titanium implant systems for cranio-maxillo-facial … · 2019-11-08 · 2 contact...
TRANSCRIPT
MEDICAL ADVANCED TECHNOLOGY
MEDICAL ADVANCED TECHNOLOGY
MAT GmbH & Co.KGFriedrich-Wöhler Straße 1078576 Emmingen-Liptingen, GermanyPhone: +49 (0)7465 909 188 · Fax : +49 (0)7465 909 024 www.mat-medical.com · [email protected]
TITANIUM IMPLANT SYSTEMS FOR CRANIO-MAXILLO-FACIAL OSTEOSYNTHESIS
2
ContactFriedrich-Wöhler-Straße 1078576 Emmingen, Germanyphone +49(0)74 65 / 909188Fax +49(0)74 65 / 909024
[email protected] for use under our Hompage:www.mat-medical.com
The Titanium-Plating-Systems feature five modular components for cranio-maxillo-facial osteosynthesis.The nomenclature of the systems as such is based on the diameter of the titanium screws being part of the individual sets.
Micro 1.2 - SystemTIN 1.6 - SystemMINI 2.0 - SystemMandibular Fractures 2.3 - SystemMandibular Reconstruction 2.7 - System
and a visual distinction by an individually assigned color code.
All implant systems are available as standarized sets or according to specific requirements in individual compositions. Combinations of diffrent implant systems (Combo - Systems), as well as „taylor made“ sets are manufactured individually according to your specifications.
The designated color code allows a clear and therfore unmistakable assignation „Implants - Twist - Drills - Instrumentation - Storage“.
GENERAL INFORMATION
TITANIUM IMPLANTAT SYSTEMS FOR CRANIO-MAXILLO-FACIAL OSTEOSYSTHESIS
CONTENTS COLORE CODE
MICRO System 1. 2 BLUE
TIN - System 1.6 GREEN
MINI - System 2.0 GOLD
Fracture mandibular 2.3 RED
Reconstruction mandibular 2.7 GOLD
Implant - and Instrument Trays
IMPORTANT NOTE!
Responsibility for the proper selection of patients, for adequat training and information, for ex-perience in the choice and placement of implants and the decision to leave or remove implants postoperatively rests with the physician.
Raw Material for Titanium Bone Screws: According to ISO Specification ISO 5832-3 Titanium Alloy Ti6AL4VRaw Material for Titanium Bone Plates: According to ISO Specification ISO 5832-2 Pure Titanium.
SEE MANUAL FOR USE NO. 4 PAGE 58!
3
SY
ST
EM
1.2
4
MICRO - BONE PLATES 1.2 SYSTEMPROFILE HEIGHT: 0.55 MM
Straight Plate
4 hole
01-10-000-04
Straight Plate
6 hole
01-10-000-06
Straight Plate
8 hole
01-10-000-08
Straight Plate
12 hole
01-10-000-12
Straight Plate
16 hole
01-10-000-16
Straight Plate
24 hole
01-10-000-24
L Plate L Plate
left right
01-10-030-01 01-10-030-02
L Plate L Plate
left right
01-10-034-01 01-10-034-02
T Plate T Plate
5 hole 5 hole
01-10-050-01 01-10-052-01
T Plate T Plate
6 hole 7 hole
01-10-052-02 01-10-050-02
Double T Plate Y Plate
6 hole 6 hole
01-10-058-01 01-10-060-01
Double Y Plate
6 hole
01-10-070-01
Double Y Plate
7 hole
01-10-070-02
Orbital Plate
8 hole
01-10-087-08
H Plate
9 hole
01-10-090-09
H Plate
14 hole
01-10-090-14
Quadro Plate
2 x 2 hole
01-10-120-04
5
MICRO - BONE PLATES 1.2 SYSTEMPROFILE HEIGHT: 0.55 MM
Quadro Plate
2 x 3 hole
01-10-120-06
Quadro Plate
2 x 4 hole
01-10-120-08
Quadro Plate
6 x 4 hole
01-10-120-24
Rectangular Plate
7 hole
01-10-130-04
Rectangular Plate
2 x 3 hole
01-10-130-06
Rectangular Plate
2 x 4 hole
01-10-130-08
Rectangular Plate
2 x 4 hole
01-10-132-08
Rectangular Plate
6 x 4 hole
01-10-130-24
Titan Mesh Titan Mesh
120 x 75 x 0,3 mm 120 x 75 x 0,6 mm
01-10-140-03 01-10-140-06
Titan Mesh Titan Mesh
120 x 75 x 0,1 mm 120 x 120 x 0,1 mm
01-10-146-01 01-10-147-01
6
MICRO - BONE SCREWS 1.2 SYSTEMSELFTAPPING, SELFHOLDING
Quadro - Drive - Screws ( 10/PK)1,2 mm
Art. - No. Description
01-10-500-03 1,2 x 3 mm
01-10-500-04 1,2 x 4 mm
01-10-500-05 1,2 x 5 mm
01-10-500-06 1,2 x 6 mm
01-10-500-07 1,2 x 7 mm
01-10-500-08 1,2 x 8 mm
01-10-500-09 1,2 x 9 mm
01-10-500-10 1,2 x 10 mm
01-10-500-11 1,2 x11 mm
01-10-500-12 1,2 x 12 mm
01-10-500-13 1,2 x 13 mm
01-10-502-03 1,4 x 3 mm
01-10-502-05 1,4 x 5 mm
Notfall - Schrauben / Emergency screws 1,4 mm ( 10/PK)
Cross - Drive - Screws ( 10/PK)1,2 mm
Art. - No. Description
01-10-510-03 1,2 x 3 mm
01-10-510-04 1,2 x 4 mm
01-10-510-05 1,2 x 5 mm
01-10-510-06 1,2 x 6 mm
01-10-510-07 1,2 x 7 mm
01-10-510-08 1,2 x 8 mm
01-10-510-09 1,2 x 9 mm
01-10-510-10 1,2 x 10 mm
01-10-510-11 1,2 x11 mm
01-10-510-12 1,2 x 12 mm
01-10-510-13 1,2 x 13 mm
01-10-512-03 1,4 x 3 mm
01-10-512-05 1,4 x 5 mm
TWIST DRILL1,0 x 30 mm5 mm Stopdental plug
01-10-852-05
TWIST DRILL1,0 x 34 mm8 mm Stopdental plug
01-10-852-08
TWIST DRILL1,0 x 50 mm3 mm StopStryker plug
01-10-850-03
dental plug 01-10-854-03
TWIST DRILL1,0 x 50 mm5 mm StopStryker plug
01-10-850-05
dental plug 01-10-854-05
TWIST DRILL1,0 x 50 mm8 mm StopStryker plug
01-10-850-08
dental plug 01-10-854-08
7
SCREW DRIVERremovable Blade
dental plug CROSS Drive01-10-804-10
SCREW DRIVERremovable Blade
dental plug QUADRO Drive01-10-810-15
HANDLE SCREWDRIVERdental plug
01-10-815-01
REPLACEMENT BLADEdental plug
CROSS Drive 01-10-804-18
BLADE CONTRA-ANGLEdental plug
CROSS Drive 01-10-810-12
BLADE CONTRA-ANGLEdental plug
QUADRO Drive 01-10-806-19
HOLDING DEVICE01-10-804-21
REPLACEMENT BLADEdental plug
QUADRO Drive 01-10-810-11
MICRO - BONE SCREWS 1.2 SYSTEMSELFTAPPING, SELFHOLDING
8
MICRO - BONE SCREWS 1.2 SYSTEMSELFTAPPING, SELFHOLDING
PLATE BENDING PLIER12,5 cm
01-10-820-12
ADERER MOD. BENDING PLIER
12,5 cm01-10-822-13
TC PLATE CUTTER11,0 cm
01-10-824-11
TC PLATE AND MESH SCISSORS
14,5 cm01-TC1-898-14
PLATE / SCREWHOLDING - FORCEPS / TITAN
15,5 cm01-12-822-18
9
INSTRUMENTATION 1.2 SYSTEM
COMBO IMPLANT1.2 System (empty)
01-10-800-00
VARIO IMPLANTS AND INSTRUMENT TRAY
for 1.2 System (empty)01-10-798-00
STERILIZING CONTAINER300 x 140 x 100 mm
C-441-100
INSTRUMENT TRAYfor 1.2 System / 1.6 System (empty)
01-11-802-01
10
11
SY
ST
EM
1.6
12
TIN - BONE PLATES 1.6 SYSTEMPROFILE HEIGHT: 0,55 MM
Straight Plate
4 hole
without stem
01-11-000-04
T Plate T Plate
6 hole 5 hole
01-11-050-01 01-11-050-05
Straight Plate
4 hole
6 mm stem
01-11-002-04
Straight Plate
4 hole
8 mm stem
01-11-004-04
Straight Plate
4 hole
10 mm stem
01-11-006-04
Straight Plate
6 hole
without stem
01-11-010-06
Straight Plate
6 hole
12 mm stem
01-11-014-06
Straight Plate
8 hole
without stem
01-11-020-08
Straight Plate
30 hole
without stem
01-11-020-30
Y Plate Y Plate
5 hole 5 hole
8 mm stem 12 mm stem
01-11-060-02 01-11-060-04
Double Y Plate Double Y Plate
7 hole 6 hole
without stem 8 mm stem
01-11-070-02 01-11-070-04
Straight Plate
18 hole
without stem
01-11-020-18
Straight Plate
16 hole
without stem
01-11-020-16
L Plate
left
6 mm stem
01-11-030-01
L Plate
right
6 mm stem
01-11-030-02
L Plate
left
8 mm stem
01-11-032-01
L Plate
right
8 mm stem
01-11-032-02
L Plate
left
10 mm stem
01-11-034-01
L Plate
right
10 mm stem
01-11-034-02
Y Plate
5 hole
without stem
01-11-060-01
Double Y Plate
6 hole
without stem
01-11-070-01
13
TIN - BONE PLATES 1.6 SYSTEMPROFILE HEIGHT: 0,55 MM
Orbital Plate
6 hole
01-11-087-06
Orbital Plate
8 hole
01-11-087-08
Orbital Plate
10 hole
01-11-087-10
12,5 mm
01-11-100-13
Burr Hole Plate
18,5 mm
01-11-100-18
22,0 mm
01-11-100-22
Neuro Plate
short
01-11-110-02
Neuro Plate
long
01-11-110-03
Quadro Plate
2 x 2 Hole
01-11-120-04
Quadro Plate
3 x 2 Hole
01-11-120-06
Quadro Plate
4 x 2 Hole
01-11-120-08
Quadro Plate
6 x 4 hole
01-11-120-24
Rectangular Plate
2 x 2 hole
01-11-130-04
Rectangular Plate
2 x 3 hole
01-11-130-06
Rectangular Plate
2 x 4 hole
01-11-130-08
Rectangular Plate
6 x 4 hole
01-11-130-24
14
Neuro - Sub -Temporale Plate
large
01-11-156-02
TIN - BONE PLATES 1.6 SYSTEMPROFILE HEIGHT: 0,55 MM
Titan Mesh Titan Mesh
120 x 75 x 0,3 mm 120 x 75 x 0,6 mm
01-11-140-03 01-11-140-06
Titan Mesh Titan Mesh
120 x 60 x 0,1 mm 120 x 120 x 0,1 mm
01-11-146-01 01-11-147-01
Neuro Gap Plate
small
01-11-150-01
Neuro Gap Plate
medium
01-11-150-02
Neuro Gap Plate
large
01-11-150-03
Neuro - Sub -Temporale Plate
small
01-11-156-01
15
PAULUS LE FORT PLATES
PAULUS LeFort I Plate links / left
Art. - No. Description
01-11-192-00 0 mm
01-11-192-02 2 mm
01-11-192-03 3 mm
01-11-192-04 4 mm
01-11-192-05 5 mm
01-11-192-06 6 mm
01-11-192-07 7 mm
01-11-192-08 8 mm
01-11-192-09 9 mm
01-11-192-10 10 mm
01-11-192-11 11 mm
01-11-192-12 12 mm
PAULUS LeFort I Plate rechts / right
Art. - No. Description
01-11-193-00 0 mm
01-11-193-02 2 mm
01-11-193-03 3 mm
01-11-193-04 4 mm
01-11-193-05 5 mm
01-11-193-06 6 mm
01-11-193-07 7 mm
01-11-193-08 8 mm
01-11-193-09 9 mm
01-11-193-10 10 mm
01-11-193-11 11 mm
01-11-193-12 12 mm
1.6 SYSTEM PROFILE HEIGHT: 0.6 mm
PAULUS LeFort I Plate links / left
Art. - No. Description
01-12-192-00 0 mm
01-12-192-02 2 mm
01-12-192-03 3 mm
01-12-192-04 4 mm
01-12-192-05 5 mm
01-12-192-06 6 mm
01-12-192-07 7 mm
01-12-192-08 8 mm
01-12-192-09 9 mm
01-12-192-10 10 mm
01-12-192-11 11 mm
01-12-192-12 12 mm
PAULUS LeFort I Plate rechts / right
Art. - No. Description
01-12-193-00 0 mm
01-12-193-02 2 mm
01-12-193-03 3 mm
01-12-193-04 4 mm
01-12-193-05 5 mm
01-12-193-06 6 mm
01-12-193-07 7 mm
01-12-193-08 8 mm
01-12-193-09 9 mm
01-12-193-10 10 mm
01-12-193-11 11 mm
01-12-193-12 12 mm
2.0 SYSTEM PROFILE HEIGHT: 1.0 mm
16
TIN - BONE - SCREWS 1.6 SYSTEMSELFTAPPING, SELFHOLDING
Quadro - Drive - Screw (10/PK)1,6 mm
Art. - No. Description
01-11-500-03 1,6 x 3 mm
01-11-500-04 1,6 x 4 mm
01-11-500-05 1,6 x 5 mm
01-11-500-06 1,6 x 6 mm
01-11-500-07 1,6 x 7 mm
01-11-500-08 1,6 x 8 mm
01-11-500-09 1,6 x 9 mm
01-11-500-11 1,6 x 11mm
01-11-500-13 1,6 x 13 mm
01-11-500-15 1,6 x 15 mm
01-11-502-05 1,9 x 5 mm
01-11-502-07 1,9 x 7 mm
Cross - Drive - Screw (10/PK)1,6 mm
Art. - No. Description
01-11-510-03 1,6 x 3 mm
01-11-510-04 1,6 x 4 mm
01-11-510-05 1,6 x 5 mm
01-11-510-06 1,6 x 6 mm
01-11-510-07 1,6 x 7 mm
01-11-510-08 1,6 x 8 mm
01-11-510-09 1,6 x 9 mm
01-11-510-11 1,6 x 11mm
01-11-510-13 1,6 x 13 mm
01-11-510-15 1,6 x 15 mm
01-11-512-05 1,9 x 5 mm
01-11-512-07 1,9 x 7 mm
Multi - Head Screw (10/PK)1,6 mm
Art. - No. Description
01-11-520-04 1,6 x 4 mm
01-11-520-05 1,6 x 5 mm
01-11-520-06 1,6 x 6 mm
01-11-520-07 1,6 x 7 mm
01-11-522-05 1,9 x 5 mm
01-11-522-07 1,9 x 7 mm
Notfall - Schrauben / Emergency screws 1,9 mm ( 10/PK)
Quadro - Drive (5/PK)
Art. - No. Description
01-11-506-03 1,6 x 3 mm
01-11-506-04 1,6 x 4 mm
01-11-506-05 1,6 x 5 mm
Cross - Drive (5/PK)
Art. - No. Description
01-11-516-03 1,6 x 3 mm
01-11-516-04 1,6 x 4 mm
01-11-516-05 1,6 x 5 mm
ESD - EASY - SELF - DRILLING - SCREWSELFTAPPING, SELFHOLDING
17
TWIST DRILL1,3 x 23 mm8 mm Stopdental plug
01-11-853-08
TIN - BONE - SCREWS 1.6 SYSTEMSELFTAPPING, SELFHOLDING
TWIST DRILL1,3 x 25 mm10 mm Stopdental plug
01-11-853-10
TWIST DRILL1,3 x 30 mm15 mm Stopdental plug
01-11-853-12
TWIST DRILL1,3 x 50 mm4 mm StopStryker plug
01-11-850-04
dental plug01-11-854-04
TWIST DRILL1,3 x 50 mm5 mm StopStryker plug
01-11-850-05
dental plug01-11-854-05
TWIST DRILL1,3 x 50 mm8 mm StopStryker plug
01-11-850-08
dental plug01-11-854-08
TWIST DRILL1,3 x 50 mm15 mm StopStryker plug
01-11-850-15
dental plug01-11-854-15
18
SCREWDRIVERRemovable Blade
dental plugCROSS DRIVE01-11-802-15
INSTRUMENTATION 1.6 SYSTEM
SCREWDRIVERRemovable Blade
dental plugQUADRO DRIVE
01-11-810-15
HANDLESCREWDRIVER
dental plug01-11-815-02
SCREWDRIVERRemovable Blade
dental plugCROSS DRIVE01-11-804-16
SCREWDRIVERRemovable Blade
dental plugQUADRO DRIVE
01-11-814-15
HANDLESCREWDRIVER
lightdental plug
01-11-815-03
19
REPLACEMENT blade
dental plugCROSS DRIVE01-11-802-23
INSTRUMENTATION 1.6 SYSTEM
REPLACEMENT blade
dental plugQUADRO DRIVE
01-11-810-17
HOLDING DEVICE01-11-804-21
bladeCONTRA - ANGLE
dental plugQUADRO DRIVE
01-11-806-19
bladeCONTRA - ANGLE
dental plugQUADRO DRIVE
01-11-810-19
PLATE BENDING PLIER
12,5 cm01-10-820-12
ADERER MOD.BENDING PLIER
12,5 cm01-11-822-13
TC PLATECUTTER11,0 cm
01-11-824-11
TC PLATE+ MESH14,5 cm
01-TC1-898-14
PLATE / SCREWHOLDING FORCEPS / TITAN
15,5 cm01-12-822-18
20
INSTRUMENTATION 1.6 SYSTEM
COMBO IMPLANT MKG1.6 System (empty)
01-11-800-00
VARIO IMPLANTS AND INSTRUMENT TRAY
for 1.6 System (empty)01-11-798-00
STERILIZING CONTAINER300 x 140 x 100 mm
C-451-100
INSTRUMENT TRAYfor 1.2 System / 1.6 System (empty)
01-11-802-01
COMBO IMPLANT NEURO1.6 System (empty)
01-11-800-01
21
SY
ST
EM
2.0
22
MINI - BONE PLATES 2.0 SYSTEM
Straight Plate
4 hole
without stem
M: 01-12-000-04
L: 01-12-200-04
M - MINI PLATE ( 1.0 MM THICKNESS )L - LOW PLATE ( 0.6 MM THICKNESS )
Straight Plate
4 hole
short stem
M: 01-12-002-04
L: 01-12-202-04
Straight Plate
4 hole
long stem
M: 01-12-006-04
L: 01-12-206-04
Straight Plate
6 hole
without stem
M: 01-12-000-06
L: 01-12-200-06
Straight Plate
6 hole
long stem
M: 01-12-004-06
L: 01-12-204-06
Straight Plate
8 hole
without stem
M: 01-12-000-08
L: 01-12-200-08
Straight Plate
16 hole
without stem
M: 01-12-000-16
L: 01-12-200-16
Straight Plate
20 hole
without stem
01-12-000-20
Straight Plate
40 hole
without stem
01-12-000-40
L Plate L Plate
left right
without stem without stem
M: 01-12-030-01 M: 01-12-030-02
L: 01-12-230-01 L: 01-12-230-02
L Plate L Plate
left right
short stem short stem
M: 01-12-032-01 M: 01-12-032-02
L: 01-12-232-01 L: 01-12-232-02
L Plate L Plate
left right
medium stem medium stem
M: 01-12-034-01 M: 01-12-034-02
L: 01-12-234-01 L: 01-12-234-02
L Plate L Plate
left right
long stem long stem
M: 01-12-036-01 M: 01-12-036-02
L Plate L Plate
left right
short stem short stem
M: 01-12-037-01 M: 01-12-037-02
L: 01-12-237-01 L: 01-12-237-02
110° 110°
L Plate L Plate
left right
medium stem medium stem
M: 01-12-038-01 M: 01-12-038-02
L: 01-12-238-01 L: 01-12-238-02
110° 110°
23
MINI - BONE PLATES 2.0 SYSTEM
T Plate
6 hole
without stem
M: 01-12-050-01
L: 01-12-250-01
T Plate
5 hole
long stem
M: 01-12-052-02
L: 01-12-252-02
T Plate
5 hole
long stem
M: 01-12-056-01
L: 01-12-256-01
T Plate
5 hole
long stem
M: 01-12-056-02
L: 01-12-256-02
Y Plate
5 hole
without stem
M: 01-12-060-01
L: 01-12-260-01
Y Plate
5 hole
long stem
M: 01-12-060-04
L: 01-12-260-04
Double Y Plate
6 hole
without stem
M: 01-12-070-01
L: 01-12-270-01
Double Y Plate
6 hole
long stem
M: 01-12-070-02
L: 01-12-270-02
Double Y Plate
7 hole
without stem
M: 01-12-070-06
L: 01-12-270-06
Double T Plate
4 hole
long stem
01-12-276-04
Double T Plate
6 hole
without stem
01-12-278-04
24
MINI - BONE PLATES 2.0 SYSTEM
M - MINI PLATE ( 1.0 MM THICKNESS )L - LOW PLATE ( 0.6 MM THICKNESS )
Orbital Plate
6 hole
M: 01-12-087-06
L: 01-12-287-06
Orbital Plate
8 hole
M: 01-12-087-08
L: 01-12-287-08
Orbital Plate
10 hole
M: 01-12-087-10
L: 01-12-287-10
Z Plate Z Plate
regular regular
01-12-282-01 01-12-282-02
Z Plate Z Plate
long long
01-12-282-03 01-12-282-04
25
H Plate
12 hole
L: 01-12-288-12
Burr Hole Plate
12,5 hole
01-12-100-13
Burr Hole Plate
18,5 hole
01-12-100-18
PAULUS CHIN PLATE
Cat. - No. Thickness L Thickness Cat. - No.
01-12-190-02 0,6 mm 2 mm 1,0 mm 01-12-191-02
01-12-190-04 0,6 mm 4 mm 1,0 mm 01-12-191-04
01-12-190-06 0,6 mm 6 mm 1,0 mm 01-12-191-06
01-12-190-08 0,6 mm 8 mm 1,0 mm 01-12-191-08
01-12-190-10 0,6 mm 10 mm 1,0 mm 01-12-191-10
01-12-190-12 0,6 mm 12 mm 1,0 mm 01-12-191-12
01-12-190-14 0,6 mm 14 mm 1,0 mm 01-12-191-14
MINI - BONE PLATES 2.0 SYSTEM
26
MINI - BONE PLATES 2.0 SYSTEM
Straight Plate
2 hole
01-12-110-02
PROFILE HEIGHT: 0.75 MM
Straight Plate
4 hole
with short stem
01-12-302-04
Straight Plate
4 hole
with long stem
01-12-306-04
Straight Plate
30 hole
without stem
01-12-300-30
L Plate L Plate
left right
5 hole 5 hole
01-12-334-11 01-12-334-12
L Plate L Plate
left right
7 hole 7 hole
01-12-334-21 01-12-334-22
L Plate L Plate
left right
9 hole 9 hole
01-12-334-31 01-12-334-32
T Plate
4 hole
01-12-350-04
T Plate
8 hole
01-12-350-08
Y Plate
5 hole
01-12-360-05
Y Plate
8 hole
01-12-360-08
Double Y Plate
8 hole
01-12-370-08
X Plate
4 hole
01-12-374-04
Orbital Plate
6 hole
01-12-387-06
Orbital Plate
8 hole
01-12-387-08
Orbital Plate
10 hole
01-12-387-10
Orbital Plate
12 hole
01-12-387-12
27
MINI - BONE PLATES 2.0 SYSTEM
M - MINI PLATE ( 1.0 MM THICKNESS )L - LOW PLATE ( 0.6 MM THICKNESS )
Quadro Plate
2 x 2 hole
M: 01-12-120-04
L: 01-12-320-04
Quadro Plate
3 x 2 hole
M: 01-12-120-06
L: 01-12-320-06
Quadro Plate
4 x 2 hole
M: 01-12-120-08
L: 01-12-320-08
Quadro Plate
4 x 2 hole
M: 01-12-126-08
L: 01-12-326-08
Rectangular Plate
2 x 2 hole
M: 01-12-130-04
L: 01-12-330-04
Rectangular Plate
3 x 2 hole
M: 01-12-130-06
L: 01-12-330-06
Quadro Plate
4 x 4 hole
M: 01-12-120-16
L: 01-12-320-16
Quadro Plate
6 x 4 hole
M: 01-12-120-24
L: 01-12-320-24
Rectangular Plate
4 x 4 hole
M: 01-12-130-16
L: 01-12-330-16
Rectangular Plate
6 x 4 hole
M: 01-12-130-24
L: 01-12-330-24
Titan Mesh
224 x 77 x 0,55 mm
01-12-140-06
28
PAULUS LE FORT I PLATTES 2.0 SYSTEM
PAULUS LeFort I Plate links / left
Art. - No. Description
01-11-192-00 0 mm
01-11-192-02 2 mm
01-11-192-03 3 mm
01-11-192-04 4 mm
01-11-192-05 5 mm
01-11-192-06 6 mm
01-11-192-07 7 mm
01-11-192-08 8 mm
01-11-192-09 9 mm
01-11-192-10 10 mm
01-11-192-11 11 mm
01-11-192-12 12 mm
PAULUS LeFort I Plate rechts / right
Art. - No. Description
01-11-193-00 0 mm
01-11-193-02 2 mm
01-11-193-03 3 mm
01-11-193-04 4 mm
01-11-193-05 5 mm
01-11-193-06 6 mm
01-11-193-07 7 mm
01-11-193-08 8 mm
01-11-193-09 9 mm
01-11-193-10 10 mm
01-11-193-11 11 mm
01-11-193-12 12 mm
1.6 SYSTEM PROFILE H1EIGHT: 0.6 mm
PAULUS LeFort I Plate links / left
Art. - No. Description
01-12-192-00 0 mm
01-12-192-02 2 mm
01-12-192-03 3 mm
01-12-192-04 4 mm
01-12-192-05 5 mm
01-12-192-06 6 mm
01-12-192-07 7 mm
01-12-192-08 8 mm
01-12-192-09 9 mm
01-12-192-10 10 mm
01-12-192-11 11 mm
01-12-192-12 12 mm
PAULUS LeFort I Plate rechts / right
Art. - No. Description
01-12-193-00 0 mm
01-12-193-02 2 mm
01-12-193-03 3 mm
01-12-193-04 4 mm
01-12-193-05 5 mm
01-12-193-06 6 mm
01-12-193-07 7 mm
01-12-193-08 8 mm
01-12-193-09 9 mm
01-12-193-10 10 mm
01-12-193-11 11 mm
01-12-193-12 12 mm
2.0 SYSTEM PROFILE HEIGHT: 1.0 mm
29
MINI - BONE SCREWS 2.0 SYSTEMSELFTAPPING, SELFHOLDING
Quadro - Drive - Screws ( 10/PK)2,0 mm
Art. - No. Description
01-12-500-04 2,0 x 4 mm
01-12-500-05 2,0 x 5 mm
01-12-500-07 2,0 x 7 mm
01-12-500-09 2,0 x 9 mm
01-12-500-11 2,0 x 11 mm
01-12-500-13 2,0 x 13 mm
01-12-500-15 2,0 x 15 mm
01-12-500-17 2,0 x 17 mm
01-12-502-05 2,3 x 5 mm
01-12-502-07 2,3 x 7 mm
01-12-502-09 2,3 x 9 mm
Notfall - Schrauben / Emergency screws 2,3 mm ( 10/PK)
Cross - Drive - Screws ( 10/PK)2,0 mm
Art. - No. Description
01-12-510-04 2,0 x 4 mm
01-12-510-05 2,0 x 5 mm
01-12-510-07 2,0 x 7 mm
01-12-510-09 2,0 x 9 mm
01-12-510-11 2,0 x11 mm
01-12-510-13 2,0 x 13 mm
01-12-510-15 2,0 x 15 mm
01-12-510-17 2,0 x 17 mm
01-12-510-19 2,0 x 19 mm
01-12-510-20 2,0 x 20 mm
01-12-510-21 2,0 x 21 mm
01-12-510-22 2,0 x 22 mm
01-12-512-05 2,3 x 5 mm
01-12-512-07 2,3 x 7 mm
01-12-512-09 2,3 x 9 mm
Quadro - Drive (5/PK)
Art. - No. Description
01-12-506-04 2,0 x 4 mm
01-12-506-05 2,0 x 5 mm
01-12-506-07 2,0 x 7 mm
Cross - Drive (5/PK)
Art. - No. Description
01-12-516-04 2,0 x 4 mm
01-12-516-05 2,0 x 5 mm
01-12-516-07 2,0 x 7 mm
ESD - EASY - SELF - DRILLING - SCREWSELFTAPPING, SELFHOLDING
30
TWIST DRILL1,5 x 20 mm7 mm Stopdental plug
01-12-854-07
TWIST DRILL1,5 x 33 mm20 mm Stopdental plug
01-12-854-20
TWIST DRILL1,5 x 50 mm5 mm StopStryker plug
01-12-850-05
TWIST DRILL1,5 x 50 mm7 mm StopStryker plug
01-12-850-07
TWIST DRILL1,5 x 50 mm10 mm StopStryker plug
01-12-850-10
TWIST DRILL1,5 x 50 mm20 mm StopStryker plug
01-12-852-50
TWIST DRILL1,5 x 105 mm20 mm StopStryker plug
01-12-852-90
MINI - BONE SCREWS 2.0 SYSTEMSELFTAPPING, SELFHOLDING
31
INSTRUMENTATION 2.0 SYSTEM
SCREWDRIVER removable blade
CROSS Drive01-12-802-20
SCREWDRIVER removable blade
CROSS Drive01-12-804-20
BLADE CROSS Drive01-12-802-21
SCREWDRIVER removable bladeQUADRO Drive01-12-810-20
SCREWDRIVER removable bladeQUADRO Drive01-12-814-20
BLADE removable bladeQUADRO Drive01-12-810-21
HANDLEremovable
01-12-815-01
HANDLE01-12-815-02
32
INSTRUMENTATION 2.0 SYSTEM
SCREWDRIVER removable blade
dental plugCROSS Drive01-12-804-22
SCREWDRIVER removable blade
dental plugQUADRO Drive01-12-814-22
HANDLE removabledental plug
01-12-815-03
BLADE dental plug
CROSS Drive01-12-802-22
BLADE dental plug
QUADRO Drive01-12-810-22
HOLDING DEVICE 01-12-816-22
BLADE Contra Angledental plug
CROSS Drive01-12-806-19
33
INSTRUMENTATION 2.0 SYSTEM
PLATE BENDING PLIER
12,5 cm01-10-820-12
ADERER MOD.BENDING PLIER
12,5 cm01-12-822-13
PLATE SCREWHOLDING FORCEPS / TITAN
15,5 cm01-12-822-18
DEPTHGAUGE21,5 cm
01-12-830-21
HANDLE FOR TRANSBUCCAL
01-12-840-01
TRANSBUCCAL DRILLINGguide for screwdriver
without holding device, complete01-12-840-00
TROCAR01-12-840-02
DRILL GUIDE01-12-840-03
CHEEK RETRAKTOR01-12-840-04
34
PLATE CUTTER TC18,0 cm
01-12-844-18
INSTRUMENTATION 2.0 SYSTEM
35
MINI COMBO IMPLANT2.0 System (empty)
01-12-800-02
VARIO VARIO Implant and Instrument Tray
for 2.0 System (empty)01-12-798-00
INSTRUMENT TRAYfor 2.0 System (empty)
01-12-802-01
INSTRUMENT TRAYfor 3 Systems
1.2 / 1.6 / 2.0 (empty)01-12-802-03
STERILIZING CONTAINER285 x 280 x 150
C-321-150
INSTRUMENTATION 2.0 SYSTEM
36
37
SY
ST
EM
2.3
38
FRACTURE 2.3 SYSTEMPROFILE HEIGHT: 1.5 MM
4 hole plate
short stem
01-13-000-04
4 hole plate
medium stem
01-13-002-04
4 hole plate
long stem
01-13-004-04
6 hole plate
short stem
01-13-000-06
6 hole plate
medium stem
01-13-002-06
6 hole plate
long stem
01-13-004-06
8 hole plate
medium stem
01-13-002-08
14 hole plate
without stem
01-13-000-14
4 hole plate
C - shape
medium stem
01-13-021-04
Mandibular angle plate
6 hole
01-13-031-06
4 hole plate
for aveolar compression
short stem
01-13-010-04
4 hole plate
for aveolar compression
medium stem
01-13-012-04
39
FRACTUR SCREWS 2.3 SYSTEMSELFTAPPING, SELFHOLDING
2,3 mm HEX - Screws ( 5/PK)
Art. - No. Description
01-13-500-06 2,3 x 6 mm
01-13-500-08 2,3 x 8 mm
01-13-500-10 2,3 x 10 mm
01-13-500-12 2,3 x 12 mm
01-13-500-14 2,3 x 14 mm
01-13-500-16 2,3 x 16 mm
01-13-500-18 2,3 x 18 mm
01-13-500-20 2,3 x 20 mm
01-13-500-22 2,3 x 22 mm
2,7 mm HEX - Screws ( 5/PK)
Art. - No. Description
01-14-500-06 2,7 x 6 mm
01-14-500-08 2,7 x 8 mm
01-14-500-10 2,7 x 10 mm
01-14-500-12 2,7 x 12 mm
01-14-500-14 2,7 x 14 mm
01-14-500-16 2,7 x 16 mm
01-14-500-18 2,7 x 18 mm
01-14-500-20 2,7 x 20 mm
01-14-500-22 2,7 x 22 mm
TWIST DRILL1,8 x 98 mm
STRYKER ENDfor 2,3 mm Screws
01-13-850-98
TWIST DRILL1,8 x 95 mm
AO ENDfor 2,3 mm Screws
01-13-854-95
TWIST DRILL1,8 x 80 mm
DENTAL - ENDfor 2,3 mm Screws
01-13-856-80
TWIST DRILL2,0 x 105 mm
STRYKER - ENDfor 2,7 mm Screws
01-14-850-10
TWIST DRILL2,0 x 103 mm
AO - ENDfor 2,7 mm Screws
01-14-854-10
40
INTRUMENTATION 2.3 SYSTEM
SCREWDRIVERremovable blade
HEX DRIVE01-14-810-20
BLADEHEX DRIVE
2.3 / 2.7 System01-13-810-24
HANDLEremovable
01-12-815-01
DEPTH GAUGE01-12-830-21
PLATE BENDING PLIERwith pin
01-13-820-13
PLATE AND SCREWholding Forceps01-14-822-14
41
INTRUMENTATION 2.3 SYSTEM
HANDLE for transbuccal01-13-840-01
TRANSBUCCAL DRILLINGguide for screw driver
complete01-13-840-00
TROCAR01-13-840-02
DRILL GUIDE CENTRIC01-13-840-03
DRILL GUIDE EXCENTRIC01-13-840-05
CHEEK RETRAKTOR01-12-840-04
DRILL GUIDE DOUBLE ENDcentric / excentric
complete01-13-842-00
DRILL GUIDE INSERT CENTRIC
01-13-842-02
DRILL GUIDE INSERT EXCENTRIC
01-13-842-03
PLATE CUTTER TC22,5 cm
300-0007-434
42
INTRUMENTATION 2.3 SYSTEM
COMBO IMPLANT 2.3 System (empty)
01-13-800-00
INSTRUMENT TRAYfor 2.3 System (empty)
01-13-802-01
STERILIZING CONTAINER285 x 280 x 150 mm
C-331-150
43
SY
ST
EM
2.7
44
MANDIBULAR RECONSTRUCTION 2.7 SYSTEMPROFILE HEIGHT: 2.2 MM
8 hole plate
straight
01-14-000-08
11 hole plate
straight
01-14-000-11
14 hole plate
straight
01-14-000-14
17 hole plate
straight
01-14-000-17
45
Mandibular angle plate 4 + 11 hole
left
01-14-011-11
MANDIBULAR RECONSTRUCTION 2.7 SYSTEMPROFILE HEIGHT: 2.2 MM
Mandibular angle plate 4 + 11 hole
right
01-14-013-11
Mandibular angle plate 4 + 8 hole
left
01-14-011-08
Mandibular angle plate 4 + 8 hole
right
01-14-013-08
46
MANDIBULAR RECONSTRUCTION 2.7 SYSTEMPROFILE HEIGHT: 2.2 MM
Mandibular angle plate 4 + 14 hole
left
01-14-011-14
Mandibular angle plate 4 + 14 hole
right
01-14-013-14
Mandibular angle plate 6 + 14 hole
right
01-14-017-14
Mandibular angle plate 6 + 14 hole
right
01-14-019-14
Full mandibular reconstruction plate
4 + 17 + 4 hole
01-14-031-17
47
MANDIBULAR RECONSTRUCTION 2.7 SYSTEMPROFILE HEIGHT: 2.2 MM
Full mandibular reconstruction plate
6 + 17 + 6 hole
01-14-037-17
Full mandibular reconstruction plate
6 + 19 + 6 hole
01-14-037-19
Full mandibular reconstruction plate
4 + 19 + 4 hole
01-14-031-19
48
MANDIBULAR RECONSTRUCTION 2.7 SYSTEMPROFILE HEIGHT: 2.4 MM
4 + 13 + 4 hole
straight
01-14-100-21
4 + 3 + 4 hole
straight
01-14-100-11
4 + 5 + 4 hole
straight
01-14-100-13
4 + 7 + 4 hole
straight
01-14-100-15
4 + 9 + 4 hole
straight
01-14-100-17
4 + 11 + 4 hole
straight
01-14-100-19
49
MANDIBULAR RECONSTRUCTION 2.7 SYSTEMPROFILE HEIGHT: 2.4 MM
4 + 5 + 4 hole
angle left
01-14-111-13
4 + 5 + 4 hole
angle right
01-14-113-13
4 + 9 + 4 hole
angle left
01-14-111-17
4 + 9 + 4 hole
angle right
01-14-113-17
4 + 11 + 4 hole
angle left
01-14-111-19
4 + 11 + 4 hole
angle right
01-14-113-19
50
MANDIBULAR RECONSTRUCTION 2.7 SYSTEMPROFILE HEIGHT: 2.4 MM
4 + 19 + 4 hole
hole full mandibular reconstruction plate
01-14-131-27
4 + 13 + 4 hole
angle left
01-14-111-21
4 + 13 + 4 hole
angle right
01-14-113-21
4 + 17 + 4 hole
angle left
01-14-111-25
4 + 17 + 4 hole
angle right
01-14-113-25
4 + 17 + 4 hole
full mandibular reconstruction plate
01-14-131-25
4 + 21 + 4 hole
hole full mandibular reconstruction plate
01-14-131-29
51
MANDIBULAR RECONSTRUCTION SCREWS 2.7 SYSTEMSELFTAPPING, SELFHOLDING
2,7 mm HEX - Screws ( 5/PK)
Art. - No. Description
01-14-500-06 2,7 x 6 mm
01-14-500-08 2,7 x 8 mm
01-14-500-10 2,7 x 10 mm
01-14-500-12 2,7 x 12 mm
01-14-500-14 2,7 x 14 mm
01-14-500-16 2,7 x 16 mm
01-14-500-18 2,7 x 18 mm
01-14-500-20 2,7 x 20 mm
01-14-500-22 2,7 x 22 mm
01-14-500-24 2,7 x 24 mm
01-14-500-26 2,7 x 26 mm
01-14-500-28 2,7 x 28 mm
3,0 mm Emergency HEX - Screws ( 5/PK)
Art. - No. Description
01-14-503-10 3,0 x 10 mm
01-14-503-12 3,0 x 12 mm
01-14-503-14 3,0 x 14 mm
TWIST DRILL2,0 x 105 mm
STRYKER END for 2,7 mm Screws
01-14-850-10
TWIST DRILL2,0 x 103 mm
AO-END for 2,7 mm Screws
01-14-854-10
TWIST DRILL2,0 x 87 mm
AO-END for 2,7 mm Screws
01-14-854-87
52
INTRUMENTATION 2.7 SYSTEM
SCREWDRIVERremovable blade
HEX DRIVE01-14-810-20
BLADEHEX DRIVE
2.3 / 2.7 System01-13-810-24
HANDLEremovable
01-12-815-01
DEPTH GAUGE01-12-830-21
PLATE AND SCREWholding Forceps / TITAN
01-14-822-14
TAP INSET FOR HEX SCREWS
2.7 Diam.01-14-816-12
53
INTRUMENTATION 2.7 SYSTEM
PLATE BENDING PLIERWITH TITANIUM ROLLS
16,0 cm01-14-820-16
PLATE HOLDING FORCEPSRIGHT PLATTERN
15,5 cm01-14-823-15
PLATE BENDING TOOL15,0 cm
for profil 2.2 / 2.401-14-824-15
PLATE HOLDING FORCEPSLEFT PLATTERN
15,5 cm01-14-822-15
54
PLATE CUTTER TC47,0 cm
01-12-846-47
DRILL GUIDEdouble end
centric / excentriccomplete
01-14-842-00
DRILL GUIDEinsert centric
for 2.7 mm screws01-14-842-02
DRILL GUIDEinsert excentric
for 2.7 mm screws01-14-842-03
DRILL GUIDEinsert centric
for 2.0 mm screws01-14-842-04
HANDLE for transbuccal01-14-840-01
TRANSBUCCAL DRILLINGguide for screw driver
complete01-14-840-00
TROCAR01-14-840-02
DRILL GUIDE CENTRIC01-14-840-03
DRILL GUIDE EXCENTRIC01-14-840-06
CHEEK RETRAKTOR01-14-840-04
55
INSTRUMENTATION 2.7 SYSTEM
INSTRUMENT TRAYfor 2.7 System (empty)
01-14-802-01
STERILIZING CONTAINER285 x 280 x 150
C-321-150
TEFLON IMPLANT2.7 System (empty)
01-14-800-01
56
PRACTICE - UND BASIC OSTEO - SETS
MICRO 1.2 SYSTEM Tray only
01-10-801-01
Designed to hold small assortment of Titanium - plates, screws and minimum equipment of instruments
MICRO 1.6 SYSTEM Tray only
01-11-801-01
Titan Plates, Screws and instruments see our catalogue
MINI 2.0 SYSTEM Tray only
01-12-801-01
PRACTICE SET
BASIC 1.2 / 2.0 SYSTEM Implant Tray only
01-10-801-02
Designed to basic assortment of Titanium - osteo - synthesis plates, screws and basic equipment of basic - instruments of up to 2 differents systems.
BASIC 1.6 / 2.0 SYSTEM Implant Tray only
01-11-801-02
Titan Plates, Screws and instruments see our catalogue
INSTRUMENTEN - TRAY Instrument Tray only
01-11-802-03
BASIC SET
57
COMBO SETS MINI - OSTEO - SYNTHESIS
MICRO 1.2 SYSTEM Implant - Tray only
01-10-800-00
TIN 1.6 SYSTEM Implant - Tray only
01-11-800-00
TIN 1.6 SYSTEM NEUROImplant - Tray only
01-11-800-01
MINI 2.0 SYSTEM Implant - Tray only
01-12-800-02
MANDIBULAR FRACTURE 2.3 System
01-13-800-00Implant - Tray only
VARIO IMPLANT AND INSTRUMENT TRAY ONLY1.2 System 01-10-798-001.6 System 01-11-798-002.0 System 01-12-798-00
INSTRUMENT - TRAY for complete instrumentsand up to 6 implants trays
01-12-802-04
INSTRUMENT - TRAY ONLY for 1.2 / 1.6 / 2.0 Systems
01-12-802-03
INSTRUMENT - TRAY ONLY for 1.2 / 1.6 Systems
01-12-802-01
Titan Plates, Screws and instruments see our catalogue!
58
ContactFriedrich-Wöhler-Straße 1078576 Emmingen, Germanyphone +49(0)74 65 / 909188Fax +49(0)74 65 / 909024
[email protected] for use under our Hompage:www.mat-medical.com
CE1253INSTRUCTIONS FOR USE 4. (GB)
MAT GmbH&Co.KG Œ 0123 revision: 09.04.2009Friedrich-Wöhler-Str. 10 ; D-78576 Emmingen ; Tel.+49 7465 / 909 189 E-mail: [email protected] ; website: www.mat-medical.com ____________________________________________________________________________________________________________________________________________________________________________________
INSTRUCTIONS FOR USE 4. (GB) Warning: The implants described may only be used in combination with MAT products!OSTEOSYNTHESIS – TITANIUM IMPLANTS (Bone: Plates / Screws / Pins / Wires / Staples ) non-sterile IMPLANT MATERIAL: Implants made from titanium in accordance with ISO 5832-2 unalloyed Titanium; ISO 5832 – 3 Ti6A14V alloy ; ISO 5832 – 11 Ti6Al7Ni alloymanufactured by MAT GmbH&Co.KG. The surface of these implants is chemically passive: not magnetic. These implants can be combined with the standardised material provided that its composition lies within the analysis stipulated in the ISO 5832- 2 / ISO 5832-3 / ISO 5832-11 standard and the required specifications.The material wrought unalloyed titanium and alloyed titanium, is biocompatible and prevents a so-called chrome-nickel allergy by its nature! We would point out that implants only function correctly if the following basic rules are observed:- When selecting implants (bone: plates / screws / pins
wires / clips), care must be taken to choose the appropriate implants on the basis of the weight and level of activity of the patient, and the bone fracture to be treated.
- Note that by making the correct choice of biomechanics the forces to be transferred by the implants remain low.
- Extreme deformation of the implants must be avoided; the cautious bending of wires, plates and pins does not, however, lead to implant damage provided it is done with sufficient care.
- Repeated deformation should be avoided at all costs as it will fatigue the implant material.
- The re-use of implants is absolutely forbidden (single use).
- We strongly advise you to inform patients of the advantages and disadvantages of implants.
- Excessive strain as a result of body weight and the level of activity of the patient should be avoided due to the limited strength of the implants. Failure to observe these precautionary measures can have serious consequences for the healing process.
INDICATIONSThese relate to the current practice of applications of implants in osteosynthesis (e.g. see literature AO/ASIF Instruments and Implants Texhammer*Colton ISBN 3-540-56895-6 / ISBN 0-387-56895-6). CONTRAINDICATIONSAcute and chronic infections; muscle, nerve or vascular diseases that endanger the affected extremity; a lack of bony tissue or poor bone quality (e.g. severe osteoporosis); local bone tumours. Systemic diseases and metabolic disorders; infections and falls; drug dependence; obesity; highly physical activities together with activities involving extreme vibrations which can lead to overstraining of the implants.NOTESThe user should record and keep all information provided to the patient. It should be checked before use whether the patient tolerates the material to be implanted. The implants described in these instructions for use may only be used (implanted) by surgeons with the appropriate experience.POSSIBLE NEGATIVE EFFECTS (RISKS)Failure of the fracture to heal, allergy to the material, failure of the product (break, bending), bone deformation and refracture, infection. REMOVAL OF IMPLANTSThe implants are normally removed once the fracture has healed. CLEANING AND STERILISATION OF UNSTERILE IMPLANTSBefore use, the implants must be sterilised using a validated procedure (autoclaved). MAT GmbH&Co.KG VALIDATED PROCEDURES STERILISER: Steam autoclave: Temperature = 121° to 123° Celsius; Pressure = 1 – 1.2 bar (15 to 17 psi) with an exposure time of
at least 30 minutes in the packaged state.STERILISER: Autoclave with prevacuum: During the prevacuum phase the air is extracted from the chamber before the steam flows in.
Standard circulation for packaged objects: 132° to 135° Celsius; Pressure = 2 – 3 bar (27 to 30 psi) with an exposure time of at least 4 to 10 minutes.IMPORTANT NOTES: Every time the implants are used or sterilised you must first check that they function perfectly! In the event of failure to observe these instructions or demonstrable violation, no guarantee or compensation for damages can be provided.
59
Notice:
MEDICAL ADVANCED TECHNOLOGY
MEDICAL ADVANCED TECHNOLOGY
MAT GmbH & Co.KGFriedrich-Wöhler Straße 1078576 Emmingen-Liptingen, GermanyPhone: +49 (0)7465 909 188 · Fax : +49 (0)7465 909 024 www.mat-medical.com · [email protected]
Revision 29.06.2016TITANIUM IMPLANT SYSTEMS © MAT