tools for the specialist hammer drills with sds-plus … · the hard metal drill bits are...
TRANSCRIPT
TOOLS FOR THE SPECIALISTHAMMER DRILLSWITH SDS-PLUS SHANK
MACHINE FEATURES
SDS-plus shank
Hydraulic or pneumatic type
Depth stopwith integrated rinsing connection
Handle withlever control
Type for underwater operationHydraulic type
ATEX-Safety Class
TECHNICAL SPECIFICATION
HAMMER DRILLS - SDS-plus shank
6.39.5
Weight
kgII2GcT6IM2cT6
ATEX
Guideline
94/9 EC
2 2404 00102 2408 0010
Order no.0.500.50
kW
Power
3,0003,000
Blows
per
minute
rpm2828
mm
Air
consumption
0.600.60
625625
rpm
Free
speed
9393
Noise
level
dB(A)4.54.5
Vibration
level
m/s²
Drilling up to 28 mm in concrete.Impact mechanismn can be switched on and off.
m³/min
Length incl.
drill chuck
410410
mm
Drilling
capacity
in concrete
Connection
inlet/outlet
R1/2“female/ R3/8“female
Rd 32 x 1/8“
Hose
ID
>10>10
mm
HAMMER DRILL - SDS-plus shank
6.3
Weight
kgII2GcT6
ATEX
Guideline
94/9 EC
2 2404 0040Order no.
0.50kW
Power
3,000
Blows
per
minute
rpm28mm
Air
consumption
0.60625rpm
Free
speed
93
Noise
level
dB(A)4.5
Vibration
level
m/s²
Drilling up to 28 mm in concrete.Impact mechanismn can be switched on and off.Usable as well under water.
m³/min
Length incl.
drill chuck
410mm
Drilling
capacity
in concrete
Connection
inlet/outlet
R1/2“female/ R3/8“female
Hose
ID
>10mm
HAMMER DRILL - SDS-plus shank
8.2
Weight
kg2 2406 0010Order no.
1.2kW
Power
3,400
Blows
per
minute
rpm28/50
mm
Oil
flow
15-45500rpm
Free
speed
92
Noise
level
dB(A)4.5
Vibration
level
m/s²
Drilling up to 28 mm in concrete.Impact mechanismn can be switched on and off.Usable as well under water.
l/min
Length incl.
drill chuck
460mm
Drilling capacity
concrete/masonry
Connection
3/4“-16 UNFHydraulic hose coupling : 1/2“ FF -Flat-Face coupling, ISO 16028, 1/2“BSP/BG2 Performance data at an operating pressure of 80 bar (cont. flow).
Performance data at an operating pressure of 6 bar (cont. flow).
Performance data at an operating pressure of 6 bar (cont. flow).
(Sub
ject
to c
hang
e w
ithou
t not
ice)
ACCESSORIES
Order no. dia. x overall length spiral length Order no. dia. x overall length spiral length Order no. dia. x overall length spiral length
mm mm mm mm mm mm9 2513 1550 5 x 160 100 9 2513 1610 12 x 160 100 9 2513 1680 20 x 300 2509 2513 1560 6 x 160 100 9 2513 1620 12 x 260 200 9 2513 1700 22 x 250 2009 2513 1570 8 x 160 100 9 2513 1630 14 x 160 100 9 2513 1710 22 x 450 4009 2513 1580 10 x 160 100 9 2513 1640 14 x 260 200 9 2513 1730 25 x 250 200
9 2513 1590 10 x 260 200 9 2513 1660 16 x 300 250 9 2513 1740 25 x 450 400
The hard metal drill bits are especially for drilling in concrete, masonry and natural stone.When drilling over 500 mm, drill a pilot hole of at least 150 mm with a shorter bit(of the same diameter).
DRILL BITS, SDS-plus shank, diameter 10 mm
ADDITIONAL ACCESSORIES
Order no.9 2902 0200
9 2902 0210
2 2406 9010
2 2406 9900
9 2406 0080
9 2406 0170
9 2406 0260
9 2406 0650
9 9910 0050
5 1212 9000
DescriptionQuick-release chuck
SDS-plus adapter for quick-release chuck
Hydraulic pressure hose set
Safety Block (inlet pressure up to 350 bar)
Service unit with filter and oiler for pipe installation
Service unit with filter, oiler and pressure regulator for pipe installation
Portable service unit with filter, oiler and pressure regulator
Portable service unit with protection housing, filter, oiler and pressure regulator
Carrying case
Carrying case
DRILLS WITH D-HANDLE
CORE DRILL UNITS
DRILLS PRODUCT RANGE
PISTOL DRILLS PISTOL HAMMER DRILLS
HAMMER DRILLSCORNER DRILLS
Maschinenfabrik GmbH, Fellerstraße 4, D-42555 Velbert, GermanyTel: +49-(0)2052-605-0 F a x : + 4 9 - ( 0 ) 2 0 5 2 - 6 0 5 - 2 9E-Mail: [email protected] Internet: http://www.spitznas.com 03
/13
E
Thread connection/ for type2 2404 / 2 2406 / 2 2408
2 2404 / 2 2406 / 2 2408
2 2406
2 2406
R 3/4’’i
R 3/4’’i
R 3/4’’i
R 3/4“a
2 2404, 2 2408
2 2406