tm 5-4930-218-24p lub trailer eng-3a

8/14/2019 TM 5-4930-218-24P LUB TRAILER ENG-3A

1/212

*TM 5-4930-218-24P

TECHNICAL MANUAL

UNIT, DIRECT SUPPORT ANDGENERAL SUPPORT MAINTENANCE REPAIR PARTS

AND SPECIAL TOOLS LIST(INCLUDING DEPOT MAINTENANCE REPAIR PARTS

AND SPECIAL TOOLS)

LUBRICATING AND SERVICING UNIT:POWER OPERATED, TRAILER

MOUNTED, 15 CFM COMPRESSOR,RECIPROCATING GASOLINE ENGINE

DRIVEN(ELLIOTT MACHINE WORKS, INC.MODEL ENGR3A)

NSN 493000-5482766

Approved for public release; distribution is unlimited.

q This manual supersedes TM 5493021824P, dated 15 October 1975.

HEADQUARTERS, DEPARTMENT OF THE ARMY12 JUNE 1991


2/212

CHANGE

NO. 1

TM 5-4930-218-24PC 1

HEADQUARTERSDEPARTMENT OF THE ARMY

WASHINGTON, D. C., 30 JUNE 1993

Unit, Direct Support and General SupportMaintenance Repair Parts and Special Tools List

(Including Depot Maintenance Repair Parts and Special Tools)

LUBRICATING AND SERVICING UNIT:POWER OPERATED, TRAILER MOUNTED, 15 CFM COMPRESSOR,

RECIPROCATING GASOLINE ENGINE DRIVEN(ELLIOTT MACHINE WORKS, INC. MODEL ENGR3A)

NSN 4930-00-548-2766

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited

TM 5-4930-218-24P, 12 June 1991, is changed as follows:

1. Remove and insert pages as indicated below. New or changed text material is indicated by avertical bar in the margin. An illustration change is indicated by a miniature pointing hand.

Remove pages Insert pages

3 6 - 1 a n d f i g 3 7 38-1 and fig 37

2. Retain this sheet in front of manual for reference purposes.

By Order of the Secretary of the Army:

GORDON R. SULLIVANGeneral, United States Army

Official: Chief of Staff

MILTON H. HAMILTONAdministrative Assistant to the

Secretary of the Army04423

DISTRIBUTION:To be distributed in accordance with DA Form 1225E, block no. 1178, requirements forTM 5493021824P.


3/212

* T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

TECHNICAL MANUAL

NO. 5-4930-218-24P

HEADQUARTERS,DEPARTMENT OF THE ARMY

WASHINGTON, D. C., 12 JUNE 1991

UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCEREPAIR PARTS AND SPECIAL TOOLS LIST

(INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLSfor

LUBRICATING AND SERVICING UNIT: POWER OPERATED, TRAILER MOUNTED,5 CFM COMPRESSOR, RECIPROCATING GASOLINE ENGINE DRIVEN

(ELLIOIT MACHINE WORKS, INC. MODEL ENGR3A)NSN 4930-00-54&2766

Current as of 28 November 1990

REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS

You can help improve this manual, If you find any mistakes or if you know of a way to improve the procedures,please let us know. Mail your letter, DA Form 2028 (Recommended Changes to Publications and Blank Forms) orDA Form 20282 located in the back of this manual directly to: Commander, U.S. Army Troop Support Command,ATTN: AMSTRMMTS, 4300 Goodfellow Boulevard, St. Louis, MO 631 201 798, A reply will be furnisheddirectly to you.

Page

Section I.

Section Il.Group 01Group 02Group 03Group 04

Group 05Group 06Group 07

Approved for public release; distribution is unlimited

TABLE OF CONTENTS

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Repair Parts ListEnclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Frame, Skid, Light Reel, and Tool Box . . . . . . . . . . . . . . . . . . . . .Transfer Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hoses, Lines, and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Air Hoses* and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Air Reservoir Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Engine Oil Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Chassis Lube Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Gear Oil Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Alcohol Dispenser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Air Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Reel AssembliesEngine Oil Hose Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Gear Oil Hose Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Air Hose Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Grease Hose Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

1 1

2131

41516-171819-110-1

1111 21

13-114-1

IllUs/

Figure

123

45678910

11

121314

This manual supersedes TM 5-4930-218-24P, dated 15 October 1975.I


4/212

TM 5-4930-218-24P

Group 08

Group 09Group 10

Group 11Group 12Group 13Group 14

Group 15


Group 19Group 20Group 21Group 22

Group 23

Group 24Group 25Group 26Group 27Group 28

Page

Control ValvesEngine Oil Control Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-1

Grease Control Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-1

Gear Oil Control Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-1Battery Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-1

Accessories and FittingsAccessories and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-1

Accessories and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-1



Fuel Tank and Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-1Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-1

Exhaust Diverters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-1

Engine and ComponentsThrottle Control and Generator . . . . . . . . . . . . . . . . . . . . . . . . . . 26-1

Engine Mounting and Accessories . . . . . . . . . . . . . . . . . . . . . . . 27-1Engine and Mounting Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-1

Compress or AssemblyAir Compressor Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-1

Air Compressor Manifolds, Valves, Tubes, and Fittings . . . . . . . 30-1Air Compressor Intake Muffler . . . . . . . . . . . . . . . . . . . . . . . . . . 31-1

Air Compressor Unloader and lntake Valves . . . . . . . . . . . . . . . 32-1

Ai rCompressor Discharge Valves . . . . . . . . . . . . . . . . . . . . . . . 33-1

Air Compressor Crankcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-1Air Compress or Crankshaft and Pistons . . . . . . . . . . . . . . . . . . . 35-1

Lube Tank Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-1Regulator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-1Lubricant Pump Assemblies

Low Pressure Lubricant Pump, Top Section . . . . . . . . . . . . . . . . 38-1

Low Pressure Lubricant Pump, Middle Section . . . . . . . . . . . . . 39-1Low Pressure Lubricant Pump, Lower Section . . . . . . . . . . . . . . 40-1High Pressure Lubricant Pump,Top Section . . . . . . . . . . . . . . . 41-1

High Pressure Lubricant Pump, Middle Section . . . . . . . . . . . . . 42-1

High Pressure Lubricant Pump, Lower Section . . . . . . . . . . . . . 43-1

Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-1

Clearance Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-1

Blackout Stoplights and Taillights . . . . . . . . . . . . . . . . . . . . . . . . . . 46-1

Electrical Junction Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47-1

Air and Hydraulic Brake SystemAir Brake Lines and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-1

Air Coupler Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-1

Air Brake Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-1Air Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-1Brake Air Chamber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-1

Brake Master Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53-1

Air Brake Relay Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54-1

WheeIs, Hub, and Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-1

Illust/ Fgure

1516

1718

19

2021

22232425

26

2728

293031

323334353637

38394041

424344454647

48495051

52535455

ii


5/212

TM 5-4930-218-24P



Section Il l.

Section IV.

Suspension System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Brake Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wheel Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Landing Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Trailer

Trailer Frame and Accessories . . . . . . . . . . . . . . . . . . . . . . . .Trailer Towing, Tiedown, and Reflectors . . . . . . . . . . . . . . . . .

Special Tools List (nonapplicable)

Cross Reference IndexesNational Stock Number Index . . . . . . . . . . . . . . . . . . . . . . . . .Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Figure and item Number index . . . . . . . . . . . . . . . . . . . . . . . .

Page

56157158159-160-1

61-1621

l lI7136

lllus/ Figure

5657585960

61

62

iii/(iv blank)


6/212

TM 5-4930-218-24P

UNIT, DIRECT SUPPORTAND GENERAL SUPPORT

MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST

SECTION I. INTRODUCTION

1. SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test,measurement, and diagnostic equipment (TMDE); and other special support equipment required forperformance of unit, direct support, and general support maintenance of the Lubricating and Service Unit,Model ENGR-3A. It authorizes the requisitioning, issue, and disposition of spares, repair parts andspecial tools as indicated by the source, maintenance and recoverability (SMR) codes.

2. GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List isdivided into the following sections:

a. Section Il. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for usein the performance of maintenance. The list also includes parts which must be removed for replacementof the authorized parts. Parts lists are composed of functional groups in ascending alphanumericsequence, with the parts in each group listed in ascending figure and item number sequence. Bulkmaterials are listed in item name sequence. Repair parts kits are listed separately in their own functionalgroup within Section il. Repair parts for repairable special tools are also listed in this section. Items listedare shown on the associated illustration(s) /figure(s).

b. Section III. Special Tools List. A list of special tools, special TMDE, and other special supportequipment authorized by this RPSTL (as indicated by Basis of issue (BOI) information in DESCRIPTIONAND USABLE ON CODE column) for the performance of maintenance.

c. Section IV . Cross-references Indexes. A list, in National Item Identification Number (NIIN)sequence, of ail National stock numbered items appearing in the listing, followed by a list in alphanumericsequence of all part numbers appearing in the listings. National stock numbers and part numbers arecross referenced to each illustration figure and item number appearance. The figure and item numberindex lists figure and item number in alphanumeric sequence and cross references NSN, CAGEC and

part number.3. EXPLANATION OF COLUMNS (SECTIONS II AND III).

a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in theillustration.

b. SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a5position code containing supply/requisitioning information, maintenance category authorizationcriteria, and disposition instruction, as shown in the following breakout:

1


7/212

TM 5-4930-218-24P

* Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenancetasks of the Repair function in a use/user environment in order to restore serviceability to a failed item.

(1) Source Code. The source code tells you how to get an item needed for maintenance,repair, or overhaul of an end item/equipment. Explanations of source codes follows:

Code

PAPBPC**PDPEPFPG

KD

KFKB

Explanation

Stocked items; use the applicable NSN to request/requisition items with thesesource codes. They are authorized to the category indicated by the codeentered in the 3rd position of the SMR code.

**NOTE: Items coded PC are subject to deterioration.

Items with these codes are not to be requested/requisitioned individually. They

are part of a kit which is authorized to the maintenance category indicated in the3rd position of the SMR code. The complete kit must be requisitioned andapplied.

MO (Made at org AVUMLevel)

MF (Made at DS/AVUMLevel)

MH (Made at GS Level)ML (Made at Specialized

Repair Activity (SRA))MD (Made at Depot)

Items with these codes are not to be requested/requisi-tioned individually. They must be made from bulkmaterial which is identified by the part number in theDESCRIPTION and USABLE ON CODE (UOC) columnand listed in the Bulk Material group of the repair parts listin this RPSTL. If the item is authorized to you by the 3rdposition code of the SMR code, but the source codeindicates it is made at a higher level, order the item fromthe higher level of maintenance.

AO (Assembled by org/AVUMLevel)

Items with these codes are not to be requested/

AF (Assembled by DS/AVIMrequisitioned individually. The parts that make upthe assembled item must be requisitioned or

LevelA H (Assembled by GS

f a b r i c a t e d a n d a s s e m b l e d a t t h e l e v e l o f

Category)maintenance indicated by the source code. If the

AL (Assembled by SRA)3rd position code of the SMR code authorizes you

AD (Assembled by Depot)to replace the item, but the source code indicatesthe items are assembled at a higher level, order theitem from the higher level of maintenance.

X A

X B

X C

X D

Do not requisition XA -coded item. Order its next higher assembly. (Also, refer to theNOTE below.)If an XB item is not available from salvage, order it using the CAGEC and part numbergiven.Installation drawing, diagram, instruction sheet, field service drawing, that is identified byReciprocating Compressor manufacturers part number.Item is not stocked. Order anthe CAGEC and part number

XD -coded item through normal supply channels usinggiven if no NSN is available.

2


8/212

TM 5-4930-218-24P

NOTE

Cannibalization or controlled exchange, when authorized, may be used asa source of supply for items with the above source codes, except for thosesource coded XA" or those aircraft support items restricted byrequirements of AR 7501.

(2) Maintenance Code. Maintenance codes tells you the level(s) of maintenance authorizedto USE and REPAIR support items. The maintenance codes are entered in the third and fourth positionsof the SMR code as follows:

(a) The maintenance code entered in the third position tells you the lowest maintenancelevel authorized to remove, replace, and use an item. The maintenance code entered in the third positionwill indicate authorization to one of the following levels of maintenance.

Code Application/Explanation

C Crew or operator maintenance done within organizational or aviation unit maintenance.

O Organizational or aviation unit category can remove, replace, and use the item.

F Direct support or aviation intermediate level can remove, replace, and use the item

H General support level can remove, replace, and use the item.

L Specialized repair activity can remove, replace, and use the item,

D Depot level can remove, replace, and use the item,

(b) The maintenance code entered in the fourth position tells whether or not the item is tobe repaired and identifies the lowest maintenance level with the capability to do complete repair (i.e. ,perform all authorized repair functions.) NOTE: Some limited repair may be done on the item at a lower

level of maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes. Thisposition will contain one of the following maintenance codes.

Code Application/Explanation

O Organizational or (aviation unit) is the lowest level that can do complete repair of the item.

F Direct support or aviation intermediate is the lowest level that can do complete repair of the item.

H General Support is the lowest level that can do complete repair of the item.

L Specialized repair activity is the lowest level that can do complete repair of the item.

D Depot is the lowest level that can do complete repair of the item.

Z Nonreparable. No repair is authorized.

B No repair is authorized, (No parts or special tools are authorized for the maintenance of a B" codeditem). However, the item may be reconditioned by adjusting, lubricating, etc., at the user level.

(3) Recoverability Code. Recoverability codes are assigned to items to indicate the. disposition action on unserviceable items. The recoverability code is entered in the fifth position of the

SMR Code as follows:

3


9/212

TM 5-4930-218-24P

RecoverabilityCodes Application/Explanation

Z Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenanceshown in 3d position of SMR Code.

O Reparable item. When not economically reparable, condemn and dispose of the item at organizationalor aviation unit level

F Reparable item. When uneconomically reparable, condemn and dispose of the item at the directsupport or aviation intermediate level

H Reparable item. When uneconomically reparable, condemn and dispose of the item at the generalsupport level.

D Reparable item. When beyond lower level repair capability, return to depot. Condemnation anddisposal of item not authorized below depot level.

L Reparable item. Condemnation and disposal not authorized below specialized repair activity (SRA).

A Item requires special handling or condemnation procedures because of specific reasons (e.g.,precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriatemanuals/directives for specific instructions.

c. CAGEC (Column (3)). The Commercial and Government Entity Code (CAGEC) is a 5-digitnumeric code which is used to identify the manufacturer, distributor, or Government agency, etc., thatsupplies the item.

d. PART NUMBER (Column (4)). Indicates the primary number used by the manufacturer,(individual, company, firm, corporation, or Government activity), which controls the design andcharacteristics of the item by means of its engineering drawings, specifications standards, and inspectionrequirements to identify an item or range of items.

NOTE

When you use an NSN to requisition an item, the item you receive mayhave a different part number from the part ordered.

e. DESCRIPTION AND USABLE ON CODE (UOC) (Column (5). This column includes thefollowing information:

(1) The Federal item name and, when required, a minimum description to identify the item.

(2) The physical security classification of the item is indicated by the parenthetical entry, e.g.,PhySec C1 Confidential, Phy Sec C1 (S) Secret, Phy Sec C1 (T) Top Secret.

(3) Items that are included in kits and sets are listed below the name of the kit or set.

(4) Spare/repair parts that make up an assembled item are listed immediately following theassembled item line entry.

(5) Part numbers for bulk materials are referenced in this column in the line item entry for theitem to be manufactured/fabricated.

(6) When the item is not used with all serial numbers of the same model, the effective serialnumbers are shown on the last line(s) of the description (before UOC).

4


10/212

TM 5-4930-218-24P

(7) The usable on code, when applicable (se e paragraph 5, Special Information).

(8) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in theentry for each special tool, special TM DE, and other special support equipment. When density ofequipments supported exceeds density spread indicated in the basis of issue, the total authorization isincreased proportionately.

(9) The statement END OF FIGURE appears just below the last item description in Column5 for a given figure in both Section II and Section Il l.

(1 O) The indenture, shown as dots appearing before the repair part, indicates that the item is arepair part of the next higher assembly.

f. QTY (Column (6)). The QTY (quantity per figure column) indicates the quantity of the itemused in the breakout shown on the illustration figure, which is prepared for a functional group,subfunctional group, or an assembly. A V appearing in this column in lieu of a quantity indicates that thequantity is variable and may vary from application to application.

4. EXPLANATION OF COLUMNS (SECTION IV).

a. NATIONAL STOCK NUMBER (NSN) INDEX.

(1) STOCK NUMBER column. This column lists the NSN by National item identificationnumber (NIIN) sequence. The NIIN consists of the last nine digits of the NSN, i.e.

NSN

5305-015741467

NIIN

When using this column to locate an item, ignore the first 4 digits of the NSN. However, the complete NSNshould be used when ordering items by stock number.

( 2 ) F I G . c o l u m n . This column lists the number of the figure where the item isidentified/located. The figures are in numerical order in Section II and Section Ill.

(3) ITEM column. The item number identifies the item associated with the figure listed in theadjacent FIG. column, This item is also identified by the NSN listed on the same line.

b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascendingalphanumeric sequence (i e., vertical arrangement of letter and number combination which places thefirst letter or digit of each group in order A through Z, followed by the numbers O through 9 and eachfollowing letter or digit in like order).

(1) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digit

numeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies theitem.

(2) PART NUMBER column. Indicates the primary number used by the manufacturer(individual, firm, corporation, or Government activity), which controls the design and characteristics of theitem by means of its engineering drawings, specifications standards, and inspection requirements toidentify an item or range of items.

(3) STOCK NUMBER column. This column Iists the NSN for the associated part number andmanufacturer identified in the PART NUMBER and CAGEC columns to the left.

5


11/212

TM 5-4930-218-24P

(4) FIG. column. This column lists the number of the figure where the item isidentified/located in Sections II and Ill.

(5) ITEM column. The item number is that number assigned to the item as it appears in thefigure referenced in adjacent figure number column.

c. FIGURE AND ITEM NUMBER INDEX.

(1) FIG. column. This column lists the number of the figure where the item isidentified/located in Section II and Ill.

(2) ITEM column. The item number is that number assigned to the item as it appears in thefigure referenced in the adjacent figure number column.

(3) STOCK NUMBER column. This column lists the NSN for the item.

(4) CAGEC column. The Commercial and Government Entity Code (CAGEC) is a 5-digitnumeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies theitem.

(5) PART NUMBER column. Indicates the primary number used by the manufacturer(individual, firm, corporation, or Government activity), which controls the design and characteristics of theitem by means of its engineering drawings, specifications standards, and inspection requirements toidentify an item or range of items.

5. SPECIAL INFORMATION.

a. USABLE ON CODE. The usable on code appears in the lower corner of the Descriptioncolumn heading. Usable on codes are shown as UOC: . . . . . . . in the Description Column (justified left) onthe last line applicable item description/nomenclature. Uncoded items are applicable to all models.

b. ASSOCIATED PUBLICATIONS. The publications listed below pertains to the Lubricating andService Unit, Model ENGR3A and its components.

Publication Short Title

TM 5-4930-21 814 Lubricating and Servicing Unit

D MW R 5- 4 93 0 - 21 8 Lubricating and Servicing Unit

T M 5 - 2 8 0 5 - 2 0 3 - 2 4 P Gasoline Engine, model 4A032-2

6. HOW TO LOCATE REPAIR PARTS.

a. When National Stock Number or Part Number is NOT Known.

(1) First. Using the table of contents, determine the assembly group or subassembly groupto which the item belongs. This is necessary since figures are prepared for assembly groups andsubassembly groups, and listings are divided into the same groups.

(2) Second. Find the figure covering the assembly group or subassembly group to which theitem belongs.

6


12/212

TM 5-4930-218-24P

(3) Third. Identify the item on the figure and note the item number.

(4) Fourth. Refer to the Repair Parts List for the figure to find the part number for the itemnumber noted on the figure.

(5) Fifth. Refer to the Part Number Index to find the NSN, if assigned.

b. When National Stock Number or Part Number is Known.

(1) First. Using the Index of National Stock Numbers and Part Numbers, find the pertinentNational Stock Number or Part Number. The NSN index is in National Item Identification Number (NIIN)sequence (see c-4a.(1)). The part numbers in the Part Number index are listed in ascendingalphanumeric sequence (see paragraph c-4.b). Both indexes crossreference you to the illustrationfigure and item number of the item you are looking for.

(2) Second. After finding the figure and item number, verify that the item is the one you arelooking for, then locate the item number in the repair parts list for the figure.

7. ABBREVIATIONS. Abbreviations used in this manual are listed in MlL-STD-12.

A B B R E V I A T I O N S E X P L A N A T I O N

BUNA N RBR BUNA N RubberINTLEXT InternalExternalN P T National Pipe ThreadU N C Unified Coarse Thread

U N F Unified Fine Thread

U N S Unified Special Thread

7/(8 blank)


13/212

SECTION II TM 5-4930-218-24P

Figure 1. Enclosure.


14/212


F I G . 1 ENCLOSURE

1-1


15/212


Figure 2. Frame, Skid, Light Reel, and Tool Box.


16/212


F I G . 2 FRAME, SKID, LIGHT REEL,AND TOOL BOX

2 - 1


17/212


Figure 3. Transfer Pump (Sheet 1 of 2).


18/212


Figure 3. Transfer Pump (Sheet 2 of 2).


19/212


F I G . 3 TRANSFER PUMP

31


20/212


3- 2


21/212


Figure 4. Air Hoses and Fittings.


22/212

TM 5-4930-218-24PSECTION II

F I G . 4 AIR HOSES AND FITTINGS

4 - 1


23/212


Figure 5. Air Reservoirs Lines.


24/212


F I G . 5 AIR RESERVOIR LINES

5 - 1


25/212


Figure 6. Engine Oil Lines.


26/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

F I G. 6 ENGINE OIL LINES

6 - 1


27/212


Figure 7. Chassis Lube Lines.


28/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

F I G . 7 CHASSIS LUBE LINES

7 - 1


29/212


Figure 8. Gear Oil Lines.


30/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

F I G . 8 GEAR OIL LINES

8 - 1


31/212


Figure 9. Alcohol Dispenser.


32/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

F I G . 9 ALCOHOL DISPENSER

9 - 1


33/212


Figure 10 . Air Valve.


34/212

SECTION II TM5-4930-218-24P

F I G . 1 0 AIR VALVE

1 0 - 1


35/212


Figure 11. Engine Oil Hose Reel.


36/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

F I G . 11 ENGINE OIL HOSE REEL

111


37/212


Figure 12. Gear Oil Hose Reel.


38/212


F I G . 1 2 GEAR OIL HOSE REEL

1 2 - 1


39/212


Figure 13. Air Hose Reel.


40/212


F I G . 1 3 AIR HOSE REEL

1 3 - 1


41/212


Figure 14. Grease Hose Reel.


42/212

SECTION I I T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

F I G . 1 4 GREASE HOSE REEL

14-1


43/212


Figure 15. Engine Oil Control Valve.


44/212


FIG . 15 ENGINE OIL CONTROL VALVE

1 5 - 1


45/212


Figure 16. Grease Control Valve.


46/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

FIG. 16 GREASE CONTROL VALVE

16-1


47/212


Figure 17. Gear Oil ControL Valve.


48/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

FIG. 17 GEAR OIL CONTROL VALVE

1 7 - 1


49/212


Figure 18. Battery Box.


50/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

FIG. 18 BATTERY BOX

1 8 - 1


51/212


Figure 19. Accessories and Fittings.


52/212


F I G . 1 9 ACCESSORIES AND FITTINGS

19-1


53/212




54/212


FIG. 20 ACCESSORIES AND FITTINGS

2 0 - 1


55/212

SECTION II TM S-4930-218-24P



56/212

SECTION II TM5-4930218-24P

F I G . 2 1 ACCESSORIES AND FITTINGS

2 1 - 1


57/212


Figure 22. Lubricating Unit.


58/212


59/212


Figure 23. Fuel Tank and Lines.


60/212


61/212


Figure 24. Control Panel.


62/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

FIG. 24 CONTROL PANEL

2 4 - 1


63/212


64/212


FIG. 25 EXHAUST DIVERTERS

25-1


65/212


Figure 26. Throttle Control and Generator.


66/212


FIG. 26 THROTTLE CONTROL ANDGENERATOR

2 6 - 1


67/212


68/212


FIG. 27 ENGINE MOUNTING ANDACCESSORIES

27-1


69/212


Figure 28. Engine and Mounting Base.


70/212


F I G . 2 8 ENGINE AND MOUNTING BASE

28-1


71/212


Figure 29. Air Compressor Assembly.


72/212

TM5-4930-218-24PSECTION II

FIG. 29 AIR COMPRESSOR ASSEMBLY

29-1


73/212


Figure 30. Air Compressor Manifolds, Valves, Tubes, and Fittings.


74/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

F I G . 3 0 AIR COMPRESSOR MANIFOLDS,VALVES, TUBES, AND FITTINGS

3 0 - 1


75/212


Figure 31. Air Compressor Intake Muffler.


76/212


77/212


78/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

FIG. AIR COMPRESSOR UNLOADERAND INTAKE VALVES

3 2 - 1


79/212


Figure 33. Air Compressor. Discharge Valves.


80/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

F I G . 3 3 AIR COMPRESSOR DISCHARGEVALVES

331


81/212


82/212


83/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

3 4 - 2


84/212


Figure 35. Air Compressor Crankshaft and Pistons.


85/212

T M 5 - 4 9 3 0 - 2 1 8 - 2 4 PSECTION II

FIG. 35 AIR COMPRESSOR CRANKSHAFTAND POSTONS

3 5 - 1


86/212


Figure 36. Lube Tank Assembly.


87/212

SECTION II TM 5-4930-218-24P CO 1

(1) (2) (3) (4)ITEM SMR PARTNO CODE CAGEC NUMBER

(5)

DESCRIPTION AND USABLE ON CODES (UOC)

GROUP 16 LUBE TANK ASSEMBLY

FIG. 36 LUBE TANK ASSEMBLY

(6)

QTY

36-1


88/212


89/212

SECTION II TM5-4930-218-24P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

ITEM SMR PARTNO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY

GROUP 17 REGULATOR ASSEMBLY

F I G . 3 7 REGULATOR ASSEMBLY

37-1


90/212


Figure 38. Low Pressure Lubricant Pump, Top Section.


91/212

T M 5 - 4 9 3 0 - 2 1 8 - 2 4 PSECTION II( 1 ) ( 2 ) ( 3 )

ITEM SMRNO CODE CAGEC

( 4 )PART

NUMBER

( 5 ) ( 6 )

DESCRIPTION AND USABLE ON CODES (UOC) QTY

GROUP 18 LUBRICANT PUMP ASSEMBLIES

F I G . 3 8 LOW PRESSURE LUBRICANTPUMP, TOP SECTION

3 8 - 1


92/212


Figure 39. Low Pressure Lubricant Pump, Middle Section


93/212


94/212


95/212

SECTION II( 1 ) ( 2 ) ( 3 )


T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 4 ) ( 5 ) ( 6 )

PARTNUMBER DESCRIPTION AND USABLE ON CODES (UOC) QTY


FI G. 40 LOW PRESSURE LUBRICANTPUMP, LOWER SECTION

4 0 - 1


96/212


Figure 41. High Pressure Lubricant Pump, Top Section.


97/212

SECTION II TM5-4930-218-24P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )




F I G . 4 1 HIGH PRESSURE LUBRICANTPUMP, TOP SECTION

4 1 - 1


98/212


Figure 42. High Pressure Lubricant Pump, Middle Section.


99/212

T M 5 - 4 9 3 0 - 2 1 8 - 2 4 PSECTION II( 1 ) ( 2 ) ( 3 )


( 4 )PART

NUMBER

( 5 ) ( 6 )



F I G . 4 2 HIGH PRESSURE LUBRICANTPUMP, MIDDLE SECTION

4 2 - 1


100/212


101/212


102/212


103/212

T M 5 - 4 9 3 0 - 2 1 8 - 2 4 PSECTION II( 1 ) (2) ( 3 )


( 4 )PART

NUMBER

( 5 ) ( 6 )


GROUP 19 ELECTRICAL SYSTEM

F I G . 4 4 ELECTRICAL SYSTEM

4 4 - 1


104/212


Figure 45. Clearance Lights.


105/212

TM5-4930-218-24PSECTION II( 1 ) ( 2 ) ( 3 )


( 4 )PART

NUMBER

( 5 ) ( 6 )


GROUP 20 CLEARANCE LIGHTS

F I G . 4 5 CLEARANCE LIGHTS

4 5 - 1


106/212


Figure 46. Blackout Stoplights and Taillights.


107/212

SECTION II( 1 ) ( 2 ) ( 3 )


T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 4 )

PARTNUMBER

( 5 )

DESCRIPTION AND USABLE ON CODES (UOC)

GROUP 21 BLACKOUT STOPLIGHTS ANDTAILLIGHTS

FI G. 46 BLACKOUT STOPLIGHTS ANDTAILLIGHTS

( 6 )

QTY

4 6 - 1


108/212


Figure 47. Electrical Junction Box.


109/212

SECTION II( 1 ) ( 2 ) ( 3 )


TM5-4930-218-24P( 4 ) ( 5 )

PARTNUMBER DESCRIPTION AND USABLE ON C

GROUP 22 ELECTRICAL JUNCT

F I G . 4 7 ELECTRICAL JUNCTIO


110/212


Figure 48. Air Brake Lines and Fittings.


111/212

SECTION II( 1 ) ( 2 ) ( 3 )


T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 4 )

PARTNUMBER

( 5 ) ( 6 )


GROUP 23 AIR AND HYDRAULIC BRAKESYSTEM

F I G . 4 8 AIR BRAKE LINES ANDFITTINGS

4 8 - 1


112/212


Figure 49. Air Coupler Lines.


113/212

SECTION II( 1 ) ( 2 ) ( 3 )


TM5-4930-218-24P( 4 ) ( 5 ) ( 6 )



F I G . 4 9 AIR COUPLER LINES

4 9 - 1


114/212


Figure 50. Air Brake Components.


115/212

SECTION II( 1 ) ( 2 ) ( 3 )


TM5-4930-218-24P( 4 ) ( 5 ) ( 6 )



F I G . 5 0 AIR BRAKE COMPONENTS

501


116/212


Figure 51 . Air Fitter.


117/212

SECTION II( 1 ) ( 2 ) ( 3 )


T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 4 ) ( 5 ) ( 6 )


GROUP 24 A IR FI LT ER

F I G . 5 1 AIR FILTER

5 1 - 1


118/212


Figure 52. Brake Air Chamber.


119/212

SECTION II( 1 ) ( 2 ) ( 3 )


TM5-4930-218-24P( 4 ) ( 5 ) ( 6 )


GROUP 25 BRAKE AIR CHAMBER

F I G . 5 2 BRAKE AIR CHAMBER

52-1


120/212


Figure 53. Brake Master Cylinder.


121/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


GROUP 26 BRAKE MASTER CYLINDER

F I G . 5 3 BRAKE MASTER CYLINDER

5 3 - 1


122/212


Figure 54. Air Brake Relay Valve.


123/212

SECTION II TM5-4930-218-24P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


GROUP 27 AIR BRAKE RELAY VALVE

FIG. 54 AIR BRAKE RELAY VALVE

5 4 - 1


124/212

SECTION II TM 5 -4 93 0 -2 18 - 24 P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


5 4 - 2


125/212


Figure 55. Wheels, Hub, and Drum.


126/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


GROUP 28 WHEEELS, HUB, AND DRUM

FI G. 55 WHEELS, HUB, AND DRUM

551


127/212


Figure 56. Suspension System.


128/212

SECTION II TM 5-4930-218-24P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )



GROUP 29 SUSPENSION SYSTEM

F I G . 5 6 SUSPENSION SYSTEM

5 6 - 1


129/212


Figure 57. Axle.


130/212

SECTION II TM5-4930-218-24P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


GROUP 30 AXLE

F I G . 5 7 A X L E

5 7 - 1


131/212


Figure 58. Brake Assembly.


132/212

SECTION II( 1 ) ( 2 ) ( 3 )


T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 4 ) ( 5 ) ( 6 )


GROUP 31 BRAKE ASSEMBLY

F I G . 5 8 BRAKE ASSEMBLY

5 8 - 1


133/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


5 8 - 2


134/212


Figure 59. Wheel Cylinder.


135/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


GROUP 32 WHEEL CYLINDER

F I G . 5 9 WHEEL CYLINDER

5 9 - 1


136/212


Figure 60. Landing Gear.


137/212

SECTION II TM5-4930-218-24P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


GROUP 33 LANDING GEAR

F I G . 6 0 LANDING GEAR

6 0 - 1


138/212


Figure 61. Trailer Frame and Accessories.


139/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )


GROUP 34 TRAILER

F I G . 6 1 TRAILER FRAME ANDACCESSORIES

611


140/212


Figure 62. Trailer Towing, Tiedown, and Reflectors.


141/212

SECTION II T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P( 1 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 6 )

ITEM SMR PARTNO CODE CAGEC NUMBER DESCRIPTION AND USABLE ON CODES(UOC) QTY

FIG. 62 TRAILER TOWING, TIEDOWN,

621/( 622 blank)


142/212

TM 5-4930-218-24P

S e c t i o n I l l . S P E C I A L T O O L S L I S T

(Not Applicable)


143/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

CROSS-REFERENCE INDEXES

I - 1


144/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P


NATIONAL STOCK NUMBER INDEX

I - 2


145/212

S E CT I ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P



I - 3


146/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P



I - 4


147/212

S EC TI ON IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P



I - 5


148/212


149/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P


I - 7


150/212

S E CT I ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 8


151/212

SE CTI ON IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P


PART NUMBER INDEX

I - 9


152/212

S EC TI ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 0


153/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 1


154/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 2


155/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 3


156/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 4


157/212

S E C T I ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 5


158/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 6


159/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 7


160/212

S E CT I ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

CROSSREFERENCE INDEXES

PART NUMBER INDEX

I - 1 8


161/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 1 9


162/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 0


163/212


164/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 2


165/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 3


166/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 4


167/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 5


168/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 6


169/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 7


170/212

SE CTI ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 8


171/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 2 9


172/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 3 0


173/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 3 1


174/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 3 2


175/212


176/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 3 4


177/212


178/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 3 6


179/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 3 7


180/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P


FIGURE AND ITEM NUMBER INDEX

I - 3 8


181/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P



I - 3 9


182/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P



I - 4 0


183/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

CROSSREFERENCE INDEXES


I - 4 1


184/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P


I - 4 2


185/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 4 3


186/212

S E CT I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P



I - 4 4


187/212

S E C T I ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 4 5


188/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P



I - 4 6


189/212

SECTION IV

F I G .

262626

26262626262626262626262626

2626262626262626272727272727272727272727272 727272727272727272727272727

ITEM

2

3

4

56

7

89

1011121314151617

1819202122232 425

1

2

3

45

67

89

101112131314151617181920212223242526

T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P


FIGURE AND ITEM NUMBER INDEXSTOCK NUMBER

5 3 1 0 - 0 0 - 6 2 7 - 6 1 2 85 3 1 0 - 0 0 - 0 8 0 - 6 0 0 4

5 3 0 5 - 0 0 - 2 2 5 - 3 8 3 95 3 1 0 - 0 0 - 2 0 9 - 0 7 8 6

3 0 3 0 - 0 0 - 5 2 8 - 4 4 4 95 3 1 0 - 0 0 - 8 8 0 7 7 4 65 3 1 0 - 0 0 - 5 1 4 - 6 6 7 45 3 0 6 - 0 0 - 2 2 5 - 8 4 9 95 3 1 0 - 0 0 - 8 0 9 - 3 0 7 85 3 0 5 - 0 0 - 0 6 8 - 0 5 0 2

5 3 1 0 - 0 0 - 6 2 7 - 6 1 2 85 3 4 0 - 0 1 - 1 6 4 6 7 3 35 3 0 5 - 0 0 - 0 4 2 6 4 1 75 3 1 0 - 0 0 - 7 6 8 - 0 3 1 85 3 1 0 - 0 0 - 2 0 9 - 5 1 1 6

5 3 0 5 - 0 0 - 7 2 4 - 5 9 0 3

5 3 0 5 - 0 0 - 2 2 5 - 9 0 9 25 3 1 0 0 0 - 5 1 4 - 6 6 7 4

5 3 0 5 - 0 0 - 4 7 0 - 3 3 2 1

5 3 1 0 - 0 0 - 2 0 9 - 0 7 8 65 3 0 5 - 0 0 - 2 2 5 - 3 8 3 9

5 3 0 6 - 0 0 - 2 2 6 - 4 8 2 55 3 1 0 - 0 0 - 5 1 4 - 6 6 7 4

5 3 0 5 - 0 0 - 0 6 8 - 0 5 0 25 3 4 0 - 0 1 - 1 4 9 9 2 6 3

4 7 3 0 - 0 1 - 1 5 1 - 9 2 2 9

4 7 3 0 0 1 - 1 9 8 - 5 4 7 9

5 3 0 6 0 0 - 2 2 5 - 8 4 9 92 9 2 0 - 0 0 - 8 8 2 - 3 4 0 1

CAGEC

2 3 8 3 42 3 8 3 411 5 6 8

9 6 9 0 69 6 9 0 69 6 9 0 62 3 8 3 49 6 9 0 69 6 9 0 62 3 8 3 49 6 9 0 69 6 9 0 69 6 9 0 69 6 9 0 69 6 9 0 69 6 9 0 6

9 6 9 0 62 3 8 3 49 6 9 0 69 6 9 0 69 6 9 0 62 3 8 3 42 3 8 3 41 9 7 2 87 6 2 4 19 6 9 0 62 3 8 3 49 6 9 0 69 6 9 0 62 3 8 3 49 6 9 0 69 6 9 0 61 9 3 2 89 6 9 0 69 6 9 0 69 6 9 0 61 9 3 2 81 9 3 2 89 6 9 0 69 6 9 0 62 3 8 3 49 6 9 0 62 3 8 3 42 3 8 3 42 3 8 3 42 3 8 3 42 3 8 3 42 3 8 3 42 3 8 3 49 6 9 0 69 6 9 0 6

PART NUMBER

4 6 9 44 1 9 4Z 2 6 6

M S 9 0 7 2 5 - 5 8M S 3 5 3 3 5 - 3 5M S 2 7 1 8 3 - 1 44 1 3 8M S 9 0 7 2 5 - 8M S 3 5 3 3 5 - 3 36 2 4M S 3 9 2 4 1 1 7M S 5 1 9 6 8 - 5M S 3 5 3 3 5 - 3 4M S 9 0 7 2 5 3 4M S 2 7 1 8 3 11M S 9 0 7 2 5 - 6

M S 3 5 3 3 5 - 3 57 5 3M S 9 0 7 2 5 - 11 3M S 5 1 9 6 7 1 4M S 3 5 3 3 5 - 3 71 0 6 9 - 1 1 - 21 0 6 9 - 1 1 - 1GKP5002SD4380M S 5 1 9 6 3 - 8 51 - 4 X 1 - 4 X 2 - 1 1 - 1 6M S 9 0 7 2 6 3 7M S 3 5 3 3 5 - 3 41 0 6 9 - 1 2M S 3 5 6 4 9 - 1 0 2M S 5 1 8 4 9 - 7 4LC6M S 5 1 9 6 7 - 2M S 3 5 3 3 5 - 3 3M S 9 0 7 2 5 - 8LC6LC6M S 9 0 7 2 8 3 2M S 3 5 3 3 5 3 44 1 7 5M S 9 0 7 2 5 661 84 1 8 54 1 4 88 7 74 1 5 84 1 6 71 0 6 9 - 1 5 3M S 9 0 7 2 5 - 3 4MS530131

I - 4 7


190/212

S E C TI ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 4 8


191/212

SE C TI ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 4 9


192/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 5 0


193/212

S ECT I ON IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 5 1


194/212

S E C T I ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 5 2


195/212

SEC TION I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 5 3


196/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 5 4


197/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 5 5


198/212


199/212


200/212

S E CT I ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 5 8


201/212


202/212

S E CT I ON I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 6 0


203/212

SECTION IV T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 6 1


204/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 6 2


205/212


206/212

S E C T I O N I V T M 5 - 4 9 3 0 - 2 1 8 - 2 4 P

I - 6 4


207/212

TM 5-4930-218-24P

By Order of the Secretary of the Army:CARL E. VUONO

General, United States Amy Chief of Staff

Official:PATRICIA P. HICKERSON

Brigadier General, United States Army The Adjutant General

DISTRIBUTION:

To be distributed in accordance with DA Form 1225E, (qty rqr blk no. 1178)

*U.S. GOVERNMENT PRINTING OFFICE OFFICE: 1991 - 554-030/40047


208/212


209/212


210/212


211/212


212/212

tm 5-4930-218-24p lub trailer eng-3a

Documents