titan profile - silhouette optical labsilhouettelab.com/tech/5406 - titan profile technical... ·...
TRANSCRIPT
-
Titan Profile
-
Inclination
2. Cover hinge closely and adjust inclination into requested direction on titanium side part
1. Hold lens fixation firmly
Inclinate here
-
REDUCE ENLARGE
Temple Opening
-
1. Hold lens fixation firmly 2. Close temple by 45°
Temple Disassembly
3. Press cylinder out of SNAP-hinge. Apply pressure right beside hinge.
4. ATTENTION: Never bend temple
-
Temple Assembly
1
2
3
4
Turn temple forward by 180°
Bring temple into correct position again
-
Curve temple in large movements. Do not bend!
Temple Curving
Slide Number 1InclinationTemple OpeningTemple DisassemblyTemple AssemblySlide Number 6