KENT 8" X 18" MDL. KGS818AHD HYDRAULIC SURFACE GRINDER

TOOL & DIE AND GENERAL MACHINING FACILITYFeaturing: Lathes, Milling Machines, Grinders, Fabricating Equipment, Support Machinery, Material Handling Equipment

& Much, Much More!

At the Premises of

TITAN TOOL & DIE COMPANY, INC.10050 West Gulf Bank Rd., HOUSTON, TX 77040

(See Directions on Back Page)

AUCTION: WED.

JAN. 13 10:00 A.M.

INSPECTION: Tuesday,

January 12 9:00 A.M. to

4:00 P.M. & Morning of

Sale

BUYER’S PREMIUM:

15% ONSITE 18% WEBCAST

Read Partial Terms & Conditions on Back Page of BrochureYAM 40" X 120" GAP BED ENGINE LATHE

>SUMMIT MDL. AFD85

3-1/2" TABLE-TYPE HORIZONTAL BORING MILL

AUCTION

On-Site Bidding in Houston, TX or Bid Via Webcast at

Headquarters:1304 Langham Creek Drive, Suite 454

Houston, Texas 77084

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

Ron Moore, Texas Lic. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

<HURCO MDL. CSX50 CNC VERTICAL MACHINING CENTER

BRIDGEPORT EZ-PATH CNC LATHE

CNC

CNC

2003

SUMMIT MDL. AFD85 3-1/2" TABLE-TYPE HORIZONTAL BORING MILL

CNC VERTICAL MACHINING CENTERSHURCO MDL. CSX50, new 2003, Hurco Ultimax SSM CNC control, 10" x 60" tbl., 50" X, 22" Y, 24" Z-axis travels, CAT-40 taper, spds. to 6,000 RPM, 20-pos. ATC, S/N E50017.

DAH-LIH MDL. MCV610, Fanuc OM CNC control, 18" x 37.4" tbl., 40" X, 20" Y, 22" Z-axis travels, CAT-40 taper, 6,000 RPM, 16-pos. ATC, S/N 610595.

HURCO MDL. MB1, Hurco MB1 CNC control, #30 quick switch spndl., 12" x 40" tbl. working surface, 750-lb. max. tbl. load, 30" X, 15" Y and 16" Z-axis travels, 5 HP motor, 3,500 RPM, S/N MH8028101.

TABLE-TYPE HORIZONTAL BORING MILLSSUMMIT MDL. AFD85, 43" x 51" built-in rotary tbl., approx. 60" vert. travel, approx. 63" cross travel, 3-1/2" spndl., spndl. spds.: 12.5–1,180 RPM, #40 NST spndl. taper w/pwr. drawbar, 3-axis D.R.O., outboard suppt., spndl. suppt. collet, pendant control, tbl. outriggers, S/N 142.

GIDDINGS & LEWIS MDL. 330T, 36" x 74" tbl., 48" approx. vert. travel, 60" cross travel, approx. 48" long. travel, 3" cap., 3" main spndl., 2" high-speed spndl., main spndl. spds.: 8.3–500 RPM, aux. spndl. spds.: 25–1,500 RPM, #5 MT main spndl., #4 MT aux. spndl., outboard suppt., 3-axis D.R.O., S/N 6603.

HORIZONTAL/VERTICAL TURRET MILLING MACHINES(3) DAH-LIH MDL. DL-GH2200, 11" x 51" tbl., #40 NST spndl. taper, variable vert. spndl. spds.: 80–3,800 RPM, 5" vert. quill travel, horiz. spndl. spds.: 90–1,400 RPM, 5 HP vert. spndl., hard-ened and ground bedways, 3-way pwr. feeds, 2-axis D.R.O., S/N 81628, S/N 81545, S/N 80434.

DAH-LIH MDL. DL-GH950, 12" x 53" tbl., #40 NST spndl. taper, spds.: 80–3,800 RPM, variable spd. 5 HP head, horiz. spndl. spds.: 50–2,040 RPM, pendant control, 2-axis D.R.O., 3-way pwr. feed, S/N 69050304.

VERTICAL TURRET MILLING MACHINESLAGUN MDL. FTV4, 11" x 58" tbl., #40 NST spndl. taper, 3-way pwr. feeds, 2-axis D.R.O., 13" x 60" drilled and tapped sub-plate, S/N N.A.

SHYEHORNG MDL. 2S, 9" x 42" tbl., spds.: 80–2,720 RPM, long. pwr. feed, 2-axis D.R.O., S/N 792396.

KENT MDL. KTM380, 9" x 42" tbl., 2-axis D.R.O., belt driven head, spds.: 65–2,700 RPM, S/N 820419-5.

GIDDINGS & LEWIS MDL. 330T 3" TABLE-TYPE HORIZONTAL BORING MILL

TAICHI 3' X 9' RADIAL ARM DRILL

>(1 OF 4)

DAH-LIH HORIZ./VERT.

TURRET MILLING MACHINES

<LAGUN MDL. FTV4 VERTICAL TURRET MILLING MACHINE

HURCO MDL. CSX50 CNC VERTICAL MACHINING CENTER

CNC

DAH-LIH MDL. MCV610 CNC VERTICAL MACHINING CENTER

CNC

2003

On-Site Bidding in Houston, Texas orBid Via Webcast at

,,

CNC LATHEBRIDGEPORT EZ-PATH, 17" sw., 40" dist. btwn. center, spds.: 37.5–3,000 RPM, 2" spndl. hole, pulse coder handles, quick change toolpost, 10" 3-jaw chuck, S/N 002-078072-325.

ENGINE LATHESYAM 40" x 120" GAP BED, 40" sw. over bed, approx. 60" sw. in gap, 120" dist. btwn. cen-ters, (2) removable gap pieces, 4.1" spndl. hole, spndl. spds.: 5–400 RPM, inch/metric thdng., 41" 4-jaw chuck, steadyrest, pendant control, S/N 201051.

TARNOW MDL. TUJ-50M 22" X 60" GAP BED, 22" sw. over bed, approx. 32" sw. in gap, 60" dist. btwn. centers, spds.: 20–1,600 RPM, inch/metric thdng., 4.1" spndl. hole, 25" 4-jaw chuck, 2-axis D.R.O., taper attach., S/N 0381-1539.

MONARCH 18" X 50", spds.: 12–487 RPM, S/N 4653.

VICTOR 16" X 40" MDL. 1640, 2" spndl. hole, spds.: 30–1,800 RPM, inch/metric thdng., 2-axis D.R.O., S/N 461016.

RADIAL ARM DRILLTAICHI 3' X 9" MDL. TC1100HS, pwr. eleva-tion, box tbl., spds.: 25–1,511 RPM, 5 HP main spndl., S/N 162.

TIG WELDERMILLER SYNCROWAVE MDL. 250DX, 250 amps @ 30 v., 40% duty cycle, TIG runner, chiller base, TIG torch, running gear, S/N LC269486.

SURFACE GRINDERSKENT 8" X 18" MDL. KGS818AHD HYDRAULIC, 2 HP direct drive spndl., 8" x 18" fine line electromagnetic chuck and controller, auto. incremental downfeed, ex-ternal coolant system w/vacuum, S/N 95075501.

KBC 6" X 18" MDL. FSG618, 6" x 18" electromagnetic fine line chuck and controller, S/N 02-01007.

HARIG 6" X 12" MDL. SUPER 612, 1 HP direct drive spndl., 6" x 12" perm. magnetic chuck, S/N 11646.

GRINDING ACCESSORIES; HARIG GRIND-ALL NO. 1 GRINDING FIXTURE.

TOOL & CUTTER GRINDERSDECKEL MDL. SOE SINGLE LIP, Type K0D526/XS/XF/S12, fabricated stand, assorted collets, S/N 313026.

CUTTERMASTER MDL. CM-01 ENDMILL SHARPEN-ER, air bearing sharpening fixture, tilt spndl., 1/3 HP drive, S/N 6042.

ELECTRICAL DISCHARGE MACHINE

CHMER MDL. CD-90M, 20" x 31-1/2" tbl., 28" x 49-1/2" x 20" dp. work tank, 90 amp solid state pwr. supply.

VICTOR 16" X 40" MDL. 1640 ENGINE LATHE

YAM 40" X 120" GAP BED ENGINE LATHE

MILLER SYNCROWAVE TIG WELDER

TARNOW MDL. TUJ-50M 22" X 60" GAP BED ENGINE LATHE

CHMER MDL. CD-90M ELECTRICAL DISCHARGE MACHINE

BRIDGEPORT EZ-PATH CNC LATHE

AUCTION: WEDNESDAY, JANUARY 13 • 10:00 A.M. INSPECTION: Tuesday, January 12

9:00 A.M. to 4:00 P.M. & Morning of Sale

CNC

TOOL AND CUTTER GRINDERS

KENT 8" X 18" MDL. KGS818AHD HYDRAULIC SURFACE GRINDER

HAND FEED SURFACE GRINDERS

VICTOR 9" X 16" HORIZONTAL BANDSAW

AUCTION

>ANGLE PLATE

SETS

<ROLL-IN JOURNEYMAN VERTICAL BANDSAW

BANDSAWSROLL-IN JOURNEYMAN VERT., variable blade spds., 24" x 24" tilting/sliding work-table, S/N 96005JM.

VICTOR 9" X 16" MDL. 916 HORIZ., 1-1/2 HP motor, coolant base, S/N J85952.

PRECISION INSTRUMENTSGAUGE BLOCKS; RADIUS DRESSER; 24" X 24" X 4" THK. GRANITE SURFACE PLATE; 36" X 60" X 6" THK. GRANITE SURFACE PLATE, on rolling fabricated stand; SCHERR-TUMICO OPTICAL COMPARATOR, 16" vert. beam, micrometer stage, 10X lens, S/N 2-1125; TOGO SHISEIKI ROCKWELL HARDNESS TESTER w/standards and accessories, S/N 738; MITUTOYO HEIGHTMASTER MDL. 515-310 HEIGHT GAUGE; 12" X 18" X 4" THK. GRANITE SURFACE PLATE.

MISCELLANEOUS MACHINERY6" DOUBLE END CARBIDE GRINDER w/tilting tbl.; BALDOR CATALOG NO. 500 CARBIDE GRINDER w/tilting tbl.; BALDOR 3/4 HP BENCH GRINDER, on fabricated stand; DAYTON DOUBLE-ENDED BUFFER; KING MACHINERY 6" BELT/8" DISC SANDER w/fabricated stand; DAYTON MDL. 3Z887 BLAST CABINET, approx. 24" x 42" x 24" ht., abrasive system; JET 3 T. CAP. MDL. 3 LEVER TYPE ARBOR PRESS, S/N 383730; GENERAC MDL. GP5000 PORTABLE GENERATOR, 5,000 watts, 6,250 starting watts, gasoline engine, on rolling frame.

ROTARY TABLESBISON 19-1/2" HORIZ.; YUASA 19-1/2" HORIZ./VERT.; BISON 19-1/2" HORIZ.; MEDA 8" HORIZ./VERT.; YUASA 10" HORIZ./VERT.

ANGLE PLATES(1 SET) 24"W. X 30"H. X 17"D., heavy fabricated design, drilled and tapped.

(1 SET) 18"W. X 30"H. X 20"D., heavy fabricated design, drilled and tapped.

MACHINE SHOP ACCESSORIES(2) KURT 8" H.D. MILLING VISES; (8) KURT 6" H.D. MILLING VISES; WIDE AR-RAY OF CAT-40 TAPER MILL TOOLING; YUASA 8" HORIZ./VERT. INDEXER; PRE-CISION GRINDING VISES; SPIN INDEX FIXTURES; 5C COLLETS; ANGLE PLATES; DRESSERS; SEVERAL H.D. 4 PT. DIE LIFT CARTS; WIDE ARRAY OF FABRICATED FRAME H.D. WORKBENCHES; YUASA 8" HORIZ./VERT. INDEXER w/tailstock; SINE PLATES; ADJ. ANGLE MILLING TBL.; CAST V BLOCKS; FACEMILLS; END-MILLS; (4) BRIDGEPORT RIGHT ANGLE MILLING ATTACHMENTS; BRIDGEPORT QUILLMASTER ATTACHMENT; SIDE MILLING CUTTERS; TAPER SHANK DRILLS; LETTER/NUMBER STENCILS; ABRASIVES; REAMERS; SPOTTING DRILLS; TAPS; MINUTEMAN BROACH SET; HAND TOOLS.

At the Premises of

TITAN TOOL & DIE COMPANY, INC.

10050 W. Gulf Bank Rd., HOUSTON, TX 77040(See Directions on Back Page)

BUYER’S PREMIUM: 15% ONSITE • 18% WEBCAST

OFFICE FURNITURE & EQUIPMENT

AVAYA MDL. 103H5(28) TELEPHONE SYSTEM W/(9) HANDSETS; EXECUTIVE WALNUT CONFERENCE TBL. W/CHAIRS; EXECUTIVE WALNUT U-SHAPED WORKSTATION; WAL-NUT EXECUTIVE DESK; MODULAR FORMICA STEEL COMPUTER WORKSTATION; OAK ROLL TOP DESK; MAXIMUM SAFE; FORMICA CONFERENCE TBL.; 4-DRAWER LETTER SIZE FILE CABINETS; HEWLETT-PACKARD DESIGN-JET 430 WIDE FORMAT PRINTER; BRUNING MDL. PD80 BLUEPRINT COPIER; SHARP COPI-ER MDL. MX-M200D, S/N 1308 3002; BROTHER MDL. FAX-2820 FAX MACHINE, S/N U61325-LON653411; PEPSI VENDING MACHINE W/KEY; BOOKSHELVES; TIMECLOCKS; REFRIGERA-TOR; MICROWAVE OVENS; BLUEPRINT FILING CABINET; SHOP VACUUMS; FLOOR POLISHER.

PICKUP TRUCK2001 CHEVROLET 1500 1/2 T. CAP., standard cab, auto. trans., cloth bench seat, AM/FM/cassette, white, odometer reads: 133,605, 265/75R16 tires, VIN 1GCEC14V41Z219131.

WOODEN EXECUTIVE DESKSCURTIS CHALLENGE RECIPROCATING AIR COMPRESSOR

A-FRAME RACK OF RAW MATERIALS

(1 OF 2) 3 T. CAP. ROLLING FRAME GANTRY CRANES

FORKLIFTSTOYOTA 10,000-LB. CAP. MDL. 7FGCU45, new 2011, LPG, 95" triple stage mast, 187" lift ht., cushion tires, side shift, 48" forks, S/N 71807.

CATERPILLAR 8,000-LB. CAP. MDL. T80C, LPG engine, shot 2-stage mast, 42"L. forks, cushion tires.

(2) HYSTER 5,000-LB. CAP., Mdl. S50FT, new 2011, LPG, 87" triple stage mast, 200" lift height, side shift, 42" forks, S/N F187V19753J and S/N F187V19267J.

KOMATSU CAP. MDL. FG25ST-4, LPG engine, 4,480-lb. cap. @ 24" L.C., 185" max. lift, 48" forks, cushion tires, dock lights, S/N 173919A.

MATERIAL HANDLING EQUIPMENT

3 T. CAP. ROLLING FRAME GANTRY CRANE, w/Harrington 3 T. cap. elec. chain hoist, Jet 5 T. cap. chain fall.

3 T. CAP. ROLLING FRAME GANTRY CRANE, w/Jet 3 T. cap. elec. chain hoist, Jet 2 T. cap. chain fall.

2 T. CAP. FABRICATED FRAME ROLLING GANTRY CRANE, w/Dayton 2 T. cap. elec. chain hoist, Jet 1 T. cap. chain fall.

(2) SETS OF H.D. FABRICATED SAW-HORSES.

RAW MATERIALSLARGE A-FRAME RACK W/ASSORTED STRUCTURAL AND BARSTOCK MATE-RIALS; LARGE DIA. FORGED RINGS AND BLANKS; HEAVY WALL TUBING.

CURTIS CHALLENGE AIR MDL. 5HT8 RECIPROCATING, 5 HP drive, 60 gal. horiz. tank.

SPEEDAIRE MDL. 1WD63, 7-1/2 HP drive, vert. tank mtd., 60 gal. vert. tank, S/N D056072.

AIR COMPRESSORSCURTIS CHALLENGE AIR MDL. 5HT8 RECIPROCATING, 5 HP drive, 60 gal. horiz. tank.

SPEEDAIRE MDL. 1WD63, 7-1/2 HP drive, vert. tank mtd., 60 gal. vert. tank, S/N D056072.

CATERPILLAR 8,000-LB. CAP. FORKLIFTTOYOTA 10,000-LB. CAP. FORKLIFT (1 OF 2) HYSTER 5,000-LB. CAP. FORKLIFTS

CHEVROLET 1500 1/2 T. CAP. PICKUP TRUCK

2011

AUCTION: WEDNESDAY, JANUARY 13 • 10:00 A.M.

INSPECTION: Tuesday, January 12

9:00 A.M. to 4:00 P.M.

& Morning of Sale

2011

QS-0029954

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

TOOL & DIE AND GENERAL MACHINING

FACILITYFeaturing: Lathes, Milling Machines, Grinders,

Fabricating Equipment, Support Machinery, Material Handling Equipment

& Much, Much More!

HOUSTON, TEXAS

AUCTION

PUBLIC INVITEDAUCTION: WED., JAN. 13 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.

ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.

Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until February 12, 2016.

In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.

Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.

The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART

OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.

Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to

BidSpotter on PMI’s website calendar. DO IT NOW.2. Either send wire transfer, or, overnight delivery service a

cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

DIRECTIONSFROM GEORGE BUSH AIRPORT: Exit airport using John F. Kennedy Blvd. Merge onto TX-8 W/N. Sam Houston Tollway W and proceed approximately 14 miles. Take the exit toward West Rd./Philippine St./Gulf Bank Rd. Stay on the feeder road and proceed thru the Philippine St. red light. Turn left onto W. Gulf Bank Rd. and proceed to auction site on the left hand side, 10050 W. Gulf Bank Rd., Houston, Texas 77040. Watch for auction signs.

LODGINGHilton Garden Inn .......................................................... (713) 896-6700 14919 Northwest Freeway, Houston, Texas 77040

La Quinta Inn ................................................................. (915) 888-3767 9034 West Sam Houston Parkway, Houston, Texas 77064

FINANCE YOUR AUCTION

PURCHASEConserve Your Cash &

Increase Your Bidding Power

AuctionLea$e Provides M&E Financing

With Approvals from $5,000 to $999,000

(800) 438-1470

Apply Online:www.AuctionLease.com