track systems - sla.net.ausla.net.au/slastores/_images/catalogues/track cataloguefinallr.pdf ·...

TRACK SYSTEMSEdition 1

Lytespan 3 – Page 6 Lytebeam – Page 10 Lytespan 1 – Page 16 Suspension – 6Lytespan LP – Page 22

Lytespan 3 6 Lytebeam 10 Lytespan 1 16 Lytespan LP 22 Suspension 26

Track Systems

Three CirCuiT | TrACK SYSTeMS

ConCord LYTeSpAn 3 TrACK (LS3)

¨ Polarised 16amp three circuit track system with a common neutral

¨ Suitable for use with Concord and other European three circuit adaptors

¨ Each of the three circuits can be independently dimmed

¨ Unique Lytespan 3 venturi trunk profile in standard or recessed form

¨ Lytesbeam 3 deep trunk profile with empty back channel for cable way or Slimlite module

¨ Couplers and feeds are pre-wired and polarised for ease of installation. See pages 6-7 for planning aid

¨ Broad range of universal suspensions ¨ Polarised and fully earthed

to latest international standards ¨ When dimming, other circuits cannot contain

non-dimmable luminaires such as metal halide

Where National wiring regulations allow.

1.5mm2 MIN.

L1L2L3NN

1.5mm2 MIN.

16APL1

230V = 3680W MAX.240V = 3840W MAX.

L1L2L3N

PL1PL2PL3

N

16A

16A

16A

400V = 3 x 3680W = 11040W MAX.415V = 3 x 3840W = 11520W MAX.


1.5mm2 MIN.

L1L2L3NN

1.5mm2 MIN.

16APL1

230V = 3680W MAX.240V = 3840W MAX.

L1L2L3N

PL1PL2PL3

N

16A

16A

16A

400V = 3 x 3680W = 11040W MAX.415V = 3 x 3840W = 11520W MAX.

All three circuit tracks are designed so that each circuit shares a common neutral. ie. L1+N, L2+N, L3+N.

Please note:

1. Metal halide products are currently unsuitable for dimming.

2. If a common neutral is shared by other sources which are being dimmed, damage may occur to electronic ballasts.

LED, Compact Fluorescent or Halogen cannot be mixed on the same three circuit track if dimming the LED, Compact Fluorescent or Halogen.

6 TRACK

¨ Unique Venturi trunk profile to track and components

¨ Ideal for suspension or surface mounting

¨ Recessed track for suspended ceilings (straight runs only)

¨ Track units and system components enable a scheme to be created to individual requirements

¨ Broad selection of universal suspensions

Straight RunsBendsGridsRecessed

Lytespan 3Three Circuit Track System

L CouplerinSide

T CouplerLeFT

Push-up FeedLeFT

Plug-in live EnduniVerSAL Polarity tab indicates correct way to wire

L CouplerouTSide

T CouplerriGhT

X CoupleruniVerSAL

Push-up FeedriGhT

pLAnninG FroM AboVe When uSinG LYTeSpAn 3 or LYTebeAM

End Cap

L Coupler

ouTSide

X Coupler

uniVerSAL

Live End

uniVerSAL

T Coupler

LeFT

L Coupler

inSide

L Coupler

inSide

T Coupler

riGhT

L Coupler

inSide

There can be no closed rings in the wiring.

polarisation Channel

7 TRACK

1

1

2

3

45

6

7

8

9

10

11

12

13

3

2

This schematic drawing shows only some of the components available with Lytespan 3 and is not meant to infer any particular arrangement or structural installation. Instructions provided with each component must be followed carefully.

1 End cap2 Push-up live feed3 Flexible coupler4 Straight plug-in connector5 Pivoting twin wire suspension (mechanical only) 6 X coupler7 Mounting clip8 T coupler9 Plug-in live end feed10 Track unit11 Rod suspension (mechanical/electrical) 12 Single wire suspension13 Plug–in live feed

reCeSSed LYTeSpAn 3For straight runs only1 End cap2 Push up live feed3 Suspension bracket4 Straight plug in connector

8 TRACK

Lytespan 3Lytespan 3 Three Circuit Track – Mono points

1. STAndArd TrACK

LenGTh WhiTe SiLVer bLACK WeiGhT

1m 2020760 2020761 2025500 0.90kg2m 2020762 2020763 2025501 1.80kg3m 2020751 2020759 2025502 2.70kg4m 2020787 2020788 2025503 3.60kg

1. reCeSSed TrACK uniT

LenGTh WhiTe WeiGhT

2m 2020718 1.95kg3m 2020719 2.85kg4m 2020720 3.75kg

noTe: Compatible track components indicated opposite with red asterisk (*)

1. Mono poinT

LS3 WhiTe SiLVer bLACK

3020010 3020030 3020080

basic components required for a track scheme:

1. Track Unit

2. Live Feed: Feeds power onto track

3. Coupler : Only required if creating runs

4. End Cap: Safely terminates track ends

6 Suspensions: Safely and securely mounts track Optional Accessories

a (cm)

a x b =15 max.

b (kg)max.5 kg

146mm

33mm

Standard recessed

37mm

45mm 43mm

58mm

45mm45mm

9 TRACK

Straight Plug-in Coupler

End Cap

Display Hook

85mm

L Coupler

X Coupler

130mm

Flexible Coupler

85mm

140mm

T Coupler

Lytespan 3Lytespan 3 Three Circuit & DALI Track System – Components

88mm

Plug-in Live Feed

4. end CAp

WhiTe SiLVer bLACK

End Cap* Must be used to safely terminate track ends 2020789 2021317 2025517

5. ACCeSSorY

WhiTe SiLVer bLACK

Display Hook* Suspends signs, cords etc. Max load 5.00kg 2025697 - -

6. uniVerSAL SuSpenSionS

See page 26-27

3. CoupLerS

WhiTe SiLVer bLACK

Straight Plug-In Coupler^ Mech/Elec 2020797 2027542 2025508L Coupler* Inside 2020792 2021315 2025511 Outside 2020793 2021314 2025512T Coupler* Left 2020795 2021313 2025514 Right 2020796 2021312 2025513X Coupler* Universal 2020794 2021311 2025515Flexible Coupler* Mech/Elec 2020798 2021310 2025516

^Wires can be removed to create mechanical only connections. Once wires are removed couplers can be used to feed power on/off of track

Plug-in Live Feed

2. LiVe FeedS

WhiTe SiLVer bLACK

Push-Up Live Feed* Right 2027549 2027547 2027551Push-Up Live Feed* Left 2027546 2027550 2027548Plug-In Live Feed Universal 2020790 2021318 2025507

2. dALi LiVe FeedS

WhiTe SiLVer bLACK

Push-Up Live Feed* Right 2051485 2051486 2051487Push-Up Live Feed* Left 2051488 2051489 2051490

3. dALi CoupLerS

WhiTe SiLVer bLACK

Straight Plug-In Coupler^ Mech/Elec 2020797 2027542 2025508L Coupler* Inside 2051497 2501498 2051499 Outside 2051500 2501501 2051502T Coupler* Left 2051494 2051495 2051496 Right 2051491 2051492 2051493X Coupler* Universal 2051503 2051504 2051505Flexible Coupler* Mech/Elec 2051506 2051507 2051508

^Wires can be removed to create mechanical only connections. Once wires are removed couplers can be used to feed power on/off of track

LYTebeAMTrack System

ConCord LYTebeAM TrACK (LS3)

¨ Polarised 16amp three circuit track system with a common neutral

¨ Suitable for use with Concord (LS3) and other European three circuit adaptors

¨ Each of the three circuits can be independently dimmed

¨ Lytebeam deep trunk profile with empty back channel for cable way or Slimlite module

¨ Couplers and feeds are pre-wired and polarised for ease of installation. See pages 6-7 for planning aid

¨ Broad range of universal suspensions ¨ Polarised and fully earthed

to latest international standards ¨ When dimming, other circuits cannot contain

non-dimmable luminaires such as metal halide


1.5mm2 MIN.

L1L2L3NN

1.5mm2 MIN.

16APL1

230V = 3680W MAX.240V = 3840W MAX.

L1L2L3N

PL1PL2PL3

N

16A

16A

16A

400V = 3 x 3680W = 11040W MAX.415V = 3 x 3840W = 11520W MAX.


1.5mm2 MIN.

L1L2L3NN

1.5mm2 MIN.

16APL1

230V = 3680W MAX.240V = 3840W MAX.

L1L2L3N

PL1PL2PL3

N

16A

16A

16A

400V = 3 x 3680W = 11040W MAX.415V = 3 x 3840W = 11520W MAX.

All three circuit tracks are designed so that each circuit shares a common neutral. ie. L1+N, L2+N, L3+N.

Please note:



LED, Compact Fluorescent or Halogen cannot be mixed on the same three circuit track if dimming the LED, Compact Fluorescent or Halogen.

integrated 3 curcuit with empty back channel for cable way

integrated 3 curcuit downward facing track plus LS3 module for upward facing track

integrated 3 curcuit downward facing track plus Slimlite modules for upward indirect ambient light

¨ Architectural three circuit deep beam section

¨ Indirect ambient lighting using T5 batten accessory

¨ Indirect accent lighting using LS3 track assembly

¨ Wide selection of suspension options, wires, rods and wall brackets

¨ Rigid section provides maximum suspension spacing of up to 4m

¨ Rear beam section may be used to carry other electrical services

¨ Wall brackets allow for wall to wall installation, maximum spacing 4m (longer with suspensions)

¨ Straight Runs

¨ Grids

¨ Bends

LytebeamLytebeam Three Circuit Direct / Indirect Track or Fluorscent System

1. End Cap2. ‘L’ Outside3. ‘X’4. ‘T’ Right5. Inline Straight Connector6. Single Wire Suspension 7. Wall Mounting Bracket8. Mechanical/Electrical Single Wire Suspension 9. Push-up Live Feed10. Twin Wire Suspension11. Suspension Beam End

19

5

3

6

2

11

4

78

10

See pages 15 & 26-27 for accessories

TRACK 13

14 TRACK

LytebeamLytebeam Three Circuit Direct / Indirect Track or Fluorescent System

162

215 215 215

410

410 410

8304m

4m

2m

3m

410

53 53 162

Lytebeam Indirect L3 Modules – suggested spacings

200

304

407 407

20 304

20

4m

3m

2m

20 200

Lytebeam Indirect T5 Modules – suggested spacings

1m L3 + 1 x LH Live End + RH Live end

1. STAndArd LYTebeAM uniT

LenGTh WhiTe SiLVer WeiGhT

2m 2037837 2037841 5.00kg3m 2037838 2037842 7.50kg4m 2037840 2037843 10.00kg

1A. indireCT L3 TrACK ModuLe

LenGTh SiLVer

1.180m 2037845

42mm

94mm

DLOR = 0.62

1b. indireCT T5 bATTen ModuLe

LenGTh LAMp

1.186m 28W T5 9137867

T5 Luxline Fhe T16 G5

28W = 2640 lm

T5 Luxline Fho T16 G5

54W = 4450 lm

Polarisation channel – see page 6 for polarity planing

15 TRACK

LytebeamLytebeam Three Circuit and Indirect Track – Components

4242

I – Straight Coupler

L – Coupler Inside/outside (converts)

T – Left Hand and Right Hand

X – Universal

105mm

Flexible Coupler – Universal

LYTebeAM Three CirCuiT direCT / indireCT TrACK SYSTeM – CoMponenTS

2. LiVe FeedS

WhiTe SiLVer

Push-Up Live Feed Left 2027546 2027547Push-Up Live Feed Right 2027549 2027550

End Cap Beam Cap

4. end CAp

WhiTe SiLVer

End Cap Must be used to safely terminate track ends when using wall mounting bracket – see page 27 2037848 2037850Beam Cap Must be used to safely terminate track ends & provides suspension points 2037851 2037852

Display Hook

5. ACCeSSorY

WhiTe SiLVer

Display Hook Suspends signs, cords etc. Max load 5.00kg 2025697 -

3. CoupLerS

For polarity planning purposes see Lytespan 3 page 6 WhiTe SiLVer

I Straight Coupler Connects tracks to create straight runs Mech/Elec 2037853 2037858L Coupler Polarised couplers supplied pre-wired for ease of installation* Inside/Outside 2037854 2037860T Coupler Polarised couplers supplied pre-wired for ease of installation* Left 2037855 2037861 Right 2037856 2037862X Coupler Polarised couplers supplied pre-wired for ease of installation* Universal 2037857 2037863Flexible Coupler Closes to a minimum of 60º horizontally Mech/Elec 2037864 2037865

*Wires can be removed to create mechanical only connections. Once wires are removed couplers can be used to feed power on/off of track


1. Track Unit

1a. Indirect L3 track module

1b. Indirect T5 batten module


3. Coupler : Only required if creating runs


5. Suspensions – See pages 26-27

6. Optional Accessories

Plug-in Live Feed

6. SuSpenSion

See page 26-27

2. dALi LiVe FeedS

WhiTe SiLVer

Push-Up Live Feed Left 2051488 2051489Push-Up Live Feed Right 2051485 2051486

3. dALi CoupLerS

For polarity planning purposes see Lytespan 3 page 6 WhiTe SiLVer

I Straight Coupler Connects tracks to create straight runs Mech/Elec 2051521 2051522L Coupler Polarised couplers supplied pre-wired for ease of installation* Inside/Outside 2051527 2051528T Coupler Polarised couplers supplied pre-wired for ease of installation* Left 2051524 2051525X Coupler Polarised couplers supplied pre-wired for ease of installation* Universal 2051530 2051531Flexible Coupler Closes to a minimum of 60º horizontally Mech/Elec 2051533 2051534

*Wires can be removed to create mechanical only connections. Once wires are removed couplers can be used to feed power on/off of track

LYTeSpAn 1

Construction: Extruded aluminium profile. PVC liner housing 2 copper

conductorsTotal Max Load: 240 VAC supply 3840w Single fuse rated at 16amps Supply cable 3 x 1.5mm2Finish: Smooth polyester powder paint

finish, Concord white, silver or black

¨ Polarised 16amp single circuit track system with two conductors

¨ Suitable for use with Concord single circuit adaptor types

¨ Choice of formats including low profile ¨ Universal feeds and couplers with polarisation

determined during installation with polarisation tab ¨ Unique Push-up feed allows power to be fed

on or off anywhere along the length of track ¨ Can be cut on site ¨ Broad range of universal suspensions ¨ Polarised and fully earthed to latest

international standards

Single Circuit Track System

Please note:



¨ Trunk profile ideal for suspension or surface mount ¨ Recessed track for suspended ceilings (straight runs only) ¨ Track units and system components enable

a scheme to be created to individual requirements

¨ Broad selection of universal suspensions ¨ Couplers and other components designed

to follow profile of track ¨ Straight Runs ¨ Bends ¨ Grids ¨ Recessed

recessed track1. Recessed suspension bracket2. Push-up live feed3. Recessed track unit4. End cap

Surface track1. Plug-in live feed2. Track unit3. T coupler4. Track unit5. End cap6. Rod suspension (Mechanical only)7. X coupler8. Push-up live feed9. Single wire suspension (Mechanical/electrical)10. Mounting clip11. Flexible coupler12. Straight plug in connector13. Push-up live feed14. Pivoting twin wire suspension (Mechanical only)15. Single wire suspension16. L coupler

Lytespan 1Single Circuit Track Systems

1

1

2

3

4

2

3

14

16 15

13

1

4

4

11

5

7

9

8

10

10

10

6

This schematic drawing shows only some of the components available with Lytespan 1 and is not meant to infer any particular arrangement or structural installation. Instructions provided with each component must be followed carefully.

20 TRACK

reCeSSed TrACK uniT

¨ For single or continuous straight runs

¨ Ideal for suspended ceilings

¨ Order components and accessories separately

1. STAndArd TrACK uniT

LenGTh WhiTe bLACK WeiGhT

1m 2036015 2036018 0.52kg2m 2036016 2036020 1.04kg3m 2036017 2036021 1.56kg

1. reCeSSed TrACK uniT

LenGTh WhiTe WeiGhT

1m 2036022 0.67kg2m 2036023 1.19kg3m 2036024 1.71kg

noTe: Compatible track components indicated opposite with red asterisk (*)

Lytespan 1Lytespan 1 Single Circuit Track System – Track Kits


1. Track Unit


3. Coupler : Only required if creating straight runs


5. Accessories

6. Suspensions: Options see pages

100mm

22mm

6mm

20mm

30mm

Standard

6mm

22.5mm

30mm

35mm

48mm

recessed

1. Mono poinT

LS1 WhiTe SiLVer

3020060 3020070

21 TRACK

End Cap

Display Hook

X Coupler Flexible Coupler

105mm

L Coupler

85mm

T Coupler

85mm

140mm

2. LiVe FeedS

ModeL WhiTe bLACK

Push-Up Live Feed* Feeds power on or off anywhere along the track Universal 2011305 2011833 Plug-In Live Feed* Feeds power on or off at end of track Universal 2011348 2011285

3. CoupLerS

ModeL WhiTe bLACK

Straight Plug-in Couple* Connects tracks mech/elec to create straight runs Mech/Elec 2011303 2011835 L Coupler Couplers supplied with wires.# Polarisation determined on site Mech/Elec 2011379 2011297 T Coupler Couplers supplied with wires.# Polarisation determined on site Mech/Elec 2011381 2011299 X Coupler Couplers supplied with wires.# Polarisation determined on site Mech/Elec 2011383 2011301 Flexible Coupler Closes to minimum of 60º horizontally Mech/Elec 2036027 2036028 All couplers can easily be converted to mechanical only couplers.#Can be used to feed power on/off of track once internal linking wires are removed

4. end CApS

ModeL WhiTe bLACK

Must be used to safely terminate track ends* 2011345 2011283

5. SuSpenSion ACCeSSorieS

ModeL WhiTe bLACK

Display Hook* Suspend signs, cords etc. Max load 5.0kg 2007631 -Fluorescent Adaptor Kit* For mounting and connecting surface fluorescents onto track Max 4 amps 2011350 -

Lytespan 1Single Circuit Track System - Components

Push-up Live Feed

Plug-in Live Feed

55mm

Fluorescent Adaptor Kit

LYTeSpAn Lp (LoW proFiLe)

Construction: Extruded aluminium profile. PVC liner housing 2 copper

conductorsTotal Max Load: 240 VAC supply 3840w Single fuse rated at 16amps Supply cable 3 x 1.5mm2Finish: Smooth polyester powder paint

finish, Concord white, silver or black

¨ Polarised 16amp single circuit track system with two conductors

¨ Suitable for use with Concord single circuit adaptor types

¨ Choice of formats including low profile ¨ Universal feeds and couplers with polarisation

determined during installation with polarisation tab ¨ Unique Push-up feed allows power to be fed

on or off anywhere along the length of track ¨ Can be cut on site ¨ Broad range of universal suspensions ¨ Polarised and fully earthed to latest

international standards

Track System

Please note:

1. Metal halide products are unsuitable for dimming.


24 TRACK

LenGTh WeiGhT WhiTe SiLVer

1m 0.60kg 2019502 20257092m 1.20kg 2019503 20257103m 1.80kg 2019504 2025711

LenGTh WeiGhT WhiTe SiLVer

2m 1.20kg 2019505 20257123m 1.80kg 2019506 2025713

Starter Track

¨ Ideal for surface mounted runs ¨ Single length or to start a run. ¨ Supplied with Track Unit, Push-up Live Feed, End Caps and Mounting Screws

and Screw Cap Covers

Joiner Track

¨ Ideal for surface mounted runs ¨ Extends Starter Track to create straight runs. ¨ Supplied with Track Unit, Plug-in Live Coupler and Screws and Screw Cap Covers

45mm

16mm

Lytespan LpSingle Circuit Track System - Components

CoupLerS

ModeL WhiTe SiLVer

Flexible Coupler Closes to a minimum of 45º horizontally Mech/Elec 2025994 2025995 Can easily be converted to mechanical only

ACCeSSorieS

ModeL WhiTe

Display Hook Suspends signs, cords etc Max load 5.00kg 2007631

Display Hook

Flexible Coupler

85mm

25 TRACK

¨ Slim, broad based, low profile for surface mounting, onto walls, ceilings or floors

¨ Track kits consisting of starter or joiner tracks with all the components needed for single or continuous straight runs

¨ Flexible coupler for bends

¨ Supplied with screws for surface mounting. Option of concealed method or through fixing using caps and covers supplied

¨ Couplers and end caps follow elegant profile of track

¨ Straight Runs

¨ Bends

1. Starter track2. Plug-in coupler3. Joiner track4. Push-up live feed 5. End cap6. Flexible Coupler7. Screw cap and cover for

through fixing

This schematic drawing shows only some of the components available with Lytespan LP and is not meant to infer any particular arrangement or structural installation. Instructions provided with each component must be followed carefully.

Lytespan LpSingle Circuit Track System

Concealed Fixing Starter track ¨ (Single run only) Fixing screw supplied

¨ Slide PVC Conductor Strip from aluminium extrusion

¨ Slotted screw keyholes are revealed

¨ The extrusion can be used as a template

¨ Screws can be installed at the predetermined centres

¨ The track can then be offered up and the screws tightened

¨ PVC conductor strip can then be returned to the extrusion

Through Fixing Starter and Joiner track

¨ (Continuous runs) Fixing screws and screw caps supplied

¨ Screw caps push into the track at determined distances

¨ Screw caps can be used as a drilling guide

¨ When track section is firmly fixed, screw cap covers are pushed on to conceal the screw heads

¨ Safety Screw caps must be used

CeiLinG And WALL MounTed onLY. CAn’T be uSed WiTh SuSpenSion WireS or rodS

6

1

5

23

4

7

26 TRACK

Single Wire Suspension(Mech only)

Twin Wire Suspension(Mech only)

Single Wire Suspension(Mech only)

Twin Wire Suspension(Mech only)

SuspensionSingle and Three Circuit Track Systems

Wire SuspensionChrome

Rod SuspensionWhite

Single / Three Circut White

¨ Rod and Floating suspensions provide rigid fixing up to 1m straight down from ceiling. Required for uneven loads or areas exposed to air movement

¨ Adjustable 3m wire suspensions provide the flexibility to fix from any angle, ideal for sloping ceilings

¨ Longer lengths available as variants

¨ Clutch adjustment mechanism allows quick and easy installation and levelling. Excess wire can safely be removed

¨ Twin pivoting suspensions ideal for grids and corners

¨ Easy to wire mechanical and electrical rod and wire suspensions enable discrete mains supply

¨ Wall mounting brackets for wall to wall installations (Lytebeam only)

order CodeS LenGTh* MAX LoAd ChroMe WhiTe WhiTe WhiTe

Wire Suspensions - Length easily adjusted

Single Wire Suspension Length easily adjusted 3m 20kg - - 2035014 2035015Single Wire Suspension Length easily adjusted 6m 40kg 1035031 - - -

rod Suspensions

Rod Suspension Can be cut on site at ceiling mounting end only. +/- 5mm levelling adjustment 0.5m - 2035020 2035021 2035022 1.0m 25kg - 2035023 2035024 2035025

Rod Extension Screws onto Mechanical only rod suspensions. Can not be cut on site. Max drop 3m. +/- 5mm levelling adjustment 0.5m 25kg - 2035026 - -

Floating Suspension +/- 5mm levelling adjustment 0.07m 25kg - 2035027 - -

MeCh onLY MeCh onLYSinGLe Cir.eLeC/MeC

Three Cir.eLeC/MeC

uniVerSAL SuSpenSionS

LenGTh* MAX LoAd WhiTe bLACK STeeL

recessed Mounting - For fixing recessed track into suspended ceilings

Suspension Bracket - 25kg - - 2010997

Surface Mounting - Clip screw onto fixing surface. Track snaps onto back, secured with allen key supplied

Mount Clip 0.14m 15kg 2011999 2011841 -

Wall Mount bracket - For fixing recessed track into suspended ceilings

- 20kg 2037846 2037847

* Length refers to distance from mounting surface to back of track onto back, secured with allen key supplied.

Max spacing for all Single Circuit and Three Circuit Track systems 1.2mMax spacing for Lytebeam 4m

TRACK 27

SuspensionSingle and Three Circuit Track Systems

TrACK deFLeCTion dATAThe data below gives an indication of the max distributed and point loads that can be taken before deflection of track will occur.Do not exceed max load for individual suspensions. Data is for max spacing or 1.2m

1.2Kg

20KgMax

20KgMax

20KgMax

20KgMax

20KgMax

20KgMax

20KgMax

1.2Kg

4M = 10Kg

1.2Kg

1.2Kg 1.2Kg

4M = 10Kg

14.6Kg + (25.4Kg Luminaires) Max = 40Kg

0.5Kg

1.2Kg

1.2Kg 1.2Kg

0.75Kg0.75Kg 0.75Kg

1.2Kg 1.2Kg 1.2Kg

4M = 10Kg4M = 10Kg

1.2Kg

14.6Kg + (25.4Kg Luminaires) Max = 40Kg

29Kg + (31Kg Luminaires) Max = 60Kg

Track deflection data and maximum load Lytebeam Max spacings for all Lytebeam suspensions 4m

Rod Suspension(Mech only)

Rod Suspension(Mech/Elec)

Wall Mounting Bracket(Lytebeam only)

Floating Suspension(Mech only) (Not Lytebeam)

Mount Clip(Not Lytebeam)

TrACK deFLeCTion dATA LiGhTSpAn

deSCripTion diSTribuTed poinT

other track systems - Max spacing is 1.2m

Lytespan 1 7.40kg 4.60kgRecessed Lytespan 1 21.60kg 13.50kgLytespan 3 32.00kg 20.00kgRecessed Lytespan 3 46.00kg 28.50kg

MAXiMuM ALLoWAbLe LoAd

TRACK & ACCESSORY MATRIX

RANGE TRACK UNIT COLOUR PLUG IN LIVE END

PUSH UP LIVE END

END CAP STRAIGHT COUPLER

“L” COUPLER “T” COUPLER “X” COUPLER FLEXIBLE COUPLER

MOUNTING CUP

ROD SUSPENSION

MECHANICAL

ROD SUSPENSIONMECH/ELECT

ROD SUSPENSION EXTENSION

WIRE SUSPENSION

MECHANICAL

WIRE SUSPENSION TWIN WIRE

WIRE SUSPENSION MECH/ELECT

RECESSED SUSPENSION

BRACKET

CATALOGUE REFERENCE

PAGE

LYTESPAN 1

1M 2036015 2M 2036016 3M 2036017

WHITE 2011348 2011305 2011345 2011303 2011379 2011381 2011383 2036027 2011999.07M 2035027 .5M 2035020 1M 2035023

.5M 2035021 1M 2035024

2035026 2035031 2035016 2035014 Pg 16 - 21

1M 2036018 2M 2036020 3M 2036021

BLACK 2011285 2011833 2011283 2011835 2011297 2011299 2011301 2036028 2011841 Pg 16 - 21

LYTESPAN 1 RECESSED

1M 2036022 2M 2036023 3M 2036024

WHITE 2011305 2011345 2011303 2010997 Pg 16 - 21

LYTESPAN 3 STANDARD &

DALI

1M 2020760 2M 2020762 3M 2020751 4M 2020787

WHITE

UNIVERSAL 2020790

DALI 2654588

LEFT 2027546 DALI LEFT 2051488

RIGHT 2027549 DALI RIGHT

2051485

2020789IN 2020797

DALI IN 2020797

IN 2020792 DALI IN 2051497

OUT 2020793 DALI OUT 2051500

L 2020795 DALI L 2051494

R2020796 DALI R 2051491

UNIV 2020794 DALI UNIV. 2051503

2020798 DALI

20515062011999

.07M 2035027

.05M 2035020 1M 2035023

.5M 2035022 1M 2035025

.5M 2035026 2035031 203516 2035015Pg 6 - 9

1M 2020761 2M 2020763 3M 2020759 4M 2020788

SILVER

UNIVERSAL 2021318

DALI 2654590



2051486

2021317IN 2027542

DALI IN 2027542

IN 2021315 DALI IN 2051498

OUT 2021314 DALI OUT 2027542

L 2021313 DALI L 2051495

R 2021312 DALI R 2051492

UNIV 2021311 DALI UNIV. 2051504

2021310 DALI

2051507Pg 6 - 9

1M 2025500 2M 2025501 3M 2025502 4M 2025503

BLACK

UNIVERSAL 2025507

DALI 2654589



2051487

2025517IN 2025508

DALI IN 2025508

IN 2025508 DALI IN 2051499

OUT 2025512 DALI OUT 2051502

L 2025514 DALI L 2051496

R2025513 DALI R 2051505

UNIV 2025515 DALI UNIV. 2051505

2025516 DALI

2051508

2011841Pg 6 - 9

LYTESPAN 3 RECESSED

2M 2020718 3M 2020719 4M 2020720

WHITE2020799



2051485

2020789

IN 2020797 DALI IN 2020797

2010997 Pg 6 - 9

MONOPOINT LS1**

3020060 WHITE Pg 20

3020070 SILVER Pg 20

MONOPOINT LS3***

3020010 WHITE Pg 8

3020030 SILVER Pg 8

3020080 BLACK Pg 8

*End Caps: If using PUSH UP LIVE FEED you need 2 x End Caps - one at each end. **Mono Point LS1 (single unit ceiling/wall mount) LS1 is suitable for both Concord and Lumiance ***Mono Point LS3 (single unit ceiling/wall mount) LS3 is suitable for both Concord and Lumiance

TRACK UNIT COLOURI/D T5

BATTENP/U L/END END CAP BEAM E/C ST - COUP “L” COUP “T” COUP “X” COUP FLEX COUP. MECH. SUSP MECH. ELECT. EXTENSION MECH TWIN WIRE MECH/ELE TWIN M/E

WALL MNT.

CATALOGUE REFERENCE

PAGE

LYTEBEAM

2M 20378373M 20378384M 2037840

WHITE 9137867L 2027546 R 2027549

DALI L 20514882037848

2037851 DALI 2051521

2037853 DALI IN/OUT

2051527

2037854 DALI I LEFT 2051524

L 2037855 R 2037856 DALI UNIV. 2051530

2037857 DALI

2051530

2037864 DALI

2051533

FLOATING .07m 2035027 .5m 2035020 1M 2035023

.5m 2035022 1M 2035025

.5m 20350262035031 CHROME

ONLY

2035031 CHROME

ONLY2035015 2035018

2037846 Pg 10 - 15

2M 20378413M 20378424M 2037840

SILVER 2037845L 2027547 R 2027550

DALI L 20514892037850

2037852 DALI 2051522

2037858 DALI IN/OUT

2051528

2037858 DALI LEFT 2051525

L 2037861 R 2037862 DALI UNIV. 2051531

2037863 DALI

2051531

2037867 DALI

20515342037847 Pg 10 - 15

New South WalesSylvania Lighting Australasia Pty LtdPhone: 02 8873 0000Fax: 02 8873 0001Email: [email protected]

NewcastleStramac Pty LtdPhone: 02 4969 6555Fax: 02 4962 2457Email: [email protected]

QueenslandSylvania Lighting Australasia Pty LtdPhone: 07 3034 8600Fax: 07 3846 3689Email: [email protected]

Northern TerritoryGerard Lighting Group LtdPhone: 08 8941 2225Fax: 08 8941 2223Email: [email protected]

VictoriaSylvania Lighting Australasia Pty LtdPhone: 03 9689 7833Fax: 03 9689 5611Email: [email protected]

TasmaniaSylvania Lighting Australasia Pty LtdPhone: 1300 519 796Fax: 1300 841 796Email: [email protected]

SYLVANIA LIGHTING AUSTRALASIA Australia and New Zealand Customer Service Centres:

South AustraliaSylvania Lighting Australasia Pty LtdPh: 08 8122 2440Fax: 08 8122 2449Email: [email protected]

Western AustraliaSylvania Lighting Australasia Pty LtdPhone: 08 9249 2890Fax: 08 9249 8160Email: [email protected]

New ZealandAesthetics Lighting SolutionsFreecall: +64 (0)508 743 757Fax: +64 (0)508 743 755 Email: [email protected]

Sylvania Lighting Australasia Pty LtdSylvania Way Lisarow NSW 2250 | Locked Bag 9, Gosford NSW 2250

Phone: 1300 728 988 | Fax: 1300 728 844 | Email: [email protected]

www.sla.net.au

ED

01-0

913

Scan the QR code for current product range catalogues.

track systems - sla.net.ausla.net.au/slastores/_images/catalogues/track cataloguefinallr.pdf ·...

Documents