tm i250-60p hazardous grade c1d2 · po l y- c r yst al l i n e s ol a r m od u l e s i250-60p tm...

2
Environmental Characteristics Mechanical Load 5400 Pa Fire Rating Class C Operating Temperature -40 to +85 °C Model Name i250-60P Hazardous Area Protection Class 1 Division 2, Groups A, B, C, D Warranty Product Workmanship 10 years 10 Years 90% output 25 Years 80% output Gas wellheads Gas pipelines Tank Farms Oil refineries Offshore oil platforms Air monitoring Monitoring/SCADA Wireless Data Gas Detection Cathodic Protection Mining Telecom Industrial Electrical Applications Security Obstruction Lighting Traffic 250W http://www.invensun.com Poly-crystalline Solar Modules i250-60P TM Hazardous Grade C1D2 Safe for use in hazardous locations where explosive gases, vapors and liquids may be present. ISO 9001 compliant manufacturing facility

Upload: others

Post on 25-Aug-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Environmental CharacteristicsMechanical Load 5400 PaFire Rating Class COperating Temperature -40 to +85 °C

Model Name i250-60PHazardous Area ProtectionClass 1 Division 2, Groups A, B, C, D

WarrantyProduct Workmanship 10 years10 Years 90% output25 Years 80% output

• Gas wellheads • Gas pipelines • Tank Farms • Oil refineries • Offshore oil platforms • Air monitoring • Monitoring/SCADA • Wireless Data • Gas Detection • Cathodic Protection • Mining• Telecom• Industrial Electrical Applications• Security• Obstruction Lighting• Traffic

250W

h t t p : / / w w w . i n v e n s u n . c o m

P o l y - c r y s t a l l i n e S o l a r M o d u l e s

i250-60P TM

Hazardous Grade C1D2

Safe for use in hazardous locations where explosive gases,vapors and liquids may be present.

ISO 9001 compliant manufacturing facility

h t t p : / / w w w . i n v e n s u n . c o m

© Invensun Environmental Corporation All rights reserved.Specifications and designs included in this datasheet are subject to change without notice.

Mechanical Characteristics250W

P o l y - c r y s t a l l i n e S o l a r M o d u l e s

i250-60P TM

Hazardous Grade C1D2

Solar Cell Type Polycrystalline SiliconSolar Cell Size 156mm x 156mmNumber of Solar Cells 60Junction Box IP-65 ratedCables N/AConnectors N/ADiode 3 bypass diodesFront Glass 3.2mm tempered glassFrame Anodized Aluminum AlloyDimensions L x W x D 1632 x 995 x 50 mmWeight 20.0kg

Nominal Operating Cell Temperature 46°C, ±2°CMaximum Power (Pmax) Coefficient -0.45%/°C, ±0.05Short Circuit Current (Isc) Coefficient -0.6%/°C, ±0.015Open Circuit Current (Voc) Coefficient -0.35%/°C, ±0.05

Standard Test Conditions (STC)STC = 1000 W/M² irradiance, 25°C module temperature,

AM1.5 spectrum (Subject to simulator measurement uncertainty of ±3%)

Electrical CharacteristicsMaximum Power at STC (Pmax) 250WOptimum Operating Voltage (Vmp) 31.14VOptimum Operating Current (Imp) 8.03AOpen Circuit Voltage (Voc) 37.32VShort Circuit Current (Isc) 8.50AMaximum System Voltage DC 600VMaximum Series Fuse Rating 15APower Tolerance ±5%

995

1492

900

1632

50

8 12

Water Drainage Hole

885

GROUND HOLEMARKED

*

4007544