torpedo encapsulator sloperiser pump model 40srpflow rates of 24 to 55 gpm (90.8 to 208.2 lpm). •...
TRANSCRIPT
manufacturer of sloperiser pumps, control panels & flow meters
To Order Call 1-888-512-1110 35EnvironmentalPumpSolutions.com
EPS submersible pumps are made of stainless steel and fitted with teflon seals and bearings to handle the rigors of contaminated groundwater pumping and continuous operation in landfill/remediation applications. Built to deliver optimum efficiency during periods of high demand, all EPS pumps provide low, long-term operating costs and high operating reliability.
EPS environmental submersibles meet government guidelines for environmental equipment and have been proven through extensive use in the field.
FEATURES• Made For 12" and Larger Wells
Flow rates of 24 to 55 GPM (90.8 to 208.2 LPM).
• State-of-the-art HydraulicsPump efficiency is maximized by constant improvement of the high-performance hydraulic design, and precise manufacturing process.
• Manufactured With High-grade Stainless SteelRugged stainless steel construction inside and out resists corrosionand attack from aggressive liquids.
• Wear-resistant DesignDesigned to flush abrasive particles from the pump, and made fromstainless steel to resist wear caused by abrasives.
• Built-in Check ValvePrevents back-flow into the well once the pump is shut down.
• 1 to 20 HP MotorsStainless steel construction and quality design.
• Motor Controls and ProtectionAvailable controls to protect the motor against burnout anddry-running, plus the ability to monitor the system allowing theuser to optimize settings.
Torpedo Encapsulator Sloperiser Pump Model 40SRP
manufacturer of sloperiser pumps, control panels & flow meters
To Order Call 1-888-512-1110 36EnvironmentalPumpSolutions.com
EPS vertical drawdown pumps are made of stainless steel and fitted with teflon seals and bearings to handle the rigors of contaminated groundwater pumping and continuous operation in landfill/remediation applications. Built to deliver optimum efficiency during periods of high demand, all EPS pumps provide low, long-term operating costs and high operating reliability.
EPS vertical drawdowns meet government guidelines for environmental equipment and have been proven through extensive use in the field.
FEATURES• Made For 10" and Larger Wells
Flow rates of 24 to 55 GPM (90.8 to 208.2 LPM).
• State-of-the-art HydraulicsPump efficiency is maximized by constant improvement of the high-performance hydraulic design, and precise manufacturing process.
• Manufactured With High-grade Stainless SteelRugged stainless steel construction inside and out resists corrosionand attack from aggressive liquids.
• Wear-resistant DesignDesigned to flush abrasive particles from the pump, and made fromstainless steel to resist wear caused by abrasives.
• Built-in Check ValvePrevents back-flow into the well once the pump is shut down.
• 1 to 20 HP MotorsStainless steel construction and quality design.
• Motor Controls and ProtectionAvailable controls to protect the motor against burnout anddry-running, plus the ability to monitor the system allowing theuser to optimize settings.
Vertical Drawdown Pump Model 40VSP
• Special Modifications virtually eliminate air locking
manufacturer of sloperiser pumps, control panels & flow meters
To Order Call 1-888-512-1110 37EnvironmentalPumpSolutions.com
Specifications subject to change without notice.4" motor standard, .5-5 HP/3450 RPM.6" motor standard, 7.5-10 HP/3450 RPM.*Also available with 6" motor.DS = Deep Set model version for high head requirements.Performance conforms to ISO 9906 Annex A @ 10 ft. minimum submergence.
40SRP200-66DS (20 HP)
40SRP200-58DS (20 HP)
40SRP200-50DS (20 HP)
40SRP150-44DS (15 HP)
40SRP150-37DS (15 HP)
40SRP100-30 (10 HP)*
40SRP75-25 (7 1/2 HP)*
40SRP75-21 (7 1/2 HP)*
40SRP50-15 (5 HP)
40SRP50-12 (5 HP)
40SRP30-9 (3 HP)
40SRP20-7 (2 HP)
40SRP15-5 (1 1/2 HP)
40SRP10-3 (1 HP)
Model 40SRPF
FLOW RANGE: 24 - 55 GPM
40 GPM
OUTLET SIZE: 2" NPT
Performance Curves
NOMINAL DIA. 4"
manufacturer of sloperiser pumps, control panels & flow meters
To Order Call 1-888-512-1110 38EnvironmentalPumpSolutions.com
DIMENSIONS & WEIGHTS
Model 40SRP 40 GPM Technical Data
Motor Dimensions ApproximateSize Discharge A B C D E Shipping Wt.
Model No. HP In. Size In. In. In. In. In. Lbs.
40SRP10-3 1 4 2" NPT 32.6 11.8 12.8 3.8 6.5 37
40SRP15-5 1½ 4 2" NPT 37.7 13.6 16.1 3.8 6.5 42
40SRP20-7 2 4 2" NPT 42.5 15.1 19.4 3.8 6.5 46
40SRP30-9 3 4 2" NPT 51.3 20.6 22.7 3.8 6.5 70
40SRP50-12 5 4 2" NPT 59.3 23.6 27.7 3.8 6.5 83
40SRP50-15 5 4 2" NPT 64.2 23.6 32.6 3.8 6.5 89
40SRP75-21* 7½ 4 2" NPT 82.6 29.6 45 3.8 6.5 125
40SRP75-25* 7½ 4 2" NPT 89.2 29.6 51.6 3.8 6.5 129
40SRP100-30* 10 4 2" NPT 111.7 43.9 59.8 3.8 6.5 186
40SRP150-37DS 15 6 2" NPT 107.5 28 71.5 5.4 8.5 249
40SPR150-44DS 15 6 2" NPT 119 28 83 5.4 8.5 345
40SRP200-50DS† 20 6 2" MPT 144 30.6 105.4 5.4 8.5 324
40SRP200-58DS† 20 6 2" MPT 157.2 30.6 118.6 5.4 8.5 339
40SRP200-66DS† 20 6 2" MPT 170.4 30.6 131.8 5.4 8.5 399
NOTES: All models suitable for use in 4" (10 cm) wells, unless otherwise noted.Weights include pump end with motor in lbs.*Also available with 6" (15 cm) motor.†Built into sleeve 2" MPT discharge, 6" (15 cm) minimum well diameter.
NOTES: Specifications are subject to change without notice.Vectra® is a registered trademark of Hoechast Calanese Corporation.
COMPONENT CYLINDRICAL SHAFT (3-44 Stgs.) DEEP SET (50-66 Stgs.)Check Valve Housing 304 Stainless Steel Sta3 in0 l4 e ss Steel
304 Stainless Steel304 Stainless SteelCheck Valve304 Stainless Steel304 Stainless SteelDiffuser Chamber304 Stainless Steel304 Stainless SteelImpeller
Suction Interconnector 304 Stainless Steel Sta3 in0 l4 e ss Steel304 Stainless Steel304 Stainless SteelInlet Screen431 Stainless Steel431 Stainless SteelPump Shaft304 Stainless Steel304 Stainless SteelStraps304 Stainless Steel304 Stainless SteelCable Guard304 Stainless Steel304 Stainless SteelPriming Inducer316 Stainless Steel316 Stainless SteelCoupling
Teflon/316 Stainless SteelCheck Valve Seat Teflon/316 Stainless SteelTop Bearing Teflon /316 Stainless SteelImpeller Seal R i n g Teflon /316 Stainless SteelIntermediate B e a r i n g s Teflon /316 Stainless Steel
Teflon/316 Stainless SteelTeflon/316 Stainless SteelTeflon/316 Stainless Steel
Shaft Uthrust Washer Teflon Teflon 304 Stainless Steel304 Stainless SteelSplit Cone304 Stainless Steel304 Stainless SteelSplit Cone Nut316 Stainless SteelNot RequiredSleeve304 Stainless SteelNot RequiredSleeve Flange
MATERIALS OF CONSTRUCTION
A
E
C
B
2”
D