E N G I N E E R E D F I B E R O P T I C S O L U T I O N S

Node Service Cable Adapter

T M

SPECIFICATIONS

QPC’s Node Service Cables provide an easy and cost effective method for connecting an Optical Node or other Network Device into a system.

QPC’s patented reverse thread design provides a weather tight seal and can be assembled quickly by hand. The adapter is constructed of hard anodized aluminum for a long service life. Dual seals insure a water tight connection.

These pre-terminated assemblies are available with a variety of cable and connector types to meet any application.

Connection:

Fiber Type:

Furcation:Cable Type:

5/8" Threaded Port

SM (Standard); SM (Non-Standard DS, LS, WB, etc.); MM (62.5/125 um & 50/125 um)SC, FC, ST, LC Other types upon request.900um, 2mm, 3mm Other types upon request.Loose Tube Tight Buffered Armored / Non-Armored

6 Fibers (3mm Furcation); 12 Fibers (2mm Furcation or 900um Furcation)

PRODUCTDESCRIPTION

Cable Type Jacket: Polyethylene (PE) Polyurethane (PU) Polyvinylchloride (PVC)General; Riser (OFNR) Plenum (OFNR) Low-Smoke Zero Halogen (LSZH)Fire/Flame Rating:

Connector Type:

Max Fiber Count:

• Reverse thread design allows for easy assembly without tools.• Eliminates additional splice points at node locations• Available with 90 Degree Adapter for tight locations• Lengths up to 20,000 ft are available• Rugged design prevents water penetration• Resists pull-out force of up to 400 lbs

FEATURESBENEFITS

Patent #6,754,430

QPC Fiber Optic, Inc. 1261 Puerta Del Sol · San Clemente, CA 92673 · TEL: 949-361-8855 · 877-qpcfiber · Fax: 949-361-8949www.qpcfiber.com Document: SPS-1018 Revision: 1