tm 5-4320-248-25p - liberated · pdf filetm 5-4320-248-25p department of the ... ment missile...

TM 5-4320-248-25PD E P A R T M E N T O F T H E A R M Y T E C H N I C A L M A N U A L

O R G A N I Z A T I O N A L , D I R E C T A N D

G E N E R A L S U P P O R T , A N D D E P O T

M A I N T E N A N C E R E P A I R P A R T S A N D

S P E C I A L T O O L S L I S T

F U E L S Y S T E M , T R A N S F E R , P O R T A B L E ,

PUMP , CENTRIFUGAL , 100 GPM; TWO

DISCHARGE HOSE ASSEMBL IES ;

ONE SUCT ION HOSE ASSEMBLY ;

T W O N O N - A U T O M A T I C N O Z Z L E

ASSEMBL IES ; ONE MONITOR GO -NO -GO

GAGE, 100 GPM; 3 HP GASOLINE ENGINE;

O N E B A S K E T A S S E M B L Y K E N C O

MODEL 114MX1A FSN 4320-900-8544

H E A D Q U A R T E R S , D E P A R T M E N T OF THE ARMY

FEBRUARY 1968

Page

TM 5-4320-248-25P

TE C H N I C A L M A N U A L

I

H E A D Q U A R T E R SDEPARTMENT OF THE ARMY

No. 5-4320-248-25P WASHINGTON , D. C., 12 February 1968

Organizational, Direct And General Support, And DepotMaintenance

Repair Parts And Special Tools List

FUEL SYSTEM, TRANSFER, PORTABLE, PUMP, CENTRIFUGAL,100 GPM; TWO DISCHARGE HOSE ASSEMBLIES; ONE SUCTIONHOSE ASSEMBLY; TWO NON-AUTOMATIC NOZZLE ASSEM-

BLIES; ONE MONITOR GO-NO-GO GAGE, 100 GPM; 3 HPGASOLINE ENGINE; ONE BASKET ASSEMBLY KENCO MODEL

114MX1AFSN 4320-900-8544

CURRENT AS OF NOVEMBER 1967

Paragraph

SECTION I. INTRODUCTIONScope ------------------------------------------------------------------- 1General- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2Explanation of columns-- - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - 3Special information-- - - - -- -- - - - - - - - - - - - - - - - - - - - - 4How to locate repair parts -- - - - - - -- - - - - - - - - - - - - - - - - - 5 Abbrevi ations - - - -- - - - - - - - - - - - - -- - -- - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - 6 Federal supply codes for manufactures 7Recommendations for maintenance manual improvements - - - - - - - - - - - - - - - - - - - - - 8

II. PRESCRIBED LOAD ALLOWANCE _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

III. SPECIAL TOOLS, TEST AND SUPPORT EQUIPMENTFOR ORGANIZATIONAL MAINTENANCE (NOT APPLICABLE)

SECTION IV. REPAIR PARTS FOR ORGANIZATIONAL MAINTENANCEGroup 01. Engine

0100 Engine assembly _________________________________________________________________

i i i

i i i

i i i

vivivivivi

vii

10106 Engine lubrication system_________________________________________________________ 10107 Engine starting system

03. Fuel System0 3 0 1 C a r b u r e t o r 0304 Air cleaner 0306 Tanks, lines, and fittings 0 3 0 8 E n g i n e s p e e d g o v e r n o r

04. Exhaust System0 4 0 1 M u f f l e r a n d p i p e s

05. Cooling System0 5 0 2 S h r o u d s

06. Electrical System0 6 0 5 I g n i t i o n c o m p o n e n t s

2

3344

5

5

6

i

TM 5-4320-248-25P

Group 15.

22.

72.

SECTION V.Group 01.

03.

04.

05.

06.

15.

22.

72.

SECTION VI.

VII.

Page

Frame1501 Frame assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8Body Chassis or Hull and Accessory Items2 2 0 2 A c c e s s o r y i t e m s _ _ _ _ _ _ _ _ _ _ _ 9 2210 Data plates and instruction holders ------------------------------------------------- 10Dispensing and Servicing Equipment Components7202 Pumps and meters - - - - - - - - - - - - - - - - - - - - ---------------------- - - - - - - - - - - - - - - - - 117203 Valves, f ittings, nozzles - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 127204 Miscellaneous parts and accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13

REPAIR PARTS FOR DS, GS, AND DEPOT MAINTENANCEEngine01000101010201O4010501060107Fuel0301030403060308

Engine assembly - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16Crankcase, block, cylinder head -------------------------------------------------- 17Crankshaft - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18Pistons, connecting rods --- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18Valves, camshafts and timing system ---------------------------------------------- 18Engine lubrication system ------------------------------------------- 19Engine starting system ---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20

SystemCarburetor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21Air c leaner - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23Tanks, l ines, and fittings -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23Engine speed governor -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24

Exhaust System0 4 0 1 M u f f l e r a n d p i p e sCooling System0502 ShroudsElectrical System0 6 0 5 I g n i t i o n c o m p o n e n t s Frame1 5 0 1 F r a m e a s s e m b l yBody Chassis or Hull, and Accessory Items2 2 0 2 A c c e s s o r y i t e m s 2210 Data plates and instruction holders

Dispensing and Servicing Equipment Components7 2 0 2 P u m p s a n d m e t e r s7203 Valves, fittings, n o z z l e s 7204 Miscellaneous parts and accessories

28

SPECIAL TOOLS, TEST AND SUPPORT EQUIPMENT FOR DS,GS, AND DEPOT MAINTENANCE (NOT APPLICABLE)

INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBER,CROSS-REFERENCE TO INDEX NUMBER -----------------------------------------

26

26

27

2931

313335

52

ii

TM 5-4320-248-25P

SECTION I.

INTRODUCTION

1. Scope

This manual lists repair parts required forthe performance of organizational, direct sup-port, general support, and depot maintenanceof the pump.

2. General

a. The repair parts list is arranged as fol-lows:

(1)

(2)

Individual parts and major assembliesare listed alphabetically by item namewithin the numbered functionalgroups.Assembly components and subassem-blies are intended and listed alpha-betically by item name under majorassemblies.

b. This Repair Parts and Special Tools Listis divided into the following sections.

(1)

(2)

(3)

(4)

Prescribed Load Allowance (PLA)-Section II. A consolidated listing ofrepair parts quantitatively allocatedfor initial stockage at the organiza-tional level. This is a mandatory min-imum stockage allowance.Special Tools, Test and SupportEquipment-Section III. A list ofspecial tools test and support equip-ment authorized for the performanceof maintenance at the organizationallevel. (NOT APPLICABLE)Repair Parts-Section IV. A list of re-pair parts authorized for the per-formance of maintenance at the or-ganizational level.Repair Parts-Section V. A list of re-pair parts authorized for the per-formance of maintenance at the direct

(5)

(6)

support, general support, and depotlevel.Special Tools, Test and SupportEquipment—Section VI. A list ofspecial tools, test and support equip-ment authorized for the performanceof maintenance at the direct support,general support, and depot level.(NOT APPLICABLE)Federal Stock Number and ReferenceNumber Index—Section VII. A list ofFederal stock numbers followed byreference numbers, appearing in allthe listings, in ascending alphanumer-ic sequence cross-referenced to indexnumber.

3. Explanation of Columns

The following provides ancolumns in the tabular liststhrough VI.

explanation ofin Sections II

a. Source, Maintenance, and RecoverabilityCodes (SMR).

(1) Source Code. Indicates the selectionstatus and source for the listed item.Source codes used are:

Code ExplanationP Applied to repair parts which are stocked

in or supplied from DSA/GSA or Armysupply system, and authorized for use atindicated maintenance categories.

M Applied to repair parts which are not pro-cured or stocked but are to be manu-f actured at indicated maintenance cate-gories.

A Applied to assemblies which are not pro-cured or stocked as such but made upof two or more units, each of whichcarry individual stock numbers and de-scriptions and are procured and stockedand can be assembled by units at in-dicated maintenance categories

i i i

TM 5-4320-248-25P

Code

x

X1

X2

c

G

( 2 )

oFHD

(3)

ExplanationApplied to parts and assemblies which are

not procured or stocked, the mortalityof which is normally below that of theapplicable end item, and the failureof which should result in retirement ofthe end item from the supply system.

Applied to repair parts which are notprocured or stocked, the requirementfor which will be supplied by use of thenext higher assembly or components.

Applied to repair parts which are notstocked. The indicated maintenancecategory requiring such repair pintswill attempt to obtain them throughcannibalization; if not obtainablethrough cannibalization, such repairparts will be requisitioned with supporting jusitification through normalsupply channels.

Applied to repair parts authorized for lo-cal procurements. If not obtainablefrom local procurement, such repairparts will be requisitioned through nor-mal supply channels with a supportingstatement of nonavailibility from localprocurement.

Applied to major assemblies that are pro-cured with PEMA (Procurement Equip-ment Missile Army) funds for initialissue to be used as exchange assembliesat DSU and GSU maintenance level.These assemblies will not be stockedabove DSU and GSU Ievel or returnedto depot supply level.

Note. Source code and level of mainte-nance am not shown on common hardwareitems known to be readily available in Armysupply channel and through local procure-ment.

Maintenance Code. Indicates the low-est category of maintenance author-ized to install the listed item. Themaintenance level codes are:

ExplanationOrganizational maintenanceDirect support maintenanceGeneral support maintenanceDepot maintenance

Recoverability Code. Indicates wheth-er unserviceable items should be re-turned for recovery or salvage. Itemsnot coded are expendable. Recover-ability codes are:

CodeR

T

u

(4)

ExplanationApplied to repair parts and assemblies

which are economically repairable atDSU and GSU activities and normallyare furnished by supply on an exchangebasis.

Applied to high dollar value recoverablerepair parts which are subject to special handling and are issued on an ex-change basis. Such repair parts nor.really are repaired or overhauled at de-pot maintenance activities.

Applied to repair parts specifically se-lected for salvage by reclamation unitedbecause of precious metal content, criti-cal materials, high dollar value re-usable easings or castings.

This column also lists, below the SMRcode, an index number for each itemin ascending numerical sequence,which is used to locate items in thepublication when the Federal stocknumber and/or reference number isknown.

b. Federal Stock Number. Indicates the Fed-eral stock number for the item.

c. Description. Indicates the Federal itemname and any additional description of theitem required. A part number or other refer-ence number is followed by the applicable five.digit Federal supply code for manufacturers inparentheses.

d. Unit of Issue. Indicates the unit used as abasis for issue, e.g. ea, pr, ft, yd, etc.

h. Quantity Incorporated in Unit Pack. Indi-cates the actual quantity contained in the unitpack.

f. Quantity Incorporated in Unit. Indicatesthe quantity of the item used in the functionalgroup.

g. Fifteen-Day Organizational MaintenanceAllowances.

(1) The allowance columns are dividedinto four subcolumns. Indicated ineach subcolumn opposite the first ap-pearance of each item is the totalquantity of items authorized for thenumber of equipments supported. Subsequent appearances of the same itemwill have no entry in the allowancecolumns but will have in the description column a reference to the first ap-pearance of the item. Items authorized

Code

i v

TM 5-4320-248-25P

for use as required but not for initialstockage are identified with an-aster-isk in the allowance column,

(2) The quantitative allowances for or-ganizational level of maintenancerepresents one initial prescribed loadfor a 15-day period for the number ofequipments supported. Units and or-ganizations authorized additional pre-scribed loads will multiply the numberof prescribed loads authorized by thequantity of repair parts reflected inthe appropriate density column to ob-tain the total quantity of repair partsauthorized.

(3) Organizational units providing main-tenance for more than 100 of theseequipments shall determine the totalquantity of parts required by convert-ing the equipment quantity to a deci-mal factor by placing a decimal pointbefore the next to last digit of thenumber to indicate hundredths, andmultiplying the decimal factor by theparts quantity authorized in the 51-100 allowance column. Example, au-thorized allowance for 51–100 equip-ments is 12; for 140 equipments mul-tiply 12 by 1.40 or 16.80 rounded offto 17 parts required.

(4) Subsequent changes to allowances willbe limited as follows: No change inthe range of items is authorized. Ifadditional items are considered neces-sary, recommendation should be for-warded to U.S. Army Mobility Equip-ment Command for exception or re-vision to the allowance list. Revisionsto the range of items authorized willbe made by this Command based uponengineering experience, demand data,or TAERS information.

h. Thirty-Day DS/GS Allowances.(1) The allowance columns are divided

into three subcolumns. Indicated ineach subcolumn, opposite the first ap-pearance of each item, is the totalquantity of items authorized for thenumber of equipments supported,Subsequent appearance of the sameitem will have no entry in the allow-

ance column, but will have in the de-scription column a reference to thefirst appearance of the item. Itemsauthorized for use as required but notfor initial stockage are identified withan asterisk in the allowance column.

(2) The quantitative allowances for DS/GS levels of maintenance will repres-ent intial stockage for a 30-dayperiod for the number of equipmentssupported.

(3) Determination of the total quantity ofparts required for maintenance ofmore than 100 of these equipmentscan be accomplished by converting theequipment quantity to a decimal fac-tor by placing a decimal point beforethe next to last digit of the numberto indicate hundredths, and multiply-ing the decimal factor by the partsquantity authorized in the 51-100 al-lowance column. Example, authorizedallowance for 51–100 equipments is40; for 150 equipments multiply 40 by1.50 or 60 parts required.

i. One-Year Allowances Per 100 Equip-ments/Contingency Planning Purposes. Indi-cates opposite the first appearance of eachitem the total quantity required for distributionand contingency planning purposes. The rangeof items indicates total quantities of all author-ized items required to provide for adequatesupport of 100 equipments for one year.

j. Depot Maintenance Allowance Per 100Equipments. Indicates opposite the first ap-pearance of each item the total quantity au-thorized for depot maintenance of 100 equip-ments. Subsequent appearances of the sameitem will have no entry in this column, but willhave in the description column a reference tothe first appearance of the item. Items author-ized for use but not for initial stockage areidentified with an asterisk in the allowancecolumn.

k. Illustration.(1) Figure Number. Indicates the figure

number of the illustration in whichthe item is shown.

(2) Item Number. Indicates the calloutnumber to reference the item in theillustration.

v

TM 5-4320-248-25P

4. Special Information

a. Repair parts mortality has been based on1000 hours of operation per year.

b. Parts which require manufacture or as-sembly at a category higher than that author-ized for installation will indicate in the sourcecolumn the higher category.

c. The following publication pertains to thepump and its components:

TM 5-4320-248-Operator, organizational,15 direct support, gen-

eral support, anddepot maintenancemanual.

5. How to Locate Repair Parts

a. When Federal stock numbernumber is unknown:

or reference

(1)

(2)

(3)

(4)

First. Using the table of contents, de-termine the functional group withinwhich the repair part belongs.Second. Find the illustration coveringthe functional group to which the re-pair part belongs,Third. Identify the repair part on theillustration, and note the illustrationfigure and item number of the repairpart.Fourth. Using the Repair Parts List-ing, find the functional group towhich the repair part belongs and lo-cate the illustration figure and itemnumber noted on the illustration.

b. When Federal stock number or referencenumber is ‘known:

(1) First. Using the index of Federalstock numbers and reference num-bers, find the pertinent Federal Stocknumber or reference number, This in-

(2)

dex is in ascending alphanumeric se-quence cross-referenced to an indexnumber.

Second. Using the repair part listing,find the index number referenced inthe index of Federal stock numbersand reference numbers,

6. Abbreviations

GPM -----------------------------Gallons Per Minutehp --------------------------------horse powerin. ----------------------------inch, incheslg -----------------------------long, lengthmtg------------------------------------mountings t d - - - - - - - - - - - - - - - - s t a n d a r dthd -------------------------------------threadw/ ----------------------------------with

7. Federal Supply Codes for ManufacturersCode Manufacturers

08484 ---- Breeze Corporation Inc.08645 ---- Briggs and Stratton Corp.25500 ---- Goodyear Aircraft Corp.38508 ---- Marsh Instrument Co., Division of

Colorado Oil and Gas Corp.81718 ---- OPW Division of Dover Corp.88795 ---- Kenco Pump Division of American

Crucible Products Co.90005 ---- Bendix Corp., The Filter Division98906 ---- Military Stantdards

8. Recommendations for MaintenanceManual Improvements

Report of errors, omissions, and recommen-dations for improving this publication by theindividual user is encouraged. Reports shouldbe submitted on DA Form 2028 (RecommendedChanges to DA Publications) and forwarded di-rect to the Commanding General, U. S. ArmyMobility Equipment Command, ATTN:AMSME-MPP, 4300 Goodfellow Blvd., St.Louis, Mo. 63120,

vi

TM 5-4320-248-25P

(1)

Feded

numbm

28054m-0783

2805-77WZ2S2

29904174-5255

2w0483-79’12

29WMW-2U97

xw—~

WM424-0234

29!Z3+94-’S747

i’97@786-lW5

t7%&!l16-1883

i730460-0535

$3~42

W3io-872-l’m

J330+2&’75i17

SECTION IIPRESCRIBED LOAD ALLOWANCE

(2)

Description

useable on code

Group 01-ENGINE6MI0-ENGINE ASSEMBLY

GASKET SET: engine(08645) 2972’75

Group M06-ENGINE LUBRICATIONSYSTEM

GROMMET : breather C0V6T

(08645) 66578

Group 0107-ENGINE STARTINGSYSTEM

ROPE, ENGINE STARTER: 47 1/8 in. lg.(08645) 294534

Group 03-FUEL SYSTEM03011-CARBURETOR

CARBURETOR ASSEMBLY(0$645) 296734

0W4-AIR CLEANERFILTER ELEMENT, AIR INTAKE

(08&!5) 279670308-ENGINE SPEED GOIVERNOR

SPRING, CONTROL ROD(08645) 26855

SPRING, GOVERNOR LINK(08645) 260665

SPRING, GOVERNOR LEVER(08645) 260545

Group W-ELECTRICAL SYSTEM0605-IGNITION COMPONENTS

PARTS KIT, IGNITION: breaker peintsand cmdenuer ( W5 ) 294628

PLUG, SPARK W/GASKET(08645) CJ8

INSULATOR, PLATE: terminal;condenser lead (WM15) 66935

Group 22-CHASSIS OR HULL,AND ACK!ESSORY ITEMS

2202-ACXESS0R% ITEMSHOSE ASSEMBLY, DISCHARGE :

rubber w/cOupling (8$7’9’5) SX937GASKET

(81718) H6430MGroup 72-DISPENSING AND

SERVICING EQUIPMENTCOMPONENTS

7204-MISCELLANEOUSPARTS AND ACCESSORIES

CLAMP, HOSE(88795) QS200M28A

ELEMENT, FILTER(90005) 041420s

O-RING, 100 GPM GAGE(96906) MS2%16-249

~unitpack

*

*

2

*

*

*

*

*

*

2

*

*

*

*

2

*

(4)day org maint, alw

(b)6-20

*

*

2

*

*

*

*

●

2

2

*

*

2

*

E

2

2

2

4

2

*

*

*

*

D

4

2

*

2

*

4

e

2

2

8

2

2

2

2

2

4

8

2

!2

2

2

8

4

vii

SE

CT

ION

IV

1

GR

OU

P 06

6

GR

OU

P 15

8

GR

OU

P 22

9

GR

OU

P 72

11

GR

OU

P 01

SE

CT

ION

V

GR

P 0304 G

RP

0301 G

RP

0101 G

RP

0305 GR

P 0106

16

Group 0100

Group 0100

17

Group 0100

20

GR

OU

P 03

2

1

Group 0100

22

Group 0100

23

Group 0100

24

GR

OU

P 04

Group 05

26

GR

OU

P 06

27

GR

OU

P 15

28

GR

OU

P 22

29

GR

OU

P 72

31

ITEM FUNCTNO. GROUP

1 01052 01053 01054 01015 01016 0100

FIGURE No. 1 CYLINOER, VALVES AND CAMSHAFT

LEGEND TO PARTS, FIGURE 1

ITEM ITEM FUNCT ITEMNAME NO.

ITEM FUNCT ITEMGROUP NAME NO. GROUP NAME

TAPPET 7 0100 WASHER 13VALVE

0105 PIN8 0100 BOLT

VALVE14 0105

9 0101RETAINER

PLUG 15 0105CYLINDER AY 10 0105

ROTATOR CAPSPRING

SEAL16 0105

11 0105 SEATSPRING

NUT17 0105

12 0105 PINCAMSHAFT

37

FIGURE No. 2 CYLINDER COVER ANO GOVERNOR


ITEM FUNCTNO.

1

245678910111213141516

GROUP

0101010101010308030803080308030803080308010601060308030803080101

ITEMNAME

B0LTCOVERGASKETWASHERFOLLOWERRETAINERGEARBODYSCREWsHAFTCAPNIPPLESHAFTWASHERPINSEAL

38

FIGURE No. 3 PISTON, CONNECTING RoD AND CRANKSHAFT


ITEM FUNCT ITEMNO.

ITEM FUNCT ITEMGROUP NAME NO. GROUP NAME

1 0104 RING 6 0104 LOCK2 0104 PIN 7 01043 0104

BOLTPISTON AY 8 0104

4 0104DIPPER

RING SET 9 0102 CRANKSHAFT5 0104 ROD AY 10 0102 BEARING

3 9

ITEMNO.

1

2

3

4

5

6

7

4 0

FUNCTGROUP

0502

0107

0107

0502

0107

0107

0502

ITEMNAME

COVER

ROPE

SPRING

HOUSING

GRIP

PIN

SCREW

FIGURE No. 4 REWINDSTARTER, FLYWHEEL


ITEMNO.

8

9

10

11

12

13

14

FUNCTGROUP

0502

0107

0107

0107

0107

0107

0107

ITEMNAME

WASHER

PULLEY

BUMPER

SCREW

SCREEN

WASHER

WASHER

ITEMNO.

15

16

17

18

19

20

FUNCTGROUP

0107

0107

0107

0605

0605

0605

ITEMNAME

RATCHET

BEARING

HOUSING

WASHER

WASHER

FLYWHEEL AY

FIGURE No. 5 CRANKCASE BREATHER


I T E M F U N C T ITEM ITEM FUNCT ITEMNO. GROUP NAME NO. GROUP NAME

1 0502 SCREW 5 0106 GROMMET

2 0502 SHIELD 6 0106 TUBE

3 0106 GASKET 7 0106 GROMMET

4 0106 BREATHER 8 0106 BOLT

41


ITEM FUNCT ITEMNO. GROUP NAME

1 0304 SCREW

2 0304 AIR CLEANER

3 0304 FILTER ELEMENT

4 0304 GASKET

5 0301 SCREW

6 0301 GASKET

7 0301 CARBURETOR AY

8 0306 GASKET

9 0306 TANK

10 0306 SCREW

11 0306 CAP

12 0301 SCREW

FIGURE No. 6 FUEL TANK, CARBURETOR AND AIR CLEANER

4 2

ITEMNO.

1

2

3

4

5

6

7

8

9

10

FUNCTGROUP

0301

0301

0301

0301

0301

0301

0301

0301

0301

0301

FIGURE No. 7 CABuREToR


ITEM ITEMNAME NO.

SCREW 11

SPRING 12

SPRING 13

CAP 14

DIAPHRAGM 15

PIN 16

COVER 17

SCREW 18

SPRING 19

LINK

FUNCTGROUP

0301

0301

0301

0301

0301

0301

0301

0301

0301

ITEMNAME

CRANK

SCREW

VALVE

SPRING

WASHER

PACKING

NUT

GASKET

SEAT

4 3

FIGURE No. 8 MUFFLER AND GOVERNOR CONTROLS


ITEM FUNCTNO. GROUP

1 04012 04013 03084 03085 03086 03087 03088 03089 0308

ITEM ITEM FUNCTNAME NO. GROUP

LOCKNUTMUFFLERNUTSPRINGBRACKETRODLEVERWASHERSCREW

10 030811 030812 030813 030814 030815 030816 030817 0308

ITEMNAME

BUSHINGSCREWBRACKETSPRINGLINKSPRINGLEVERSCREW

4 4

ITEMNO.

FIGURE No. 9

FUNCT ITEMGROUP NAME

0101 BOLT0101 HEAD0605 PLUG0101 BOLT0605 LEAD0605 ARMATURE0502 DEFLECTOR

CYLINDER HEAD AND IGNITION COMPONENTS


ITEM FUNCT ITEM ITEM FUNCT ITEMNO. GROUP NAME NO. GROUP NAME

8 0605 SCREW 15 0605 CLAMP9 0605 COVER 16 0605 WIRE 10 0605 SCREW 17 0605 BOLT11 0605 SPRING l8 0605 WASHER12 0605 PARTS KIT 19 0605 INSULATOR13 0605 PLUNGER 20 0605 NUT14 0605 SCREW 21 0101 GASKET

45

46


1 1501 NUT

2 1501 SPACER

3 1501 BASE

FIGURE No. 10 BASKET AND FRAME



4 1501 SUPPORT

5 1501 BOLT

6 1501 NUT


7 1501 WASHER

8 1501 BASKET

9 1501 BOLT

Figure No. 11 HOSE



1 2202 HOSE

2 2202 HOSE

3 2202 CHAIN AY

4 2202 RING

.5 2202 CAP

6 2202 GASKET

7 2202 COUPLING

8 2202 CLAMP

9 2202 PLUG

10 2202 COUPLING

4 7

ITEM FUNCTNO. GROUP

1 7202

2 7202

3 7202

4 7202

5 7202

6 7202

7 7202

8 7202

9 7202

FIGURE No. 12 PUMP

ITEMNAME

ELBOW

HANDLE

PLATE

BOLT

IMPELLER

SEAL

SLEEVE

O RING

SEAT



10 7202 GASKET

11 7202 ADAPTER

12 7202 BOLT

13 7202 WASHER

14 7202 NUT

15 7202 WASHER

16 7202 STUD

17 7202 BOLT

18 7202 WASHER

ITEMNO.

19

20

21

22

23

24

25

26

27

FUNCTGROUP

7202

7202

7202

7202

7202

7202

7202

7202

7202

ITEMNAME

NUT

BOLT

PLUG

CAP AY

GASKET

NUT

COUPLING

CASING

NIPPLE

48

49

FIGURE No. 13 NOZZLE


1

2

3

4

5

6

7

8

9

10

11


7203 PLUG

7203 GASKET

7203 COUPLER

‘/203 NOZZLE

7203 SCREEN

7203 SPOUT

7203 CAP AY

7203 WIRE AY

7203 SCREW

7203 RING

7203 CHAIN

50

ITEM FUNCTNO. GROUP

1 7204

2 7204

3 7204

4 7204

5 7204

6 7204

F IGURE No. 14 M O N I T O R


ITEM ITEM FUNCT ITEMNAME NO. GROUP NAME

TEE 7 7204 GAGE

ADAPTER 8 7204 ADAPTER

GASKET 9 7204 CLAMP

CAP AY 10 7204 NOSE

NIPPLE 11 7204 PLUG AY

GAGE 12 7204 COUPLER

FIGURE No. 15 GAGE GO- No - Go



1 7204 ELEMENT

2 7204 CLAMP

3 7204 HOUSING

4 7204 O Ring

5 7204 COVER

51

Section VII. INDEX-FEDERAL STOCK NUMBER AND REFERENCE NUMBERCROSS-REFERENCE TO INDEX NUMBER

52

53

Section VII. INDEX - FEDERAL STOCK NUMBER AND REFERENCE NUMBERCROSS-REFERENCE TO INDEX NUMBER

T M 5 - 4 3 2 0 - 2 4 8 - 2 5 P

By Order of the Secretary of the Army:

HAROLD K. JOHNSON,General, United States Amy,

Official: Chief of Staff.

KENNETH G. WICKHAM,Major General, United States Army,The Adjutant General.

To be distributed in accordance with DA Form 12-25, Section I, requirements for Organizational Mainte-ance, Mobility Support Equipment for Pumps, Centrifugal, Petroleum.

55

TM 5-4320-248-25P

P I N : 0 0 8 4 7 6 - 0 0 0

This fine document...

Was brought to you by me:

Liberated Manuals -- free army and government manuals

Why do I do it? I am tired of sleazy CD-ROM sellers, who take publicly available information, slap “watermarks” and other junk on it, and sell it. Those masters of search engine manipulation make sure that their sites that sell free information, come up first in search engines. They did not create it... They did not even scan it... Why should they get your money? Why are not letting you give those free manuals to your friends?

I am setting this document FREE. This document was made by the US Government and is NOT protected by Copyright. Feel free to share, republish, sell and so on.

I am not asking you for donations, fees or handouts. If you can, please provide a link to liberatedmanuals.com, so that free manuals come up first in search engines:

<A HREF=http://www.liberatedmanuals.com/>Free Military and Government Manuals</A>

– SincerelyIgor Chudovhttp://igor.chudov.com/

– Chicago Machinery Movers

http://www.liberatedmanuals.com/

https://www.machinerymoverschicago.com/

http://igor.chudov.com/

http://www.liberatedmanuals.com/

tm 5-4320-248-25p - liberated · pdf filetm 5-4320-248-25p department of the ... ment missile...

Documents