TP Series

TP-XXX-10 http://www.vptpower.com

Sales Information: Phone: (425) 353-3010

Fax: (425) 353-4030 E-mail: vptsales@vptpower.com

1

ACCESSORY THERMAL PADS

DESCRIPTION

The TP series of accessory thermal pads provide an

effective method of ensuring a low thermal resistance path, good thermal performance, and excellent isolation between the DC-DC converter and the mounting plane. They are intended to fill air gaps between DC-DC converters and printed circuit boards, heat sinks, or chassis without the use of thermal greases in order to improve heat conduction. The thermal pads have good thermal conductivity and extremely high conformability. They consist of an extremely soft silicone elastomer loaded with aluminum oxide particles, laminated to a thin thermally conductive

reinforcing material which resists puncture and eases handling. They are non-toxic, do not require grease and do not exhibit the cracking problems of ceramic materials. The pads may temporarily react to some cleaning agents by swelling, but are not damaged after the solvent is removed.

FEATURES

• Thermal Conductivity: 2.6 W/m-K

• Breakdown Voltage: >5 kV

• Temperature Rating: -60°C to 200°C

• Color: Gold

• Specific Gravity: 3.2 g/cc

• Heat Capacity: 1 J/g-K

• Hardness (Shore Type 00): 80

• Dielectric Constant: 7.0

• Volume Resistivity: 1010 Ω-m

TP Series

TP-XXX-10 2

CROSS REFERENCE

THERMAL PAD

DC-DC CONVERTER SERIES THERMAL

RESISTANCE FIGURE

TP-001 DVFL2800S, DVFL2800D 0.07°C/W 1

TP-002 DVHF2800S, DVHF2800D 0.16°C/W 2

TP-003 DVTR2800S, DVTR2800D, DVHV2800S, DVHV2800D, DVEHF2800T,

DVHE2800S 0.11°C/W 3

TP-004 DVTR2800T, DVETR2800S, DVETR2800D, DVWR2800T 0.11°C/W 4

TP-005 DVSA2800S, DVSA2800D 0.27°C/W 5

TP-006 DV200-2800S, DV200-2800D, DV200-27000S, DV200-27000D 0.06°C/W 6

TP-007 DVHF+2800T, DVSB2800D, DVGF+2800T 0.16°C/W 7

TP-008 VPT5-2800S, VPT5-2800D, VPTF1-28, VHR5-2800S, VHR5-2800D, VHRF1-28

0.25°C/W 8

TP-009 VPT15-2800S, VPT15-2800D, VPTF3-28, VHR15-2800S, VHR15-2800D,

VHRF3-28 0.17°C/W 9

TP-010 VPT30-2800S, VPT30-2800D, VPT30-2800T, VPTF10-28, VHR30-2800S, VHR30-2800D, VHR30-2800T, VHRF10-28

0.13°C/W 10

TP-011 VPT100-2800S, VPT100+2800D, VPT100+2800S, VPTF20-28, VPTPCM, VPTHVM, VPTi10, VPTc10, VHR100-2800S, VHR100+2800D,

VHR100+2800S, VHRF20-28

0.08°C/W 11

TP-012 VXR7-2800S, VXR7-2800D, VXRF2-28 0.25°C/W 12

TP-013 VXR15-2800S, VXR15-2800D, VXRF5-28 0.19°C/W 13

TP-014 VXR15-2800SM, VXR15-2800DM, VXRF5-28M 0.19°C/W 14

TP-015 VXR30-2800S, VXR30-2800D, VXRF10-28 0.17°C/W 15

TP-016 VXR100-2800S, VXRF20-28 0.08°C/W 16

TP-017 VPT250-2800S, VXR250-2800S 0.05°C/W 17

TP-018 VXR100-2800D 0.07°C/W 18

TP Series

TP-XXX-10 3

DIMENSIONS (TP-001)

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole

locations, and ± 0.040” for all other unspecified dimension tolerances.

Figure 1 – Dimensions (TP-001)

TP Series

TP-XXX-10 4

DIMENSIONS (TP-002)

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole

locations, and ± 0.040” for all other unspecified dimension tolerances.

Figure 2 – Dimensions (TP-002)

TP Series

TP-XXX-10 5

DIMENSIONS (TP-003)

Note: 1. Dimensions are in inches.

2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole

locations, and ± 0.040” for all other unspecified dimension tolerances.

Figure 3 – Dimensions (TP-003)

TP Series

TP-XXX-10 6

DIMENSIONS (TP-004)

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole

locations, and ± 0.040” for all other unspecified dimension tolerances.

Figure 4 – Dimensions (TP-004)

TP Series

TP-XXX-10 7

DIMENSIONS (TP-005)

Note: 1. Dimensions are in inches.

2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole

locations, and ± 0.040” for all other unspecified dimension tolerances.

Figure 5 – Dimensions (TP-005)

TP Series

TP-XXX-10 8

DIMENSIONS (TP-006)

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole

locations, and ± 0.040” for all other unspecified dimension tolerances.

Figure 6 – Dimensions (TP-006)

TP Series

TP-XXX-10 9

DIMENSIONS (TP-007)

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.020” for hole diameters, ± 0.005” for hole

locations, and ± 0.040” for all other unspecified dimension tolerances.

Figure 7 – Dimensions (TP-007)

TP Series

TP-XXX-10 10

DIMENSIONS (TP-008)

.060

0

.10

3

.90

0

1.0

03

0.035.200

.335

.700

.988

.118

0

.035

.435

.800

.222

.422 .472

.222

.672

.872

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 8 – Dimensions (TP-008)

TP Series

TP-XXX-10 11

DIMENSIONS (TP-009)

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 9 – Dimensions (TP-009)

TP Series

TP-XXX-10 12

DIMENSIONS (TP-010)

2X .125 6X .060 R.030 TYP

0

.1

15

.0

50

1.6

00

1.6

50

1.7

65

0

.185

.100

.200

.250

.400

.500

.600

.750

.975

1.135

0

.025

.200 .300

.400 .500

.650 .700

.800

.850

.950

1.000

Note: 1. Dimensions are in inches.

2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 10 – Dimensions (TP-010)

TP Series

TP-XXX-10 13

DIMENSIONS (TP-011)

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 11 – Dimensions (TP-011)

TP Series

TP-XXX-10 14

DIMENSIONS (TP-012)

R.030 TYP.

4X .060

0

.050

.250

.550

.200

.450

.650

.750 .800

.948

.148

0

.9

00

.9

98

.0

98

Note: 1. Dimensions are in inches.

2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 12 – Dimensions (TP-012)

TP Series

TP-XXX-10 15

DIMENSIONS (TP-013)

.060 TYP

0

.300

.500

.800

.988

.178

0

.1

03

1.2

00

1.3

03

.200

.400

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 13 – Dimensions (TP-013)

TP Series

TP-XXX-10 16

DIMENSIONS (TP-014)

2X .137 .060 TYP.

0

.443

.300

.500

.800

1.243

0

.1

03

1.1

15

.0

85

1.2

00

1.3

03

1.055

.200

.255

.400

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”.

3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 14 – Dimensions (TP-014)

TP Series

TP-XXX-10 17

DIMENSIONS (TP-015)

2X .137 5X .060

R.030 TYP.

0 0

.050

.200

.400

.300

.650

.700

.225

.398

.898

.200

.150

.100

.150

.500

.725 0

.1

23

.0

50

1.4

00

1.4

50

1.5

73

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 15 – Dimensions (TP-015)

TP Series

TP-XXX-10 18

DIMENSIONS (TP-016)

R.030 TYP 4X .137

0

.1

23

.0

50

2.0

50

2.1

00

2.2

23

0

.200

.373

.150

.300

.350

.450

.650

.800

1.000

1.173

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 16 – Dimensions (TP-016)

TP Series

TP-XXX-10 19

DIMENSIONS (TP-017)

4X .137

0

.228

2.000

2.228

0

.2

18

1.9

00

2.1

18

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 17 – Dimensions (TP-017)

TP Series

TP-XXX-10 20

DIMENSIONS (TP-018)

.060 4X .137

R.030 TYP.

0

.0

50

.1

23

2.1

50

2.2

00

2.3

23

0

.250

.423

.200

.100

.400

.600

.700

.800

1.050

1.223

Note: 1. Dimensions are in inches. 2. Thickness is 0.020” ± 0.002”. 3. Dimensional tolerances: ± 0.010” for hole diameters, ± 0.005” for hole

locations, and ± 0.010” for all other unspecified dimension tolerances.

Figure 18 – Dimensions (TP-018)

TP Series

TP-XXX-10 21

ORDERING INFORMATION

TP - 001

1 2

(1) (2)

Product Series Thermal Pad

Configuration

TP

001 002

003 004 005 006 007 008

009 010 011 012 013 014

015 016 017 018

Please contact your sales representative or the VPT Inc. Sales Department for more information concerning additional configurations for other applications.

CONTACT INFORMATION

To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales Department at:

Phone: (425) 353-3010

Fax: (425) 353-4030 E-mail: vptsales@vptpower.com

All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors

or omissions. The products or specifications contained herein are subject to change without notice.