top entry ball valves price list - apollo valves · top entry ball valves price list customer...

top entry ball valves price list

Customer Service (704) 841-60002

TEPL9000 (May 22, 2012)

table of contents

Warranty statement .................................................................................................................................................................................3

How to order, typical options ........................................................................................................................................................4-5

Class 150Class 150 Flanged .........................................................................................................................................................................................6

Class 150 Flanged Full Port .......................................................................................................................................................................7

Class 300Class 300 Flanged .........................................................................................................................................................................................8

Class 300 Flanged Full Port .......................................................................................................................................................................9

Class 300 Buttweld .....................................................................................................................................................................................12

Class 300 Buttweld Full Port ...................................................................................................................................................................13

Class 300 NPT, Socketweld, NPT x Socketweld ................................................................................................................................15

Class 300 NPT, Socketweld, NPT x Socketweld Full Port ....................................................................................................... 15-16

Class 600Class 600 Flanged .......................................................................................................................................................................................10

Class 600 Flanged Full Port .....................................................................................................................................................................11

Class 600 Buttweld .....................................................................................................................................................................................14

Class 600 NPT, Socketweld, NPT x Socketweld ................................................................................................................................16

Class 600 NPT, Socketweld, NPT x Socketweld Full Port ..............................................................................................................17

MisCellaneousValve Options ...............................................................................................................................................................................................18

Gear Operators ............................................................................................................................................................................................19

Seal Kits ................................................................................................................................................................................................... 20-23

Class 150 and 300 Seal Kits for Standard and “EB” Bonnet ..................................................................................................20

Class 150 and 300 Seal Kits for “FC” & “FL” Fugitive Emission Bonnet ..............................................................................21

Class 150 and 300 Seal Kits for “FG” & “FP” Fugitive Emission Bonnet .............................................................................22

Class 600 Seal Kits ..............................................................................................................................................................................23

Valve Parts .............................................................................................................................................................................................. 24-25



TEPL9000 (May 22, 2012)

Conbraco Industries, Inc. warrants, to its initial purchaser only, that its products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of FIVE years from the date of delivery to you, our initial purchaser. This warranty applies to Apollo brand product with “Made in the USA” markings only.

Should any failure to conform to this warranty appear within FIVE years after the date of the initial delivery to our initial purchaser, Conbraco will, upon written notification thereof and substantiation that the goods have been stored, installed, maintained and operated in accordance with Conbraco’s recommendations and standard industry practice, correct such defects by suitable repair or replacement at Conbraco’s own expense.

APOLLO INTERNATIONAL PRODUCTS: Conbraco Industries, Inc. warrants its International products, to its initial purchaser only, that its international products which are delivered to this initial purchaser will be of the kind described in the order or price list and will be free of defects in workmanship or material for a period of TWO years from the date of delivery to you, our initial purchaser.

THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OTHER WARRANTY OF QUALITY, WHETHER EXPRESSED OR IMPLIED, EXCEPT THE WARRANTY OF TITLE AND AGAINST PATENT INFRINGEMENT. Correction of non-conformities, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of Conbraco to our initial purchaser, with respect to the goods, whether based on contract, negligence, strict tort or otherwise. It is the intention of Conbraco Industries, Inc. that no warranty of any kind, whether expressed or implied shall pass through our initial purchaser to any other person or corporation.

LIMITATION OF LIABILITY: Conbraco Industries, inc. SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS, BUT NOT LIMITED TO, DAMAGES OR TO LOSS OF OTHER PROPERTY OR EQUIPMENT, LOSS OF PROFITS OR REVENUE, COST OF CAPITAL, COST OF PURCHASED OR REPLACEMENT GOODS, OR CLAIMS OF CUSTOMERS OF OUR INITIAL PURCHASER. THE REMEDIES OF OUR INITIAL PURCHASER, AND ALL OTHERS, SET FORTH HEREIN, ARE EXCLUSIVE, AND THE LIABILITY OF CONBRACO WITH RESPECT TO SAME SHALL NOT, EXCEPT AS EXPRESSLY PROVIDED HEREIN, EXCEED THE PRICE OF THE GOODS UPON WHICH SUCH LIABILITY IS BASED.

* It is the end user’s responsibility to confirm that items intended for use satisfy local codes and standards.

Warranty and limitations of liability

terms & conditions of salePayment: 2% 10th prox. Net 30 days. All prices F.O.B. Matthews, NC or Pageland, SC, with freight allowed on shipment with net weight of 750 pounds and over or $5,000 net to all shipping points within the United States, excluding Alaska and Hawaii. No freight will be allowed on Air Freight, Air Express, Parcel Post or UPS shipments. Claims for shortages must be made within 10 days of receipt of material. Our responsibility ends when a receipt is furnished us by the carrier. No invoice rendered for less than $50.00.

Products may be combined to make sufficient weight for full allowance. Phone order quoted prices are subject to correction. Prices and designs are subject to change without notice. Orders for material or special design or specification are made to customer’s order and are not subject to cancellation or return. Goods returned to us will not be accepted unless a full explanation has been made and our written authorized permission obtained. All goods returned — if accepted — will be credited at invoice price, less 30% for service and rehandling charges, plus shipping expenses. We reserve the right to adjust orders to box quantities.

All prices are subject to change without notice. This information is confidential. Failure on the part of the Representative or Distributor to exercise proper control over this information could result in the termination of existing contract agreements.

Throughout this price book, products that have a Lead Free* option will be identified with this logo.

* LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with CA AB1953, VT Act 193, MD HB372, LA HB471 and Federal Public Law 111-380.

**Any imported products are clearly identified as “Apollo International”.



TEPL9000 (May 22, 2012)

c s j a 4 bsbody Material triM Material Class, port, ends seat size options Model revision

C = Carbon Steel S = 316 SS Class 150 A = API-607 Certified, RPTFE Seat 3 = 1/2” AR = Actuator ReadyS = 316 SS Standard Port 2 = RTFE 4 = 3/4” BO = Flexible Graphile Seals & Packings

B = Flanged 5 = 1” BN = TFE Spiralwound Bonnet GasketA = Alloy 20 A = Alloy 20 Full Port 1 = TFE 7 = 1-1/2” BS = Flexible Graphile Spiral Wound Bonnet Gasket & Flexible Graphile PackingsB = CF3M SS* B = 316L SS E = Flanged 3 = RTFE Seat 8 = 2” CH = Clamp-On Steam Jacket - Stainless SteelF = Inconel D = Hastelloy C Stem, Class 300 4 = Carbon Graphite, 750°F max. 0 = 3” CJ = Clamp-On Steam Jacket - Carbon SteelH = Hastelloy C M35-1 Ball Standard Port 5 = 55% Bronze, 5% Moly, A = 4” CL = Cam-Lock HandleM = M35-1 H = Hastelloy C C = Flanged 6 = UHMWPE C = 6” EB = Extended BonnetN = Nickel M = M35-1 (Monel) D = NPT 7 = API-607 Certified, PTFE Seat E = 8” EO = Round HandleT = Titanium N = Nickel G = NPT x Socket Weld 8 = PEEK G = 10” FC = Live Loaded Fugitive Emission w/Double RPTFE Chevron Packings*Flanged Only T = Titanium N = Socket Weld 9 = Ceramic H = 12” FG = Fugitive Emission Bonnet with EVSP® 9000 Graphite Stem Packing

P = Buttweld B = 30% Carbon Reinforced PEEK FL = Fugitive Emission Bonnet with Double RPTFE Stem Packing R = FLG x Buttweld D = SRTFE, 60% SS, 40% TFE by weight FO = Full Jacketed w/Oversize Flanges S = RTJ Flanges (50% SS Min) FP = Live Loaded Fugitive Emission w/Double EVSP PackingsFull Port F = CRTFE GO = 2 1/4” Stem Extension 3 = Buttweld G = PCTFE HH = Vented Body F = Flanged H= High Temp Graphite, 1000°F max. HO= Vented Body & Cleaned for Chlorine Service L = NPT K = Stellite Ball & Seats HP = Vented Body & Cleaned for Hydrogen Peroxide Service M = Socket Weld M = Malcomized 316 SS Ball & Seats MG = Gear Operator Y = NPT x Socket Weld U = UHMWPE MT = 2 Position Lock Plate for Standard BonnetClass 600 MU = 2 Position Lock Plate for Extended BonnetStandard Port NC = NACE Certified Trim H = NPT OL = Oval Locking Handle J = Socket Weld OO = RPTFE Seals & Packings K = Flanged OM = RPTFE Bonnet Gasket & UHMWPE Packings Q = NPT x Socket Weld PJ = Partial Steam Jacket W = Buttweld PO = Cleaned for Oxygen ServiceFull Port PP = Cleaned for Industrial Gases 4 = NPT RS = Welded Ball Stop with Safety Cap 6 = NPT x Socket Weld TP = Two Position Sliding Latch Lock Lever 7 = Buttweld ZO = PTFE Seals & Packings T = Socket Weld U = FlangedClass 900Standard Port 9 = Flanged

How to specify apollo top entry ball ValvesPLEASE USE ALL DIGITS WHEN ORDERING.

See the Top Entry Catalog (TECA9000) for product details.



TEPL9000 (May 22, 2012)

c s j a 4 bsbody Material triM Material Class, port, ends seat size options Model revision

C = Carbon Steel S = 316 SS Class 150 A = API-607 Certified, RPTFE Seat 3 = 1/2” AR = Actuator ReadyS = 316 SS Standard Port 2 = RTFE 4 = 3/4” BO = Flexible Graphile Seals & Packings

B = Flanged 5 = 1” BN = TFE Spiralwound Bonnet GasketA = Alloy 20 A = Alloy 20 Full Port 1 = TFE 7 = 1-1/2” BS = Flexible Graphile Spiral Wound Bonnet Gasket & Flexible Graphile PackingsB = CF3M SS* B = 316L SS E = Flanged 3 = RTFE Seat 8 = 2” CH = Clamp-On Steam Jacket - Stainless SteelF = Inconel D = Hastelloy C Stem, Class 300 4 = Carbon Graphite, 750°F max. 0 = 3” CJ = Clamp-On Steam Jacket - Carbon SteelH = Hastelloy C M35-1 Ball Standard Port 5 = 55% Bronze, 5% Moly, A = 4” CL = Cam-Lock HandleM = M35-1 H = Hastelloy C C = Flanged 6 = UHMWPE C = 6” EB = Extended BonnetN = Nickel M = M35-1 (Monel) D = NPT 7 = API-607 Certified, PTFE Seat E = 8” EO = Round HandleT = Titanium N = Nickel G = NPT x Socket Weld 8 = PEEK G = 10” FC = Live Loaded Fugitive Emission w/Double RPTFE Chevron Packings*Flanged Only T = Titanium N = Socket Weld 9 = Ceramic H = 12” FG = Fugitive Emission Bonnet with EVSP® 9000 Graphite Stem Packing

P = Buttweld B = 30% Carbon Reinforced PEEK FL = Fugitive Emission Bonnet with Double RPTFE Stem Packing R = FLG x Buttweld D = SRTFE, 60% SS, 40% TFE by weight FO = Full Jacketed w/Oversize Flanges S = RTJ Flanges (50% SS Min) FP = Live Loaded Fugitive Emission w/Double EVSP PackingsFull Port F = CRTFE GO = 2 1/4” Stem Extension 3 = Buttweld G = PCTFE HH = Vented Body F = Flanged H= High Temp Graphite, 1000°F max. HO= Vented Body & Cleaned for Chlorine Service L = NPT K = Stellite Ball & Seats HP = Vented Body & Cleaned for Hydrogen Peroxide Service M = Socket Weld M = Malcomized 316 SS Ball & Seats MG = Gear Operator Y = NPT x Socket Weld U = UHMWPE MT = 2 Position Lock Plate for Standard BonnetClass 600 MU = 2 Position Lock Plate for Extended BonnetStandard Port NC = NACE Certified Trim H = NPT OL = Oval Locking Handle J = Socket Weld OO = RPTFE Seals & Packings K = Flanged OM = RPTFE Bonnet Gasket & UHMWPE Packings Q = NPT x Socket Weld PJ = Partial Steam Jacket W = Buttweld PO = Cleaned for Oxygen ServiceFull Port PP = Cleaned for Industrial Gases 4 = NPT RS = Welded Ball Stop with Safety Cap 6 = NPT x Socket Weld TP = Two Position Sliding Latch Lock Lever 7 = Buttweld ZO = PTFE Seals & Packings T = Socket Weld U = FlangedClass 900Standard Port 9 = Flanged

How to specify apollo top entry ball ValvesNOTE: NOT ALL OPTIONS LISTED ARE COMPATIBLE OR AVAILABLE. CONSULT FACTORY FOR AVAILABILITY OF UNLISTED OPTIONS.

NOTE: Optional Features may be used alone or in combination (simply added in alphabetical order), however not all combinations are available on all valves. This is a very limited list of the available options. Contact the factory for specific requirements and availability.

* MG is Generic for Gear Operators. Contact Factory or Price Book for Specific Application and Part No.® EVSP is a registered trademark of Garlock.

See the Top Entry Catalog (TECA9000) for product details.



TEPL9000 (May 22, 2012)

class 150 top entry ball Valves

Carbon steel

part no. Cs-b1Cs-b2

Cs-b3Cs-b5Cs-bF

Cs-b4*

Cs-b6Cs-bu

Cs-b7Cs-baCs-bd

*Cs-b8Cs-bb

Cs-b9*

seat style 1-tFe2-rtFe

3-rtFe5-brtFeF-CrtFe

CarbonGraphite uHMWpe

7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 800.19 840.48 1,108.38 836.95 891.26 1,021.42 POA 7.03/4 756.43 796.71 1,064.61 793.20 847.46 977.03 POA 7.11 800.19 840.48 1,108.38 836.95 891.26 1,021.42 POA 7.31-1/2 1,076.86 1,141.65 1,547.88 1,132.89 1,197.67 1,477.82 POA 12.72 1,392.01 1,483.08 2,025.88 1,470.83 1,570.61 1,880.55 POA 20.43 3,029.19 3,223.56 4,109.56 3,204.27 3,416.17 3,820.65 POA 46.04 4,477.27 4,832.72 5,809.72 4,799.44 5,167.14 5,920.05 POA 72.06 8,271.65 8,810.91 10,707.25 8,756.63 9,420.26 POA POA 191.08 ª 18,294.21 19,460.38 23,762.55 19,386.85 20,775.37 POA N/A 326.010 ª POA POA POA POA POA POA N/A 575.0

flangedClass 150

stainless steel

part no. ss-b1ss-b2

ss-b3ss-b5ss-bF

ss-b4*

ss-b6ss-bu

ss-b7ss-bass-bd

*ss-b8ss-bb

ss-b9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 967.37 1,006.89 1,269.80 1,003.46 1,056.72 1,183.87 POA 7.03/4 924.42 963.94 1,226.82 960.41 1,013.76 1,140.91 POA 7.11 967.37 1,006.89 1,269.80 1,003.46 1,056.72 1,183.87 POA 7.31-1/2 1,737.14 1,800.71 2,199.37 1,792.13 1,854.02 2,130.63 POA 12.72 1,991.45 2,082.54 2,613.46 2,068.77 2,166.71 2,472.57 POA 20.43 3,823.11 4,031.03 4,900.45 4,012.12 4,220.02 4,616.95 POA 46.04 6,056.84 6,402.20 7,360.99 6,369.55 6,730.39 7,469.26 POA 72.06 11,373.10 11,843.39 13,763.20 11,849.04 12,500.27 POA POA 191.08 ª 22,662.01 23,808.10 28,029.81 23,735.90 25,098.46 POA N/A 326.010 ª POA POA POA POA POA POA N/A 575.0

NOTE: 1/2” and 3/4” valves are full port.ª Gear operator or actuator recommended. It is a requirement for 10” valves. • 1/2” Flange bodies are not integral cast type, they are fabricated.* Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500°F or when using ceramic seats (#9). P.O.A. - Price On Application.

For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4" 6" 8" 10"Full port 1/2"-3/4" 1" 1.5" 2" 3" 4" 6" 8"list price adder 171.02 226.82 275.42 316.83 394.22 523.80 585.01 675.06

ball stop adderrs



TEPL9000 (May 22, 2012)

stainless steel - Full port

part no. ss-e1ss-e2

ss-e3ss-e5ss-eF

ss-e4*

ss-e6ss-eu

ss-e7ss-eass-ed

*ss-e8ss-eb

ss-e9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1 1,737.14 1,800.71 2,199.37 1,792.13 1,854.00 2,130.63 POA 10.61-1/2 1,991.45 2,082.54 2,613.46 2,068.77 2,166.71 2,472.57 POA 18.82 3,823.11 4,031.03 4,900.45 4,012.12 4,219.63 4,616.95 POA 42.23 6,053.40 6,402.25 7,360.99 6,369.55 6,730.37 7,469.26 POA 74.54 11,373.10 11,902.32 13,763.19 11,849.04 12,500.27 POA POA 168.76 ª 22,662.01 23,808.10 28,029.81 23,735.90 25,098.46 POA POA 309.08 ª POA POA POA POA POA POA POA 860.010 ª POA POA POA POA POA POA POA12 ª POA POA POA POA POA POA POA

ª Gear operator or actuator recommended. It is a requirement for 8” and larger valves. * Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500°F or when using ceramic seats (#9). P.O.A. - Price On Application.

For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4" 6" 8" 10" 12"Full port 1/2"-3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12"list price adder 171.02 226.82 275.42 316.83 394.22 523.80 585.01 675.06 POA POA

ball stop adderrs


Carbon steel - Full port

part no. Cs-e1Cs-e2

Cs-e3Cs-e5Cs-eF

Cs-e4*

Cs-e6Cs-eu

Cs-e7Cs-eaCs-ed

*Cs-e8Cs-eb

Cs-e9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic


flanged full PortClass 150



TEPL9000 (May 22, 2012)


stainless steel

part no. ss-C1ss-C2

ss-C3ss-C5ss-CF

ss-C4*

ss-C6ss-Cu

ss-C7ss-Cass-Cd

*ss-C8ss-Cb

ss-C9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 1,233.70 1,273.22 1,537.86 1,269.80 1,324.76 1,450.21 POA 8.13/4 1,097.98 1,139.20 1,402.10 1,134.05 1,189.03 1,314.47 POA 8.41 1,233.70 1,273.22 1,537.86 1,269.80 1,324.76 1,450.21 POA 10.81-1/2 2,137.23 2,201.08 2,599.73 2,192.48 2,256.05 2,530.98 POA 17.92 2,472.57 2,561.90 3,094.56 2,549.88 2,646.11 2,951.95 POA 24.53 4,859.20 5,065.40 5,936.56 5,048.20 5,256.13 5,653.05 POA 51.74 6,940.03 7,290.55 8,249.32 7,256.17 7,617.00 8,357.57 POA 88.06 12,507.14 13,034.65 14,897.24 12,983.09 13,634.33 POA POA 236.08 ª 24,313.25 25,459.30 29,681.06 25,387.14 26,748.00 POA N/A 385.210 ª POA POA POA POA POA POA N/A 651.512 ª POA POA POA POA POA POA N/A 1218.0

NOTE: 1/2” and 3/4” valves are full port.ª Gear operator or actuator recommended. It is a requirement for 10” valves. • 1/2” Flange bodies are not integral cast type, they are fabricated.* Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500°F or when using ceramic seats (#9).

P.O.A. - Price On Application.

For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4" 6" 8" 10" 12"Full port 1/2"-3/4" 1" 1.5" 2" 3" 4" 6" 8" 10"-12"list price adder 171.02 226.82 275.42 316.83 394.22 523.80 585.01 675.06 POA

ball stop adderrs

Carbon steel

part no. Cs-C1Cs-C2

Cs-C3Cs-C5Cs-CF

Cs-C4*

Cs-C6Cs-Cu

Cs-C7Cs-CaCs-Cd

*Cs-C8Cs-Cb

Cs-C9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 907.01 947.29 1,215.18 943.80 998.06 1,127.63 POA 8.13/4 852.74 893.02 1,162.65 889.49 945.54 1,073.35 POA 8.41 907.01 947.29 1,215.18 943.80 998.06 1,127.63 POA 10.81-1/2 1,183.66 1,248.43 1,654.67 1,239.70 1,302.72 1,584.65 POA 17.92 1,619.66 1,712.43 2,253.53 1,698.44 1,798.25 2,108.18 POA 24.53 3,398.66 3,610.53 4,496.52 3,593.02 3,803.13 4,207.61 POA 51.74 4,697.90 5,053.32 6,030.39 5,020.05 5,387.74 6,140.69 POA 88.06 9,928.06 10,467.34 12,363.68 10,413.07 11,076.70 POA POA 236.08 ª 21,367.19 22,535.10 26,837.27 22,461.54 23,850.08 POA N/A 385.210 ª POA POA POA POA POA POA N/A 651.512 ª POA POA POA POA POA POA N/A 1218.0

flangedClass 300



TEPL9000 (May 22, 2012)



part no. Cs-F1Cs-F2

Cs-F3Cs-F5Cs-FF

Cs-F4*

Cs-F6Cs-Fu

Cs-F7Cs-FaCs-Fd

*Cs-F8Cs-Fb

Cs-F9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic



part no. ss-F1ss-F2

ss-F3ss-F5ss-FF

ss-F4*

ss-F6ss-Fu

ss-F7ss-Fass-Fd

*ss-F8ss-Fb

ss-F9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic


ª Gear operator or actuator recommended. It is a requirement for 8” and larger valves. * Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500°F or when using ceramic seats (#9).


For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4" 6" 8" 10" 12"Full port 1/2"-3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12"list price adder 171.02 226.82 275.42 316.83 394.22 523.80 585.01 675.06 POA POA

ball stop adderrs




TEPL9000 (May 22, 2012)


stainless steel

part no. ss-K2ss-K3ss-K5ss-KF

ss-K4*

ss-K6ss-Ku

ss-Kass-Kz

*ss-K8ss-Kb

ss-K9*

seat style 2-rtFe3-rtFe

5-brtFeF-CrtFe

CarbonGraphite uHMWpe a-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 1,694.21 1,733.73 1,996.59 1,730.28 1,783.53 1,910.72 POA 14.83/4 1,580.80 1,620.31 1,883.19 1,616.87 1,670.15 1,797.31 POA 13.61 1,647.80 1,687.32 1,950.22 1,683.88 1,737.14 1,864.32 POA 15.41-1/2 3,026.02 3,091.15 3,489.77 3,080.82 3,144.38 3,421.04 POA 28.82 4,335.14 4,426.21 4,957.15 4,412.47 4,510.45 4,814.56 POA 42.73 6,738.98 6,946.89 7,816.33 6,927.99 7,135.91 7,532.82 POA 82.34 ª 10,239.05 10,587.86 11,546.64 10,555.22 10,916.07 11,654.89 POA 169.86 ª 21,806.30 22,335.55 24,198.13 22,284.00 23,462.72 POA POA

Note: 1/2” and 3/4” valves are full port.ª Gear operator or actuator recommended.• 1/2” Flange bodies are not integral cast type, they are fabricated.* Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500°F or when using ceramic seats (#9).


For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4" 6"Full port 1/2"-3/4" 1" 1.5" 2" 3" 4"list price adder 171.02 226.82 275.42 316.83 394.22 523.80

ball stop adderrs

Carbon steel

part no. Cs-K2Cs-K3Cs-K5Cs-KF

Cs-K4*

Cs-K6Cs-Ku

Cs-KaCs-Kd

*Cs-K8Cs-Kb

CsK9*


5-brtFeF-CrtFe


d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 1,399.03 1,439.31 1,707.20 1,435.80 1,491.84 1,619.66 POA 14.83/4 1,251.96 1,292.21 1,560.13 1,288.75 1,344.74 1,472.57 POA 13.61 1,307.99 1,348.25 1,616.16 1,344.74 1,399.03 1,528.60 POA 15.41-1/2 1,810.50 1,875.28 2,281.51 1,866.55 1,931.34 2,211.50 POA 28.82 2,491.66 2,582.72 3,125.49 2,570.44 2,670.25 2,980.17 POA 42.73 4,083.30 4,295.15 5,181.16 4,275.89 4,487.76 4,892.24 POA 82.34 ª 5,748.48 6,105.65 7,082.71 6,070.65 6,438.34 7,193.02 POA 169.86 ª 14,843.05 15,380.58 17,278.64 15,328.07 15,991.68 POA POA 397.7

flangedClass 600



TEPL9000 (May 22, 2012)



part no. Cs-u2Cs-u3Cs-u5Cs-uF

Cs-u4*

Cs-u6Cs-uu

Cs-uaCs-ud

*Cs-u8Cs-ub

Cs-u9*


5-brtFeF-CrtFe


d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1 1,810.50 1,875.28 2,281.51 1,866.55 1,931.34 2,211.50 POA 21.91-1/2 2,491.66 2,582.72 3,125.49 2,570.44 2,670.25 2,980.17 POA 41.12 4,083.30 4,295.15 5,181.16 4,275.89 4,487.76 4,892.37 POA 48.83 5,748.48 6,105.65 7,082.71 6,070.65 6,438.34 7,193.02 POA 141.64 14,843.05 15,380.34 17,278.64 15,328.07 15,991.68 POA POA 300.56 ª POA POA POA POA POA POA POA 575.08 ª POA POA POA POA POA POA POA 1305.0


part no. ss-u2ss-u3ss-u5ss-uF

ss-u4*

ss-u6ss-uu

ss-uass-uz

*ss-u8ss-ub

ss-u9*


5-brtFeF-CrtFe


d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1 3,027.56 3,091.15 3,489.77 3,080.82 3,144.38 3,421.04 POA 21.91-1/2 4,335.14 4,426.21 4,957.15 4,412.47 4,510.45 4,814.56 POA 41.12 6,738.98 6,946.89 7,816.33 6,927.99 7,135.91 7,532.82 POA 48.83 ª 10,239.05 10,587.86 11,546.64 10,555.22 10,916.07 11,654.89 POA 141.64 ª 21,806.30 22,335.55 24,198.13 22,284.00 23,462.72 POA POA 300.56 ª POA POA POA POA POA POA POA 575.08 ª POA POA POA POA POA POA POA 1305.0

ª Gear operator or actuator recommended. It is a requirement for 6” & larger valves.• 1/2” Flange bodies are not integral cast type, they are fabricated.* Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500˚F or when using ceramic seats (#9).


For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4" 6" 8" 10"Full port 1/2"-3/4" 1" 1.5" 2" 3" 4" 6" 8"list price adder 171.02 226.82 275.42 316.83 394.22 523.80 585.01 675.06

ball stop adderrs




TEPL9000 (May 22, 2012)


Carbon steel

part no. Cs-p1Cs-p2

Cs-p3Cs-p5Cs-pF

Cs-p4*

Cs-p6Cs-pu

Cs-p7Cs-paCs-pd

*Cs-p8Cs-pb

Cs-p9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 763.43 803.71 1,071.62 800.19 854.49 984.05 POA 3.73/4 815.98 856.25 1,125.90 852.74 908.79 1,036.61 POA 4.01 868.49 908.79 1,176.66 905.26 959.54 1,089.13 POA 4.21-1/2 1,148.66 1,213.42 1,619.66 1,204.68 1,269.48 1,549.60 POA 7.52 1,379.76 1,470.83 2,013.64 1,458.41 1,556.62 1,868.27 POA 14.03 2,952.14 3,164.02 4,050.01 3,146.49 3,356.64 3,761.09 POA 35.04 3,957.22 4,312.65 5,289.70 4,277.64 4,647.09 5,400.02 POA 50.86 ª 8,408.23 8,945.76 10,843.83 8,893.23 9,556.84 POA POA 140.08 ª 20,880.42 22,048.34 26,350.51 21,974.79 23,361.57 POA N/A 312.87

stainless steel

part no. ss-p1ss-p2

ss-p3ss-p5ss-pF

ss-p4*

ss-p6ss-pu

ss-p7ss-pass-pd

*ss-p8ss-pb

ss-p9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 860.85 900.36 1,163.25 896.94 950.21 1,077.34 POA 3.73/4 912.43 951.90 1,216.53 948.50 1,003.46 1,128.89 POA 4.01 922.44 1,003.46 1,266.34 1,000.04 1,053.28 1,180.44 POA 4.21-1/2 1,324.76 1,386.63 1,786.97 1,378.06 1,441.61 1,718.25 POA 7.52 1,627.18 1,718.25 2,249.19 1,704.50 1,802.45 2,106.59 POA 14.03 3,254.38 3,462.29 4,331.70 3,443.37 3,651.31 4,048.20 POA 35.04 4,881.55 5,232.06 6,190.87 5,197.72 5,558.54 6,299.10 POA 50.86 ª 9,476.17 10,003.65 11,871.42 9,952.23 10,603.31 POA POA 140.08 ª 23,316.67 24,462.71 28,665.58 24,390.57 25,770.32 POA N/A 312.8

Note: 300# Buttweld valves are available with schedule 10 or 40 ends designated by the addition of 10 or 40 to end of part number. 1/2” and 3/4” valves are full port.ª Gear operator or actuator recommended. * Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500˚F or when using ceramic seats (#9).


For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4" 6" 8"Full port 1/2"-3/4" 1" 1.5" 2" 3" 4" 6"list price adder 171.02 226.82 275.42 316.83 394.22 523.80 585.01

ball stop adderrs

butt WeldClass 300



TEPL9000 (May 22, 2012)



part no. Cs-31Cs-32

Cs-33Cs-35Cs-3F

Cs-34*

Cs-36Cs-3u

Cs-37Cs-3aCs-3d

*Cs-38Cs-3b

Cs-39*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.3 4,474.18 4,812.69 5,743.23 4,784.76 5,131.17 5,848.29 POA 67.64 9,455.30 9,968.91 11,774.93 9,917.21 10,549.24 POA POA 140.66 ª 20,349.72 21,462.00 25,559.29 21,391.98 22,714.36 POA POA 251.08 ª 36,281.97 38,493.19 41,743.33 POA 38,898.41 POA POA 860.0


part no. ss-31ss-32

ss-33ss-35ss-3F

ss-34*

ss-36ss-3u

ss-37ss-3ass-3d

*ss-38ss-3b

ss-39*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.3 6,609.96 6,943.36 7,856.49 6,910.65 7,254.29 7,959.59 POA 67.64 11,911.57 12,413.96 14,187.85 12,364.85 12,985.07 POA POA 140.66 ª 23,155.48 24,246.96 28,267.68 24,178.24 25,474.28 POA POA 251.08 ª 41,576.76 POA 48,351.56 POA 45,559.83 POA POA 860.0

Note: 300# Buttweld valves are available with schedule 10 or 40 ends designated by the addition of 10 or 40 to end of part number. Smaller sizes can be fabricated and are POA.ª Gear operator or actuator recommended. * Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500˚F or when using ceramic seats (#9).

P.O.A. - Price On Application. P.O.A. - Price On Application.

For Carbon and stainless onlystandard port 3" 4" 6" 8" 10"Full port 2" 3" 4" 6" 8"list price adder 316.83 394.22 523.80 585.01 675.42

ball stop adderrs

butt Weld full PortClass 300



TEPL9000 (May 22, 2012)


Carbon steel

part no. Cs-W2Cs-W3Cs-W5Cs-WF

Cs-W4*

Cs-W6Cs-WFCs-Wu

Cs-WaCs-Wd

*Cs-W8Cs-Wb

Cs-W9*


5-brtFeF-CrtFe

CarbonGraphite

6-uHMWpeF-CrtFe

uHMWpe

a-rtFed-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 985.79 1,026.08 1,293.98 1,022.58 1,076.86 1,206.43 POA 8.53/4 1,251.96 1,292.21 1,560.13 1,288.75 1,344.74 1,472.57 POA 8.11 1,307.99 1,348.25 1,616.16 1,344.74 1,399.03 1,528.60 POA 9.61-1/2 1,898.05 1,875.28 2,281.51 1,866.55 1,931.34 2,211.50 POA 17.42 2,491.66 2,582.72 3,125.49 2,570.44 2,670.25 2,980.17 POA 29.93 4,083.33 4,295.15 5,181.16 4,275.89 4,487.76 4,892.24 POA 51.94 ª 5,748.48 6,105.65 7,082.71 6,070.65 6,438.34 7,193.02 POA 136.46 ª 14,843.05 15,380.58 17,278.64 15,328.07 16,322.60 POA POA 273.5

stainless steel

part no. ss-W2ss-W3ss-W5ss-WF

ss-W4*

ss-W6ss-WFss-Wu

ss-Wass-Wd

*ss-W8ss-Wb

ss-W9*


5-brtFeF-CrtFe

CarbonGraphite

6-uHMWpeF-CrtFe

uHMWpe

a-rtFed-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 1,426.15 1,465.68 1,728.55 1,462.23 1,515.50 1,642.65 POA 8.53/4 1,580.80 1,620.31 1,883.19 1,616.87 1,670.15 1,797.31 POA 8.11 1,647.80 1,687.32 1,950.22 1,683.88 1,737.14 1,864.32 POA 9.61-1/2 3,027.56 3,091.15 3,489.77 3,080.82 3,144.38 3,421.04 POA 17.42 4,335.14 4,426.21 4,957.15 4,412.47 4,510.45 4,814.56 POA 29.93 6,738.98 6,946.89 7,816.33 6,927.99 7,135.91 7,532.82 POA 51.94 ª 10,239.05 10,587.86 11,546.64 10,555.22 10,916.07 11,654.89 POA 136.46 ª 21,806.30 22,335.55 24,198.13 22,284.00 23,462.72 POA POA 273.5

NOTE: 600# Buttweld valves have schedule 40 ends identified by 40 on the end of the part number. 1/2” and 3/4” valves are full port.ª Gear operator or actuator recommended. • 1/2” Flange bodies are not integral cast type, they are fabricated.* Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500˚F or when using ceramic seats (#9).


For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4" 6"Full port 1/2"-3/4" 1" 1.5" 2" 3" 4"list price adder 171.02 226.82 275.42 316.83 394.22 523.80

ball stop adderrs

butt WeldClass 600

REV 5/24/12



TEPL9000 (May 22, 2012)


Carbon steel “X” in table below = nPt (“d”), socket Weld (“n”), nPt x socket Weld (“G”)

part no. Cs-X1Cs-X2

Cs-X3Cs-X5Cs-XF

Cs-X4*

Cs-X6Cs-Xu

Cs-X7Cs-XaCs-Xd

*Cs-X8Cs-Xb

Cs-X9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 504.26 544.55 812.47 541.06 595.35 724.91 POA 3.93/4 504.26 544.55 812.47 541.06 595.35 724.91 POA 3.81 504.26 544.55 812.47 541.06 595.35 724.91 POA 3.51-1/2 640.84 705.64 1,111.88 696.90 761.71 1,041.85 POA 6.52 1,012.06 1,103.13 1,645.90 1,090.88 1,188.92 1,500.58 POA 11.13 2,603.69 2,815.56 3,701.57 2,796.31 3,008.18 3,412.67 POA 36.8

stainless steel “X” in table below = nPt (“d”), socket Weld (“n”), nPt x socket Weld (“G”)

part no. ss-X1ss-X2

ss-X3ss-X5ss-XF

ss-X4*

ss-X6ss-Xu

ss-X7ss-Xass-Xd

*ss-X8ss-Xb

ss-X9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 658.12 697.63 962.23 694.18 749.17 874.60 POA 3.93/4 658.12 697.63 962.23 694.18 749.17 874.60 POA 3.81 658.12 697.63 962.23 694.18 749.16 874.60 POA 3.51-1/2 881.47 945.03 1,343.67 936.46 1,000.04 1,274.95 POA 6.52 1,218.25 1,307.57 1,840.22 1,292.13 1,393.50 1,697.62 POA 11.13 2,766.39 2,978.76 3,843.72 2,955.39 3,163.31 3,560.23 POA 36.8

For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4"Full port 1/2"-3/4" 1" 1.5" 2" 3"list price adder 171.02 226.82 275.42 316.83 394.22

ball stop adderrs

Carbon steel - Full port “X” in table below = nPt (“l”), socket Weld (“m”), nPt x socket Weld (“y”)

part no. Cs-X1Cs-X2

Cs-X3Cs-X5Cs-XF

Cs-X4*

Cs-X6Cs-Xu

Cs-X7Cs-XaCs-Xd

*Cs-X8Cs-Xb

Cs-X9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1 710.40 772.09 1,158.98 763.77 825.49 1,092.28 POA 7.21-1/2 1,088.94 1,175.65 1,692.62 1,164.00 1,257.38 1,554.20 POA 12.02 2,629.80 2,828.96 3,675.37 2,813.25 3,165.76 3,400.24 POA 40.6

NOTE: 1/2” and 3/4” valves are full port.• 1/2” bodies and 1” - 2” full port bodies have reducers welded into ends.* Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500˚F or when using ceramic seats (#9).


nPt (code “d”), socket Weld (code “n”), nPt x socket Weld (code “G”)Class 300

nPt (code “l”), socket Weld (code “m”), nPt x socket Weld (code “y”) full PortClass 300



TEPL9000 (May 22, 2012)

class 300 & class 600 top entry ball Valves

stainless steel “X” in table below = nPt (“l”), socket Weld (“m”), nPt x socket Weld (“y”)

part no. ss-X1ss-X2

ss-X3ss-X5ss-XF

ss-X4*

ss-X6ss-Xu

ss-X7ss-Xass-Xd

*ss-X8ss-Xb

ss-X9*




7-tFea-rtFe

d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1 962.23 1,022.76 1,402.41 1,014.58 1,075.13 1,336.91 POA 7.21-1/2 1,304.22 1,392.59 1,899.90 1,377.86 1,474.43 1,764.08 POA 12.02 2,814.67 3,011.04 3,840.09 2,994.65 3,192.69 3,570.71 POA 40.6

Carbon steel “X” in table below = nPt (“H”), socket Weld (“j”), nPt x socket Weld (“Q”)

part no. Cs-X2Cs-X3Cs-X5Cs-XF

Cs-X4*

Cs-X6Cs-Xu

Cs-XaCs-Xd

*Cs-X8Cs-Xb

Cs-X9*


5-brtFeF-CrtFe


d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 896.48 938.51 1,206.43 933.29 989.31 1,117.10 POA 7.83/4 896.48 938.51 1,206.43 933.29 989.31 1,117.10 POA 7.71 896.48 938.51 1,206.43 933.29 989.31 1,117.10 POA 7.51-1/2 1,456.82 1,519.85 1,926.08 1,511.08 1,575.87 1,857.81 POA 13.52 1,626.68 1,719.46 2,262.28 1,705.43 1,805.25 2,116.94 POA 23.3

For Carbon and stainless onlystandard port 1" 1.5" 2" 3" 4"Full port 1/2"-3/4" 1" 1.5" 2" 3"list price adder 171.02 226.82 275.42 316.83 394.22

ball stop adderrs

stainless steel “X” in table below = nPt (“H”), socket Weld (“j”), nPt x socket Weld (“Q”)

part no. ss-X2ss-X3ss-X5ss-XF

ss-X4*

ss-X6ss-Xu

ss-Xass-Xd

*ss-X8ss-Xb

ss-X9*


5-brtFeF-CrtFe


d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1/2 • 1,262.93 1,302.42 1,565.33 1,565.33 1,353.98 1,479.40 POA 7.83/4 1,262.93 1,302.42 1,565.33 1,565.33 1,353.98 1,479.40 POA 7.71 1,262.93 1,302.42 1,565.33 1,565.33 1,353.98 1,479.40 POA 7.51-1/2 2,264.67 2,328.22 2,726.86 2,726.86 2,381.50 2,658.12 POA 13.52 2,417.57 2,508.64 3,039.59 3,039.59 2,592.84 2,896.97 POA 23.3

• 1/2” bodies have reducers welded into ends.* Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500˚F or when using ceramic seats (#9).


nPt (code “l”), socket Weld (code “m”), nPt x socket Weld (code “y”) full PortClass 300

nPt (code “H”), socket Weld (code “j”), nPt x socket Weld (code “Q”)Class 600



TEPL9000 (May 22, 2012)


stainless steel - Full port “X” in table below = nPt (“4”), socket Weld (“t”), nPt x socket Weld (“6”)

part no. ss-X2ss-X3ss-X5ss-XF

ss-X4*

ss-X6ss-Xu

ss-Xass-Xz

*ss-X8ss-Xb

ss-X9*


5-brtFeF-CrtFe


d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1 2,393.54 2,457.09 2,855.72 2,446.81 2,510.35 2,787.02 POA 14.21-1/2 2,572.22 2,663.28 3,194.24 2,577.36 2,747.49 3,051.61 POA 24.2

1” - 2” full port bodies have reducers welded into ends.* Ball stop is recommended with hard seats (#4, #8, and B). Ball stop is required above 500˚F or when using ceramic seats (#9).


Carbon steel - Full port “X” in table below = nPt (“4”), socket Weld (“t”), nPt x socket Weld (“6”)

part no. Cs-X2Cs-X3Cs-X5Cs-XF

Cs-X4*

Cs-X6Cs-Xu

Cs-XaCs-Xd

*Cs-X8Cs-Xb

Cs-X9*


5-brtFeF-CrtFe


d-srtFe

8-peeKb-Carbon

reinf-peeKCeramic

valve size (in.) Wt. lbs.1 1,561.90 1,624.90 2,031.15 1,616.16 1,680.93 1,962.86 POA 14.21-1/2 1,757.99 1,850.78 2,393.59 1,836.77 1,936.59 2,248.26 POA 24.2

For Carbon and stainless onlystandard port 1" 1.5" 2"Full port 1/2"-3/4" 1" 1.5"list price adder 171.02 226.82 275.42

ball stop adderrs

For Materials not inCluded in tHis priCe list, please ContaCt tHe FaCtory.At our USA Foundries, we cast: Carbon Steel & Low-Temp Carbon Steel Stainless Steels & Low-Carbon Stainless Steel Alloy 20 Duplex & Super Duplex Hastelloy Monel Nickel & Nickel-Copper Alloys Titanium

other alloy Valves and trim

nPt (code “4”), socket Weld (code “t”), nPt x socket Weld (code “6”) full PortClass 600



TEPL9000 (May 22, 2012)

Valve options

options list priCe adders For Class 150, 300 & 600 apollo® top entry valves

valve size (in.)std. port 1” 1-1/2” 2” 3” 4” 6” 8” 10” 12”

suffix Full port 1/2”-3/4” 1” 1-1/2” 2” 3” 4” 6” 8” 10” 12”AD 8.58 8.58 8.58 27.44 27.44 27.44 85.71 85.71 POA POAAR 2 59.41 63.02 66.60 95.40 113.40 142.22 185.40 STD POA POABB 25.20 32.41 43.22 54.03 66.48 100.85 189.07 459.23 POA POABN 19.80 25.19 37.81 66.60 114.31 155.16 POA POA POA POABS 10.82 16.21 23.40 27.01 34.23 59.41 84.60 POA POA POABT 48.59 48.59 70.21 91.80 199.80 POA POA POA POA POACL 1 135.02 156.62 187.20 N/A N/A N/A N/A N/A POA POADM 1,3 329.42 N/A N/A N/A N/A N/A N/A N/A POA POA

EB 1CS 156.62 217.80 275.42 370.82 547.20 1,159.25 2,034.09 N/A POA POASS 264.60 315.02 383.40 507.60 754.21 1,546.26 2,948.51 N/A POA POA

EO 1 34.23 37.81 48.59 N/A N/A N/A N/A N/A POA POA

FCCS 354.60 439.20 585.01 946.86 1,234.85 2,170.91 POA POA POA POASS 475.20 552.63 725.42 1,108.82 1,522.85 2,626.31 POA POA POA POA

FGCS 399.60 471.62 592.21 714.63 921.62 1,850.48 POA POA POA POASS 520.23 604.84 754.23 903.65 1,258.26 2,386.91 POA POA POA POA

FLCS 322.23 401.42 504.03 606.61 783.06 1,573.25 POA POA POA POASS 442.82 514.81 640.94 768.63 1,071.07 2,028.69 POA POA POA POA

FPCS 432.00 509.43 673.24 1,054.85 1,352.48 2,448.10 POA POA POA POASS 552.63 642.60 837.04 1,243.85 1,710.07 3,040.30 POA POA POA POA

GO 4 66.60 93.63 133.19 N/A N/A N/A N/A N/A POA POAHH 48.59 48.59 48.59 75.61 109.81 133.19 246.62 302.41 POA POAHO 55.80 55.80 55.80 91.80 122.41 147.62 270.00 325.81 POA POAHP 55.80 55.80 55.80 91.80 122.41 147.62 270.00 325.81 POA POAMT 5,6 N/A N/A N/A 160.23 163.81 217.80 POA N/A POA POAMU 1,7 N/A N/A N/A 162.01 172.79 232.21 295.49 N/A POA POANC 212.40 212.40 212.40 212.40 212.40 212.40 212.40 212.40 POA POAOL 8 84.60 108.00 133.19 N/A N/A N/A N/A N/A POA POAPO 52.21 52.21 52.21 86.41 118.80 136.80 255.61 302.41 POA POARS 171.02 226.82 275.42 316.83 394.22 523.80 585.01 675.06 POA POATP 86.41 108.00 133.19 N/A N/A N/A N/A N/A POA POAVC POA POA POA POA POA POA POA POA POA

1 Class 150 & 300 only.2 Bonnet mount only.3 170 in./lbs. output max., class 150 & 300 standard bonnet only. Consult factory for extended versions.4 Class 150: 1”, 1.5”, 2” (standard port) Class 300: 1”, 1.5”, 2” (standard port) Class 600: 1”, 2” (standard port)5 Standard bonnet only.6 Class 150 : 3”, 4”, 6” (standard port) ; 2”, 3”, 4” (full port) Class 300 : 3”, 4”, 6” (standard port) ; 2”, 3”, 4” (full port) Class 600 : 3”, 4” (standard port) ; 2”, 3” (full port)7 Extended or fugitive emissions bonnets only.8 Class 150 : 1”, 1.5”, 2” (standard port) ; 1”, 1.5” (full port) Class 300 : 1”, 1.5”, 2” (standard port) ; 1”, 1.5” (full port) Class 600 : 1” (standard port) ; 1/2”, 3/4” (full port)

POA - Price On Application.

REV 5/24/12



TEPL9000 (May 22, 2012)

Valve options

1, 2, 3, 5, 6, 7, a, u, z seats

suffixvalve size (in.)

4 6 8 10MG 1,015.24 1,396.85 1,693.85 2,325.71MH 1,168.25 1,551.56 1,846.87 2,478.70

* select next size larger for full Port.

Gear operator list Price adders*Class 150

Gear operatorsThe following list adders are to be Added to base valve prices when an option of the listed suffix is required.

1, 2, 3, 5, 6, 7, a, u, z seats


4 6 8 10MG 1,015.24 1,693.85 2,136.70 4,374.16MH 1,168.25 1,846.87 2,289.70 4,527.21



2, 3, 5, 6, a, u, z seats


4 6MG 1,396.85 2,125.88MH 1,549.84 2,278.89



4, 8, 9, b seats


4 6 8 10MJ 1,020.66 1,441.85 1,800.08 2,383.29MK 1,173.66 1,599.76 1,953.10 2,536.33



4, 8, 9, b seats


4 6 8 10MJ 1,020.66 1,740.67 2,194.30 POAMK 1,173.66 1,893.70 2,347.27 POA



4, 8, 9, b seats


4 6MJ 1,441.85 2,185.29MK 1,594.87 2,338.31





TEPL9000 (May 22, 2012)

seal Kits

Class 150 and Class 300 seal Kits For standard or “eb” bonnetvalve size (in.)

std. port 1” 1-1/2” 2” 3” 4” 6” 8” 10” 12”Kit type Full port 1/2”-3/4” 1” 1-1/2” 2” 3” 4” Consult Factory

SoftSeated

Seal Kits

ComponentsSeats,

Packaging,Gasket, &

(o-ring on 7& A Seat)

SS-015-ZO SS-017-ZO SS-018-ZO SS-010-ZO SS-01A-ZO SS-01C-ZO SS-01E-ZO SS-01G-ZO N/A142.11 240.64 316.44 397.91 642.34 1,021.32 1,703.45 POA N/A

SS-025-OO SS-027-OO SS-028-OO SS-020-OO SS-02A-OO SS-02C-OO SS-02E-OO SS-02G-OO SS-02H-OO142.11 240.64 316.44 397.91 642.34 1,021.32 1,703.45 POA POA

SS-035-BO SS-037-BO SS-038-BO SS-030-BO SS-03A-BO SS-03C-BO SS-03E-BO SS-03G-BO SS-03H-BO149.70 237.74 309.24 391.49 639.95 999.26 1682.09 POA POA

SS-055-BO SS-057-BO SS-058-BO SS-050-BO SS-05A-BO SS-05C-BO SS-05E-BO SS-05G-BO SS-05H-BO141.23 252.00 327.79 414.98 678.35 1,059.22 1,783.02 POA POA

SS-065-BO SS-067-BO SS-068-BO SS-060-BO SS-06A-BO SS-06C-BO SS-06E-BO SS-06G-BO SS-06H-BO149.70 252.00 327.79 414.98 678.35 1,059.22 1,783.02 POA POA

SS-075-BO SS-077-BO SS-078-BO SS-070-BO SS-07A-BO SS-07C-BO SS-07E-BO SS-07G-BO N/A164.86 267.16 342.96 447.19 754.14 1,184.26 1,940.30 POA N/A

SS-0A5-BO SS-0A7-BO SS-0A8-BO SS-0A0-BO SS-0AA-BO SS-0AC-BO SS-0AE-BO SS-0AG-BO SS-0AH-BO164.86 267.16 342.96 447.19 754.14 1,184.26 1,940.30 POA POA

SS-0D5-BO SS-0D7-BO SS-0D8-BO SS-0D0-BO SS-0DA-BO SS-0DC-BO SS-0DE-BO SS-0DG-BO SS-0DH-BO164.86 267.16 342.96 447.19 754.14 1,150.87 1,940.30 POA POA

SS-0F5-BO SS-0F7-BO SS-0F8-BO SS-0F0-BO SS-0FA-BO SS-0FC-BO SS-0FE-BO SS-0FG-BO SS-0FH-BO149.70 252.00 327.79 414.98 678.35 1,059.22 1,783.02 POA POA

SS-0U5-BO SS-0U7-BO SS-0U8-BO SS-0U0-BO SS-0UA-BO SS-0UC-BO SS-0UE-BO SS-0UG-BO SS-0UH-BO149.70 252.00 327.79 414.98 678.35 1,059.22 1,783.02 POA POA

PEEK Hard Seated

Seal Kits

Ball, Seats, Packing,

& Gaskets

SS-085-BO2 SS-087-BO2 SS-088-BO2 SS-080-BO2 SS-08A-BO2 SS-08C-BO 2 SS-08E-BO 2 SS-08G-BO2 SS-08H-BO2573.61 735.15 888.27 1,784.18 3,042.73 POA POA POA POA

SS-0B5-BO2 SS-0B7-BO2 SS-0B8-BO2 SS-0B0-BO2 SS-0BA-BO2 SS-0BC-BO2 SS-0BE-BO2 SS-0BG-BO2 SS-0BH-BO2573.61 735.15 888.27 1,784.18 3,042.73 POA POA POA POA

OtherHard

SeatedSeal Kits

Ball,Seats,

Packing,& Gasket

SS-045-BO SS-047-BO SS-048-BO SS-040-BO SS-04A-BO SS-04C-BO SS-04E-BO SS-04G-BO SS-04H-BO638.55 810.96 987.19 1,925.12 3,471.30 9,341.42 POA POA POA

SS-0H5-BO SS-0H7-BO SS-0H8-BO SS-0H0-BO SS-0HA-BO SS-0HC-BO SS-0HE-BO SS-0HG-BO SS-0HH-BOPOA POA POA POA POA POA POA POA POA

SS-095-BO SS-097-BO SS-098-BO SS-090-BO SS-09A-BO SS-09C-BO N/A N/A N/APOA POA POA POA POA POA N/A N/A N/A

seal Kits



TEPL9000 (May 22, 2012)

seal Kits

Class 150 and Class 300 seal Kits For “FC” and “Fl” FuGitive eMission bonnetsvalve size (in.)

std. port 1” 1-1/2” 2” 3” 4” 6” 8” 10” 12”Kit type Full port 1/2-3/4” 1” 1-1/2” 2” 3” 4” Consult Factory

SoftSeated

Seal Kits

ComponentsSeats,

Packaging,Gasket, &


SS-015-FL SS-017-FL SS-018-FL SS-010-FL SS-01A-FL SS-01C-FL SS-01E-FL SS-01G-FL N/A252.00 432.02 513.47 629.09 979.63 1,576.50 POA POA N/A

SS-025-FL SS-027-FL SS-028-FL SS-020-FL SS-02A-FL SS-02C-FL SS-02E-FL SS-02G-FL SS-02H-FL252.00 432.02 513.47 629.09 979.63 1,576.50 POA POA POA

SS-035-FL SS-037-FL SS-038-FL SS-030-FL SS-03A-FL SS-03C-FL SS-03E-FL SS-03G-FL SS-03H-FL261.49 443.39 524.85 646.13 1,015.60 1,614.38 POA POA POA



SS-075-FL SS-077-FL SS-078-FL SS-070-FL SS-07A-FL SS-07C-FL SS-07E-FL SS-07G-FL N/A276.65 458.57 540.03 678.35 1,089.53 1,739.44 POA POA N/A

SS-0A5-FL SS-0A7-FL SS-0A8-FL SS-0A0-FL SS-0AA-FL SS-0AC-FL SS-0AE-FL SS-0AG-FL SS-0AH-FL276.65 458.57 540.03 678.35 1,089.53 1,739.44 POA POA POA

SS-0D5-FL SS-0D7-FL SS-0D8-FL SS-0D0-FL SS-0DA-FL SS-0DC-FL SS-0DE-FL SS-0DG-FL SS-0DH-FL276.65 458.57 540.03 678.35 1,089.53 1,739.44 POA POA POA

SS-0F5-FL SS-0F7-FL SS-0F8-FL SS-0F0-FL SS-0FA-FL SS-0FC-FL SS-0FE-FL SS-0FG-FL SS-0FH-FL261.49 443.39 524.85 646.13 1,015.60 1,614.38 POA POA POA

SS-0U5-FL SS-0U7-FL SS-0U8-FL SS-0U0-FL SS-0UA-FL SS-0UC-FL SS-0UE-FL SS-0UG-FL SS-0UH-FL261.49 443.39 524.85 646.13 1,015.60 1,614.38 POA POA POA

PEEK Hard Seated

Seal Kits


& Gaskets

SS-085-FL2 SS-087-FL2 SS-088-FL2 SS-080-FL2 SS-08A-FL2 SS-08C-FL2 SS-08E-FL2 SS-08G-FL2 SS-08H-FL2683.50 926.52 1,085.33 2,002.71 3,380.03 POA POA POA POA

SS-0B5-FL2 SS-0B7-FL2 SS-0B8-FL2 SS-0B0-FL2 SS-0BA-FL2 SS-0BC-FL2 SS-0BE-FL2 SS-0BG-FL2 SS-0BH-FL2683.50 926.52 1,085.33 2,002.71 3,380.03 POA POA POA POA

OtherHard

SeatedSeal Kits

Ball,Seats,

Packing,& Gasket

SS-045-FL SS-047-FL SS-048-FL SS-040-FL SS-04A-FL SS-04C-FL SS-04E-FL SS-04G-FL SS-04H-FL750.37 1,002.37 1,184.26 2,156.31 3,808.58 9,896.62 POA POA POA

SS-0H5-FL SS-0H7-FL SS-0H8-FL SS-0H0-FL SS-0HA-FL SS-0HC-FL SS-0HE-FL SS-0HG-FL SS-0HH-FLPOA POA POA POA POA POA POA POA POA

SS-095-FL SS-097-FL SS-098-FL SS-090-FL SS-09A-FL SS-09C-FL N/A N/A N/APOA POA POA POA POA POA N/A N/A N/A

NOTE: Seat rings are only included with the #4 and #H seal kit for valves with stainless internals only. Consult factory for other alloys or when ball stop seals are needed. Visit our web site at www.conbraco.com for installation, operation and maintenance manuals.

POA - Price on application

seal Kits



TEPL9000 (May 22, 2012)

seal Kits

Class 150 and Class 300 seal Kits For “FG” and “Fp” FuGitive eMission bonnetsvalve size (in.)

std. port 1” 1-1/2” 2” 3” 4” 6” 8” 10” 12”Kit type Full port 1/2-3/4” 1” 1-1/2” 2” 3” 4” Consult Factory

SoftSeated

Seal Kits

ComponentsSeats,

Packaging,Gasket, &


SS-015-FG SS-017-FG SS-018-FG SS-010-FG SS-01A-FG SS-01C-FG SS-01E-FG SS-01G-FG N/A432.02 575.61 691.62 928.45 1,279.38 1,875.86 POA POA N/A

SS-025-FG SS-027-FG SS-028-FG SS-020-FG SS-02A-FG SS-02C-FG SS-02E-FG SS-02G-FG SS-02H-FG432.02 587.89 691.62 928.45 1,279.38 1,875.86 POA POA POA




SS-075-FG SS-077-FG SS-078-FG SS-070-FG SS-07A-FG SS-07C-FG SS-07E-FG SS-07G-FG N/A454.75 636.66 718.14 979.63 1,390.80 2,038.81 POA POA N/A

SS-0A5-FG SS-0A7-FG SS-0A8-FG SS-0A0-FG SS-0AA-FG SS-0AC-FG SS-0AE-FG SS-0AG-FG SS-0AH-FG454.75 636.66 718.14 979.63 1,390.80 2,038.81 POA POA POA

SS-0D5-FG SS-0D7-FG SS-0D8-FG SS-0D0-FG SS-0DA-FG SS-0DC-FG SS-0DE-FG SS-0DG-FG SS-0DH-FG454.75 636.66 718.14 979.63 1,390.80 2,038.81 POA POA POA

SS-0F5-FG SS-0F7-FG SS-0F8-FG SS-0F0-FG SS-0FA-FG SS-0FC-FG SS-0FE-FG SS-0FG-FG SS-0FH-FG439.61 623.41 704.88 947.43 1,315.01 1,913.78 POA POA POA

SS-0U5-FG SS-0U7-FG SS-0U8-FG SS-0U0-FG SS-0UA-FG SS-0UC-FG SS-0UE-FG SS-0UG-FG SS-0UH-FG439.61 623.41 704.88 947.43 1,315.01 1,913.78 POA POA POA

PEEK Hard Seated

Seal Kits


& Gaskets

SS-085-FG2 SS-087-FG2 SS-088-FG2 SS-080-FG2 SS-08A-FG2 SS-08C-FG2 SS-08E-FG2 SS-08G-FG2 SS-08H-FG2870.27 1,104.67 1,263.45 2,314.71 3,679.38 POA POA POA POA

SS-0B5-FG2 SS-0B7-FG2 SS-0B8-FG2 SS-0B0-FG2 SS-0BA-FG2 SS-0BC-FG2 SS-0BE-FG2 SS-0BG-FG2 SS-0BH-FG2870.27 1,104.67 1,263.45 2,314.71 3,679.38 POA POA POA POA

OtherHard

SeatedSeal Kits

Ball,Seats,

Packing,& Gasket

SS-045-FG SS-047-FG SS-048-FG SS-040-FG SS-04A-FG SS-04C-FG SS-04E-FG SS-04G-FG SS-04H-FG928.45 1,182.36 1,297.50 2,457.58 4,107.96 10,195.97 POA POA POA

SS-0H5-FG SS-0H7-FG SS-0H8-FG SS-0H0-FG SS-0HA-FG SS-0HC-FG SS-0HE-FG SS-0HG-FG SS-0HH-FGPOA POA POA POA POA POA POA POA POA

SS-095-FG SS-097-FG SS-098-FG SS-090-FG SS-09A-FG SS-09C-FG N/A N/A N/APOA POA POA POA POA POA N/A N/A N/A

seal Kits



TEPL9000 (May 22, 2012)

seal Kits

Class 600 seal Kitsvalve size (in.)

std. portseat number

1” 1-1/2” 2” 3” 4” 6” 8”Kit type Full port 1/2 - 3/4 1” 1-1/2” 2” 3” 4”

SoftSeated

Seal Kits

ComponentsSeats,

Packaging,Gasket, &


#278-914-01 78-917-01 78-920-01 78-1382-01 78-1383-01 78-1384-01 78-1898-01

161.09 261.49 341.07 426.32 822.35 1,224.06 POA

#378-915-01 78-918-01 78-921-01 78-1403-01 78-1404-01 78-1405-01 78-1899-01

168.66 272.85 368.94 443.39 858.37 1,261.95 POA

#578-1385-01 78-1386-01 78-1387-01 78-1388-01 78-1389-01 73-1390-01 78-1900-01

168.66 272.85 368.94 443.39 858.37 1,261.95 POA

#678-1852-01 78-1853-01 78-1854-01 78-1855-01 78-1856-01 78-1857-01 78-1901-01

168.66 272.85 368.94 443.39 858.37 1,261.95 POA

#A78-1394-01 78-1395-01 78-1396-01 78-1397-01 78-1398-01 78-1399-01 78-1902-01

183.92 286.12 365.70 475.60 932.26 1,387.02 POA

#F78-1858-01 78-1859-01 78-1860-01 78-1861-01 78-1862-01 78-1863-01 78-1903-01

168.66 272.85 368.94 443.39 858.37 1,261.95 POA

#D78-1864-01 78-1865-01 78-1866-01 78-1867-01 78-1868-01 78-1869-01 78-1904-01

183.92 286.12 365.70 475.60 932.26 1,387.02 POA

#U78-1870-01 78-1871-01 78-1872-01 78-1873-01 78-1874-01 78-1875-01 78-1905-01

168.66 272.85 368.94 443.39 858.37 1,261.95 POA

PEEK Hard Seated Seal Kits


& Gaskets

#878-1876-02 78-1877-02 78-1878-02 78-1879-02 78-1880-02 78-1881-02 78-1882-02

592.55 755.44 912.18 1,812.58 3,222.73 POA POA

#B78-1883-02 78-1884-02 78-1885-02 78-1886-02 78-1887-02 78-1888-02 78-1889-02

592.55 755.44 912.18 1,812.58 3,222.73 POA POA

OtherHard

SeatedSeal Kits

Ball,Seats,

Packing,& Gasket

#478-923-01 78-924-01 78-925-01 78-1400-01 78-1401-01 78-1402-01 78-1890-01

674.55 1,025.09 1,584.06 2,288.93 3,706.28 10,495.39 POA

#HConsult Factory For Part Numbers

POA POA POA POA POA POA POA

#978-1891-01 78-1892-01 78-1893-01 78-1894-01 78-1895-01 78-1896-01 Not Available

POA POA POA POA POA POA Not Available

NOTE: Seat rings are only included with the #4 and #H seal kit for valves with stainless internals only. Consult factory for other alloys or when ball stop seals are needed. Visit our web site at www.conbraco.com for installation, operation and maintenance manuals.

POA - Price on application

seal Kits



TEPL9000 (May 22, 2012)

Valve Parts

The following are individual replacement part prices only. Consult factory for exotic trim pricing.

valve size (in.)ball Material 1/2” - 1” 1-1/2” 2” 3” 4” 6” 8” 10”

StainlessSteel

K-3615-00 K-3627-00 K-3639-00 K-3651-00 K-3663-00 K-3675-00 K-3566-00 K-3707-00168.66 269.08 397.91 1,009.94 1,925.12 4,545.65 9,680.61 17,441.77

Alloy 20K-3618-00 K-3630-00 K-3642-00 K-3654-00 K-3666-00 K-3678-00 K-3562-00 K-3710-00

POA POA POA POA POA POA POA POA

Hastelloy CK-3617-00 K-3629-00 K-3641-00 K-3653-00 K-3665-00 K-3677-00 K-3563-00 K-3709-00


M35-1K-3619-00 K-3631-00 K-3643-00 K-3655-00 K-3667-00 K-3679-00 K-3564-00 K-3711-00


class 150 and class 300 balls (soft seats only)



StainlessSteel

G-3528-20 G-3748-20 G-3583-20 G-3162-20 G-3164-20 G-3167-20 G-3486-20 G-3623-2077.69 100.42 149.70 342.96 342.96 826.13 1,244.87 1,642.80

Alloy 20G-3531-20 G-3752-20 G-3585-00 G-3325-00 G-3358-20 G-3389-20 G-3482-20 G-3626-20


Hastelloy CG-3530-06 G-3751-06 G-3586-06 G-3333-06 G-3334-06 G-3361-06 G-3483-06 G-3625-06


M35-1G-3532-06 G-3750-06 G-3587-06 G-3328-06 G-3329-06 G-3360-06 G-3484-06 G-3627-06


class 150 and class 300 stems


valve size (in.)ball Material 1/2” - 1” 1-1/2” 2” 3” 4” 6” 8”

StainlessSteel

G-3534-20 G-3754-20 G-3589-20 G-3313-20 G-3314-20 G-3399-20 G-3599-2087.17 111.81 166.75 369.82 587.40 905.72 1,343.41

Alloy 20G-3537-20 G-3758-20 G-3591-00 G-3344-00 G-3448-20 G-3405-20 G-3601-20


Hastelloy CG-3536-06 G-3757-06 G-3592-06 G-3445-06 G-3449-06 G-3403-06 G-3602-06


M35-1G-3538-06 G-3756-06 G-3593-06 G-3446-06 G-3450-06 G-3404-06 G-3603-06


NOTE: Consult factory for titanium, nickel or ceramic part prices.

POA - Price On Application

class 150 and class 300 extended stems

NOTE: Select Next Larger size for Full Port Parts.



TEPL9000 (May 22, 2012)

Valve Parts

The following are individual replacement part prices only. See exotic trim for figuring adders to base valve prices.

valve size (in.)ball Material 1/2” - 1” 1-1/2” 2” 3” 4” 6”

StainlessSteel

K-3519-09 K-3521-09 K-3523-00 K-3651-00 K-3663-00 K-3675-00234.97 494.56 731.40 1,009.94 1,925.12 4,545.65

M35-1K-3723-09 K-3725-09 K-3727-09 K-3655-00 K-3667-00 K-3679-00

POA POA POA POA POA POA

class 600 balls


valve size (in.)ball Material 1/2” - 1” 1-1/2” 2” 3” 4” 6”

StainlessSteel

G-3596-20 G-3607-20 G-3595-20 G-3313-20 G-3314-20 G-3716-2094.75 147.59 225.06 369.51 587.40 905.72

M35-1G-3638-06 G-3639-06 G-3640-06 G-3446-06 G-3450-06 G-3720-06

POA POA POA POA POA POA

class 600 stems



SpiralwoundSS & Graph.

D-3182-00 D-3183-00 D-3184-00 D-3185-00 D-3186-00 D-3187-00 D-3188-00 D-3276-0017.06 49.29 62.54 96.63 142.11 208.45 284.24 587.40

GraphiteD-3167-00 D-3168-00 D-2361-00 D-3169-00 D-3170-00 D-3171-00 D-3004-00

N/A9.48 24.63 32.20 41.69 90.97 130.74 231.15

RTFED-3207-00 D-3208-00 D-3209-00 D-3210-00 D-3211-00 D-3212-00 D-3003-00 D-3279-00

9.48 22.73 28.44 37.90 87.17 125.05 225.49 POA

TFED-3201-00 D-3202-00 D-3203-00 D-3204-00 D-3205-00 D-3206-00 D-3002-00 D-3278-00

9.48 22.73 28.44 37.90 87.17 125.05 225.49 POA

class 150, 300, and 600 bonnet Gaskets



SS SeatHolder *

L-4496-06 L-4367-06 L-4368-06 L-4369-06 L-4370-06 L-4371-06 L-5169-05 L-5464-0524.63 28.44 41.69 75.81 157.59 238.75 POA POA

SS InnerRing **

L-4495-06 L-4378-06 L-4379-06 L-4380-06 L-4381-06 L-4382-06 L-5219-05 L-5470-0522.92 24.63 28.44 39.79 51.17 155.39 POA POA

SS SeatHolder ª

L-4901-00 L-4902-00 L-4903-06 L-4904-00 L-4905-05 L-4906-00 L-5163-05 L-5476-0587.17 128.83 168.66 263.41 377.08 846.96 POA POA

NOTE: Consult factory for titanium, nickel or ceramic part prices.* Used in 1, 2, 3, 5, 6, 8, B, C, D and U seat designs.** Used in 3, 5, 6, 8, B, C and D seat designs.ª Used for API607 (7, A and Z) seat designs.

POA-Price On Application

class 150, 300, and 600 seat components (metallic Parts)

NOTE: Select Next Larger size for Full Port Parts.

phone: (704) 841-6000Fax: (704) 841-6020

sales & CustoMer serviCe:

tepl9000 5/12

to find a sales rep close to you, contact our Customer service department

or visit our Website www.apollovalves.com

REVISIONS

Page 14 May 24, 2012 Price Corrected: 6” CS-WA had decimal error.Page 18 May 24, 2012 Column #1: Edited superscripted notes. Page Bottom: Edited Notes.

top entry ball valves price list - apollo valves · top entry ball valves price list customer...

Documents