toshibadiagramas.diagramasde.com/laptop-notebook/notebook...toshiba tough enough for today’s world...
TRANSCRIPT
Tough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
GENERAL INFORMATION
Before attempting any of the following procedures,make sure that the main battery and AC adaptor is not connected to the unit and the environment in
which you are working on is protected fromElectro-Static Discharge(ESD).
TOSHIBA
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 1)
2. 3mm Flat head Screwdriver
3. Case Separator
4. ESD Wrist Strap
5. ESD mats
6. Tweezers
SatelliteTM
TOSHIBATough Enough for Today’s World
TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. HDD REMOVAL
4. MEMORY MODULE REMOVAL
5. MINI PCI CARD REMOVAL
6. MODEM BOARD REMOVAL
7. KEYBOARD REMOVAL
8. TOP COVER REMOVAL
9. CD-R/W/DVD-ROM DRIVE REMOVAL
10. SPEAKER(WOOFER) REMOVAL
11. SOUND BOARD REMOVAL
12. BATTERY BOARD REMOVAL
13. RTC REMOVAL
14. SECURE DIGITAL(SD) BOARD REMOVAL
15. VIDEO BOARD REMOVAL
16. COOLING MODULE REMOVAL
17. CPU REMOVAL
18. SYSTEM BOARD REMOVAL
19. TOUCHPAD REMOVAL
20. INTERFACE BOARD REMOVAL
21. CD CONTROL/SUB LCD REMOVAL
22. SENSOR SWITCH REMOVAL
23. SPEAKERS REMOVAL
24. 15’’ DISPLAY MASK REMOVAL
25. FL INVERTER AND 15’’ LCD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series Satellite
TM
BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL
TOSHIBATough Enough for Today’s World
1. Turn the computer upside down as shown.2. Slide the battery release lever in the direction of the arrow. 3. Lift out the battery pack.4. Separate the battery pack from the battery cover.
1. Press the eject button of the PC Card you want to remove.2. Press the extended eject button to pop the PC card out slightly.3. Grasp the PC Card and pull it out
HDD REMOVAL
3. Grasp the HDD bracket handle and pull to disconnect the HDD assembly.4. Lift the HDD assembly out of the HDD bay.
1. Turn the computer upside down. 2. Remove one M2.5x4 black flat head screw securing HDD slot cover and pull out the cover.
.
NOTE: Before removing any PCMCIA device, make sure it is “STOPPED” in the PC Card Manager.
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
PC Card
Eject button
SatelliteTM
Batteryrelease lever
Battery pack
M2.5x4 black flat head screw
HDD cover
HDD assyHDD bracket handle
MEMORY MODULE REMOVAL
MEMORY MODULE REMOVAL
1. Turn the computer upside down. 2. Remove two M2.5x4 black flat head screws securing the memory cover.3. Lift out the cover.
TOSHIBATough Enough for Today’s World
MINI PCI CARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
HDD REMOVAL
5. Remove four M3x4 brass flat head screws securing the HDD bracket to the drive.
M3x4 Flat head screws
HDD bracket
4. Gently press out on the memory clips and pull the memory module out of the connector on a 30 degree angle.
SatelliteTM
M2.5x4 black flat head screws
Memoryslot cover
Memorymodule
Memory clips
1. Turn the computer upside down.2. Remove three M2x3 black screws securing the Mini PCI slot cover.
Mini PCI slotcover
M2x3 black screws
MODEM BOARD REMOVAL
MODEM BOARD REMOVAL
MINI PCI CARD REMOVAL
1. Remove one M2x3 black screw securing the modem slot cover.2. Insert your finger nail or the case separator into the notched side of the cover and lift up to release the latch securing the modem slot cover.
TOSHIBATough Enough for Today’s World
1. Open the display panel.2. Remove the keyboard holder at the top of the keyboard.
KEYBOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
3. Disconnect the black and white coax cables from the mini PCI wireless LAN card.4. Gently press out the Mini PCI slot clips and pull the Mini PCI wireless LAN card out of the connector on a 30 degree angle.NOTE: The mini PCI wireless LAN card is optional for the 5100 series.
3. Disconnect the MJ harness from JP1 on the modem board.4. Remove two M2x3 black screws securing the modem board.5. Lift up the modem board to disconnect it from the system board.
Latch
Keyboard holder
SatelliteTM
Wireless LAN cardPCI clips
Black/whitemini coax
Modem slot cover M2x3 black flat head screws
M2x3 black screws
Modem
MJ Harness
4. Lift out the keyboard and set it on the palm rest.5. Disconnect the keyboard cable from PJ113 on the system board and lift out the keyboard.
KEYBOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
TOSHIBATough Enough for Today’s World
3. Remove two M2.5x2.8 black flat head screws securing the keyboard.
M2.5x2.8 black flat head screws
TOP COVER REMOVAL
1. Turn the computer upside down.2. Disconnect the modem/LAN harness from PJ108 on the system board and remove it from the base assembly.
SatelliteTM
PJ113Keyboardcable
Keyboard
M2.5x25 black screws
M2.5x6 black flat head screws
M2.5x16black screws
M2.5x4 blackflat head screw
M2x3 Blackscrews
3. Remove the following seventeen screws from the bottom cover: - 6 M2.5x16 black screws - 2 M2.5x25 black screws - 6 M2.5x6 black flat head screws - 2 M2x3 black screws - 1 M2.5x4 black flat head screw
Modem/LAN harness
TOSHIBATough Enough for Today’s World
TOP COVER REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
M2x6 brass screws M2x3 black screw
CD-R/W/DVD-ROM side bracket
CD-R/W/DVD-ROM bracket
CD-R/W/DVD-ROM connectorCD-R/W/DVD-ROM drive
2. Remove one M2x3 black screw securing the side bracket and lift out the bracket.3. Remove two M2x6 brass screws securing the CD-R/W/ DVD-ROM connector and the bracket.4. Remove the connector and the bracket.
8. Disconnect the LCD/FL cable from PJ203 and PJ204 on the video board. 9. Disconnect the mini coax cable frrom the HDD/battery board.10. Disconnect the interface cable and the CD control/ touch pad cable from PJ124 and PJ114 on the system board. Lift out the top cover assembly.
Membraneswitch
PJ103
SatelliteTM
CD-R/W/DVD-ROM DRIVE REMOVAL
1. Slide the CD-R/W/DVD-ROM drive to the right to disconnect it from PJ106 on the system board.
4. Turn the computer right side up and open the LCD panel.5. Remove one M2x4 brass screw securing the KB plate and lift out the KB plate.6. Remove two M2.5x16 black screws and two M2x6 brass screws securing the top cover. 7. Disconnect the power/internet/in-touch/cover sensor membrane switch from PJ103, the left and right speaker cables from PJ120/PJ121 on the system board.
KB plate assembly
M2x4 brass screwM2x6 brass screws
M2.5x16black screws
PJ120PJ121
Left/rightspeaker cables
Interface cable
CD control/touchpad cable
LCD/FL cable
PJ203
PJ124
PJ114
PJ204
Mini coax cable
PJ106 CD-R/W/DV-ROM drive
TOSHIBATough Enough for Today’s World
SOUND BOARD REMOVAL
1. Remove two M2x4 black flat head screws securing the sound board.2. Lift out the sound board and disconnect the sound cable (FMZFL1) from PJ1100 on the sound board.
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
RTC REMOVAL
1. Remove the glass tapes securing the battery harness and RTC battery.2. Disconnect the RTC battery harness from PJ8752 on the system board.3. Lift the RTC battery out of the slot.
SatelliteTM
SPEAKER(WOOFER) REMOVAL
1. Peel off the glass tape securing the woofer harness.2. Disconnect the woofer harness from PJ1106 on the sound board.3. Lift out the speaker(woofer).
woofer harness Glass tape
Speaker(woofer)
PJ1106 M2.5x4 black flat head screws
Sound board
Sound cable
BATTERY BOARD REMOVAL
1. Remove one hex screw securing the battery board.2. Remove two M2x6 brass screws securing the cpad cover and lift out the cover.3. Disconnect the two battery board harnesses from PJ1000 and PJ10001 on the battery board.4. Lift out the battery board assembly.
M2x6brassscrews
Battery harnesses Cpad cover
Hex screw
RTC batteryPJ8752 RTC battery harness
CPU REMOVALCOOLING MODULE REMOVAL
1. Disconnect the fan harness from PJ8770 on the system board. 2. Remove three M2x8 brass screws and securing the cooling module to the system board.3. Peel off the glass tape securing the DC harness and lift out the cooling module.
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
TOSHIBATough Enough for Today’s World
VIDEO BOARD REMOVAL
1. Remove one hex screw securing the HDD con plate and lift out the plate.2. Disconnect the video board from system board.
SatelliteTM
SECURE DIGITAL(SD) BOARD REMOVAL
1. Remove one M2x4 brass screw securing the SD support plate and the sound FIR board.2. Remove the SD support plate and lift up the back side of the sound/FIR board to disconnect it from PJ601 on the system board.
M2x4 brass screwSD support plate
Sound/FIRboard
HDD con plate Hex screw
Video board
Fan harness Cooling module
M2x8brass screws
PJ8770
Glass tape
CPU
1. Insert a flat head screwdriver in the CPU lock and rotate it counter-clockwise to unlock the CPU.2. Lift out the CPU.
NOTE: When installing the CPU, make sure that a silicone grease is applied before attaching the heat sink. Please refer to FSB-200112 for the complete procedures on how to apply the silicone grease.
CPUlock
Silicone grease
OpenClose
TOSHIBATough Enough for Today’s World
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
INTERFACE BOARD REMOVAL
4. Remove one M2.5x4 flat head black screw securing the system board. 5. Lift out the system board.
1. Disconnect the touchpad cable from PJ15, the interface cable from PJ10, the sub LCD cable from PJ13 and the sub LCD power harness from PJ12. 2. Remove one M2x4 brass screw securing the interface board.3. Lift out the interface board.
Interfacecable
Touchpad cable
Sub LCD power harnessSub LCD cable
M2x4 brass screw
Interfaceboard
SatelliteTM
PJ10
PJ13
PJ12
PJ15
SYSTEM BOARD REMOVAL
1. Disconnect the DC-IN harness from PJ8800 on the system board and remove it.2. Disconnect the sound cable from PJ119 on the system board.3. Disconnect the battery harness from PJ8820 and PJ8821 on the system board.
DC-INharness
PJ8800
Battery harness
PJ8820
PJ8821
Sound cable
PJ119
M2.5x4 flat head black screw
TOUCHPAD BOARD REMOVAL
1. Disconnect the touchpad cable from the touchpad PCB.2. Remove four M2x4 brass screws securing the touchpad assembly.3. Lift out the touchpad PCB.
M2x4brass screws
TouchpadPCB
Touchpad cable
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series
TOSHIBATough Enough for Today’s World
3. Remove two M2x4 brass screws securing the CD control/ touchpad button assembly. 4. Lift out the CD control/touchpad button assembly. 5. Lift out the sub LCD assembly.
SENSOR SWITCH REMOVAL
1. Remove four M2x4 brass screws securing the sensor switch assembly.2. Lift out the sensor switch assembly.
M2x4 brass screws
Sensorswitchassy
SatelliteTM
M2x4 brassscrews
CD control/touchpad button assy Sub LCD assy
CD CONTROL/SUB LCD REMOVAL
1. Remove three M2x4 brass screws securing the button holder.2. Lift out the button holder.
M2x4 brass screws
Buttonholder
SPEAKERS REMOVAL
1. Peel off the glass tapes and mylar tapes securing the left and right speaker cables. 2. Remove two M2x6 brass screws securing the left and right speakers.
3. Remove the left and right speaker covers and lift out the speakers.
Mylartapes
Glasstapes
Left and Right speaker coversLeft and Right speakersM2x6 brass screws
FIELD REPLACEABLE UNIT DOCUMENTATION
5100 Series Satellite
TM
TOSHIBATough Enough for Today’s World
FL INVERTER AND 15” LCD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION Satellite
TM
5100 Series
TOSHIBATough Enough for Today’s World
15” DISPLAY MASK REMOVAL
1. Remove two mask seals at the bottom corners of the display assembly using a pair of fine-tipped tweezers.2. Remove two M2.5x6 flat head brack screws securing the display mask.3. There are 22 latches securing the display mask. Carefully insert your fingers between the mask and the LCD panel and pry open the latches starting from the bottom six latches, to the five latches on the right and left sides, ending with the six toplatches.
Latch
Mask seals
Displaymask
LCD
LCD module
M2x5 silver screw FL inverter board
M2x5brassscrews
M2x5 brassscrews
Maskseals
Maskseals
LCD/FL cable
FL cable
1. Remove one M2x5 silver screw securing the FL inverter board.2. Carefully lift up the FL inverter board and disconnect the LCD/FL cable from CN1 and the FL cable from CN2.3. Remove four mask seals to expose four screws securing the LCD module assembly.4. Remove four M2X5 silver screws securing the LCD module.5. Carefully rotate out the top of the LCD module enough to access the display cable6. Peel off the tape securing the LCD/FL cable and disconnect the cable.