd dISC MoweR CoNdITIoNeRS aNd wINdRoweRS wITh dISC headS

rotary disc Mower Blade Selection7° twist KNivesThe 7° twist knives are recommended for abrasive soil and rocky crop cutting conditions. These knives function well in a wide range of field and cutting conditions.

14° twist KNives (stANdArd equiPMeNt) ANd 14° twist serrAted KNivesThe 14° twist knives are recommended for most crop conditions. The greater twist angle enables the knife’s cutting edge to cut closer to the ground and provide more lifting action to move the crop over the cutter bar into the conditioner, producing a cleaner cut. The greater twist angle in these knives makes them more susceptible to rock damage.

"v" KNivesThe “V” knives are recommended for operation in rocky conditions where excessive knife bending is a concern. This style knife has greater resistance to bending when coming in contact with a foreign object. The cutting quality of this knife is not as good compared to the twisted knives.

Part No. deScriPtioN/tyPe Pitch/rotatioN Price9847683 Knife - 7° Twist CW $1.80

9847684 Knife - 7° Twist CCW $1.85

86621872 Knife - 14° Twist CW $1.73

86621873 Knife - 14° Twist CCW $1.73

87029587 Knife - 14° Twist OS CW $2.54

87029588 Knife - 14° Twist OS CCW $2.54

86532078 Knife - "V" Rock Blade $3.27

KNiFe SeLectioN

7° Tw

ist14

° Std.

14° S

errated"v

" Knives



Hay

Equ

ipm

ent

GuaRDS

nEw HollanD GuaRDSThe performance and durability is in the superior double heat treatment of critical wear surfaces.

New Holland employs high industry standards using a special heat treatment process on the back bar to reduce wear between the guard and the section.

New Holland applies an additional induction-hardening process to the trash bar as well. This maintains a more durable surface for peak performance and long service life.

New Holland applies an additional induction-hardening process to the ledger areas to provide a longer wear-sharp surface for more efficient cutting. These ledger areas are also wider for additional service life.

Part No. deScriPtioN Price86615982 Main Guard $17.44

86615988 Knife Section - XHTS BL BK $1.24

86616588 Knife Section - XH TREX BL BK $1.36

86616591 Knife Section - XH TREX PL BK $1.41

86616057 Knife Assembly - 8' LH $208.77

86616058 Knife Assembly - 8' RH $196.81

TREX = T-REX (7 serration/inch) XH = Extra Heavy ThicknessBK = Backhardened TS = Top SerratedPL = Chrome Plated BL = Black Finish

TWInE SolUTIonSnew Holland Plastic Bailing Twine offers maximum strength and long-lasting durability. It is available in a variety of strengths for all baling conditions and can be stored outdoors for up to 18 months without deterioration.

• Makes tight bales• Strength and diameter are always uniform• Will not rot• Non-Toxic and harmless if eaten by animals• Can be stored outdoors for up to 18 months

without significant damage• Designed to provide maximum strength and

ultimate performance• UV Stabilized to withstand extreme sunlight

exposure

new Holland natural Fiber Twine - the 100% biodegradable twine that helps keep your fields healthy. Sisal Baler twine is made from natural fibers that break down completely and put no toxic material into the soil.

• Uniform Thickness• Entirely Biodegradeable• Mildew Resistant• Consistent tensile/knot strength• Only the best Brazilian fibers used• Every bale contains exact footage shown

on the labelDesigned to provide maximum strength and

UV Stabilized to withstand extreme sunlight

on the labelDesigned to provide maximum strength and

UV Stabilized to withstand extreme sunlight

See your

Titan Machinery

Store for pricing

and availability.

1

1

2

3

2

3



SHocKPRo™ SHocK PRoTEcTion HuB KiT

SKiD SHoE KiT - nEw moDElS

DiSc mowER RocK GuaRD KiTS - nEw moDElS

Hay E

quipment

Hay PaRTS

NEW

HO

LLA

ND

SH

OC

KPR

OS

HO

CK

PR

OTEC

TIO

NH

UB

KIT

S

ShockPRO Shock Protection Hub Retro-fit Kit.Components for two modules.Part No. 87602273

ShockPRO Shock Protection Hub Repair Kit.Component to repair one ShockPRO ShockProtection module. Part No. 87580643

Less downtime and less repair cost with the new ShockPROShock Protection Hub Kits.

• The ShockPro Shock Protection Hub Kits are designed to provide shock protection to the individual cutter barmodules should the knives contact larger obstacles.

• The new style shock hub has a reduced number of splines, which will shear off prior to failing internal cutter bargear teeth. Provides protection for the top cap assembly.

• Retro-fit kit includes a hub seal which prevents any metal fines from entering and damaging module components.

• Clamp loading on the shock hub drives the disc after shearing to prevent domino effect failures by allowing disc topartially retime.

• ShockPRO Hub Retro-fit Kits can be quickly and easily installed. Components and installation instructions included inthe retro-fit kit, Part No. 87602273.

• ShockPRO Hubs can be quickly and easily repaired. Components and installation instructions included in the repair kit,Part No. 87580643.

ShockPRO™ Shock Protection Hub KitsReduce downtime and lower repair cost with the new ShockPRo Shock Protection Hub Kits.

• The ShockPRO Shock Protection Hub Kits are designed to provide shock protection to the individual cutter bar modules should the knives contact larger obstacles

• The shock hub reduces the number of splines, which will shear off before failing of cutter bar gear teeth. It also provides protection for the top cap assembly.

• ShockPRO hubs can be quickly and easily repaired. Components and installation instructions are included in the repair kit.

ShockPRo Shock Protection Hub Repair Kit - Part no. 87580643 ........................$40.31

application: 1409, 1410, 1411, 1412, 1431, 1432, 1441, 1442, 2331, 2332, 2355, 2358, 615, 616, 617

• Kits include skid shoes and hardware

• OE parts

• Painted, ready to install

• Available as a pair, five-pack, six-pack, and eight-pack.

Part no. 8727018 - 2 pack ...........................................................................................$46.63

application: 1409, 1410, 1412, 1431, 1432, 1441, 2331, 2332, 2355, 2358, 615, 616, 617

• Kits include rock guards and mounting hardware

• OE components

• Heavy-duty cast guard designed to protect the module on the mower

• Available as a pair, five-pack, six-pack, and eight-pack.

Part no. 8727019 - 2 pack ...........................................................................................$36.05

aDJuSTaBlE HolD Down KiT PaiR (caRDED)

application: 451, 456, 472 Mowers; 72C, 74C Grain Header; 2200H, 2300H Windrowers; 488, 499, 1496, 1499 Mower Conditioners; 12HS, 14HS, 16HS, 18HS Haybine headers

Part no. 87297024 .................$26.89

RuBBER laTcH KiTPart no. 87298525 .....................$8.63

DE-cluTcH cam SHaFT BEaRinG KiTPart no. 87298522 .................$56.27

REEl cam BEaRinG (PaiR) KiT wiTH HaRDwaRE (caRDED)

application: 1100, 1112, 1114, 1116, 1118, 114, 220H, 2300H, 903, 905, 907, 909, 912 Windrowers, 1465, 1469, 1475, 1495, 1496, 1499, 460, 461, 467, 469, 472, 474, 477, 478, 479, 488, 489, 490, 492, 495, 499 Mower Conditioners; 12HS, 14HS, 16HS, 18HS Haybine Headers

Part no. 87297023 ......................$49.43

com

bine

s



GRain PlaTFoRm KiTSnew Holland Sta-Sharp™ and Super Sta-Sharp™ Sections have a special design root serration to prevent excessive wear across the top. Complete selection of Sta-Sharp and Super Sta-Sharp sections available.

• Induction hardened for extra-long wear• Top-serrated sections have self sharpening feature• Available for 3'' and 1-1/2'' knife systems• High-carbon 1080 steel

Knife Sections - 86561692

comBinE KniFE SElEcTion - STa-SHaRP™ SEcTionS

header Size 1-1/2'' oNe Piece Price15' 1970502C5 $378.35

16.5' 1970503C5 $410.84

17.5' 1970504C6 $364.48

20' 1970400C6 $366.49

22.5' 1970442C5 $558.93

25' 1970402C5 $626.60

30' 1970404C5 $709.53

KnivESaPPLicatioN deScriPtioN Part No. Price

72C-74C LH 20 FT 86900832 $332.36

72C-74C RH 20 FT 86900833 $335.96

72C-74C LH 25 FT 86900834 $402.00

72C-74C RH 25 FT 86900835 $393.39

72C-74C LH 30 FT 86977981 $417.79

72C-74C RH 30 FT 86977982 $419.23

SEcTionSaPPLicatioN deScriPtioN Part No. Price

72C-74C 3'' END - RH FINE 14 SER/INCH 86616529 $2.37

72C-74C 3'' END - LH FINE 14 SER/INCH 86616528 $2.37

72C-74C 3'' MAIN - FINE 14 SER/INCH 86616527 $1.81

72C-74C 3'' END - RH COARSE 10 SER/INCH 86616693 $2.20

72C-74C 3'' END - LH COARSE 10 SER/INCH 86616692 $2.27

72C-74C 3'' MAIN - COARSE 10 SER/INCH 8661669 $1.80

comBinE KniFE SElEcTion - SuPER STa-SHaRP™ SEcTionS

header Size 3'' SPLit Price16.5' 371617A2 $358.62

17.5' 371618A2 $397.22

20' 371619A2 $464.15

22.5' 371620A2 $511.70

25' 371621A3 $518.26

30' 371622A3 $611.48

BacK HaRDEnED SEcTionSThe back edge of most New Holland sections are hardened to the same Rockwell hardness as the mating surface of the New Holland guard or wear plate to provide:

• Superior durability

• Assures an even wear rate between the two mating surface and eliminates the need for frequent adjustments

• Increases section longevity at mating surfaces

• New Holland sections are made from high carbon steel with induction-hardened cutting edge for superior wear line

• The center of the New Holland section is very ductile for improved toughness

• Top serrated sections are self-sharpening for a cleaner, smoother cut

• The back edge of most New Holland sections are hardened for superior durability


BacK HaRDEnED SEcTionSThe back edge of most New Holland sections are hardened to the same Rockwell hardness as the mating surface of the New Holland guard or wear plate to provide:

• Superior durability

• Assures an even wear rate between the two mating surface and eliminates the need for frequent adjustments

• Increases section longevity at mating surfaces

*See store for details. For commercial use only. Customer participation subject to credit qualificationand approval by CNH Capital America LLC. See your Titan Machinery Representative for details and eligibility requirements. Down payment may be required. Not all customers or applicants may qualify for this rate or term. CNH Capital America LLC standard terms and conditions will apply.

oil &

Filters

A Winning CombinAtion

KnoCK-out PerformAnCeThe combination of New Holland Ambra™ Mastergold™ Engine Oil and New Holland Oil Filters provides protection and endurance that knocks-out the competition. New Holland Ambra Mastergold Engine Oil is a premium, high-performance engine oil specifically designed and tested to provide maximum protection, performance, and long life in heavy-duty, high-temperature operation. By saving a few pennies with lesser quality lubrication and filtration, you’ll risk profit-eating downtime and expensive repairs. It costs you very little more to use the best; it could cost you greatly to use the rest.

• Provides superior protection against wear and corrosion• Keeps engines exceptionally clean, minimizes deposits and maintains excellent soot-control• Allows excellent cold-weather starting and operating performance

STOP IN TODAY FOR MORE INFORMATION.

© 2009 CnH America LLC. All rights reserved. CnH and new Holland are registered trademarks of CnH America LLC. www.newholland.com

STOP IN TODAY FOR MORE INFORMATION.

*See store for details. For commercial use only. Customer participation subject to credit qualificationand approval by CNH Capital America LLC. See your Titan Machinery Representative for details and eligibility requirements. Down payment may be required. Not all customers or applicants may qualify for this rate or term. CNH Capital America LLC standard t

finance Today with your Titan Access Account!

No interest, No Payments for 90 days on purchase of $750 or more of genuine

New Holland parts and service when you use your Titan Access Account.

com

bine

s



GRain PlaTFoRm KiTS

HEaDER auGER anD FinGER KiTSThe Auger Finger is tougher, stronger, more wear resistant, and now has a roll pin installed to capture the Auger Finger safely in the auger tube.

•SuRFacE HaRDnESS - The surface hardness is increased to provide more wear life.

•coRE HaRDnESS - The core hardness is increased for improved toughness to better resist breaking or bending.

•Roll-Pin RETainER - A roll-pin is positioned between the finger guide and breakpoint to capture any broken finger inside the auger tube. Any broken finger can easily be removed at the operator's convenience.

iNstAlled PiN - reAl lAbor sAver!

STEEl vS. Poly/FiBERGlaSS FinGERSteel is harder than Poly/Fiberglass and will provide substantially more wear-life. Tougher, stronger, harder, longer lasting, and with the retainer system the New Holland steel auger finger is the better choice.

KiT SElEcTionaPPLicatioN deScriPtioN Part No. Price73/74C SERIES HEADERS - BPINPNL017801 AUGER FINGER COMPLETE REPAIR KIT B96520 $558.64

73/74C SERIES HEADERS - BPINPNL017801 DELUXE AUGER FINGER KIT - ONE FINGER, HUB, GUIDE AND HARDWARE B96538 $19.30

73/74C SERIES HEADERS - BPINPNL017801 AUGER FINGER KIT - TWO FINGERS, GUIDES AND HARDWARE B96539 $32.15

74C SERIES HEADERS - PNL017801 & AFTER AUGER FINGER COMPLETE REPAIR KIT - 30' HEADER 87298864 $599.01



74C SERIES HEADERS - PNL017801 & AFTER AUGER FINGER KIT - TWO FINGERS, GUIDES AND HARDWARE 87298867 $40.95

74C SERIES HEADERS - PNL017801 & AFTER DELUXE AUGER FINGER KIT - ONE FINGER, HUB, GUIDE AND HARDWARE 87298954 $24.95

auGER FinGER KiT

Part no. B96539......................$32.15

DRivE SHaFT BEaRinG KiT

application: 72C and 74C Headers

• Handy Service Pack

• Kit includes bearing, flange, and mounting hardware

Part no. 87297938nH

auGER FinGER comPlETE REPaiR KiT

Part no. B96520.....................................................$558.64

KniFE DRivE aSSEmBly

application: 71C, 72C, 73C and 74C Headers

For minimum downtime and new performance - choose the complete replacement

Part no. 850901

com

bines



GuaRDS

culTivaToR SwEEPSchisel Plow Sweep

Size thicKNeSS hoLe SPaciNg SteM aNgLe Part No. Price7.5'' 1/4'' 2-1/4'' to 2-1/2'' 50° 1547097C2 $8.19

9.0'' 1/4'' 2-1/4'' to 2-1/2'' 50° 1547098C2 $8.86

SweepsSize Part No. Price

7.5'' KNOCK ON 380434A1 $11.36

12'' 133767A1 $15.53

HEavy-DuTy HEaT TREaTED GuaRDSThe performance and durability are in the superior double heat treatment of critical wear surfaces.

• New Holland employs high industry standards using a special heat treatment process on the back bar to reduce wear between the guard and the section.

• New Holland applies an additional induction-hardening process to the ledger areas to provide a longer wear-sharp surface for more efficient cutting. These ledger areas are also wider for additional service life.

Today's machines have increased cutting demands. Made for durability and longer service life, New Holland guards provide top performance in all harvest conditions.

GRain HEaDER GuaRDS• Kits include guards, hold down clips, shims, and hardware

• Handy service 4-pack to repair two-foot sections or 2-pack to repair one-foot sections

• Kits for 3'' Systems

• Kits with double heat-treated guard for longer wear-life and improved toughness

GUARD KITS - 2-PACK - 3'' SYSTEM DOUBLE HEAT TREATED GUARD

Part No. deScriPtioN87298212 KIT WITH ADJUSTABLE HOLD DOWN CLIP

87297170 ADJUSTABLE HOLD DOWN CLIP

GUARD KITS - 4-PACK - 3'' SYSTEM DOUBLE HEAT TREATED GUARD

Part No. deScriPtioN87298213 KIT WITH ADJUSTABLE HOLD DOWN CLIP

Part No. deScriPtioN87442329 END GUARD - 3'' SYSTEM

87045432 TRIPLE GUARD - 3'' SYSTEM

87442324 MAIN GUARD - 3'' SYSTEM

87015708 MAIN GUARD - 1-1/2'' SYSTEM

87015706 END GUARD - 1-1/2'' SYSTEM

9826150 MAIN HOLD DOWN CLIP - 1-1/2'' SYSTEM


Pre

cisi

on F

arm

ing

finance Today with your

Titan Access Account!No interest, No Payments for 90 days on purchase of $750 or more of genuine

New Holland parts and service when you use your Titan Access Account.




Precision Farm

ing

THE PRECISION TO LEADWITH SUPPORT TO FOLLOW.

FM-750™

Introducing the FM-750™ Display: Now Available to OrderThe FM-750™ display is equipped with touchscreen technology, Field-IQ™ crop input control system compatability, and an integrated GNSS receiver that supports both GPS and GLONASS satellite constellations for sub-meter to RTK-level accuracy.In addition, the FM-750™ display works with both the EZ-Steer® assisted steering system and Autopilot™ automated steering system. The FM-750™ display the best value in the industry.

Key features

• An 8" touchscreen with an all new intuitive user experience

• Attachable RTK radio

• Dual external video input

• Built-in 220 channel GNSS receiver that isGPS and GLONASS capable

• Supports Field-IQ crop input control systems for spraying,spreading, strip till and planting

• Manual and automated guidance with the EZ-Steer® assistedsteering system and Autopilot™ automated steering system

• Feature mapping and record keeping capabilities

Ordering information

The FM-750™ display and accessories are available for ordering immediately:

Part Number Description

ZTN94000-60 FM-750™ display—DGPS level with L1/L2/G1/G2 AG25 antenna (WAAS, EGNOS, Autonomous)

ZTN78750-90 FM-750™ attachable 900 MHz radio kit

ZTN78750-44 FM-750™ attachable 430-450 MHz radio kit

ZTN78750-46 FM-750™ attachable 450-470 MHz radio kit

* One year parts and labor warranty when installed by a Case IH dealer.

© 2007 CNH America LLC. All rights reserved. Case IH is a registered trademark of CNH America LLC.

If your machine’s engine doesn’t have the pull it used to because it’s worn out…RUN WITH A REMAN ENGINE from Case IH. Reduce down time with a lower cost alternative than a new engine, with the same warranty as new.*

Ask us today about our full range of remanufactured parts to keep you up and running.

RUN WITH REMAN

DEALER NAMEADDRESS

(000) 000-0000

CNH ORIGINAL PARTS REMAN ENGINES

looks like new. works like new.• A used engine can be stripped from a salvage yard and sold “as is”.

• When an engine is rebuilt, only the component that has failed is replaced or fixed.

• Reman engines are tested against OEM specifications and cores are updated with the latest changes and specifications.

• Reman engines carry a “same as new” or “better-than-new” warranty that equals or exceeds the OEM warranty to assure worry-free ownership.

NEW HOLLAND REMAN ENGINES ARE THE SMART CHOICE

LOOkS LIkE NEW. WORkS LIkE NEW.

VISIT US TODAY TO SEE IF REMAN IS RIGHT FOR YOU.

©2009 CNH America LLC. All rights reserved. New Holland and CNH are registered trademarks of CNH America LLC. Printed in U.S.A.


Make the Most of your

PURCHASINGPOWER

APPLY FOR YOUR TITAN ACCESS ACCOUNT TODAY!YOUR TITAN ACCESS ACCOUNT PROVIDES:

• A dedicated line of credit• No annual fee• No interest charged if the balance is

paid in full every month• Minimum 25-day grace period• Flexible repayment terms• Easy-to-read monthly statements• Periodic special promotions




1

2

3

5

6

4

new

Holland B

atteriesnew Holland Premium Heavy Duty Batteriesare the toughest you can buy!The value in batteries is more than skin deep. Though they all look similar on the outside, there are substantial differences in design, construction and materials.

For farm and construction equipment, you want a premium heavy-duty battery that is built to handle tough, off-road conditions. The number one killer of off-road batteries is vibration and New Holland Premium Heavy Duty batteries are built to take a pounding! New Holland Premium Heavy Duty batteries are designed to better handle the vibration and jolts that can literally knock the life out of automotive batteries.

Flame arrester vent lug allows gas to escape, but keeps external flames or sparks from entering the battery.

Superior intercell connectors prevent cell-to-cell leakage on steep grades to ensure reliable battery operation.

Special alloy grids retain a charge longer and accept it quicker – critical for off-road equipment that typically sits unused for long periods of time.

Computerized radial grids ensure the shortest, most direct flow to the terminal – for quick starting and recharging.

Envelope separations prevent grid-to-grid contact. promoting longer battery life.

Epoxy anchoring reduces grid plate vibration and short-circuiting, holding much better than commonly used hot-melt glues.

1 4

2 5

3 6

90

29

80

NORTH DAKOTAMINNESOTA

SOUTH DAKOTA

NEBRASKA

IOWAOskaloosa

Pella

Iowa FallsWaverly

Des Moines

Green�eld

Avoca

Kingsley

CherokeeLe Mars

Elbow LakeFergus Falls

TM WahpetonRI WahpetonKulm

LaMoureLisbon

Lidgerwood

Twin Cities

Aberdeen (HC Clark Imp)

9

9

WISCONSIN

Hastings

Redwood Falls

Grand IslandKearney

Lexington

Tri-State Equipment

North Platte

Holdrege

CenterPoint

GrundyCenter

39

39

Roseau

Thief River Falls

Grand ForksCrookston

Ada

Anthon

Pipestone

Graceville

Moorhead

Arthur

Mayville

Casselton

Marshall

Wishek

Jamestown

Aberdeen

Milbank

Britton

WatertownRed�eld

HuronMiller

Albert Lea

Highmore

Kintyre

Pierre

MONT

Winger

Mandan (Twin City Imp)

OUTLET STORE

CASE IH AG

CASE CE

NEW HOLLAND CE

NEW HOLLAND AG

IOWA Anthon712-373-5231

AvocA 712-343-6351

BlAirstown 319-454-6281

center point 319-849-3889

cherokee 712-225-5500

Greenfield 641-743-6113

Grundy center 319-824-3803

iowA fAlls 641-648-4231

kinGsley 712-378-3731

le MArs 712-546-8838

oskAloosA 641-673-7102

pellA 641-628-2131

wAverly 319-352-5872

MINNESOtAAdA 218-784-2321

AlBert leA 507-373-9114

crookston 218-281-4668

elBow lAke 218-685-4467

ferGus fAlls 218-736-5496

GrAceville 320-748-7277

MArshAll 507-532-5783

MoorheAd 218-287-8010

pipestone 507-825-5155

redwood fAlls 507-637-2978

roseAu 218-463-1781

thief river fAlls 218-681-1423

winGer 218-938-4131

NEBRASKA fAirBAnks int GrAnd islAnd 308-382-4781

fAirBAnks int hAstinGs 402-463-0544

fAirBAnks int holdreGe 308-995-4448

fAirBAnks int keArney 308-237-3128

fAirBAnks int lexinGton 308-324-5553

fAirBAnks int north plAtte 308-532-6571

NORtH DAKOtAArthur701-967-8318

cAsselton 701-347-4671

GrAnd forks 701-775-8111

JAMestown 701-252-8200

kintyre 701-332-6612

kulM 701-647-2442

lAMoure 701-883-5286

lidGerwood 701-538-4571

lisBon 701-683-4000

MAyville 701-788-3900

twin city iMp MAndAn 701-663-7505

richlAnd iMp wAhpeton 7019642-9266

wAhpeton 701-642-8424

wishek 701-452-2262

SOUtH DAKOtAABerdeen 605-225-0505

Britton 605-448-2277

hc clArk iMp ABerdeen 605-225-8170

hiGhMore 605-852-2217

huron 604-352-8554

MilBAnk 605-432-4576

Miller 605-853-3033

pierre 605-224-9247

redfield 605-472-0810

tri-stAte eQ sioux fAlls 605-336-6224

wAtertown 605-886-5741

MONTMONTMONTMONTMONTMONT

Check at your

local

Titan Machinery

Store

for all the details

PreSortedStaNdardUS Postage

PaidFargo, ND

Permit No. 54

titan new holland summer 2011 parts plus

Documents