titeﬂex - tht ostrava · 2019. 1. 10. · positive braid lock unibraid® reinforcement pdf...

Titeflex ®AEROSPACE

AVIATION

MARINE

DGEN380

from Price induction.

DA42 Twin Star from Diamond Aircraft gmbh.

F L E X I B L E S H O S E S

JUNE 2009

PDF Compressor Pro

http://www.pdfcompressor.org/buy.html

2

Summary

SUMMARY

Application Specification Pages

R101 - 130 Series Medium pressure MIL-DTL-27267 4-17

Smoothbore Teflon* hose 105 bar MIL-DTL-25579one or two Stainless steel 1500 PSI MIL-H-26626wire braid AS 1946

R160 - 240 Series High pressure AS 604 18-31

Smoothbore Teflon* hose 210 bar AS 1339Stainless steel UNI-BRAID** 3000 PSI

R157 - 660 Series High pressure 32-43

Smoothbore Teflon* hose 210 bar 3000 PSI AS 604SS wire braid & wrap (420 bar for ground application)

R154 - 370 Series Very High pressure 44-55

Smoothbore Teflon* hose 280 bar 4000 PSI AS 614SS wire braid & wrap (700 bar for ground application)

SA500 - 500 Series Very High pressure 56-61

Smoothbore Teflon* hose 350 bar Kevlar* & Cordura* braid 5000 PSI

R267/R367 - 410 & 480 Series Medium AS 1227 62-67

Convoluted Teflon* hose Low pressure AS 620Stainless Steel wire braid 70 bar 1000 PSI

Rapport p02-3 Sommaire ENG 18/05/09 16:26 PDF Compressor Pro


3

Application Specification Pages

R270 - 510 Series Low Pressure 68-77

Convoluted Teflon* hose 21 bar 300 PSI AS 1227Nomex* braid

S145 & S245 Series Medium / Low AS 1424 78-89

SS Annular convoluted pressureStainless Steel wire braid

Fire sleeves FLAMETITE** Fire resistant TSO - C35a 90-95

FG tubular (5mn); Fire proof TSO - C75 RF - RM Overmolded (15mn) AS 1055

Chafe Sleeves AS 1291 96-97

RP : polyester Braid Chafe protection Sleeves AS 1294Tubular Sleeves AS 1295Heat Shrink Sleeves

How to order 98-103

Conversion tables & Disclaimer 104-112

*Cordura®, Teflon® & Kevlar® are Dupont Trademark **Titeflex trademark

Rapport p02-3 Sommaire ENG 18/05/09 16:26 PDF Compressor Pro


4

R101 130 SeriesMedium pressure 105 bar / 1500 PSI

Application

This hose is used in medium pressure applications at an operating pressure of 105 bar.It is mainly used in hydraulic, fuel, lubricant and pneumatic systems and is compatiblewith all types of gases such as nitrogen and oxygen. The design of this hose enables itto withstand an absolute vacuum from ND 4 (-2 1/2) to ND 16 (-10). For larger sizes,we recommend to use an internal helical retainer to ensure good pressure resistance.

Hose construction

- Innercore: It consists of extruded Teflon® powder charged with carbon. The additionof a carbon charge before extrusion offers good electrical conductivity. The Teflon® isa PTFE (polytetrafluoroethylene), whose main characteristics are excellent resistance tochemicals, the ability to be used over a temperature range between -54°C and +232°C(-65°F and +450°F), and an unlimited shelf-life.

- Armour : The innercore is reinforced by a braid consisting of type 304 stainless steelwire. For the ND 4 (-2 1/2) to ND 20 (-12) the armour consists of a single braid, whilefor the ND 25 (-16) to ND 40 (-24) it consists of a double braid (reference followed bythe letter Z).

- The fittings are swaged to the hose by a progressive swaging method. Several familiesof materials are qualified: stainless steel fittings (insert, nut and collar), titanium fittings(titanium insert and nut, stainless steel collar), steel fittings (steel insert and nut, stain-less steel collar) and aluminium alloy fittings. For this family, it is necessary to differen-tiate between the -2 1/2 to -5(stainless steel insert and collar, aluminium alloy nut) andthe -6 to -24Z (aluminium alloy insert and nut, stainless steel collar).

130 SERIES - R101

p04-17 Canalisations Serie 130.qxp 19/05/09 11:56 PDF Compressor Pro


5

The catalogue provides the connection definitions linked to the most widely usedstandards, although Titeflex is specialized in the design of special fittings or fittingsmeeting other standards.

Specification approvals

MIL-DTL-25579 / AS1946 ( Size -6 and upper )MIL-DTL-27267

MS8005 & MS8006

TSO C53a for lubrication and fuel applicationTSO C75 for hydraulic application

AS1055 Type IIa & Type IIb, Class A & B for hose assemblies with a firesleeve inconformity with AS1072 or overmolded hose assemblies RM101 & RF101.

Please consult Titeflex Europe for any other qualification

Progressive-swagedstainless steel fitting

Stainless steel wire braid

Teflon® Innercore

Positive braid lock

p04-17 Canalisations Serie 130.qxp 19/05/09 11:56 PDF Compressor Pro


6

130 S

ER

IES

- R101

Hose specifications

These specifications also apply to RF101, RM101, RP101 & R101 with a FG Sleeve

R101-2 1/2 5/32 4 2,51 51 105 210 840 525 1120

R101-3 3/16 5 2,79 51 105 210 840 525 1050

R101-4 1/4 6 4,78 51 105 210 840 490 980

R101-5 5/16 8 5,97 51 105 210 700 455 910

R101-6 3/8 10 7,87 102 105 210 630 455 840

R101-8 1/2 12 9,93 117 105 210 560 420 700

R101-10 5/8 16 12,32 140 105 210 490 385 600

R101-12 3/4 20 15,62 165 70 140 350 245 420

R101-16Z 1 25 21,62 185 87,5 175 350 245 640

R101-20Z 1-1/4 32 27,97 279 70 140 280 210 320

R101-24Z 1-1/2 40 34,14 355 70 140 280 210 300

Hose Part number

Nominal Size

US mm

IDmini.mm

Bendradius

mini. mm

OperatingPressure

bar

ProofPressure

barRoom

T°mini.High

T° mini.Room T°Actual

Burst Pressure (bar)

p04-17 Canalisations Serie 130.qxp 19/05/09 11:56

PDF Compressor Pro


7

In Blue : Hoses with a chafe sleeve, please see the end of the catalogue for additional informationIn Red : Hoses with a fire sleeve as per AS 1055 or FAA, please see the end of the catalogue for additional information

p04-17 Canalisations Serie 130.qxp 19/05/09 11:56

PDF Compressor Pro


18

R160 240 SeriesHigh Pressure Hose assemblies 210 bar / 3000 PSI

Application

This hose is used for high pressure applications at an operating pressure of 210 bar forairborne equipment. This hose can be used for non-airborne equipment at an operatingpressure up to 350 bar, subject to technical approval by our design office. It is compatiblewith all types of gases such as nitrogen and oxygen and is suitable for both hydraulicand pneumatic systems.

Hose construction

- Innercore : It consists of extruded Teflon® powder charged with carbon. The additionof a carbon charge before extrusion offers good electrical conductivity. The Teflon® isa PTFE (polytetrafluoroethylene), whose main characteristics are excellent resistance tochemicals, the ability to be used over a temperature range between -54°C and +204°C(-65°F and +400°F), and an unlimited shelf-life.

- Armour : The innercore is reinforced by a braid consisting of type 304 stainless steelwire. For the ND 6 (-4) to ND 16 (-10) the armour consists of a single braid, while forthe ND 20 (-12) to ND 40 (-24) it consists of a double braid.

- The fittings are swaged to the hose using the progressive swaging method.The fittings are made of stainless steel (insert, nut and collar); regarding titanium fittings(insert and titanium nut, stainless steel collar) please call our technical department.The catalogue provides the connection definitions linked to the most widely usedstandards, although Titeflex is specialized in the design of special fittings or fittingsmeeting other standards.

240 SERIES - R160

p18-31 Canalisations Serie 240 19/05/09 11:57 Page 18PDF Compressor Pro


19


AS1339AS604MIL-H-26633MIL-H-38360TSO C75 type III B - S/PTSO C75 type III B - S/P-F et AS1055 Type IIa & Type IIb, Class A & B hose assemblieswith a firesleeve in conformity with AS1072 or overmolded hose assemblies RM160.

Please consult Titeflex Europe for any other qualification.

Teflon® Innercore


Positive braid lock UNIBRAID® reinforcement



20

240 S

ER

IES

- R160

Hose specifications

These specifications also apply to RC160, RM160 RP160 & R160 with a FG Sleeve(*) The R160-20 hose is qualified as per MIL-H-38360 with a limited Temperature (135°) for impulse.(**) The R160-24 Hose is not qualified as per MIL-H-38360

R 160-4 1/4 6 5,4 38 210 420 1120 840 1340

R 160-6 3/8 10 7,6 63,5 210 420 980 735 1160

R 160-8 1/2 12 9,9 73 210 420 980 735 1170

R 160-10 5/8 16 12,6 82,5 210 420 840 630 1170

R 160-12 3/4 20 15,6 98,5 210 420 840 630 1150

R 160-16 1 25 21,6 127 210 420 840 630 1115

R 160-20(*) 1-1/4 32 28,0 305 210 420 840 630 1045

R 160-24(**) 1-1/2 40 34,5 355 210 420 840 630

Hose Part numberND

US mm

ID min.mm

Bendradius

min. mm

Operatingpressure

bar

Proofpressure

barRoom Temp

min. High

Temp min.Actualroom T

Burst pressure (bar)

p18-31 Canalisations Serie 240 19/05/09 11:57 Page 20

PDF Compressor Pro


Hose SizeHose PartNumber

OD Maxmm

WTg/m

R160 9,91 149

RC160 12,45 180

4 RP160 11,94 180

RM160 16,26 313 20,62 50,8

R160+FG 17,50 299

R160 12,45 243

RC160 14,35 268

6 RP160 14,48 268

RM160 18,42 417 22,23 53,98

R160+FG 21,30 453

R160 15,62 345

RC160 17,27 378

8 RP160 17,65 378

RM160 22,23 580 25,4 63,5

R160+FG 24,60 615

R160 18,54 484

RC160 20,32 494

10 RP160 20,32 494

RM160 25,40 759 30,18 66,55

R160+FG 27,70 784

OD Cuffmm

LengthCuff mm

OD Cuffmm

LengthCuff mm


OD Maxmm

WTg/m

R160 25,15 982

RC160 27,18 1051

12 RP160 27,18 1051

RM160 30,56 1280 34,93 66,55

R160+FG 35,10 1422

R160 32,26 1518

RC160 34,16 1603

16 RP160 34,29 1603

RM160 38,10 1890 41,28 77,47

R160+FG 40,40 2013

R160 41,66 2753

RC160 (ND)

20 RP160 43,69 2853

RM160 46,99 3229 50,8 111,13

R160+FG 52,30 3343

R160 48,26 2842

RC160 (ND)

24 RP160 50,80 2982

RM160 (ND)

R160+FG 55,60 348221

In Blue : Hoses with a chafe sleeve, please see the end of the catalogue for additional informationIn Red : Hoses with a fire protection sleeve as per AS 1055 or FAA, please see the end of the catalogue for additional information


PDF Compressor Pro


32

R157 660 SeriesHigh Pressure Heavy Duty 210 bar / 3000 PSI

Application

This hose is used for high pressure applications at an operating pressure of 210 bar forairborne equipment. If our technical department agrees, it is possible to use this hoseat an operating pressure of 280 bar for airborne equipment. This hose can be used fornon-airborne equipment at an operating pressure up to 420 bar, subject to technicalapproval by our design office. It is compatible with all types of gases such as nitrogenand oxygen and is suitable for both hydraulic and pneumatic systems.

Hose Construction

- Innercore : It consists of extruded Teflon® powder charged with carbon. The additionof a carbon charge before extrusion offers good electrical conductivity. The Teflon® isa PTFE (polytetrafluoroethylene), whose main characteristics are excellent resistance tochemicals, the ability to be used over a temperature range of between -54°C and+204°C (-65°F and +400°F), and an unlimited shelf-life.

- Armour : The innercore is reinforced by several braids consisting of type 304 stainlesssteel controlled tension wires. For the ND 6 (-4) the armour consists of two superimposedbraids. For the ND 10 (-06) and ND 12 (-08) the armour consists of a first braid then oftwo superimposed coiled braids and a last braid. For the ND 16 (-10) to ND 25 (-16)the armour consists of a first braid then of four superimposed coiled braids and a lastbraid.

- The fittings are swaged to the hose using the progressive swaging method.The fittings are made of stainless steel (insert, nut and collar); regarding titanium fittings(insert and titanium nut, stainless steel collar) please call our technical department. Thecatalogue provides the connection definitions linked to the most widely used standards,although Titeflex is specialised in the design of special fittings or fittings meeting otherstandards.

660 SERIES - R157



33


AS604

TSO C75 type III B - S/PTSO C75 type III B - S/P-F for hose assemblies with a firesleeve in conformity with AS1072 or for overmolded hose assemblies RM157.AS1055 Type IIb, Class A & B for hose assemblies with a firesleeve in conformity withAS1072 or for overmolded hose assemblies RM157.

Please consult Titeflex Europe for any other qualification .

Progressive-swaggedstainless steel fitting

Postive braid lock

Teflon® Innercore

Stainless steel wirespiral wrap N°1

Stainless steel wireouter braid

Stainless steel wireinner braid




34

660 S

ER

IES

- R157

Hose specifications

These specifications also apply to RP157, RM157 & R157 with a FG sleeve

R 157-4 1/4 6 2,8 76 210 420 1120 840 1330

R 157-6 3/8 10 5,7 127 210 420 980 735 1260

R 157-8 1/2 12 7,6 146 210 420 980 735 1120

R 157-10 5/8 16 10,0 165 210 420 840 630 1150

R 157-12 3/4 20 13,3 197 210 420 840 630 1150

R 157-16 1 25 22,1 244 210 420 840 630 1050

HosePart number

ND

US mm

ID min.mm

Bendradius

min. mm

Operatingpressure

bar

Proofpressure

barRoom temp

min.High temp

min.Actual room

temp



PDF Compressor Pro


35

Hose specifications



PDF Compressor Pro


44

R154 370 SeriesUltra High Pressure 280 bar / 4000 PSI

Application

This hose is used for high pressure applications at an operating pressure of 280 bar, forairborne equipment in accordance with the requirements of AS614 or an operatingpressure of 345 bar for airborne equipment in accordance with the requirements ofAS4098. This hose may be used for non-airborne equipment at operating pressures ofup to 551 bar, subject to technical approval by our design office. It is compatible withall types of gases such as nitrogen and oxygen and is suitable for both hydraulic andpneumatic systems.

Hose Construction


- Armour : the innercore is reinforced by several braids consisting of type 304 stainlesssteel controlled tension wires. For the ND 6 (-4) and ND 10 (-06) the armour consistsof a first braid then of two superimposed coiled braids and of a last braid. For the ND12 (-08) to ND 25 (-16) the armour consists of a first braid then four superimposed coi-led braids and a last braid.

370 SERIES - R154



45

- The fittings are swaged to the hose using a progressive swaging method. The fittingsare made of stainless steel (insert, nut and collar); regarding titanium fittings (insert andtitanium nut, stainless steel collar) please call our technical department. The catalogueprovides the connection definitions linked to the most widely used standards, althoughTiteflex is specialised in the design of special fittings or fittings meeting other standards.

Specification Approvals

AS614AS4098ISO 9938AS1055 Type IIb, Class A and B for hoses fitted with a fire sleeve in conformity withAS1072 or for RM154 overmolded hoses.


Progressive-swaggedstainless steel fitting



Teflon® Innercore

Postive braid lock Stainless steel wireouter braid

Stainless steel wireinner braid



46

370 S

ER

IES

- R154

Hose specifications

These specifications also apply to RM154, RP154, R154 with a FG Sleeve.

R 154-4 1/4 6 5,8 76 280 560 1120 840 1780

R 154-6 3/8 10 7,6 127 280 560 1120 840 1820

R 154-8 1/2 12 10 146 280 560 1120 840 1750

R 154-10 5/8 16 12,6 165 280 560 1120 840 1680

R 154-12 3/4 20 15,3 197 280 560 1120 840 1800

R 154-16 1 25 21,6 244 280 560 1120 840 1500

R 154-20 1-1/4 32 28,0 305 280 560 1120 840 1050

Hose Part number

ND

US mm

IDmin. mm

Bendradius

min. mm

Operatingpressure

bar

Proofpressure

barRoom temp

min.High temp

min.Actual room

temp



PDF Compressor Pro



OD max.mm

Weightg/m

ODCuffmm

LengthCuffmm

R154 12,57 357

RP154 14,86 396

4 RM154 20,70 647 25,40 63,50

R154+FG 21,30 567

R154 15,67 595

RP154 17,96 637

6 RM154 23,80 932 26,97 66,68

R154+FG 24,60 865

R154 18,75 734

RP154 21,03 775

8 RM154 26,87 1144 30,18 71,42

R154+FG 27,70 1034

R154 22,23 1042

RP154 ND

10 RM154 30,35 1524 33,32 82,55

R154+FG 31,00 1392

R154 29,21 1697

RP154 ND

12 RM154 30,35 2250 39,67 84,12

R154+FG 40,40 2192

R154 36,07 2768

RP154 38,86 2860

16 RM154 44,20 3506 47,63 84,12

R154+FG 48,30 3298

R154 42,67 3527

RP154 ND

20 RM154 ND 73,03

R154+FG 52,30 4117


OD max.mm

Weightg/m

ODCuffmm

LengthCuffmm

47

In Blue : Hoses with a chafe sleeve, please see the end of the catalogue foradditional informationIn Red : Hoses with a fire protection sleeve as per AS 1055 or FAA, please seethe end of the catalogue for additional information


PDF Compressor Pro


56

SA500 500 SeriesUltra high Pressure 350 bar / 5000 PSI

Application

This hose is used for very high pressure applications at an operating pressure of 350 bar,for airborne equipment in accordance with the requirements of AS5951 (except for thepulsed twisting test) or an operating pressure of 275 bar for airborne equipment inaccordance with the requirements of AS1975. This hose may be used for non-airborneequipment at operating pressures of up to 650 bar, subject to technical approval by ourdesign office. It is compatible with all types of gases such as nitrogen and oxygen andis suitable for both hydraulic and pneumatic systems.

Hose Construction


- Armour : The innercore is reinforced by several layers of braid comprising controlledtension kevlar® fibres. In order to protect the kevlar® from chemical and ultravioletattack, a teflon® tape is wrapped around it. A final braid consisting of controlledtension cordura® fibres offers the hose excellent abrasion resistance.

- The fittings are swaged to the hose using a progressive radial swaging method (alsocalled crimping). There are two fitting families. The hose equipped with titanium alloyfittings (titanium insert, nut, hexagonal ring, stainless steel crimping collar) wasdeveloped and tested to comply with the requirements of standards AS1975 and AS5951. The hose equipped with stainless steel fittings (stainless steel insert, nut, hexago-

500 SERIES - SA500



57

nal ring and crimping collar) was developed and tested to comply with therequirements of standards AS1339, AS1975 and AS 5951 (except for impulse testingwith torsion). The catalogue provides the connection definitions linked to the mostwidely used standards, although Titeflex is specialized in the design of special fittings orfittings meeting other standards.

Specifications Approvals

AS5951 pendingAS1975AS1339


Teflon® Innercore


Positive braid lock UNIBRAID® reinforcement



58

500 S

ER

IES

- SA

500

Hose specifications

These specifications also apply to SA500 with a FG sleeve.(*) Qualification to AS 5951 - 5080 PSI / 350 bar for size 12 is pending.(**) Qualification to AS1975 for size 16 is pending.

SA500-4 1/4 6 5,4 38,10 350 701 1401 1051 1862

SA500-6 3/8 10 7,6 63,5 350 701 1401 1051 2068

SA500-8 1/2 12 10 73,2 350 701 1401 1051 2068

SA500-10 5/8 16 12,4 82,6 350 701 1401 1051 1862

SA500-12* 3/4 20 15,9 101,6 350 701 1401 1051 N/A

SA500-16** 1 25 22,2 243,8 276 552 1103 827 N/A

Hose Part number

ND

US mm

IDMin.mm

BendRadius

Min. mm

OperatingPressure

bar

ProofPressure

barRoom Temp

Min.High T°

Min.Actual

Room Temp

Burst Pressure (bar)


PDF Compressor Pro


59 In Blue : Hoses with a chafe sleeve, please see the end of the catalogue for additional information

In Red : Hoses with a fire protection sleeve as per AS 1055 or FAA, please see the end of the catalogue foradditional information


PDF Compressor Pro


62

R267 410 SeriesR367 480 SeriesMedium Pressure 70 bars / 1000 PSI convoluted

Introduction

The R267 - Series 410 hose is a product that has existed since 1959. The R367 - Series480 hose is an equivalent product developed in 1998, corresponding to the samemanufacturing processes, the same applications and the same approvals. The R367hose is an upgrade of the R267 hose.

Application

These hoses are used for medium pressure applications at an operating pressure of 70bar. They were developed to handle applications requiring greater flexibility orimproved negative pressure strength than products consisting of extruded PTFE. Theyare compatible with all types of gases such as nitrogen and oxygen and with all typesof liquids such as fuels or hydraulic fluids. The design of this hose enables it towithstand an absolute vacuum from ND 6 (-04) to ND 20 (-12). For larger sizes, werecommend to use an internal helical retainer to ensure good pressure resistance.

Hose Construction

- Innercore : It consists of tapes wound around a helical matrix. The first layer is a tapeof carbon-charged Teflon®. The addition of a carbon charge offers good electricalconductivity. The second tape is thicker and consists solely of Teflon®. Finally, the lasttape consists of a silk fabric mixed with Teflon®. The Teflon® is a PTFE (polytetrafluo-roethylene), whose main characteristics are excellent resistance to chemicals, theability to be used over a temperature range between -54°C and +204°C (-65°F and+400°F), and an unlimited shelf-life.

410 & 480 SERIES - R267 / R367

p62-67 Canalisations Serie 400 et 480 18/05/09 16:32 Page 62PDF Compressor Pro


63

- Armour :the innercore is reinforced by a braid consisting of type 304 stainless steelwire. The armour consists of a single braid which, when combined with a convolutedinnercore, offers a good compromise between pressure strength, light weight andflexibility.

- The fittings are progressively swaged to the hose. The fittings (insert, nut and collar)are made either of stainless steel or aluminium alloy. A simple restriction of themaximum operating temperature to 135°C (+275°F) for the fittings consisting ofaluminium alloys is required. The catalogue provides the connection definitions linkedto the most widely used standards, although Titeflex is specialized in the design ofspecial fittings or fittings meeting other standards.


AS620ISO 7313TSO C53a Type A for lubrication and fuel applicationTSO C75 Type 11A-S/P for Hydraulic applicationTSO C53a Type C, TSO C75 Type IIA-S/P-F & AS1055 Type IIa & Type IIb, Class A & BClass A & B for hose assemblies with a firesleeve in conformity with AS1072 or forovermolded hose assemblies RM267, RF267, RM367


Teflon® InnercoreProgressive-swagedstainless steel fitting

Positive braid lock

p62-67 Canalisations Serie 400 et 480 18/05/09 16:32 Page 63PDF Compressor Pro


R 267-4 1/4 6 7,37 31,75 12,70 70 140 276 193 303 711

R 267-6 3/8 10 9,53 57,15 19,05 70 140 276 193 414 711

R 267-8 1/2 12 13,46 73,03 25,40 70 140 276 193 490 711

R 267-10 5/8 16 15,75 76,20 38,10 70 126 248 172 310 711

R 267-12 3/4 20 19,94 95,25 50,80 70 126 248 172 448 711

R 267-16 1 25 25,40 127,00 76,20 70 126 248 172 359 558

R 267-20 1-1/4 32 31,50 158,00 N/A 70 126 248 172 296 406

R 267-24 1-1/2 40 38,10 190,50 N/A 52,5 105 207 145 262 305

R 267-32 2 50 50,42 254,00 N/A 17,5 35 69 48 238 217

R 267-48(*) 3 80 76,96 381,00 N/A 7 14 28 19 0 127

R 267-64(*) 4 100 102,36 609,60 N/A 7 14 28 18 0 76

Hose PartNumber

DN NominalDiameter

US mm AS 620 AS 1227

IDMin.mm

Bend radiusmin. (mm)

OperatingPressure bar

bar

ProofPressure

bar

Max. Neg.Pressure

204°Cmm Hg

Burst Pressure

min.20°C

High temp

min.actual20°C

64

410 &

480 S

ER

IES

- R267 / R

367

Hose specifications R267

These specifications also apply to RF267, RM267, RP267 & R267 with a FG sleeve...

p62-67 Canalisations Serie 400 et 480 18/05/09 16:32 Page 64

PDF Compressor Pro


65


In Blue : Hoses with a chafe sleeve, please see the end of the cataloguefor additional informationIn Red : Hoses with a fire protection sleeve as per AS 1055 or FAA,please see the end of the catalogue for additional information


PDF Compressor Pro


66

410 &

480 S

ER

IES

- R267 / R

367

These specifications also apply to RM367, RP367 & R367 with a FG sleeve.(*) The qualification as per AS620 & AS1227 of the R367-04 is pending.



PDF Compressor Pro


R367 27,43 429

RP367 29,90 533

12 RM367 35,36 893 39,67

R367+FG 35,10 869

R367 33,02 625

RP367 35,89 729

16 RM367 39,67 1027 41,28 66,68

R367+FG 40,40 1120

R367 39,57 857

RP367 41,73 976

20 RM367 45,26 1250 48,9 60,33

R367+FG 49,50 1447

R367 46,28 893

RP367 49,45 1086

24 RM367 51,61 1458 55,98 60,33

R367+FG 55,60 1533


OD Max.mm

WTg/m

R367 11,61 110

RP367 14,27 164

4 RM367

R367+FG 17,50 260

R367 14,61 135

RP367 17,07 231

6 RM367 21,89 506 24,38 47,63

R367+FG 21,30 345

R367 19,99 321

RP367 22,94 381

8 RM367 26,47 566 30,18 57,15

R367+FG 24,60 591

R367 22,15 321

RP367 24,00 387

10 RM367 30,53 744 33,32 60,33

R367+FG 27,70 621

OD Cuffmm

LengthCuff mm

66,68


OD Max.mm

WTg/m

OD Cuffmm

LengthCuff mm

Not available

67




PDF Compressor Pro


68

R270 510 SeriesLow Pressure 21 bar / 300 PSI convoluted

Application

This hose is used for low pressure applications at an operating pressure of 21 bar. It wasdeveloped to handle applications requiring a very great flexibility and a very lightweight. It also offers an improved vacuum strength than products consisting ofextruded PTFE. It is mainly used for anemometric circuits and drains. It is compatiblewith all types of fluids and gases. The design of this hose enables it to withstand anabsolute vacuum from ND 6 (-04) to ND 20 (-12). For ND 25 (-16) we recommendusing an internal helical retainer to ensure good pressure resistance.

Hose Construction

- Innercore: It consists of tapes wound around a helical matrix. The first layer is a tapeof carbon-charged Teflon®. The addition of a carbon charge offers good electricalconductivity. The second tape is thicker and consists solely of Teflon®. Finally, the lasttape consists of a silk fabric mixed with Teflon®. The Teflon® is a PTFE (polytetrafluo-roethylene), whose main characteristics are excellent resistance to chemicals, theability to be used over a temperature range between -54°C and +135°C (-65°F and+275°F), and an unlimited shelf-life.

- Armour : The innercore is reinforced by a braid consisting of green Nomex® nylonwires. The armour consists of a single braid which, when it is combined with aconvoluted innercore, offers a good compromise between a very light weight and agood flexibility.

- The fittings are progressively swaged to the hose. The fittings (insert, nut and collar)are made either in stainless steel or aluminium alloy. The catalogue provides theconnection definitions linked to the most widely used standards, although Titeflex isspecialized in the design of special fittings or fittings meeting other standards.

510 SERIES - R270

p68-77 Canalisations Serie 510 ET 520 18/05/09 16:33 Page 68PDF Compressor Pro


69


AS1227 class 2Compatible with FDA requirements for use with drinkable water systemsComplies with FAA requirements for cab equipment


Teflon® InnercoreProgressive-swagedstainless steel fitting

Positive braid lock

p68-77 Canalisations Serie 510 ET 520 18/05/09 16:33 Page 69PDF Compressor Pro


78

S145 / S245 SeriesStainless Steel Metal Hoses

Application

Medium pressure hose assemblies, aerospace, missile and test bench use. Can be use athigher pressure with our engineering approval for ground support, Marine or non-surgeapplications.Parallel convolutions offer an excellent resistance to vibrations, thermal dilatation andimpulse.

Temperature range (SS innercore): - 268°C + 455°C (- 450°F + 850°F).Temperature range (Inconel innercore): - 268°C + 648°C (- 450°F + 1200°F).

Series 245 has approximately 25% more convolutions per inch providing greaterflexibility. This design is also used for double braid hose configurations to attain higherpressure ratings.

Hose Construction

- Innercore : Annular convoluted type 321 stainless steel, thin elongated welded tubingwall, it also exists in inconel. - Reinforcement : Type 321 stainless steel wire braid.- Fittings : Standard methods of fitting attachment is gas Tungsten arc welding (typeB2). Brazed fittings can be specified but temperature rating must be reducedaccordindly (430°c)

S145 / S245 SERIES

p78-89 Canalisations Serie S145 ET S245 18/05/09 16:34 Page 78PDF Compressor Pro


79


AS 1424 until size 16

All pressure data are based upon constant pressure at temperature shown in the data-sheet. Data based upon test, not theoretical calculated values.

Minimum bend radii are given for both static and constant flexing conditions. Staticbend is the smallest radius in which a hose should be bent upon installation. Exceedingthis value can cause permanent deformations of convolutions.

Bend radius is the minimum radius to which an assembly may be subjected with repea-ted flexing.

Maximum test pressure is the highest recommended value for proof pressure tests.These values are established at pressure levels in which stresses will begin to induce per-manent deformation of convolutions.If maximum test values are exceeded flexibilty will be reduced.

p78-89 Canalisations Serie S145 ET S245 18/05/09 16:34 Page 79PDF Compressor Pro


80

S145 / S

245 S

ER

IES

Hose Specifications

The pressure given are for static use onlyPlease consult Titeflex for double braid * other materials like 316SS or Inconel 625 are avalaible please consult Titeflex for additional information.

p78-89 Canalisations Serie S145 ET S245 18/05/09 16:34 Page 80

PDF Compressor Pro


81

Hose Specifications

The pressure given are for static use onlyPlease consult Titeflex for double braid * other materials like 316SS or Inconel 625 are avalaible please consult Titeflex for additional information.

p78-89 Canalisations Serie S145 ET S245 18/05/09 16:34 Page 81

PDF Compressor Pro


90

Flametite** fire proof sleeves have been developed and qualified by Titeflex accordingto FAA standards and most of the aeronautic industry specifications for their use withTiteflex hoses made of extruded or convoluted Teflon*.

These sleeves are available in different shapes:

• FG tubular sleeve which is stripped onto the hose to be protected.

• RF and RM+ over-molded sleeves. They are an integral part of the hose.

• Helicoid sleeve: can be placed on any hose assembly or equipment easily to pro-tect it.

+ RM qualified only for a few diameters* Dupont registered trademark ** Titeflex registered trademark

G.P.M. : Gallon per minute.

FLAMETITE FIRE SLEEVE

FLAMETITE** Fire Sleeves for Teflon* Hose assemblies

p90-95 gaine anti feu Flametite 18/05/09 16:35 Page 90PDF Compressor Pro


91

Fire sleeve selection table

Qualifying specificationfor fire testing

Qualifying Parameters

Fluid Flow G.P.M. Duration

Hose Series Tubular Integral

Flametite Fire Sleeve

FG RF RMFlow l/mn

FAA TSO C53a, Type C Fuel 5 X I.D.2 19 X I.D.2 5 410 X X& Oil

FAA TSO C53a, Type D Fuel 5 X I.D.2 19 X I.D.2 5 130 (SS) X X& Oil 130 (LW) X

FAA TSO C75, Type IIA-S/P-F Hydraulic 5 X I.D.2 19 X I.D.2 5 400 X410 X X

FAA TSO C75, Type IIIA-S/P-F Hydraulic 1 X I.D.2 3,8 X I.D.2 5 130 X XFAA TSO C75, Type IIIB-S/P-F Hydraulic 1 X I.D.2 3,8 X I.D.2 5 240 X X

660 X +AS 1055, Type IIa, Class A-S/P Fuel 5 X I.D.2 19 X I.D.2 5 130 X X

& Oil 410 X XAS 1055, Type IIa, Class B-S/P Fuel 5 X I.D.2 19 X I.D.2 15 130 X X

& Oil 410 X X130 X X

AS 1055, Type IIb, Class A-S/P Hydraulic 1 X I.D.2 3,8 X I.D.2 5 240 X +660 X +240 X +660 X

AS 1055, Type IIb, Class B-S/P Hydraulic 1 X I.D.2 3,8 X I.D.2 15 400 X410 X X

p90-95 gaine anti feu Flametite 18/05/09 16:35 Page 91

PDF Compressor Pro


92


Flametite** fire sleevesFG tubular

The Flametite** FG tubular fire sleeve is composed of braided fiberglass tubing overwhich is extruded a uniform layer of specially compounded silcone material. This Sleeveis conform to SAE standard AS 1072.

The Flametite** FG fire sleeve on Titeflex Teflon hose assemblies in 130 , 240, 370400/410, 480 and 660 Series offers performance that exceeds the most stringent requi-rements of TSO-C53a, TSO-C75 & AS 1055 15 minutes at 1100°C.

Main characteristics :

• One of the most effective fire protection enabling close fit to hose for neater ins-tallation

• Operating temperature : - 54°C to +260°C

• Made in long lengths

• Suitable for field assembly and repair: construction allows installation for assem-bly over a standard nut.

• Non age sensitive.

* Dupont registered trademark. ** Titeflex resgistered trademark

Clamps for Fire Sleeves

Hose PartNumber

97110-32

Titeflex Part Number Clamps

97110-44 97110-48 97110-64

R101 -3,-4,-5 -6 -8,-10 -12 -16Z -20Z,-24ZR160 -4 -6 -8,-10 -12 -16 -20,-24

R251/R267 -4 -6 -8,-10 -12 -16 -20,-24 -32 -48R157 -4 -6 -8,-10 -12 -16R154 -4 -6 -8,-10 -12 -16 -20

97110-12 97110-16 97110-22 97110-24



93

Flametite** FG tubular fire sleeve data

Titeflex PartNumber OD MAX (mm)

Weightg/m

R101

HOSE ASSEMBLY USAGE

R160 R251/R267 R157 R154ID NOM (mm) ID MIN (mm)

TF 1072-06 9,6 8,6 17,5 150 -3 ; -4 -4TF 1072-07 11,2 10,4 19,8 190 -5 -3 -4TF 1072-08 12,7 11,9 21,3 210 -6 -6 -4 -4TF 1072-10 15,8 15,0 24,6 270 -8 -8 -5 ; -6 -6 -6TF 1072-12 19,0 18,3 27,7 300 -10 -10 -8 -8 -8TF 1072-14 22,4 21,6 31 350 -12 -10 -10TF 1072-16 25,4 24,6 35,1 440 -12 -10TF 1072-18 28,7 27,9 38,1 470 -16Z -12TF 1072-20 31,8 31,0 40,4 495 -16 -16 -12 -12TF 1072-24 38,1 37,3 48,3 530 -20Z -16 -16TF 1072-26 41,8 40,5 49,5 560 -20TF 1072-28 44,4 43,4 52,3 590 -24Z -20 -20TF 1072-30 47,6 46,9 55,6 640 -24 -24TF 1072-38 60,4 59,4 69,6 840 -32

p90-95 gaine anti feu Flametite 18/05/09 16:35 Page 93

PDF Compressor Pro


94


Flametite** fire proof sleevesovermolded, type RF, RM

The FIametite** RF and RM fire proof over-molded sleeves result from the extrusion ofa silicone composite on the hose. Each type of sleeve corresponds to an FAA or AS 1055standard (see page 95).The silicone sleeve, type RF is separated from the hose and peeled back. Then, whencrimping and final check are completed, it is stuck back on the hose with the swagingcollar previously coated with silicone.The silicone sleeve, type RM can be removed from the hose in the crimping area, thenwhen crimping and final check are completed, the stripped area is covered with anover-molded silicone sleeve.

Main characteristics:

• Provides constant and stable diameter for coupling fastening.

• Light weight.

• Acts as vibration dampener.

• Adherence to the hose provides even bending and sustained flexibility.

• Excellent resistance to abrasion.

• Operating temperature : - 54°C to +232°C or +204°C depending of the hose.

• Avoids using clamps for holding sleeve.

• Good resistance to fluids.

• Non age sensitive.

* Dupont registered trademark. ** Titeflex resgistered trademark.



95

Flametite** Helicoid fire proof sleeves

For repairs by the user, Titeflex can provide fire proof sleeves in the form of helix madeof three layers of glass fiber coated with composite silicone. These sleeves are qualifiedaccording to the most stringent criteria of TSO-C53, TSO-C75 and AS1055 which requi-re 15 minutes resistance to fire with a flow rate of 1 x I.D.2 (GPM)+.This type of sleeve can very often be used without removing the fire sleeve damaged.The sleeve is designed for guaranteeing an even outside diameter after installation.These sleeves can also be used on various equipment such as rigid metal tubes and elec-tric harness.

** Titeflex registered trademark * ''I.D. (Inside Diameter) in inches

+ G.P.M. Gallon per minute.

PartNumber

LengthRatio

Weightg/m

R101 R160 R251/R267 R157 R154

Spiral Wrap Hose

110112-1 1,09 253 -3110112-1 1,37 316 -4110112-1 1,62 374 -5 -4 -4110112-1 1,87 431 -6 -4110112-2 0,98 455 -6 -4110112-2 1,17 543 -8 -6 -6110112-2 1,23 571 -8 -6110112-2 1,42 659 -10 -10 -8 -8110112-2 1,62 754 -12 -8110112-2 1,81 840 -10 -10 -10110112-3 0,99 920 -12110112-3 1,08 1004 -12 -12 -12110112-3 1,14 1060 -16Z110112-3 1,27 1181 -16110112-3 1,39 1292 -20Z -16 -16 -16110112-3 1,56 1450 -20110112-4 1,03 1560 -24Z -20 -20110112-4 1,16 1750 -24 -24110112-4 1,45 2195 -32



96

Chafe SleevesTiteflex RP

RP integral sleeve consists of polyester yarns directly braided on the hose, which pro-vides excellent cohesion with the outer braid.

Main characteristics:

• Provides one of the best antiwear protections.

• Resists to solvents, fuels, hydraulic fluids, aeronautic anti corrosion paints andcleaning detergents.

• Provides even diameter when fastening.

• Operating temperature: - 54°C +150°C.

• Resists to aging.

• Fire retardant, does not drip.

• Avoids using a clamp for holding the sleeve.

• Does not affect hose flexibility.

Anti-abrasion heat shrinkable sleeves

When the use of a thin sleeve tightened to the pipe is required, Titeflex proposes heatshrinkable sleeves made of polyolefin or Teflon*. These sleeves are slipped onto the hoseassembly then shrinked. Note that the use of these sleeves may reduce hose flexibility,so when maximum flexibility is the objective, it is recommended to use hoses coveredwith integral anti abrasion RP sleeves.

Anti-abrasion tubular sleeves

Teflon* : These sleeves are totally inert to all on-board fluids (fuel, lubricants...). Theyoffer good protection against friction at temperatures up to +232° C.

Neopren : These sleeves are « blown » on the pipe and held in place with clamps.Neopren is recommended for ground applications. The operating temperature is -54°C+121° C.

Vinyl : These plastic sleeves are used for reduced temperature range (-54°C +121°C).

* Dupont registered trademark

CHAFE SLEEVES

p96-97 Gaines ANTI ABRASION 18/05/09 16:36 Page 96PDF Compressor Pro


97

Chafe Sleeves selection table

Hose Part Number Tubular Sleeve

R157«V» Vinyl «N» Neoprene «C» Teflon*

“P/N” WT g/m “P/N” WT g/m “P/N” WT g/m “P/N” WT g/m

Heat Shrinkable Sleeve

«K1» Black PolyolefinR160R101

-3 91843-2 17,8 94751-1 43,5 R100-103 35,7 96840-8B 16

-4 91843-3 29,7 94751-4 54,4 R100-111 44,6 96840-8B 16

-5 91843-4 34,2 94751-15 66,3 R100-107 50,6 96840-8B 16

-4 91843-4 34,2 94751-2 73,4 R100-107 50,6 96840-8B 16

-4 91843-4 34,2 94751-5 74,8 R100-129 53,6 96840-8B 16

-6 91843-5 52,1 94751-5 74,8 R100-106 56,5 96840-9B 30

-6 91843-5 52,1 94751-6 83,4 R100-130 63,9 96840-9B 30

-8 -6 91843-6 56,5 94751-7 95,2 R100-122 74,4 96840-9B 30

-8 91843-6 56,5 94751-14 112,9 R100-109 77,4 96840-10B 43

-10 91843-7 80,3 94751-14 112,9 R100-110 83,3 96840-10B 43

-8 91843-7 80,3 94751-8 116,9 R100-127 89,9 96840-10B 43

-10 91843-7 80,3 94751-9 131,9 R100-127 89,9 96840-10B 43

-10 91843-12 87,8 94751-17 155,1 R100-126 92,2 96840-10B 43

-12 91843-12 87,8 94751-9 131,9 R100-112 96,7 96840-10B 43

-12 -12 91843-8 130,9 94751-16 182,3 R100-113 126,5 96840-11B 88

-16Z 91843-8 130,9 94751-3 183 R100-123 133,9 96840-11B 88

-20Z -16 -16 91843-10 194,9 94751-11 234 R100-124 162,2 96840-11B 88

p96-97 Gaines ANTI ABRASION 18/05/09 16:36 Page 97

PDF Compressor Pro


titeﬂex - tht ostrava · 2019. 1. 10. · positive braid lock unibraid® reinforcement pdf...

Documents