bearings · to fit every load requirement and application environment from bakery casters to...

1

EARINGS Two Piece Delrin (51) A DuPontTM engineered material, Delrin is de-signed for use in situations in which a self-lubri-cating material is optimal and corrosion cannot be tolerated. Ideal for wash-down or steam-cleaning applications as well as total immersion. Maximum temperature range is 160°F.

Precision Sealed Ball (28)Completely sealed, these precision ground ball bear-ings are held in a metal spacer ring between two hardened raceways. This bearing never needs to be lubricated, and with the lowest rolling resistance of all bearings offers the most ergonomic situation available. Maximum temperature range is 250°F.

Pedestal Precision Ball (29)These sealed precision ball bearings include an integral spanner which eliminates need for separate spanner. Maximum temperature range is 250°F.

Precision Tapered Roller (09)The tapered roller is the most effective bearing for heavy or towed loads. The taper allows for some thrust loading, while the heat-treated inner and outer race allow for maximum load capacity. Maximum temperature range is 400°F.

Roller (01,05,07)Roller bearings are the standard bearing in most caster applications. 1-1/2 and 2 inch width wheels feature a cage separating hardened steel rollers and a hardened steel split outer race. These bearings must be used on a hardened bushing or shaft. Maximum temperature range is 350°F. All Casters and wheels are rated up to 2.5 mph operation per the Institute of Caster & Wheel Manufacturers Guidelines.

Drawn Cup Roller (02)These are roller bearings as described above except they have metal cages holding the precision ground rollers. The outer race is a one-piece construction, giving added rigidity to the wheel bore. These bearings must be used on a hardened bushing or shaft. Maxi-mum temperature range is 400°F.

PLEASE NOTE: NOT ALL BRAKE AND BEARING COMBINATIONS WILL WORK- PLEASE CONSULT FACTORY. ALL BRAKES WORK ON SWIVEL CASTERS; CONSULT FACTORY FOR BRAKES AVAILABLE FOR RIGID CASTERS.

THE ADVANTAGE

B

When you select Albion, you not only choose a caster company, you choose the caster experts. We are known as the caster experts because we design casters and wheels

to fit every load requirement and application environment from bakery casters to industrial wheels; including light duty, medium duty, or extra heavy duty. More than 1,000 products are ready to ship within 24 hours. Plus, custom casters or wheels can be designed and built to your exact specifications.

Stainless Roller (01 ZB03)Stainless Roller bearings are an option for stain-less casters. These bearings have the same characteristics as the standard roller bearing, but with a much higher resistance to corrosion.

High Temp Delrin (53) A higher-temp version of the Two Piece Delrin. Ideal for wash-down or steam-cleaning ap-plications as well as total immersion. Maximum temperature range is 300°F.

2

Cam Brakes CAvailable on: 16, 62, 110, 170

Face Brakes BAvailable on: 11

Face Brakes FBAAvailable on: 16

Face Brakes FBBAvailable on: 16, 62, 81, 90, 110, 170, 310, 410

Face Brakes FBCAvailable on: 110, 170

*Face Brakes FBEAvailable on: 11,16, 60, 62, 110, 170

Face Brake FBFAvailable on: E5

Face Contact Brakes FAvailable on: DC, 02

Grip Lock Brakes GLAvailable on: 02,16

*Total Lock Brakes TAvailable on: 02, 16, DC*Picture shown is 16 series

Swivel Lock Brakes SL(Hand operated) Available on: 16, 62, 81, 90, 110, 170, 310, 410

Swivel Lock Brakes SL(Foot operated)Available on: 110, 170

*Available in Stainless Steel for E5, 120, and 130 Series, use FBG designation

Single Sided SSBAvailable on: 16, 62, 81, 90, 110, 170, 310, 410

Double Sided DSBAvailable on: 16, 81, 90, 110, 170, 310, 410

Face Contact Brakes FAvailable on: 81, 90

Poly Cam Brakes PAvailable on: 81, 90, 310, 410

Wrap Around Brakes WBAvailable on: 81, 90

Swivel Lock Brakes (welded) LAvailable on: 16, 62, 81, 90

RAKES B FIELD INSTALLED

FACTORY INSTALLED

To include an option, add abbreviation to the end of the part number. Ex: 110PD04201SFBC to add a Face Brake.

FOOD SERVICE CERTIFICATION

With NSF international listing, Albion is a proven supplier for this industry requir-ing the most stringent of sanitation stan-dards. Albion’s dedication to certification and meeting industry requirements brings confidence with every product. Look for the NSF logo on certified products in this catalog.

NOT SURE WHAT YOU

LET US HELP! REQUEST A PLANT AUDIT SO WE CAN

PROVIDE YOU WITH THE RIGHT CASTERS FOR YOUR

SPECIFIC APPLICATIONS.

PREVENZTM

The EPA registered and FDA compliant antimicrobial additive used in Prevenz™ wheels is designed to suppress the growth of a variety of destructive and odor causing microbes including bacteria, molds, mildew and fungi. These wheels are

suitable for a variety of applications including medical equipment, food equipment, pharmaceutical, chemical, meat & poultry, processing plants and more. To order add “PREV” to end of model number.

XS Prevenz™ XS Prevenz™Heavy Duty

XR Prevenz™ XR Prevenz™Heavy Duty

PX Prevenz™PY Prevenz™NG Prevenz™XP Prevenz™XA Prevenz™ XA Prevenz™Heavy Duty

ANTIMICROBIAL WHEELS

How Does Prevenz™ Work?The antimicrobial compound used in Pre-venz™ wheels is designed to suppress the growth of a variety of destructive and odor causing microbes including bacteria, molds, mildew, and fungi. The active in-gredients neutralize the ability of microbes to function, grow and reproduce.

How long does the protection last? Prevenz™ is engineered to be effective against microbes for the life of the wheel. The agent remains stored in the polymer and is gradually released to the surface of the wheel.

Will scratches, tread wear or wax buildup diminish the effectiveness?No. Prevenz™ protection is not a coating on the surface of the wheel. It is an integral part of the wheel material. Abra-sion, chips or scratches will not impact the effectiveness of Prevenz™ in any way. Not even wax buildup on the wheel can impair the bacteria fighting performance.

Does Prevenz™ eliminate the need for cleaning?No. Although Prevenz™ provides an added level of protection, these wheels do not eliminate the need for normal clean-ing practices. They are designed to work in conjunction with and enhance your ongoing program. Good hygiene practices should always be observed.

Is Prevenz™ safe? Yes. The active ingredients in Prevenz™ have undergone extensive laboratory test-ing and have been proven safe. The active ingredient has a history of hospital use for more than 25 years and is used in a broad range of popular personal care products, such as antimicrobial soap, toothpaste and deodorant. It is registered with the US Environmental Protection Agency (EPA), and products with this material have been approved by the US Food & Drug Admin-istration (FDA), the European Union (EU), the National Sanitation Foundation (NSF) and other regulatory authorities around the world.

NEED?

To request a Plant Audit or for more information, please contact an Inside Sales Coordinator at 1.800.835.8911 or email [email protected]!

A Plant Audit is a physical survey of your plant conducted by one of our representatives, which helps us determine your specific caster needs. There is no longer the need to take measurements of the

caster, look up old invoices to determine where you bought it last, or remember model numbers. You can consolidate the large range of sizes being used into a select few. Want to know more info before proceeding? We have an online PDF of exactly what our representative will be looking for at www.albi-oncasters.com, under the literature tab, labeled “Caster Survey.” To request a Plant Audit, email [email protected] today!

3

4

HI-TEMP BAKERY CASTERS

P2PRECISION LIGHT DUTY CASTERSThe smoothest operation available for light duty products. The sealed precision bearing in the swivel section

offers quiet maintenance-free operation.

• TopPlate&Yoke:Heavily embossed, formed steel to extend caster life under rug-ged conditions.

• Swivel Section: Sealed preci-sion bearing in swivel section

• Axle:3/8” diameter hollow axle

• Finish: Zinc plated

BRAKE OPTIONS• Face Contact (F)• Total Lock (T)

MOUNTING OPTIONS

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

3 11/4 200 41/4 15/16 1.75 P2XR03028 31/2 11/4 250 411/16 11/4 1.85 P2XR03X28 4 11/4 250 51/8 11/4 2.25 P2XR04028 5 11/4 250 63/16 11/2 2.75 P2XR05028

XR X-tra Soft Rubber Round Tread (28 Precision Ball Bearing)

3 11/4 200 41/4 15/16 1.75 P2XS03031 31/2 11/4 250 411/16 11/4 1.85 P2XS03X31 4 11/4 250 51/8 11/4 2.25 P2XS04031 5 11/4 250 63/16 11/2 2.75 P2XS05031

XS X-tra Soft Rubber Flat Tread (31 Annular Ball Bearing)

3 11/4 250 41/4 15/16 1.50 P2XA03031 31/2 11/4 250 411/16 11/4 1.50 P2XA03X31 4 11/4 250 51/8 11/4 2.25 P2XA04031 5 11/4 250 63/16 11/2 2.25 P2XA05031

XA Polyurethane on Polypropylene (31 Annular Ball Bearing)

FEATURES

High temperature casters ideal for bakery ovens and racks. Temperature ranges up to 525°F.

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

TR Hi-Temp Phenolic (41 Plain Bore)

HE Hi-Temp Nylon (41 Plain Bore)

4 11/4 350 51/8 11/4 2.00 02TR04041*

4 13/8 350 51/8 11/4 2.00 02HE04041*

*Stainless option available, change the prefix 02 to 04

MOUNTING OPTIONS

Consult factory for spe-cific temperature ratings and brake options.

For swivel models add “S” to end of caster number. For rigid models add “R” to end of caster number.

Prevenz™ antimicrobial models available. Add PREV to end of caster model.

Rated up to 475°F continuous use. Consult factory for intermittent use.

Rated up to 475°F continuous use. Consult factory for intermittent use.

Prevenz™ antimicrobial models available. Add PREV to end of caster model.For swivel models add “S” to end of caster number. For rigid models add “R” to end of caster number.

5

04 LIGHT DUTY STAINLESS STEEL CASTERSFor light-duty applications where frequent washdowns are necessary. Ideally suited for applications exposed to cleaning agents, steam, caustic solutions, or other corrosive agents which could cause rust or corrosion.

• TopPlate&Yoke:Heavily embossed, Type 304 formed stainless steel to extend caster life under rugged conditions

• SwivelSection:Double stainless steel ball bearing raceways to resist wear and improve maneuverability

• Axle: 3/8” diameter • Finish: Highly polished stain-

less steel

FEATURESBRAKE OPTIONS• Grip Lock (GL)

(swivel only)• Face Contact (F)• Total Lock (T)

MOUNTING OPTIONS

3 11/4 250 41/4 15/16 1.50 04PB03051 4 11/4 350 51/8 11/4 2.13 04PB04051 5 11/4 350 63/16 11/2 2.63 04PB05051

PB Polypropylene (51 Delrin Bearing)

3 11/4 350 41/4 15/16 1.50 04TM03041 31/2 11/4 350 411/16 11/4 2.00 04TM03X41 4 11/4 350 51/8 11/4 2.50 04TM04041 5 11/4 350 63/16 11/2 2.75 04TM05041

TM Phenolic (41 Plain Bore)

3 11/4 300 41/4 15/16 1.50 04XA03051 31/2 11/4 350 411/16 11/4 1.75 04XA03X51 4 11/4 350 51/8 11/4 2.50 04XA04051 5 11/4 350 63/16 11/2 2.75 04XA05051

XA Polyurethane on Polypropylene (51 Delrin Bearing)

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

3 11/4 200 41/4 15/16 1.50 04XS03051 31/2 11/4 250 411/16 11/4 1.75 04XS03X51 4 11/4 300 51/8 11/4 2.50 04XS04051 5 11/4 325 63/16 11/2 2.63 04XS05051

XS X-tra Soft Rubber Flat Tread (51 Delrin Bearing)

INSTITUTIONAL CASTERS

BRAKE OPTIONS• Face Contact (F)• Grip Lock (GL)• Total Lock (T)

MOUNTING OPTIONSFEATURES• TopPlate&Yoke:Heavily

embossed, formed steel to extend caster life under rug-ged conditions

• Swivel Section: Heat treated double ball bearing raceways to resist wear and improve maneuverability

• Axle: 3/8” diameter hollow axle


Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

Easy rolling, double ball bearing casters are ideally suited for virtually any operation where a smooth rolling, highly maneuverable, economical caster is required. Heat treated design delivers extended life and performance.

3 11/4 200 41/4 15/16 1.75 02XS03031 31/2 11/4 250 411/16 11/4 1.85 02XS03X31 4 11/4 300 51/8 11/4 2.00 02XS04031 5 11/4 325 63/16 11/2 2.25 02XS05031 6 11/4 350 71/4 11/2 2.40 02XS06031

XS X-tra Soft Rubber Flat Tread (31 Annular Ball)

3 11/4 250 41/4 15/16 1.75 02PB03041 4 11/4 350 51/8 11/4 2.00 02PB04041 5 11/4 350 63/16 11/2 2.25 02PB05041

PB Polypropylene (41 Plain Bore)

3 11/4 350 41/4 15/16 1.50 02TM03001 31/2 11/4 350 411/16 11/4 2.00 02TM03X01 4 11/4 350 51/8 11/4 2.00 02TM04001 5 11/4 350 63/16 11/2 2.75 02TM05001

TM Phenolic (01 Straight Roller Bearing)

3 11/4 300 41/4 15/16 1.50 02XA03031 31/2 11/4 350 411/16 11/4 1.50 02XA03X31 4 11/4 350 51/8 11/4 2.25 02XA04031 5 11/4 350 63/16 11/2 2.75 02XA05031

XA Polyurethane on Polypropylene (28 Precision Ball Bearing)

Standard plate mounting option 3 5/8” may vary +0.065” -0.030”

02

For Stainless Steel Roller bearing add ZB03 to end of part number. Ex: 05XS04201S ZB03.

www.albioncasters.com 6

05MEDIUM HEAVY DUTY STAINLESS STEEL CASTERSThis caster is the ideal solution for applications where frequent washdowns are necessary. The stainless steel caster is also well suited for applications exposed to cleaning agents, steam, caustic solutions, or other cor-rosive agents which could cause rust.

• TopPlate&Yoke: Formed from superior 1/4” Type 304 stainless steel plate

• Swivel Section: Double stainless steel ball bearing raceways formed smooth for ease of swiveling

• Axle:1/2” diameter• Finish:Highly polished stain-

less steel

FEATURES

4”

4-1/2”

3/8” Attaching Bolt

3”3-5/8”

3”2-5/8”

Standard PlateMOUNTING OPTIONS

BRAKE OPTIONS• Face Brake (FBD)• Stainless Steel Gripper Brake(FBG)• Stainless Steel Single Side (SSB)• Cam Brake (Consult Factory)

4 2 800 55/8 17/16 5 05TM04201 5 2 1000 61/2 15/8 51/4 05TM05201 6 2 1200 71/2 17/8 61/4 05TM06201 8 2 1200 91/2 23/8 8 05TM08201

TM Phenolic (01 Roller Bearing)

4 2 600 55/8 17/16 5 05XA04201 5 2 750 61/2 15/8 51/4 05XA05201 6 2 900 71/2 17/8 53/4 05XA06201 8 2 1000 91/2 23/8 7 05XA08201

XA Polyurethane on Polypropylene (01 Roller Bearing)

4 2 1200 55/8 17/16 41/4 05XP04201 5 2 1200 61/2 15/8 5 05XP05201 6 2 1200 71/2 17/8 51/2 05XP06201 8 2 1200 91/2 23/8 61/2 05XP08201

XP X-Treme™ Plus Solid Polyurethane (01 Roller Bearing)

4 2 350 55/8 17/16 51/4 05XS04201 5 2 375 61/2 15/8 51/4 05XS05201 6 2 600 71/2 17/8 53/4 05XS06201 8 2 675 91/2 23/8 6 05XS08201

XS X-tra Soft (Flat Tread) (01 Roller Bearing)

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

EMPIRETM MEDIUM HEAVY DUTY STAINLESSThis caster is the ideal, economical solution for applications where frequent wash-

downs are necessary. The E5 stainless steel caster is also well suited for applications exposed to cleaning agents, steam, caustic solutions, or other corrosive agents which

could cause rust. E5

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

4 2 600 55/8 51/4 5 E5XA04201 5 2 750 61/2 1.33 51/4 E5XA05201 6 2 900 61/2 1.53 53/4 E5XA06201 8 2 900 91/2 1.95 7 E5XA08201


4 2 350 55/8 19/16 51/4 E5XS04201 5 2 375 61/2 1 5/8 51/4 E5XS05201 6 2 600 71/2 1 7/8 53/4 E5XS06201 8 2 675 91/2 2 3/8 6 E5XS08201


XP X-TremeTM Plus Solid Polyurethane (01 Roller Bearing)

• TopPlate&Yoke: Formed from superior 1/4” Type 304 stainless steel plate

• SwivelSection:Double stainless steel ball bearing raceways formed smooth for ease of swiveling

• Axle: 1/2” diameter with zerk fitting• Finish: Polished stainless steel

FEATURES

MOUNTING OPTIONS

BRAKE OPTIONS• Gripper Brake (FBG)• Face Brake (FBF)• Hand Operated Swivel

Lock (SL1200000)

4”

4-1/2”


3”3-5/8”

3”2-5/8”

Standard Plate



4 2 1200 55/8 17/16 41/4 E5XP04201 5 2 1200 61/2 15/8 5 E5XP05201 6 2 1200 71/2 17/8 51/2 E5XP06201 8 2 1200 91/2 23/8 61/2 E5XP08201

5 2 1000 61/2 15/8 6 E5PM05228 6 2 1200 71/2 17/8 7 E5PM06228 8 2 1200 91/2 23/8 9 E5PM08228

PM Polyurethane on Aluminum Round Tread (28 Precision Ball Bearing)


7

12 MEDIUM HEAVY DUTY CASTERSThese casters are recommended for medium to medium heavy duty applications that require a larger top plate or bolt hole template.

• TopPlate&YokeBase:Cold formed from 1/4” steel plate. Yoke base is notched for factory or field-installable 4-position swivel lock

• Swivel Section: Smooth formed, hardened double ball bearing raceways minimize ball indentation and wear

•Axle:1/2” diameter hollow axle with zerk fitting

• Finish: zinc plated to resist corrosion and rust

FEATURES

5”

5-1/2”


4-1/2”

4-1/8”

Optional K Plate

Standard Plate

Optional J Plate


4-15/16”5-1/4”

4-1/2”

6-1/4”

3-3/8”

2-7/16”


3-5/8”4”

4”

5”

3”2-5/8”

MOUNTING OPTIONS

BRAKE OPTIONS• Face Brake (FBA)• Gripper Brake(FBE)

• Single Side (Consult Factory)• Hand operated swivel lock SL120000• Cam Brake (Consult Factory)

4 2 450 55/8 111/16 51/2 12PB04201 5 2 650 61/2 15/8 51/2 12PB05201 6 2 750 73/8 13/4 53/4 12PB06201* 8 2 1000 91/2 13/4 7 12PB08201

PB Polypropylene (01 Roller Bearing)

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

4 2 800 55/8 111/16 53/4 12TM04201 5 2 1000 61/2 15/8 6 12TM05201 6 2 1200 73/8 13/4 81/2 12TM06201* 8 2 1250 91/2 13/4 81/2 12TM08201


4 2 700 55/8 111/16 5 12XA04201 5 2 750 61/2 15/8 63/4 12XA05201 6 2 900 73/8 13/4 71/2 12XA06201* 8 2 1000 91/2 13/4 8 12XA08201


4 2 350 55/8 111/16 5 12XS04201 5 2 375 61/2 15/8 53/4 12XS05201 6 2 600 73/8 13/4 61/2 12XS06201* 8 2 675 91/2 13/4 71/2 12XS08201


MEDIUM HEAVY DUTY CASTERS16 Series casters are cold formed, heat treated steel and recommended for medium to medium heavy duty applications.

FEATURES


• Swivel Section: Heat treated, smooth formed, hardened, double ball bearing raceways minimize ball indentation and wear

• Axle:3/8” diameter hollow axle with zerk fitting

• Finish: Zinc plated to resist corro-sion.

4”

4-1/2”


3” 3-5/8”

3” 2-5/8”


Optional K Plate

Standard Plate

5”

5-1/2”

4-1/2”


4-1/8”

Optional D Plate

4”

5”3/8” Attaching Bolt

4”3-5/8”

3”2-5/8”

Optional J Plate

4-15/16” 5-1/4”

4-1/

2”

6-1/4”

3-3/8”

2-7/16”

MOUNTING OPTIONS

BRAKE OPTIONS• Face Brake (FBA)• Face Brake (FBB)• Grip Lock (GL)• Swivel lock (L)• Hand operated swivel lock

(SL160000)• Foot operated swivel lock

(SL160002)• Single Side (Consult factory)• Double Side (Consult factory)• Total lock (Consult factory)• Cam brake (Consult factory)

4 2 450 55/8 111/16 41/2 16PB04201 5 2 550 61/2 15/8 5 16PB05201 6 2 650 71/4 13/4 6 16PB06201* 8 2 850 91/2 13/4 51/2 16PB08201


Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

4 2 700 55/8 111/16 41/4 16XA04201 5 2 750 61/2 15/8 43/4 16XA05201 6 2 900 71/4 13/4 51/2 16XA06201* 8 2 1000 91/2 13/4 71/2 16XA08201


4 2 1250 55/8 111/16 5 16XP04201 5 2 1200 61/2 15/8 51/2 16XP05201 6 2 1250 71/4 13/4 61/4 16XP06201* 8 2 1200 91/2 13/4 8 16XP08201


4 2 350 55/8 111/16 51/4 16XS04201 5 2 375 61/2 15/8 51/2 16XS05201 6 2 600 71/4 13/4 6 16XS06201* 8 2 675 91/2 13/4 61/2 16XS08201


*Optional OH of 7 1/4.” Add to the end of part number: HS82 for swivel, HR82 for rigid

*Optional OH of 7 1/2.” Add to the end of part number HS60 for swivel, HR60 for rigid

16


ERGONOMIC PRECISION CASTERSErgonomic caster is designed for ease of movement.

Sealed precision swivel is maintenance free and very easy to swivel. Notched yoke base is standard on all models for

easy installation of swivel lock.


• Swivel Section: Precision sealed ball bearing eliminates need for routine maintenance


• Finish:Zinc plated

FEATURES4”

4-1/2”



Standard Top Plate

Optional K Top Plate

3” 3-5/8”

4-1/2”

3”

2-5/8”

4-15/16”5-1/4”

6-1/4”

3-3/8”

2-7/16”

MOUNTING OPTIONS

BRAKE OPTIONS• Face Brake (FBC)• Face Brake (FBB)• Gripper Brake (FBE)

• Hand operated swivel lock (SL160000)• Foot operated swivel lock (SL160002)

4 2 800 55/8 111/16 6 18NG04228 5 2 1000 61/2 15/8 61/2 18NG05228 6 2 1200 71/2 13/4 71/4 18NG06228 8 2 1250 91/2 13/4 9 18NG08228

NGMaxim® (29 Pedestal Precision)

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

4 2 700 55/8 111/16 51/4 18XA04228 5 2 750 61/2 15/8 53/4 18XA05228 6 2 900 71/2 13/4 61/2 18XA06228 8 2 1000 91/2 13/4 81/2 18XA08228

XA Polyurethane on Polypropylene (29 Pedestal Precision)

4 2 1250 55/8 111/16 6 18XP04228 5 2 1200 61/2 15/8 61/2 18XP05228 6 2 1250 71/2 13/4 71/4 18XP06228 8 2 1200 91/2 13/4 9 18XP08228

XP X-Treme™ Plus Solid Polyurethane (29 Pedestal Precision)

62HEAVY DUTY CASTERSManufactured from cold formed steel, this popular series

is recommended for heavy duty applications. A heat treated king bolt and nut ensure longer caster life.

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

• TopPlate:Cold formed from 1/4” steel plate to provide the strongest possible section for swivel bearing

• SwivelSection: 3-1/4” diameter load race. Raceways are coined smooth then heat treated to mini-mize ball indentation and wear


•Finish:Zinc plated

FEATURES

MOUNTING OPTIONS

BRAKE OPTIONS• Face Brake (FBB)• Griper Brake (FBE)• Swivel lock (L)• Single Side (Consult factory)• Double Side (Consult factory)• Hand operated swivel lock

(SL620000)• Cam brake (Consult factory)

4 2 800 55/8 15/16 61/4 62NG04201 5 2 1000 61/2 11/2 63/4 62NG05201 6 2 1200 71/2 13/4 73/4 62NG06201 8 2 1400 101/8 13/4 91/4 62NG08201

NGMaxim® (01 Roller Bearing)

4 2 600 55/8 15/16 61/2 62XA04201 5 2 750 61/2 11/2 71/2 62XA05201 6 2 900 71/2 13/4 81/4 62XA06201 8 2 1000 101/8 13/4 91/2 62XA08201


4 2 350 55/8 15/16 61/2 62XS04201 5 2 375 61/2 11/2 71/2 62XS05201 6 2 600 71/2 13/4 81/4 62XS06201 8 2 675 101/8 13/4 91/4 62XS08201

XS X-tra Soft Flat Tread (01 Roller Bearing)

4 2 1400 55/8 15/16 61/4 62XP04201 5 2 1200 61/2 11/2 63/4 62XP05201 6 2 1400 71/2 13/4 73/4 62XP06201 8 2 1200 101/8 13/4 91/2 62XP08201


18

5 2 1000 61/2 15/8 6 18PM05228 6 2 1250 71/2 13/4 7 18PM06228 8 2 1250 91/2 13/4 9 18PM08228

PM Polyurethane on Aluminum Round Tread (28 Precision Ball Bearing)


9

HEAVY DUTY CASTERSHeavy duty forged steel for extended life in rugged applications.

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

• TopPlate:AISI 1045 drop-forged steel for enhanced strength

• Swivel Section: Double ball bearing with coined “deep-groove” load and machined component thrust raceway.



FEATURES

4”

5”

25/8”

3”



35/8”

3”

Standard Plate

4”

5”

4”

21/8”

Optional G Plate


4”

4”

3”

3”

Optional H Plate

4”

5”


4”3-5/8”

3”2-5/8”

Optional J Plate

MOUNTING OPTIONS

BRAKE OPTIONS• Face Brake

(FBB)• Swivel lock (L)• Single Side

(Consult factory)• Double Side

(Consult factory)• Hand oper-

ated swivel lock (SL710000)

• Cam brake (Consult factory)

4”

5”

25/8”

3”



35/8”

3”

Standard Plate

4”

5”

4”

21/8”

Optional G Plate


4”

4”

3”

3”

Optional H Plate

4”

5”


4”3-5/8”

3”2-5/8”

Optional J Plate

4”

5”

25/8”

3”



35/8”

3”

Standard Plate

4”

5”

4”

21/8”

Optional G Plate


4”

4”

3”

3”

Optional H Plate

4”

5”


4”3-5/8”

3”2-5/8”

Optional J Plate

4 2 800 55/8 17/16 61/2 71TM04201 5 2 1000 61/2 113/16 63/4 71TM05201 6 2 1200 71/2 21/4 73/4 71TM06201 8 2 1400 101/8 21/4 10 71TM08201


4 2 600 55/8 17/16 51/2 71XA04201 5 2 750 61/2 113/16 61/4 71XA05201 6 2 900 71/2 21/4 63/4 71XA06201 8 2 1000 101/8 21/4 81/2 71XA08201


4 2 1400 55/8 17/16 61/2 71XP04201 5 2 1200 61/2 113/16 63/4 71XP05201 6 2 1400 71/2 21/4 73/4 71XP06201 8 2 1200 101/8 21/4 10 71XP08201


4 2 350 55/8 17/16 51/2 71XS04201 5 2 375 61/2 113/16 61/4 71XS05201 6 2 600 71/2 21/4 63/4 71XS06201 8 2 675 101/8 21/4 81/2 71XS08201


71

72 HEAVY DUTY CASTERSHeavy duty forged steel for extended life in rugged applications.

• Top Plate: Rugged AISI 1045 Drop forged steel for maximum strength

• Swivel Section: Double ball bearing coined “deep-groove” load and machined component thrust raceways

• Axle:1/2” diameter axle with zerk fitting


FEATURES MOUNTING OPTIONS

BRAKE OPTIONS• Face Brake (FBA)• Face Brake (FBB)• Grip Lock (GL)• Swivel lock (L)• Poly Cam (P)• Single Side


(Consult factory)• Hand oper-


• Wrap Around Brake (Consult factory)

• Cam brake (Consult factory)

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

4 2 800 55/8 17/16 71/2 72TM04201 5 2 1000 61/2 113/16 81/2 72TM05201 6 2 1200 71/2 21/4 91/2 72TM06201 8 2 1400 101/8 21/4 113/4 72TM08201

TM Phenolic (01, 07 Roller Bearing)

4 2 600 55/8 17/16 71/4 72XA04201 5 2 750 61/2 113/16 73/4 72XA05201 6 2 900 71/2 21/4 81/2 72XA06201 8 2 1000 101/8 21/4 101/4 72XA08201


4 2 1400 55/8 17/16 71/2 72XP04201 5 2 1200 61/2 113/16 81/2 72XP05201 6 2 1400 71/2 21/4 91/2 72XP06201 8 2 1200 101/8 21/4 10 72XP08201


4 2 350 55/8 17/16 71/4 72XS04201 5 2 375 61/2 113/16 73/4 72XS05201 6 2 600 71/2 21/4 81/2 72XS06201 8 2 675 101/8 21/4 101/4 72XS08201



Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

110CONTENDERTM KINGPINLESS HEAVY DUTY “Stamped Steel” fully heat treated construction is more durable than competitor’s case or induction

hardened construction.

4 2 800 55/8 13/16 8.00 110HE04201 5 2 1000 61/2 13/8 9.00 110HE05201 6 2 1200 71/2 19/16 10.00 110HE06201 8 2 1400 101/8 21/4 11.00 110HE08201*

HE Hi-Temp Nylon (01 Roller Bearing)

4 2 450 55/8 13/16 7.50 110PB04201 5 2 650 61/2 13/8 8.50 110PB05201 6 2 750 71/2 19/16 9.50 110PB06201 8 2 1000 101/8 21/4 10.50 110PB08201*


4 2 600 55/8 13/16 7.25 110XA04201 5 2 750 61/2 13/8 7.50 110XA05201 6 2 900 71/2 19/16 7.75 110XA06201 8 2 1000 101/8 21/4 9.25 110XA08201*


4 2 350 55/8 13/16 7.25 110XS04201 5 2 375 61/2 13/8 7.50 110XS05201 6 2 600 71/2 19/16 7.75 110XS06201 8 2 675 101/8 21/4 9.25 110XS08201*


120CONTENDERTM KINGPINLESS STAINLESS STEEL HEAVY DUTY This caster is the ideal solution for applications

where frequent washdowns are necessary. The polished stainless steel caster is also well suited

for applications exposed to cleaning agents, steam, caustic solutions, or other corrosive agents which

could cause rust.

4 2 800 55/8 13/16 8.25 120HE04201 5 2 900 61/2 13/8 9.25 120HE05201 6 2 900 71/2 19/16 10.25 120HE06201 8 2 900 101/8 21/4 11.25 120HE08201


Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

4 2 450 55/8 13/16 7.75 120PB04201 5 2 650 61/2 13/8 8.75 120PB05201 6 2 750 71/2 19/16 9.75 120PB06201 8 2 900 101/8 21/4 10.75 120PB08201


4 2 600 55/8 13/16 7.50 120XA04201 5 2 750 61/2 13/8 7.75 120XA05201 6 2 900 71/2 19/16 8.00 120XA06201 8 2 900 101/8 21/4 9.50 120XA08201


4 2 350 55/8 13/16 7.50 120XS04201 5 2 375 61/2 13/8 7.75 120XS05201 6 2 600 71/2 19/16 8.00 120XS06201 8 2 675 101/8 21/4 9.50 120XS08201


• Top Plate: 5/16” 304 stainless steel and welded construction for longer life

•Swivel Section: One row of 3/8" ball bearings mounted in a preci-sion machined raceway. Zerk in swivel section.

• Axle: 1/2” diameter hollow axle with zerk fitting

• Finish: Highly polished stainless steel

FEATURES

3/8

35/8

61/4

33/8 27/16

25/8

3

3

Swivel Cross Section

Optional (PATK)

Optional (PATD)Standard

41/2

4 51/2

5

3/8

51/4415/16

41/2

41/2

41/8

Attaching bolt

1/2Attaching bolt

Attaching bolt

3/8

35/8

61/4

33/8 27/16

25/8

3

3


Optional (PATK)


41/2

4 51/2

5

3/8

51/4415/16

41/2

41/2

41/8

Attaching bolt

1/2Attaching bolt

Attaching bolt

MOUNTING OPTIONS

BRAKE OPTIONS• Face Brake

(FBD)• Stainless (FBG)• Hand oper-


• Single Side (consult factory)

• Double Side (consult factory)

• Top Plate: 5/16” AISI 1045 steel welded and heat treated for longer life. Yoke Base: Notched AISI 1045 steel

• Swivel Section: One row of 3/8" ball bearings mounted in a heat treated precision machined race-way. Zerk in swivel section.

• Axle: 1/2” diameter hollow axle with zerk fitting

• Finish: Zinc plating

FEATURES

3/8

35/8

35/8

61/4

33/8 27/16

25/8

25/8

3

3

3


Optional (PATK)Optional (PATJ)


41/2

4

4

4

51/2

5

5

3/8

51/4415/16

41/2

41/2

41/8

Attaching bolt

3/8Attaching bolt

1/2Attaching bolt

Attaching bolt

BRAKE OPTIONS• Face Brake (FBB)• Face Brake- swivel only

(FBC)• Gripper Brake (FBE)• Hand operated swivel lock

(SL160000)• Foot operated swivel lock

(SL160002)• Single Side


(Consult factory)• Cam brake

(Consult factory)


*Optional OH of 9 1/2.” Add -01 to end of model number.


11

CONTENDERTM KINGPINLESS STAINLESS STEEL HEAVY DUTY 130 Caster features premium grade 304 stainless steel caster rig with a strong premium 316 stainless swivel section. The caster is well suited for applications exposed to cleaning agents, steam, caustic solutions, or other corrosive agents which could cause rust.

330 CONTENDERTM KINGPINLESS STAINLESS STEEL HEAVY DUTY

• Top Plate: 5/16” 304 stainless steel welded to 316 stainless raceway for longer life. Yoke Base: Notched 316 stainless steel welded inside and out

• Swivel Section: One row of 3/8" ball bearings mounted in a precision machined raceway. Zerk in swivel section.



FEATURES

Designed from premium grade 304 stainless steel caster rig with a strong premium 316 stainless swivel section. Excellent finish to protect caster from cleaning agents, steam, caustic solutions, or other corrosive agents which could cause rust.

• Top Plate: 5/16" 304 stainless steel welded inside and out to 316 stainless steel raceway for longer life. Yoke Base: Notched 316 stainless steel.

• Swivel Section: One row of 1/2" ball bearings mounted in a precision machined raceway. Zerk in swivel section.

• Axle:3/4” diameter with zerk fitting


FEATURES

3/8

35/8

35/8

61/4

33/8 27/16

25/8

25/8

3

3

3


Optional (PATK)Optional (PATJ)


41/2

4

4

4

51/2

5

5

3/8

51/4415/16

41/2

41/2

41/8

Attaching bolt

3/8Attaching bolt

1/2Attaching bolt

Attaching bolt

MOUNTING OPTIONS

BRAKE OPTIONS• Face Brake (FBD)• Stainless (FBG)• Hand oper-


• Single Side (Contact Factory)

• Double Side (Contact Factory)

Optional (PATP)

Standard

27/1633/8

51/4415/16

61/4

41 /2

1/2Attaching bolt

Optional (PATD)

3/841/8

41/2

51/2

5Attaching bolt

1/233/8

41/8

51/461/8

71/4

51/4Attaching bolt

Optional (PATS)

1/2

43/8

55/851/2

7

6

Attaching bolt

45/8


MOUNTING OPTIONS

BRAKE OPTIONS• Poly Cam (P)• Hand oper-


• Single Side (Con-tact Factory)

• Double Side (Con-tact Factory)

4 2 800 55/8 13/16 8.25 130HE04201 5 2 1000 61/2 13/8 9.25 130HE05201 6 2 1200 71/2 19/16 10.25 130HE06201 8 2 1200 101/8 21/4 11.25 130HE08201


Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

4 2 450 55/8 13/16 7.75 130PB04201 5 2 650 61/2 13/8 8.00 130PB05201 6 2 750 71/2 19/16 8.25 130PB06201 8 2 1000 101/8 21/4 9.75 130PB08201


4 2 600 55/8 13/16 7.50 130XA04201 5 2 750 61/2 13/8 7.75 130XA05201 6 2 900 71/2 19/16 8.00 130XA06201 8 2 1000 101/8 21/4 9.50 130XA08201


4 2 350 55/8 13/16 7.50 130XS04201 5 2 375 61/2 13/8 7.75 130XS05201 6 2 600 71/2 19/16 8.00 130XS06201 8 2 675 101/8 21/4 9.50 130XS08201


6 3 3000 71/2 13/8 16.00 330NX06528 8 3 3000 101/8 21/16 18.00 330NX08528 10 3 3000 111/2 21/4 21.00 330NX10528

NX Trionix™NXHighImpactPolymer(28 Precision Ball Bearing)

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Overal

l Heig

ht

(Inch

es)

Swivel L

ead

(Inch

es)

Approx

.Wt.

(LBS)

Caster Number

8 3 2520 101/8 21/16 20.25 330PD08501 10 3 3000 111/2 21/4 24.50 330PD10501

PD Polyurethane on Aluminum (01 Roller Bearing)

6 3 2000 71/2 13/8 15.00 330TM06501 8 3 2500 101/8 21/16 18.00 330TM08501 10 3 2900 111/2 21/4 20.00 330TM10501 12 3 3000 131/2 211/16 22.00 330TM12501


8 3 2000 101/8 21/16 7.50 330XP08528 10 3 2500 111/2 21/4 9.25 330XP10528

XP X-treme Plus Solid Polyurethane (28 Precision Bearing)



KIT NUMBER DESCRIPTION CASTER SERIES INCLUDED

PARTS INCLUDED

KITZJ06350001 28 and 31 Bearings Zinc HardwareIncludes: Axle, nut

04, 02, P2 ZJ063502, NL061600

KITZJ06350002 41 Bearing Zinc HardwareIncludes: Axle, nut, spanner

04, 02 ZJ063502, NL061600, ZF060824

KITZJ06350003 01 Bearing Zinc HardwareIncludes: Washers, bearing, axle, nut,spanner

04, 02 (2) WA081703, ZB081718, ZJ063502, NL061600, ZF060824

KITZJ06350004 51 Bearing Zinc HardwareIncludes: Bearing, axle, nut, spanner

04, 02 (2) TF081708, ZJ063502, NL061600, ZF060824

KITZJ06350005 23 bearing Zinc HardwareIncludes: Bearing, axle, nut, spanner

04, 02 Z0081722, ZJ063502, NL061600, ZF060824

KITZJ06350006 41 Bearing Stainless HardwareIncludes: Axle, nut, spanner

04, 02 ZJ063510, NJ061600, ZF06082401

KITZJ06350007 28 and 31 Bearings Stainless HardwareIncludes: Axle, nut

02, P2 ZJ063510, NJ061600

KITZJ06350008 51 Bearing Stainless HardwareIncludes: Bearing, axle, nut, spanner

04, 02 (2) TF081708, ZJ063510, NJ061600, ZF06082401

KITZJ06350009 23 Bearing Stainless HardwareIncludes: Bearing, axle, nut, spanner

04, 02 ZO081722, ZJ063510, NJ061600, ZF06082401

KITZJ08540001 01 Bearings Zinc HardwareIncludes: Nut, axle, bearing,washers, spanner

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

NL082000, ZJ085400, ZB121930, (2) WA121905ZF081239

KITZJ08540002 01 Bearing Stainless HardwareIncludes: Washer, nut, axle, bearing, washers, spanner

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

WA081401, NJ081311, ZJ085600, ZB12193001, (2) WA121905, ZF081240

KITZJ08540003 01 Bearing Zinc Hardware High TempIncludes: Nut, axle, bearing, washers, spanner

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

NL082000, ZJ085400, ZB121930, (2) WA121999, ZF081239

KITZJ08540004 01 Bearings Stainless Hardware High Temp In-cludes: Nut, axle, bearing, washers

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

NJ081311, ZJ085600, ZB12193001, (2) WA121904, (2) WA1212603, WA081401

KITZJ08540005 51 Bearing Zinc HardwareIncludes: Nut, axle, spanner, bearings

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

NL082000, NJ085400, ZF081239, (2) TF121912

KITZJ08540009 22 Bearing Zinc HardwareIncludes: Nut, axle, bearings. spanner

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

NL082000, ZJ085400, (2) OI121908, ZF081239

KITZJ08540010 22 Bearing Stainless HardwareIncludes: Washer, axle, nut, bearing

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

WA081401, NJ085600, NJ081311, (2) OI121908

KITZJ08540011 29 Bearing Zinc HardwareIncludes: Nut, axle, bearings

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

NL08200, ZJ085400, (2) ZA081903

KITZJ08540012 29 Bearing Stainless HardwareIncludes: Washer, axle, nut, bearing

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

WA081401,ZJ085600, NJ081311, (2) ZA08190301

KITZJ08540013 28 Bearings Zinc HardwareIncludes: Top hats, axle, nut, bearings

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

(2) ZY0812001, ZJ085403, NL082000, (2) ZA112500

KITZJ08540014 28 Bearings Stainless Hardware Includes: Washer, axle, nut, top hats, bearings

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

WA081401,ZJ085600, NJ081311, (2) ZY0812004, (2) ZA112501

KITZJ12760001 01 Bearings Zinc HardwareIncludes: Nut, axle, spanner, washers, bearings

330 NL121001, ZJ127600, ZF121657, (2) WA163199, ZB163148

KITZJ12760002 01 Bearings Stainless Hardware Includes: Washers, nut, axle, spanner, washers, bearings

330 WA122006, NJ121000, ZJ12760009, ZF12165703,(2) WA16310304, (3) WA16390005, ZB16314803

KITZJ12760003 28 Bearing Zinc HardwareIncludes: Nut, axle, bearings, top hats

330 NL121001, ZJ127600, (2) ZA163209, (2) ZY1216002

KITZJ12760004 28 Bearings Stainless HardwareIncludes: Washer, nut, axle, bearings,top hats

330 WA122006, ZJ12760009, (2) ZA19392601, (2) ZY12192404, NJ12100, NJ121000

KITZJ08540006 51 Bearing Stainless HardwareIncludes: Washer, nut, axle, spanner, bearings

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

WA081401, NJ081311, ZJ085600, ZF081240, (2) TF121912

KITZJ08540007 51 Bearing Zinc Hardware High TempIncludes: Nut, axle, spanner, bearing

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

NL082000. ZJ085400, ZF081239, (2) TF12191201

KITZJ08540008 51 Bearing Stainless Hardware High TempIncludes: Washer, nut, axle, spanner, bearing

05, 12, 16, 18, 61, 71, 72, 110, 120, 130, E5

WA081401, NJ081311, ZJ085600, ZF081240,(2) TF12191201

REPLACEMENT HARDWARE KITS

12

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Hub Le

ngth

(Inch

es)

Bore ID

(Inch

es)

Approx

.Wt.

(LBS)

Bearin

g ID

(Inch

es)

Bearing

HE

NG

4 2 800 2-3/16 1-3/16 3/4 1 Roller NG0420112 4 2 800 2-3/16 1-3/16 1/2 1 Pedestal Prec. NG0422908 5 2 1000 2-3/16 1-3/16 3/4 1 Roller NG0520112 5 2 1000 2-3/16 1-3/16 1/2 1 Pedestal Prec. NG0522908 6 2 1200 2-3/16 1-3/16 3/4 1-1/8 Roller NG0620112 6 2 1200 2-3/16 1-3/16 1/2 1-1/8 Pedestal Prec. NG0622908 8 2 1400 2-3/16 1-3/16 3/4 1-3/8 Roller NG0820112 8 2 1400 2-3/16 1-3/16 1/2 1-3/8 Pedestal Prec. NG0822908

4 1-3/8 700 1-1/2 1/2 1/2 1/2 Roller HE0404108 4 2 800 2-3/16 1-3/16 3/4 1 Roller HE0420112 5 2 1000 2-3/16 1-3/16 3/4 1-1/2 Roller HE0520112 6 2 1200 2-3/16 1-3/16 3/4 1-1/2 Roller HE0620112 8 2 1400 2-3/16 1-3/16 3/4 1-1/2 Roller HE0820112

4 2 2160 2-7/16 2 1/2 4 Precision NX0422808 5 2 2160 2-7/16 2 1/2 5 Precision NX0522808 6 2 2160 2-7/16 2 1/2 6 Precision NX0622808 6 3 7200 3-1/2 2 3/4 6-1/2 Precision NX0652812 8 3 7200 3-1/2 2 3/4 9 Precision NX0852812 10 3 7200 3-1/2 2 3/4 10 Precision NX1052812

3 1-1/4 250 1-1/2 1/2 1/2 1/2 Plain Bore PB0304108 4 1-1/4 300 1-1/2 1/2 1/2 1/2 Plain Bore PB0404108 5 1-1/4 450 1-1/2 1/2 1/2 1/2 Plain Bore PB0504108 5 1-1/4 450 1-1/2 1-5/16 1/2 1/2 Precision PB0505108 4 2 450 2-3/16 3/4 3/4 1/2 Plain Bore PB0424112 4 2 450 2-3/16 1-3/16 3/4 1 Roller PB0420112~ 5 2 550 2-3/16 3/4 3/4 3/4 Plain Bore PB0524112 5 2 650 2-3/16 1-3/16 3/4 1-1/4 Roller PB0520112 6 2 650 2-3/16 3/4 3/4 1 Plain Bore PB0624112 6 2 750 2-3/16 1-3/16 3/4 1-1/2 Roller PB0620112~ 8 2 850 2-3/16 3/4 3/4 1-1/4 Plain Bore PB0824112 8 2 1000 2-3/16 1-3/16 3/4 1-3/4 Roller PB0820112~

W HEEL SECTION Wheel Number

Hi-Temp NylonIdeal for specialty applications, these wheels can withstand continuous temperatures up to 475°F. Nylon Glass-filled wheels won’t chip, absorb water, or breakdown in caustic environments.

Maxim®Nylon and FiblerglassWith a focus on ergonomics, this advanced wheel starts rolling, keeps rolling and swivels with ease! The innovative nylon and fiberglass construction stands up to solvents, extreme temperatures.

NX

TrionixTM High Impact PolymerThese unique high impact polymer wheels deliver superior rollability, ca-pacity and slide resistance. Trionix™ features unique polymers that resist corrosion and most chemicals. Injec-tion molded process.

PB

PolypropyleneInjection molded blend of thermoplas-tic polymers which resist absorption and most chemicals and solvents. Capacity ratings are comparable to hard rubber wheels with the added advantage of being lighter in weight and having greater impact resistance.

PD

Poly on AluminumComposed of a polyurethane elastomer, open cast or injection molded, on clean, close tolerance cores. Wheels feature a chemical and mechanical lock of tread to the core. High capacity polyurethane protects floors, is non-marking and delivers quieter operation than standard metal wheels.

5 2 1000 2-7/16 1-9/16 1/2 2 Precision PM0522808 6 2 1250 2-7/16 1-9/16 1/2 3 Precision PM0622808 8 2 1500 2-7/16 1-9/16 1/2 4 Precision PM0822808

5 2 1000 2-7/16 1-9/16 1/2 2 Precision PM052280880A 6 2 1250 2-7/16 1-9/16 1/2 3 Precision PM062280880A 8 2 1500 2-7/16 1-9/16 1/2 4 Precision PM082280880A

PM

Poly on AluminumComposed of a polyurethane elasto-mer, open cast or injection molded, on clean, close tolerance cores. Wheels feature a chemical and mechanical lock of tread to the core. High capacity polyurethane protects floors, is non-marking and delivers quieter operation than standard metal wheels.

Shore 80A /95A

8 3 2520 3-1/4 1-15/16 1 4-1/4 Roller PD0850116 8 3 2520 3-1/4 1-15/16 1-1/4 4-1/4 Roller PD0850120 10 3 3000 3-1/4 1-15/16 1 5 Roller PD1050116 10 3 3000 3-1/4 1-15/16 1 5 Roller PD1050116 10 3 3000 3-1/4 1-15/16 1-1/4 5 Roller PD1050120 10 3 3000 3-1/4 1-15/16 3/4 5 Roller PD1052812

4 2 1400 2-3/16 1-3/16 3/4 1 Roller XP0420112~ 5 2 1200 2-3/16 1-3/16 3/4 1-1/2 Roller XP0520112~ 6 2 1400 2-3/16 1-3/16 3/4 1-3/4 Roller XP0620112~ 8 2 1200 2-3/16 1-3/16 3/4 4 Roller XP0820112~ 6 3 1700 3-1/2 2-7/16 3/4 5 Precision XP0652812 8 3 2000 3-1/2 2-7/16 3/4 6 Precision XP0852812 10 3 2500 3-1/2 2-7/16 3/4 8 Precision XP1052812

XP

X-treme® Solid PlusElastomer Specifically for high-capacity manual applica-tions involving chemicals, solvents or water. X-tremely low rolling resistance. One-piece construction affords freedom from tread sepa-ration with an exceptionally long life. Non-marking, floor protective tread.

13

3 1-1/4 200 1-1/2 1-1/16 1/2 5/16 Delrin XS0305108 3 1-1/4 200 1-1/2 1-1/16 1/2 5/16 Annular XS0303108 3-1/2 1-1/4 250 1-1/2 1-1/16 1/2 5/16 Delrin XS03X5108 3-1/2 1-1/4 250 1-1/2 1-1/16 1/2 5/16 Annular XS03X3108 4 1-1/4 300 1-1/2 1-1/16 1/2 3/8 Delrin XS0405108 4 1-1/4 300 1-1/2 1-1/16 1/2 3/8 Annular XS0403108 5 1-1/4 325 1-1/2 1-1/16 1/2 3/4 Delrin XS0505108 5 1-1/4 325 1-1/2 1-1/16 1/2 3/4 Annular XS0503108 6 1-1/4 325 1-1/2 1-1/16 1/2 3/4 Delrin XS0605108 6 1-1/4 325 1-1/2 1-1/16 1/2 3/4 Annular XS0603108

4 2 350 2-3/16 1-3/16 3/4 1 Roller XS0420112 5 2 375 2-3/16 1-3/16 3/4 1-1/8 Roller XS0520112 6 2 600 2-3/16 1-3/16 3/4 1-3/8 Roller XS0620112 8 2 675 2-3/16 1-3/16 3/4 2-3/8 Roller XS0820112

4 2 800 2-3/16 1-3/16 3/4 1 Roller NG0420112 4 2 800 2-3/16 1-3/16 1/2 1 Pedestal Prec. NG0422908 5 2 1000 2-3/16 1-3/16 3/4 1 Roller NG0520112 5 2 1000 2-3/16 1-3/16 1/2 1 Pedestal Prec. NG0522908 6 2 1200 2-3/16 1-3/16 3/4 1-1/8 Roller NG0620112 6 2 1200 2-3/16 1-3/16 1/2 1-1/8 Pedestal Prec. NG0622908 8 2 1400 2-3/16 1-3/16 3/4 1-3/8 Roller NG0820112 8 2 1400 2-3/16 1-3/16 1/2 1-3/8 Pedestal Prec. NG0822908

~ Wheels are complete with spanner bushing & nylon sealed retaining wasters.

3 1-1/4 250 1-1/2 1/2 1/2 1/2 Plain Bore PB0304108 4 1-1/4 300 1-1/2 1/2 1/2 1/2 Plain Bore PB0404108 5 1-1/4 450 1-1/2 1/2 1/2 1/2 Plain Bore PB0504108 5 1-1/4 450 1-1/2 1-5/16 1/2 1/2 Precision PB0505108 4 2 450 2-3/16 3/4 3/4 1/2 Plain Bore PB0424112 4 2 450 2-3/16 1-3/16 3/4 1 Roller PB0420112~ 5 2 550 2-3/16 3/4 3/4 3/4 Plain Bore PB0524112 5 2 650 2-3/16 1-3/16 3/4 1-1/4 Roller PB0520112 6 2 650 2-3/16 3/4 3/4 1 Plain Bore PB0624112 6 2 750 2-3/16 1-3/16 3/4 1-1/2 Roller PB0620112~ 8 2 850 2-3/16 3/4 3/4 1-1/4 Plain Bore PB0824112 8 2 1000 2-3/16 1-3/16 3/4 1-3/4 Roller PB0820112~

5 2 1000 2-7/16 1-9/16 1/2 2 Precision PM0522808 6 2 1250 2-7/16 1-9/16 1/2 3 Precision PM0622808 8 2 1500 2-7/16 1-9/16 1/2 4 Precision PM0822808

5 2 1000 2-7/16 1-9/16 1/2 2 Precision PM052280880A 6 2 1250 2-7/16 1-9/16 1/2 3 Precision PM062280880A 8 2 1500 2-7/16 1-9/16 1/2 4 Precision PM082280880A

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Hub Le

ngth

(Inch

es)

Bore ID

(Inch

es)

Approx

.Wt.

(LBS)

Bearin

g ID

(Inch

es)

Bearing

Wheel Number

3 1-1/4 200 1-1/2 1-1/16 3/8 5/16 Precision XR0302806 3-1/2 1-1/4 250 1-1/2 1-1/16 3/8 5/16 Precision XR03X2806 4 1-1/4 300 1-1/2 1-1/16 3/8 3/8 Precision XR0402806 5 1-1/4 325 1-1/2 1-1/16 3/8 3/4 Precision XR0502806

6 2 450 2-3/16 1-3/16 3/4 1-3/8 Roller XR0620112 8 2 600 2-3/16 1-3/16 3/4 2-3/8 Roller XR0820112

XR

Xtra-Soft RoundGrey TreadThe Ultimate X-tra soft rubber wheels offer the ultimate in ergonomic ease. Whether it’s durability, quiet operation, or rollabil-ity, these wheels can answer your every application need. XZ and XY wheels are conductive versions of the XS and XR wheels.

4 2 1400 2-3/16 1-3/16 3/4 1 Roller XP0420112~ 5 2 1200 2-3/16 1-3/16 3/4 1-1/2 Roller XP0520112~ 6 2 1400 2-3/16 1-3/16 3/4 1-3/4 Roller XP0620112~ 8 2 1200 2-3/16 1-3/16 3/4 4 Roller XP0820112~ 6 3 1700 3-1/2 2-7/16 3/4 5 Precision XP0652812 8 3 2000 3-1/2 2-7/16 3/4 6 Precision XP0852812 10 3 2500 3-1/2 2-7/16 3/4 8 Precision XP1052812

XS

XS

4 2 800 2-3/16 1-3/16 3/4 Plain Bore RT0420019 4 2 800 2-3/16 1-3/16 3/4 Roller RT0420112~ 5 2 1000 2-3/16 1-3/16 3/4 Plain Bore RT0520019 5 2 1000 2-3/16 1-3/16 3/4 Roller RT0520112~ 6 2 1200 2-3/16 1-3/16 3/4 Plain Bore RT0620019 6 2 1200 2-3/16 1-3/16 3/4 Roller RT0620112~ 8 2 1400 2-3/16 1-3/16 3/4 Plain Bore RT0820019 8 2 1400 2-3/16 1-3/16 3/4 Roller RT0820112~

4 2 1000 2-3/16 1-3/16 3/4 DT0420019 DT0420112~ 5 2 1200 2-3/16 1-3/16 3/4 DT0520019 DT0520112~ 6 2 1400 2-3/16 1-3/16 3/4 DT0620019 DT0620112~ 8 2 1600 2-3/16 1-3/16 3/4 DT0820019 DT0820112~

4 2 800 2-3/16 1-3/16 3/4 HT0420019 HT0420112~ 5 2 1000 2-3/16 1-3/16 3/4 HT0520019 HT0520112~ 6 2 1200 2-3/16 1-3/16 3/4 HT0620019 HT0620112~ 8 2 1400 2-3/16 1-3/16 3/4 HT0820019 HT0820112~

RTReinforced Thermoplastic High per-formance, resiliant, and cost effective wheel. Ideally suited for food processing, tool storage, sanitary maintenance, and application requiring easy mobility under heavy loads. Extremely resistant to water, chemical absorption, and steam cleaning.

DT

HT

RM

Heavy Duty RT WheelTo create a stronger and higher impact resistant wheel, the RT wheel recreated with a glass reinforced ny-lon material. The DT wheel is ideal for amplications subject to strong impact and abuse.

High Temp RT WheelA High Temp version of the RT wheel, can withstand continuous heat of up to +480°F, consult fac-tory for intermittent temperatures.

Xtra-Soft Flat Grey Tread (Soft)The Ultimate X-tra soft rubber wheels offer the ultimate in ergonomic ease. Whether it’s durability, quiet operation, or rollability, these wheels can answer your every application need. XZ and XY wheels are conductive versions of the XS and XR wheels.

Xtra-Soft Flat Grey Tread (Medium)The Ultimate X-tra soft rubber wheels offer the ultimate in ergonomic ease. Whether it’s durability, quiet operation, or rollability, these wheels can answer your every application need. XZ and XY wheels are conductive versions of the XS and XR wheels.

High Modulus Grey Rubber on Aluminum WheelsHigh modulus rubber wheels roll and swivel easier than conventional rubber wheels.

5 2 600 2-7/16 – 1/2 Precision RM0522808 6 2 700 2-7/16 – 1/2 Precision RM0622808 8 2 700 2-7/16 – 1/2 Precision RM0822808

14

3 1-1/4 250 1-7/16 1/2 1/2 1/2 Plain Bore PW0304108 3-1/2 1-1/4 275 1-7/16 1/2 1/2 1/2 Plain Bore PW03X4108 4 1-1/4 300 1-7/16 1/2 1/2 1/2 Plain Bore PW0404108 4 2 450 2-3/16 3/4 3/4 3/4 Plain Bore PW0424112 4 2 450 2-3/16 1/2 1/2 3/4 Plain Bore PW0424108 5 1-1/4 450 1-7/16 1/2 1/2 1/2 Plain Bore PW0504108 5 2 550 2-3/16 3/4 3/4 3/4 Plain Bore PW0524112 5 2 650 2-3/16 1/2 1/2 3/4 Plain Bore PW0524108 5 2 650 2-3/8 1/2 3/4 3/4 Delrin PW0525112 6 2 650 2-3/16 3/4 3/4 3/4 Plain Bore PW0624112 6 2 750 2-3/16 1/2 1/2 3/4 Plain Bore PW0624108 6 2 750 2-3/8 1/2 3/4 3/4 Delrin PW0625112

3 1-3/8 300 1-1/2 1/2 1/2 1/4 Plain Bore RW0304108 3-1/2 1-3/8 300 1-1/2 1/2 1/2 1/4 Plain Bore RW03X4108 4 1-3/8 300 1-1/2 1/2 1/2 3/4 Plain Bore RW0404108 4 2 500 2-3/16 1-3/16 3/4 1 Roller RW0420112 5 1-3/8 440 1-1/2 1/2 1/2 1 Plain Bore RW0504108 5 2 650 2-3/16 1-3/16 3/4 1/2 Roller RW0520112 6 2 700 2-3/16 1-3/16 3/4 2 Roller RW0620112 8 2 900 2-3/16 1-3/16 3/4 2-1/2 Roller RW0820112

3 1-1/4 300 1-1/2 – 3/8 3/8 Delrin XA0305106 3 1-1/4 300 1-1/2 – 3/8 3/8 Precision XA0302806* 3 1-1/4 300 1-1/2 – 3/8 3/8 Annular XA0303106 3-1/2 1-1/4 360 1-1/2 – 3/8 3/8 Delrin XA03X5106 3-1/2 1-1/4 360 1-1/2 – 3/8 3/8 Precision XA03X2806 3-1/2 1-1/4 360 1-1/2 – 3/8 3/8 Annular XA03X3106 4 1-1/4 400 1-1/2 – 3/8 1/2 Delrin XA0405106 4 1-1/4 400 1-1/2 – 3/8 1/2 Precision XA0402806* 4 1-1/4 400 1-1/2 – 3/8 1/2 Annular XA0403106 5 1-1/4 440 1-1/2 – 3/8 3/4 Delrin XA0505106 5 1-1/4 440 1-1/2 – 3/8 3/4 Precision XA0502806* 5 1-1/4 440 1-1/2 – 3/8 3/4 Annular XA0503106 4 2 600 2-3/16 1-3/16 3/4 1/2 Precision XA0422812 4 2 600 2-3/16 1-3/16 3/4 1/2 Roller XA0420112~ 5 2 750 2-3/16 1-3/16 3/4 1-3/4 Precision XA0522812 5 2 750 2-3/16 1-3/16 3/4 1-3/4 Roller XA0520112~ 6 2 900 2-3/16 1-3/16 3/4 2-1/2 Precision XA0622812 6 2 900 2-3/16 1-3/16 3/4 2-1/2 Roller XA0620112~ 8 2 1000 2-3/16 1-3/16 3/4 2-3/4 Precision XA0822812 8 2 1000 2-3/16 1-3/16 3/4 2-3/4 Roller XA0820112~

3 1-1/4 400 1-3/8 1-1/16 1/2 1/2 Roller TM0300108 3 1-1/4 400 1-3/8 1-1/16 1/2 1/2 Plain Bore TM0204108 3-1/2 1-1/4 400 1-3/8 1-1/16 1/2 3/4 Roller TM03X0108 3-1/2 1-1/4 400 1-3/8 1-1/16 1/2 3/4 Plain Bore TM03X4108 4 1-1/4 400 1-3/8 1-1/16 1/2 3/4 Roller TM0400108 4 1-1/4 400 1-3/8 1-1/16 1/2 3/4 Plain Bore TM0404108 5 1-1/4 400 1-3/8 1-1/16 1/2 1-1/4 Roller TM0500108 5 1-1/4 400 1-3/8 1-1/16 1/2 1-1/4 Plain Bore TM0504108 3-1/4 2 700 2-3/16 1-3/16 3/4 1-1/4 Roller TM03X0108 4 2 800 2-3/16 1-3/16 3/4 1-1/2 Roller TM0420112~ 5 2 1000 2-3/16 1-3/16 3/4 1-3/4 Roller TM0520112~ 6 2 1200 2-3/16 1-3/16 3/4 2-1/2 Roller TM0620112~ 6 3 2000 3-1/4 1-3/16 1 5 Roller TM0650116 6 3 2000 3-1/4 1-3/16 1-1/4 5 Roller TM0650120 8 3 2500 3-1/4 1-15/16 1 7-1/4 Roller TM0850116 8 3 2500 3-1/4 1-15/16 1-1/4 7-1/4 Roller TM0850120 10 3 2900 3-1/4 1-15/16 1 9-3/4 Roller TM1050116 10 3 2900 3-1/4 1-15/16 1-1/4 9-3/4 Roller TM1050120 12 3 3500 3-1/4 1-15/16 1 12-3/4 Roller TM1250116 12 3 3500 3-1/4 1-15/16 1-1/4 12-3/4 Roller TM1250120

Polyurethane on Polypropylene Core Excellent properties where wash-down of material handling equip-ment is required. Tread is mechani-cally locked to an injection molded polymer core to prevent separation. Poly wheels offer greater load capacity than rubber.

XA

NW

Wheel

Diamete

r

(Inch

es)

Tread

Widt

h

(Inch

es)

Capac

ity (Lb

s)

(R

ated fo

r manu

al oper

ation)

Hub Le

ngth

(Inch

es)

Bore ID

(Inch

es)

Approx

.Wt.

(LBS)

Bearin

g ID

(Inch

es)

Bearing

Wheel Number

TM

TR

PW

TM and TR wheels are molded of heavy macerated or chopped cotton denim, impregnated with phenolic resin and formed in close fitting molds under high pressure and temperature. They are non-marking and excellent load carriers. TR wheel is rated for continuous use up to 475°F.

RW

Polypropylene Designed to withstands the rigors of high temperature, these wheels are perfect for cooker racks and retort carts. Oversized bore ID ensures smooth movement, even if wheels experience heat expansion.

Polypropylene Injection molded blend of ther-moplastic polymers which resist absorption and are resistant to most chemicals and solvents. Capacity ratings are comparable to hard rubber wheels with the added advantage of being lighter in weight and having greater impact resistance.

~ Wheels are complete with spanner bushing & nylon sealed retaining wasters.

Phenolic

High-Temp Phenolic

*Complete with thread guard spacer.

5 2 600 2-3/16 1-3/16 3/4 1 Roller NW0520112 5 2 600 2-3/16 1-3/16 3/4 1 Delrin NW0525112 6 2 900 2-3/16 1-3/16 3/4 1-1/4 Roller NW0620112 6 2 900 2-3/16 1-3/16 3/4 1-1/4 Delrin NW0625112 8 2 1100 2-3/16 1-3/16 3/4 2 Roller NW0820112 8 2 1100 2-3/16 1-3/16 3/4 2 Delrin NW0825112

White NylonEconomical ... Strong ... Clean.Excellent for clean rooms.

bearings · to fit every load requirement and application environment from bakery casters to...

Documents