tm - b&h photo video digital cameras, photography, camcorders · impact tm 10m 25m 50m 75m 100m...
TRANSCRIPT
TMimpact
Page 8(back cover)
Page 1(front cover)
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with speci�c legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group. © 2015 Gradus Group LLC. All Rights Reserved.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
Mini LT Power PackINSTRUCTIONSGG2
Congratulations on your purchase of the Impact Mini LT Portable Power Pack. Enjoy the many bene�ts of portable battery power, such as longer shooting time, shooting on location, and the ability to use both the dedicated Impact LiteTrek 4.0 Monolight and portable �ashes. With a fully charged Power Pack, you can achieve 650* �ashes at full power, and 3500* �ashes at the lowest power setting.
Features• Powers the Impact LiteTrek 4.0 Monolight and/or portable flash units• Automatic power on/off prevents battery drainage • 400W/s using the LiteTrek 4.0 Monolight• Lightweight and compact size• Digitally controlled• Long lasting and reliably built • Fast battery swap system for extended shoots• Two power outlets
Contents• Power Module• Battery Pack• Charger• Leather Shoulder Case with Shoulder Strap
Warning• Do not attempt to disassemble the Portable Power Pack. • Unplug from power source when not in use• Do not allow moisture or liquids to come in contact with the battery pack, charger or cables• Keep away from heat, fire, dust, and flammable oil and gases• Do not place metal objects near the power outlets• Do not use damaged cables – replacements are available from your Impact retailer• Use the appropriate power cables for the intended flash unit• Never exchange the battery pack in wet or damp conditions• Charge only with the supplied Impact charger • Keep out of reach of children
Impact provides optional Flash Cables that connect between the Impact Mini LT Portable Power Pack and a portable flash unit. See your Impact dealer for a cable that is compatible with your model of �ash.
Impact CZ Canon Flash Cable for LiteTrek system For Canon® �ash heads: 580EXII, 580EX, 550EX, MR-14EX, MT-24EX
Impact CKE Nikon Flash Cable for LiteTrek system For Nikon® flash heads: SB-800, SB80-DX, SB-900, SB-28
Page 2 Page 7
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
Optional Flash Cables
*Number of �ashes varies according to charge state, temperature, and maintenance
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
Page 6 Page 3
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
OverviewSpeci�cations and Troubleshooting
Battery Gauge Top View
Side View
*Number of �ashes varies according to charge state, temperature, and maintenance
ON•OFF
POWER
PROFESSIONAL
Power Switch
Protective Caps
Charger Input
Power Module
SwappableBattery Pack
Power/Indicator LED
Power Outlet BCZ, CKE tap for most portable �ashes
Power Outlet AFor Impact LiteTrek 4.0 Monolight
Speci�cationsBattery Type Rechargeable Lithium IonPower Output 325VPower Input 12V (only use Impact LiteTrek chargers)Current 7.2ACharging Time Approximately 4 hoursFlashes per Full Charge* 650 (full power); 3500 (1/64 power)Recycle Time 1-3.5 secondsFuse 40A
TroubleshootingThe battery pack includes overheat protection, which will automatically shut off function if the device reaches a temperature of 158°F (70°C). In the event that this happens, switch off the power module (if connected) and wait until the unit has had time to cool.
Symptom Solution
The power cable is plugged in,but the power indicator on thepower module does not illuminate.
The power module shuts down afterbeing turned on, even though thebattery is fully charged.
Verify that the cables are not damaged,are securely connected, and are the correct cables for the �ash in use.
Make certain that the battery packis securely seated into the powermodule.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
Page 6 Page 3
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
OverviewSpeci�cations and Troubleshooting
Battery Gauge Top View
Side View
*Number of �ashes varies according to charge state, temperature, and maintenance
ON•OFF
POWER
PROFESSIONAL
Power Switch
Protective Caps
Charger Input
Power Module
SwappableBattery Pack
Power/Indicator LED
Power Outlet BCZ, CKE tap for most portable �ashes
Power Outlet AFor Impact LiteTrek 4.0 Monolight
Speci�cationsBattery Type Rechargeable Lithium IonPower Output 325VPower Input 12V (only use Impact LiteTrek chargers)Current 7.2ACharging Time Approximately 4 hoursFlashes per Full Charge* 650 (full power); 3500 (1/64 power)Recycle Time 1-3.5 secondsFuse 40A
TroubleshootingThe battery pack includes overheat protection, which will automatically shut off function if the device reaches a temperature of 158°F (70°C). In the event that this happens, switch off the power module (if connected) and wait until the unit has had time to cool.
Symptom Solution
The power cable is plugged in,but the power indicator on thepower module does not illuminate.
The power module shuts down afterbeing turned on, even though thebattery is fully charged.
Verify that the cables are not damaged,are securely connected, and are the correct cables for the �ash in use.
Make certain that the battery packis securely seated into the powermodule.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
ON•OFF
POWER
PROFESSIONAL
ON•OFF
POWER
PROFESSIONAL
ON•OFF
POWER
PROFESSIONAL
Connect the appropriate power cable to either the LiteTrek 4.0, a portable �ash unit, or both.
Page 4 Page 5
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
Charging InstructionsOperating Instructions
Impact LiteTrek 4.0 Portable Flash
1
Connect the other end of the power cable to the Mini LT Power Module. The power cable must be plugged in securely or the unit will not turn on.
Outlet B is for portable �ashesOutlet A is for the LiteTrek 4.0
2
Press the power button to turn on. The battery gauge will take a moment to calibrate. Turn on the power to your LiteTrek 4.0 and/or portable �ash unit.
Press once to turn on. Press again to turn off.
The battery gauge indicates power remaining (75% shown).
3
ON•OFF
POWER
PROFESSIONAL
Disconnect any �ash units or cables connected to the power module. Battery may be charged with or without the power module attached.
Connect the charger into an AC wall socket (110-240V). Plug adapters can be used to connect to worldwide power outlets. A voltage converter should not be used.
Connect the charger to the charger input socket on the power module.
The charging status is indicated on the charger with an LED light. Red indicates charging, while green indicates that charging is complete.
1
3
2
FULLCHARGING
4
Do not interrupt the charging process. Doing so may affect the accuracy of the battery gauge.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
ON•OFF
POWER
PROFESSIONAL
ON•OFF
POWER
PROFESSIONAL
ON•OFF
POWER
PROFESSIONAL
Connect the appropriate power cable to either the LiteTrek 4.0, a portable �ash unit, or both.
Page 4 Page 5
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
Charging InstructionsOperating Instructions
Impact LiteTrek 4.0 Portable Flash
1
Connect the other end of the power cable to the Mini LT Power Module. The power cable must be plugged in securely or the unit will not turn on.
Outlet B is for portable �ashesOutlet A is for the LiteTrek 4.0
2
Press the power button to turn on. The battery gauge will take a moment to calibrate. Turn on the power to your LiteTrek 4.0 and/or portable �ash unit.
Press once to turn on. Press again to turn off.
The battery gauge indicates power remaining (75% shown).
3
ON•OFF
POWER
PROFESSIONAL
Disconnect any �ash units or cables connected to the power module. Battery may be charged with or without the power module attached.
Connect the charger into an AC wall socket (110-240V). Plug adapters can be used to connect to worldwide power outlets. A voltage converter should not be used.
Connect the charger to the charger input socket on the power module.
The charging status is indicated on the charger with an LED light. Red indicates charging, while green indicates that charging is complete.
1
3
2
FULLCHARGING
4
Do not interrupt the charging process. Doing so may affect the accuracy of the battery gauge.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
Page 6 Page 3
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
OverviewSpeci�cations and Troubleshooting
Battery Gauge Top View
Side View
*Number of �ashes varies according to charge state, temperature, and maintenance
ON•OFF
POWER
PROFESSIONAL
Power Switch
Protective Caps
Charger Input
Power Module
SwappableBattery Pack
Power/Indicator LED
Power Outlet BCZ, CKE tap for most portable �ashes
Power Outlet AFor Impact LiteTrek 4.0 Monolight
Speci�cationsBattery Type Rechargeable Lithium IonPower Output 325VPower Input 12V (only use Impact LiteTrek chargers)Current 7.2ACharging Time Approximately 4 hoursFlashes per Full Charge* 650 (full power); 3500 (1/64 power)Recycle Time 1-3.5 secondsFuse 40A
TroubleshootingThe battery pack includes overheat protection, which will automatically shut off function if the device reaches a temperature of 158°F (70°C). In the event that this happens, switch off the power module (if connected) and wait until the unit has had time to cool.
Symptom Solution
The power cable is plugged in,but the power indicator on thepower module does not illuminate.
The power module shuts down afterbeing turned on, even though thebattery is fully charged.
Verify that the cables are not damaged,are securely connected, and are the correct cables for the �ash in use.
Make certain that the battery packis securely seated into the powermodule.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
Congratulations on your purchase of the Impact Mini LT Portable Power Pack. Enjoy the many bene�ts of portable battery power, such as longer shooting time, shooting on location, and the ability to use both the dedicated Impact LiteTrek 4.0 Monolight and portable �ashes. With a fully charged Power Pack, you can achieve 650* �ashes at full power, and 3500* �ashes at the lowest power setting.
Features• Powers the Impact LiteTrek 4.0 Monolight and/or portable flash units• Automatic power on/off prevents battery drainage • 400W/s using the LiteTrek 4.0 Monolight• Lightweight and compact size• Digitally controlled• Long lasting and reliably built • Fast battery swap system for extended shoots• Two power outlets
Contents• Power Module• Battery Pack• Charger• Leather Shoulder Case with Shoulder Strap
Warning• Do not attempt to disassemble the Portable Power Pack. • Unplug from power source when not in use• Do not allow moisture or liquids to come in contact with the battery pack, charger or cables• Keep away from heat, fire, dust, and flammable oil and gases• Do not place metal objects near the power outlets• Do not use damaged cables – replacements are available from your Impact retailer• Use the appropriate power cables for the intended flash unit• Never exchange the battery pack in wet or damp conditions• Charge only with the supplied Impact charger • Keep out of reach of children
Impact provides optional Flash Cables that connect between the Impact Mini LT Portable Power Pack and a portable flash unit. See your Impact dealer for a cable that is compatible with your model of �ash.
Impact CZ Canon Flash Cable for LiteTrek system For Canon® �ash heads: 580EXII, 580EX, 550EX, MR-14EX, MT-24EX
Impact CKE Nikon Flash Cable for LiteTrek system For Nikon® flash heads: SB-800, SB80-DX, SB-900, SB-28
Page 2 Page 7
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
Optional Flash Cables
*Number of �ashes varies according to charge state, temperature, and maintenance
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
TMimpact
Page 8(back cover)
Page 1(front cover)
10M 25M 50M 75M 100M 10Y 25Y 50Y 75Y 100Y
One-Year Limited Warranty
This IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with speci�c legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group. © 2015 Gradus Group LLC. All Rights Reserved.
DO NOT EDIT OR REVISE ARTWORK
We will not approve any artwork which has been altered by the vendor
FORWARD YOUR PROOFSto [email protected]
FOR APPROVALBEFORE FINAL PRODUCTION
DO NOT BEGIN PRODUCTION WITHOUT PRIOR APPROVAL OF PROOFS
Mini LT Power PackINSTRUCTIONSGG2