trade fair issue 2017 - gfr · trade fair issue system solutions for building management and...

13
create comfort. control energy. Trade fair issue System solutions for building management and building automation 2017 Solutions for enhanced energy-efficiency and higher comfort in buildings. create comfort. control energy.

Upload: phamdieu

Post on 03-May-2018

217 views

Category:

Documents


3 download

TRANSCRIPT

Page 1: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

create comfort. control energy.

Trade fair issue

System solutions for building management and building automation

2017

Solutions for enhanced energy-efficiency and higher comfort in buildings.

create comfort. control energy.

Page 2: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

1. GFR automates buildings and rooms in accordance with DIN EN 15232 (energy efficiency class A), EN 16484 and VDI 3813. By doing so, the ener-gy-efficiency of buildings can be increased by 30% and more.

2. We have been taking care of saving energy for more than 35 years. Our name is our commitment and our mission is more relevant than ever before.

3. GFR offers building automation solutions from one source. If you coope-rate with GFR, you will only require one point of contact for all questions on planning, implementation, optimisation and support of your subsidiary.

4. GFR manufactures quality products in Germany.

5. GFR has a staff of 260 highly-motivated employees and is a well- positi-oned mid-sized company. Take advantage of our fast decision-making, lean processes and fast response times.

6. GFR has an own production department for control cabinets. Your benefit: 100% quality and maximum flexibility during the construction phase.

7. GFR develops complete system solutions which are upward compatible. Take advantage of our expertise - today and in the future.

8. GFR has access to the engineering tool WEBPROJECT which ensures totally consistent planning, design and documentation.

9. If you decide for an automation systems of the trade mark DIGICON-TROL®, the building management system WEBVISION 5 and our energy data management system WEBENCON you will invest in high-performance, expandable and future-proof building systems which will also fulfil the in-creasing requirements of tomorrow.

10. WEBVISION 5 sets new standards for the performance of buildings. The innovative solutions and services provide an optimum balance between efficiency and comfort.

11. DIGICONTROL® supports you in your efforts to reduce the CO2 emissi-ons tremendously and to run your building more efficiently.

ü

üü

üü

ü

üü

ü

ü

ü

GFR – Gesellschaft für Regelungstechnikund Energieeinsparung mbH

Welcome to GFR! create comfort. control energy.

Welcome to GFR!We look forward to giving you a short insight into highlights, innovations and solutions of our company.

GFR mbH was founded in Verl, Germany, in 1978 and is, particularly with its registered trademarks DIGICONTORL® and DIGIVISION®, one of the lea-ding providers in the building automation branch. We have been a member of the WIEDEMANN group with its headquarters in Sarstedt since 1995.

GFR develops and sells advanced technologies, solutions and products for planning, building and optimising complete building automation systems which consist of energy data management and technical building manage-ment, building and industry automation, room automation and room control-lers. Our cutting-edge products and solutions meet the highest requirements all over the world.

The outstanding feature of GFR building system solutions is the consistency of our products and services. The wide range of our integration solutions enables a holistic consideration of buildings and their energy-efficient ope-ration.

11 good reasons for GFR

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 32

Page 3: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

ROOM4D

DEGREEN

MS/TP

WEBENCON WEBPROJECTWEBVISION 5

iCONTROLcomfort2go

ECONOMIZER Retrofit

IP

DIGICONTROL

WEBVISION 5WEBENCON

/

SaaS Engineering

Mobile

DALI

ems4.ECONO ems4.RF01E .SM04E .SM03Bems4.KM01Eems2.R4D1B .KNX1E.ME01E ems4.DEA1I.KM03E .DALIems4.TLOGems2.CP14D ems4. ...

ems4.EC4-7 R4D.RT7 R4D.RC05 | 06 R4D.RC01 - 04ems4. ... LVBems4.EC4-10.4

ems4. ...E-B

B-AWS

R4D.RTF

European Patent2667278

.DE06E .MP01E .ENO1B

Server Integration Database

HYDROMIZER

ems4.HYDRO

Protocol Rev. 14.0

SAIADIGICONTROL

PCD 1PCD 1.NTPCD 2

PCD 4

BIMBuilding InformationModeling

Energy suppliersSmart grid

Building Automation Integrated Room Automation and Light Management

Building Management and Monitoring

Fire dampersField bus modulesFancoilsAutomation stations

Architects and Planners

Vendor-neutral planning, EN ISO 16484 and VDI 3814

System bus

Energy DataManagement

IT Security NetworkSecurity Operators Constructors

100% Comfort70% Energy savingsAutomation stationMultifunctionSavingAutomation station and

Highlights, Innovations and SolutionsSystem topology - Contents

page 7

page 8, 9

page 10, 11

page 12

page 13

page 14, 15 page 16, 17page 18 page 19

page 19

page 20page 21 page 21 page 21 page 22page 23

page 13

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 54

Page 4: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

Unique solutions for buildings Ready for BIM Building Information Modeling

ENERGY MANAGERSPLANNERS AND ARCHITECTS

SYSTEM PARTNERSOPERATORS

SHOPPING MALLS

OFFICE BUILDINGS

HOSPITALS

HOTELS

EVENT LOCATIONS

EDUCATIONAL INSTITUTIONS

INDUSTRY

SECURITY

Ethernet

READY FOR BIMGENERAL CONTRACTORS AND CONSTRUCTORS

Solutions in all areas,for all stakeholdersOur extensive portfolio aims at investors, planners, architects, general contractors, builders and operators of modern real estates who we provide with innovative solutions and state-of-the-art-products for mo-dern and safe buildings. Furnish your real estate with the necessary intelligence for a significantly higher efficiency.

Take advantage of our unique solutions in all fields, whether in mul-tifunctional arenas, shopping malls, production facilities, hotels, hos-pitals or distributed properties. We are a major player in all building categories and all areas of modern building and room automation.

Architects and planners work with universally configurable objects and standards. Building owners and operators get data from the planners with high information content.General contractors and constructors can access all price-relevant information and data for exe-cution planning at a single glance.

Ready for BIMWEBPROJECT digitalizes all project and product data and provides standardized interfaces for their import and export, also for data from third-party systems, for example FM or Smart Grid and create the foundation for integrating the technical building management into BIM systems.

ü

BIM - Building Information ModelingBIM is an integral method of innovative building planning by means of software. Building data are digitally collected, processed and cross-linked by BIM. Buildings can be designed, modeled, optimized and simulated. This process comprises planning, execution, operation and possible dismantling. Everything is done with just one three-dimensional model which is used by all stakeholders.

Building automation engineering system

Building management

ArchitectsPlanners

Building automation

Room automationEnergy suppliers

Smart GridGeneral contractors

ConstructorsOperators

Energy data management

Building management

Energy data management

BIMBuilding Information Modeling

The Elbphilarmonie, which was inaugurated in January 2017, is one of our many project highlights. See pages 8 and 9 of this brochure for detailed information.

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 76

Page 5: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

Current press release

„Elphi“ - the construction of the century

1. The old quay warehouse with its red tile brick facade forms the foundation of the Elbphilharmonie. The former warehouse for cocoa, tea and tobacco was gutted completely at the beginning of the construction works.

2. The glass facade consists of 1,100 window elements, partially elaborately arced and individually printed with a grid of grey chrome points. The entire facade equals the area of two football pitches.

3. The Tube: The visitors can expect a panorama window with a harbour view at the end of the 82 meter long upwardly curved escalator. Another 20 meter escalator will lead you to the Plaza.

4. The Plaza is a central platform at a height of 37 meters which is freely accessible as a public area. The surrounding walkway around the whole building provides a fantastic view on the port and the city. The total space of the Plaza is 4,000 square metres which is almost as big as the Hamburg Town Hall Square.

5. The Grand Hall is the heart of the Elbphilharmonie: The Grand Hall with its 2,100 seats is built in accordance with the vineyard principle, having a stage in the centre which is surrounded by terrace-shaped seating rows.

6. The sound reflector which hangs from the centre of the tent-shaped arched ceiling provides the excellent acoustics of the hall. Thus, the ascending sound is evenly distributed in the entire room.

7. The four-manual organ with 65 registers and additional registers inside the reflector below the hall’s ceiling completes the Grand Hall.

8. The Small Hall is located at the eastern part of the building and is equipped with a flexible stage technology and provides seating for up to 550 visitors.

9. On one hand, the quay studio in the base construction (150 seats) will be used as a location for experimental music, presentations and workshops; on the other hand it will be the centre of the music-teaching offers which are stretching over two floors of this building. The musical museum which is a very important part of these offers will find a new home here as well.

10. The foyer bar on 15 th floor is the gastronomic centre of the concert area. Other bar zones invite guests to stay during breaks.

11. The hotel on 14 storeys providing 250 rooms, a wellness and conference area is located in the Eastern part of the building.

12. The 45 flats are spacious apartments with glass fronts and balconies which provide spectacular views on Elbe, harbour and city.

13. Parking garage: the seven-storey parking garage in the basement building has parking spaces for more than 500 cars. A spindle leads into the car park which is reached via an access road at the eastern side of the building.

Aerial view of Elbphilarmonie

Great hall

Foyer of the great hall

Plaza

„Magical, spectacular, breath-taking“These were the first words of the visitors after the inauguration of the Elbphilarmonie on the 11th and 12th January, 2017. Those statements focused on the extraordinary architecture of the building, which is located in the estuary of the river Elbe, the unique geometry of the “Great hall“ with the “White Skin“, the spectator terraces which are based on the model of a vineyard and the surface structure of the outer building with its 16,000 square meter glass facade which magically mirrors the light and reflections of the water. The building, which is 110 meters high, combines three concert halls, gastronomy, a hotel, luxury apartments, a parking house and a public plaza with a breath-taking view on the entire Hanse city.

„Exceptional technology“The Elbphilarmonie offers superlatives and impressive technology, even in areas which are not visible to the naked eye. The building and room automation by GFR mbH provides a major contribution to the invisible magic of this unique location. A prime example for this is the indoor climate of the Great Hall which ensures the exceptional acoustics because people feel comfortable and optimum conditions are provided for the instruments.

DIGICONTROL automation systems are applied in all areas of the building and the integrated parking garage. A total of 100 ventilation systems are controlled and regulated. They contain 260 fans, about 1,900 fire dampers and approximately 600 smoke extraction and louvre dampers. GFR technology in terms of DIGICONTROL systems operates the energy centers, 425 single room control units for various fields of application with individual requirements and the cold water generation with the control of the cooling water supply by means of water from the river Elbe and a deep well system.

„The building automation systems arebased on DIGICONTROL and BACnet“Two independent management and operation controls, WEBVISION and the energy data management system WEBENCON, which can be operated from six decentral locations, are used in the technical facility management. 384 BACnet Building Controllers (B-BC) “DIGICONTROL ems2.CP04D“ and three automated optical fibre ring bus systems with 660 subscribers and 77 frequency converters, that communicate via BACnet MS/TP, are integrated into the building network. The communication of the energy consumption is performed via the integrated M-Bus and KNX systems. Different kinds of third-party software, e.g. the hotel management system Fidelio, have been embedded.

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 98

Page 6: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

Building management platform WEBVISION 5

Monitoring with high information content

üüüü

Open interfaces enable the integration of all building trades like alarm systems, fire detection systems, ERP systems, office systems, facility management, hotel management, entertainment systems and indus-trial automation.

Synergies resulting from the integration of all systems of the technical building services can be used for various purposes like:

Overall monitoring of all areas

Enhancement of security

Optimisation of energy-efficiency

Improvement of comfort

WEBPROJECT - WEBVISION 5 - WEBENCON - DIGICONTROL

Holistic engineering allows consistent monitoring

Building management

Hotel management

Industry automation

Entertainment

FireIntruder alarm Access Calendar

Web servicesSystem xyzAutomation

Energy data management

OfficeFacility management ERP

CCTV surveillance

Ethernet / BACnet / IP

Room automation

BIMBuilding Information Modeling

Engineering

Tailor-made user interfaces ■ Individually adjustable navigation views: tiles, lists or project tree.

Present correlations comprehensively ■ Parallel representation of plant structures (Engineering, Accounting, Administration).

Using templates ■ Taking advantage of templates for dynamised plant gra-phics, diagrams, users, ...

Drag and Drop ■ Creation of individual navigation structures. ■ Filing tray for saving frequently used applications.

From the facility manager down to the janitor ■ Flexible and easily configurable authorisation concept. User roles with summarised individual rights.

Tenant-capable ■ Managing several projects of one or different customers on one system where every user (tenant) can only access his data.

As large or as small as you desire ■ Arbitrarily zoomable plant graphics (without additional installations or plug-ins).

■ The visualisation of the symbols and plants is performed in vector format.

Responsive design ■ Automatically scalable and flexible screens on stationary and mobile devices.

Building and energy data clearly displayed at a glance.

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 1110

Page 7: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

Design, function and security in perfect harmonyThe topic security in the building automation sector has enormously increased in importance in recent years. The used technologies in automation and information technology are converging more and more and additional opportunities are created by “Internet of Things“ (IoT) on the one hand but building auto-mation systems are cost-intensive and durable on the other hand.

The vulnerability refers as well to data as to physical technical facilities like ventilation, light, power supply and other essential functions of real estates. The aspects of central control and adequate security of a building have especially become more important in the event of a blackout which is a realistic scenario of military defence.

In contrast to common IT technology, not only data are under serious threat. Due to the connection of the building automation system with the technical property equipment (heating, ventilation, illumination, doors, access control and hazard detection systems), attacks can have security-related implications and cause damage to the building. The real risk of a building lies in the building automation’s depth of impact. The security of network-based building automation takes place on two levels:

■ protection of individual devices, PCs and software and ■ protection of IT infrastructure: networks and their accesses.

The hardware and software of DIGICONTROL automation systems, WEBVISION 5 building management systems and WEBENCON energy data management systems contain access authorisation systems with password protection, encrypted communication, internal firewalls, VPNs, etc. for ensuring maximum pro-tection for devices and the entire building automation IT infrastructure.

B-AWSBACnet Advanced Operator Workstation

Protocol Rev. 14.0

WEBVISION 5

The new building manangement platform for

üüü üü

WEBVISION 5 - My building managementMinimises energy consumption.

Optimises comfort.

Integrates trades.

Makes buildings more secure.

Is certified as BACnet Advanced Operator Workstation (B-AWS). The successful test of the software and the certification of Webvision 5 were performed in compliance with the currently highest conformity standard 14.0. This means that WEBVISION 5 is the sixth product in the world with B-AWS certification according to protocol revision 14.0. In combination with the certified DIGICONTROL ems2 – BACnet Building Controller (B-BC) automation system, Webvision 5 is an effective way to implement energy-efficient and sustainable buildings.

The open system architecture, the use of global standards and uniform interfaces and protocols sup-ports users in their daily work and in the implementation of integration solutions for energy-saving and reliable plant operation with the greatest possible flexibility.

WEBVISION 5 excels through its intuitive operation. In addition, with two- or optionally three-dimensional vector graphics and semantic zoom, users have the best possible tools for clear and well-organized visualization of even highly complex systems across a range of devices.

The WEBVISION 5 concept is designed for both local use (on site) and as a cloud solution.

ü

ü

ü

ü

your buildings and properties

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 1312

Page 8: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

DIGICONTROL ECONOMIZER

Award-winning technology saves a tremen-

The path-breaking and patented process for the energy-optimised control of air conditioning systemsRunning ventilation and air conditioning plants in buildings often involves high operational and energy costs. The expenses are particularly high in air-conditioning plants with the processes heating, cooling, humidifying and dehumidifying. Therefore it pays off having a closer look at building automation systems for the control of air-conditioning plants. Just optimising conventional systems is not sufficient. Innovative technologies have to be applied if you really want to take advantage of saving potentials and increase energy-efficiency.

Successfully proven at the Fraunhofer Institute Dresden

Winner of the TGA AWARD 2016

European patent no. 2667278

üüü

üüüüü

ü

ü

Functional principleThe “DIGICONTROL Economizer“ controls air conditioning plants with energy recovery systems in an optimisation process that is globally unique.

Optimum utilisation of area of optimum comfort

Energy-efficient control of air treatment

Cost-optimised calculation within predefined room set points

Scientifically sound development of control algorithms

Enhanced comfort and efficiency

Smooth Integration ■ into existing DIGICONTROL systems

■ into BACnet systems

Easy installation ■ Snap the ems4.ECONO mo-dule onto the top hat rail and connect it with the automati-on bus

■ Supplement the sensor tech-nology (in existing plants), where applicable

■ Configure the controller soft-ware of the ems4.ECONO module

DIGICONTROL Economizer - module ems4.ECONO

dous amount of 69.5% energy

Optimisation of energy consumption in a full air-conditioning system at the Fraunhofer Institute Dresden

Figure 1 – Consumption, costs and emissions of an air-condi-tioning plant after an operating time of 140 days (17August, 2015 to 03 January, 2016) in alternating operation between “Classic control” and “GFR Eco mode”

Picture credits: fotodesignberlin.de | Award ceremony

(from left to right): Keynote speaker - Prof. Dr.-Ing. Bert Oschatz / ITG Institute for Technical Building Services Dres-den, Olaf Durst / Sales Director GFR Jena, Prof. Dr. Sokollik / Technical University Merseburg

The prize ceremony of the German TGA Award took place in the framework of the “Berlin Energy Days” at the building of the Chamber of Trade and Commerce Berlin on 12 April, 2016.

GFR won the prize in the category “Innova-tive concept in measuring and control tech-nology/building automation“ with the project “Optimisation of energy consumption and emission reduction at the Fraunhofer Institute Dresden“.

The Prize is awarded to specialist planners, engineers, architects and manufacturers, who operate in Germany, for a registered product which is available on the market and that has been applied in a project. HUSS-MEDIEN GmbH is the organiser of this event.

The “DIGICONTROL proportional pressure control“ and the “DIGICONTROL Economi-zer“ have been retrofitted by GFR in an exis-ting air-conditioning plant at the IKTS (Institu-te for Ceramic Technologies and Systems) of the Fraunhofer Institute Dresden.

Impressing savings could be proven after an operating time of 140 days:(see figure 1)

69,5% lower energy consumption

44,8% lower operational costs

31,2% less CO2 emissions

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 1514

Page 9: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

DIGICONTROL HYDROMIZER

Exceptional comfort in heating and cooling

The “Hydraulic Compensation“The hydraulic compensation, if any, is usually performed during full-load operation and by means of an initial setup of the throttling devices in heating and cooling circuits. The partial-load operation is not taken into consideration which results in imbalances when the control valves are partially closed. Systems that have not been hydraulically compensated are often operated with a significantly excessive pump speed for sufficiently supplying the poorly connected consumers. This means: The plants are not operated efficiently, the rooms remain cold or are overheated or the temperature swings up and down.

Figure 3: Example

systems

For technology enthusiasts > How it works:The volumetric flow of each individual valve can be calculated in case of a known actuating value by measuring the pump pressure and the total flow rate via just a single sensor. Furthermore, the mutual in-fluence of the volumetric flows can be eliminated by individual valve operations. The following measuring values are sent to the Hydromizer to ensure its function:

■ The volumetric flow V point of the entire system ■ Differential pressure Δp which is generated by the pump ■ All valve positioning values Yi of the system (originate from the single room control) ■ Layout of piping, only series and parallel connection of radiators here

The hydromizer calculates the KVS values of the valves and the pressure loss coefficients ζ of the piping from the different correlations of the input values. The calculation with the minimisation of pump perfor-mance automatically results into fully opening a valve and the other valves working with actuating values below 100%. The pump is controlled in a way that the most poorly connected valve opens up 100%. All valves being better connected are throttled to such an extent that they are only passed through by their specified volu-mes. They are no longer preferred due to their hydraulic connection.

Figure 2: A system which has been compensated by me-ans of the DIGICONTROL HYDROMIZER

Figure 1: System WITHOUT hydraulic compensation

The DIGICONTROL HYDROMIZER module calculates the dynami-cally compensated state .....even if the hydraulic system has been compensated inadequately. Features:

Permanent hydraulic compensation during full-load and partial-load operation

Constant room temperature, no swinging, consistent heating

Energy saving of about 30% (pump)

Return temperature corresponds to dimensioning

No noises due to flow velocities that are too high

Little effort for planning and commissioning

Automatic detection of pressure loss coefficients in the pipe network

BACnet integration into existing BACnet systems

Low installation costs for ems4.HYDRO module: Simply snap it onto the top hat rail, con-nect it with the automation station via plug and configure it by means of webCADpro. The innovative Hydromizer software is embedded in the ems4.HYDRO module.

üüüüüüü ü ü

The system is permanently in the hydraulically compensated state (also in partial-load operation).ü

DIGICONTROL Hydromizer - module ems4.HYDRO

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 1716

Page 10: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

DIGICONTROL Retrofit

Cost-saving and effective refurbishment of existing systems

If new and extended requirements for the technical building equipment are laid down, the automation system usually has to be extended as well. Although the hardware of the auto-mation station is still in a good state, the entire automation station is replaced either because the existing automation station cannot be extended in a way to meet the requirements or due to limited availability. ems4.RF01E enables the extension, refurbishment and repair of existing DIGICONTROL or Saia PCD1-, PCD2-, PCD4- and PCD1.NT automation systems without discarding the existing I/O automation hardware. Savings up to 45% are realistic if you use DIGICONTROL Retrofit.

DIGICONTROL Automationssysteme

Efficient, reliable and future-proof automation

Upgrading the automation station ems2.CP04D to

ems2.CP14D

üüü

Enhanced operating concept

Improved performance

As usual: multifunctional conceptems2 is compact and simultaneously modular as the 14 inputs can be freely configured if required:

■ PT / NI1000, resolution 12-Bit ■ 0…10 VDC, resolution 12-Bit ■ Digital Inputs 24 VDC

■ 4 analogue outputs 0-10VDC ■ 6 potential-free relay outputs

Advantage: Optimum use of hardware => additional modules can often be omitted.

B-BC BACnet Building Controller

Protocol Revision 14.0AMEV profile: AS-B

DIGICONTROL Retrofit - module ems4.RF01E

ü

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 1918

Page 11: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

DIGICONTROL DEGREEN sets standards in integrated room automation.DIGICONTROL DEGREEN is an intelligent energy-efficiency display. Going beyond technical building automation, DEGREEN involves the human being in the responsible use of energy.

comfort2go - Just scan QR code and operate using a mobile device.comfort2go transfers building and room automation functions to mobi-le means of communication like smart phones and tablet-PCs by using QR-codes.

GFR provides the best solutions for room automation. iCONTROLiCONTROL enables the operation of all room automation components via standard browsers within the intra- and internet. iCONTROL additio-nally allows the organisation and administration of the room layout.

ROOM4D

DALI

For example:

ROOM4D - Room automation systems and light management

Intelligent, flexible, professional, embedded, practical, user-friendly and pleasant

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 2120

Page 12: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

ROOM4D - Room operating devices R4D.RC05 | R4D.RC06

More elegance for room automation

The room operating devices and multifunctional displays of the product line R4D.RC05 | R4D.RC06 are characterised by their brilliant design with sophisticated glass surface, dimmable multifunctional dis-play and function keys and he touch rotary pulse generator being embedded in the glass front. It is perfectly suited for all room automation applications like the control of room climate, illumination and blinds in hotels, offi ces, fl ats, hospitals, training centres, leisure time facilities, etc.

Outlook on the upcoming upgrade: ■ LED key illumination ■ Display backlight LED ■ Display with better contrast values and wider viewing angle ■ Haptic feedback when buttons are pressed ■ New capacitive technology

ROOM4D - Room touch panel R4D.RT7

A multi-talent for building and room automation

The touch panel R4D.RT7 is not only used in all fi elds of modern building and room automation for cont-rolling illumination, blinds, heating, ventilation and air-conditioning but also for the operation of extended functions like the control of multimedia systems, time switches and the setup of specifi c scenarios.

Sophisticated technology for optimum comfort ■ As the R4D.RT7 communicates with the entire automation system, it is the perfect fi t for complex applications spanning all trades in building automation.

■ Ethernet / BACnet / IP interface ■ Power supply via “Power over Ethernet“(PoE) ■ Easy confi guration using the HMI Confi gurator

ü

GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18GFR trade fair brochure - ISH 2017 in Frankfurt am Main from March 14 - 18 2322

Page 13: Trade fair issue 2017 - GFR · Trade fair issue System solutions for building management and building automation ... GFR mbH was founded in Verl, Germany, in 1978 and is, particularly

Presented by:

Subsidiaries in Germany and Europe

Die einfachste Verbindung zu uns: www.gfr.de

DIGI CONTROL undDIGI VISION sindGFR-Warenzeichenfür unsere Produkteund Dienstleistungen

GFR – QM – Systemzertifiziert nachDIN EN ISO 9001:2000

Überreicht durch:

GFR-Büros in Deutschland und EuropaGFR –– Gesellschaft für Regelungstechnik und Energieeinsparung m.b.H. Telefon TelefaxFirmenzentrale Kapellenweg 42 D-33415 Verl +49 ’ 52 46’9 62-0 +49 ’ 52 46’9 62-199Niederlassung Jena Löbstedter Straße 101 D-07749 Jena +49 ’ 36 41’46 97-0 +49 ’ 36 41’46 97-13Niederlassung Tschechien Bás̆t’ská 1692/5 CZ-18200 Praha 8 +420’2 84 68 94 20 +420’2 84 68 23 91DIGICONTROL Benelux B.V. Watermanstraat 29a NL-AJ 7324 Apeldoorn +31’ 55 36 80 53-0 +31’ 55 36 80 53-1Technisches Büro Dresden Blasewitzer Straße 41 D-01307 Dresden +49 ’ 351’4 50-42 37 +49 ’ 351’4 50-42 00Technisches Büro Berlin Friedrichshagener Str. 6b D-12555 Berlin +49 ’ 30’76 20 32 -31/-32 +49 ’ 52 46 ’ 96 22 69-502Technisches Büro Hannover Am Boksberg 3 D-31157 Sarstedt +49 ’ 50 66’99 7170 +49 ’ 52 46 ’ 96 22 69-247Technisches Büro Münster Brandenburger Straße 21 D-48565 Steinfurt +49 ’ 25 52 ’99 61-77 +49 ’ 52 46 ’ 96 22 69-501Technisches Büro Köln Theodor-Heuss-Ring 26 D-50668 Köln +49 ’ 221’2 70 76 14 +49 ’ 52 46 ’ 96 22 69-504Technisches Büro Witten Kreisstraße 51 D-58453 Witten +49 ’ 23 02 ’ 2 78 20 26 +49 ’ 52 46 ’ 96 22 69-244Technisches Büro Hamm Carlo-Schmid-Straße 38 D-59077 Hamm +49 ’ 23 81’460325 +49 ’ 52 46 ’ 96 22 69-261Technisches Büro Frankfurt Auf der Lind 9 D-65529 Waldems +49 ’ 61 26 ’ 71 09 75 +49 ’ 52 46 ’ 96 22 69-505Technisches Büro München Feringastraße 6 D-85774 München +49 ’ 89’9 9216-370 +49 ’ 89’9 9216-200

GFR-Partner in DeutschlandBoyd Regeltechnik GmbH Hohe Str. 2 D-06132 Halle +49 ’ 345’7 72 85 -0 +49 ’ 345’7 72 85 -19LUWA GmbH Oranienburger Straße 65 D-10117 Berlin +49 ’ 30’55 50 3125 +49 ’ 30’55 50 3162Klaus Slischka Mess- u. Regelungstechnik GmbH Ehrlichstraße 39 D-10318 Berlin +49 ’ 30’5 09 0175 +49 ’ 30’5 09 89 03Hartmut Lauer Mess- u. Regeltechnik GmbH Filandastraße 34 D-12169 Berlin +49 ’ 30’39 90 20-27 +49 ’ 30’39 90 20-84LSHT Handelsgesellschaft für Haustechnik mbH Cecilienstraße 8 D-12683 Berlin-Biesdorf +49 ’ 30’54 37 1110 +49 ’ 30’54 37 11 14CT Control Tech GmbH Regelungstechnik Bahnhofstraße 18 D-15344 Strausberg +49 ’ 33 41’42 93-21 +49 ’ 33 41’42 93-27OPTIMATIC Gebäudetechnik GmbH Fabriciusstraße 344 D-22177 Hamburg +49 ’ 40’6 42 5031 +49 ’ 40’6 42 99 61ERRO Gebäudetechnik GmbH Theodorstraße 41 G D-22761 Hamburg +49 ’ 40’89 96 65-0 +49 ’ 40’89 67 98Walter Wesemeyer GmbH Kurt-Fischer-Straße 20-22 D-22926 Ahrensburg +49 ’ 4102 ’4 84-0 +49 ’ 4102 ’4 84-166WIEDEMANN GmbH & Co.KG Wiedemannstraße 3 D-31157 Sarstedt +49 ’ 50 66 ’9 97-0 +49 ’ 50 66 ’9 97-193Josef Zitron Elektrogeräte & Anlagenbau Kampfeldstraße 13 D-37181 Hardegsen +49 ’ 55 03 ’24 18 +49 ’ 55 03 ’15 34Rojahn Versorgungstechnik Weseraue 9 D-37603 Holzminden +49 ’ 5531’13717 +49 ’ 55 31’12 05 64GRI – G.b.R. Trommelplatz 3 D-38875 Elbingerode +49 ’ 3 94 54’4 1610 +49 ’ 3 94 54’4 1611nowus Automatisierungstechnik GmbH Scheidebuschstr. 26 D-39126 Magdeburg +49 ’ 391’ 50 57 59-0 +49 ’ 391’ 50 31 23WIEDEMANN Industrie und Haustechnik GmbH Pappelweg 1 D-39288 Burg +49 ’ 39 21’911-0 +49 ’ 39 21’911-180VTB Versorgungstechnik Bau Burg GmbH Uferstraße 5B D-39288 Burg +49 ’ 39 21’9 34 20 +49 ’ 39 21’93 42 99Wärmeservice Kurze GmbH Rohrstraße 7 D-39576 Stendal +49 ’ 39 31’ 21 71 72 +49 ’ 39 31’ 7162 72Dieter W. Odendahl GmbH Martinusstraße 30 D-41564 Kaarst +49 ’ 21 31’6 9023 +49 ’ 21 31’6 79 76ERLA Klima- und Haustechnik GmbH Linderhauserstraße 129 D-42279 Wuppertal +49 ’ 202’2 62 66-0 +49 ’ 202’2 62 66-22GEA Schwimmbad-Komforttechnik GmbH Südstraße 48 D-44625 Herne +49 ’ 2325’4 68 08 +49 ’ 2325’4 68 400BECKERS Regeltechnik GmbH Paschenfurth 4b D-47506 Neukirchen-Vluyn +49 ’ 2845’98 00-0 +49 ’ 2845’98 05-80OSMO Anlagenbau GmbH & Co. KG Bielefelder Straße 10 D-49124 Georgmarienhütte +49 ’ 5401’858-0Sander Heizungstechnik Friederikenstraße 14 D-49124 Georgmarienhütte +49 ’ 5401’84 98 45 +49 ’ 5401’8311 85Kampmann GmbH Friedrich-Ebert-Str.128-130 D-49811 Lingen (Ems) +49 ’ 5 91’71 08-0 +49 ’ 5 91’71 08-163Hilgers Ing.-Bau GmbH Dockweilerstr. 13 D-54550 Daun +49 ’ 65 92 ’ 96 76-0 +49 ’ 65 92 ’ 96 76-27Wilhelm Schmitt GmbH Robert-Bosch-Str. 5 D-56727 Mayen +49 ’ 2651’ 98 87-32 +49 ’ 2651’ 98 87-41Jünemann & Kloß GmbH Nonnestraße 6 D-59555 Lippstadt +49 ’ 29 41’65 72 95 +49 ’ 29 41’65 76 16Axima GmbH Heßbrühlstraße 51 D-70565 Stuttgart +49 ’ 7 11’78 81-0 +49 ’ 7 11’78 81-248RETECH GmbH Haid-und-Neu-Straße 7 D-76131 Karlsruhe +49 ’ 7 21’ 96 58-612 +49 ’ 7 21’ 96 58-614Sandler Energietechnik GmbH & Co. KG Apfeltranger Straße 16 D-87600 Kaufbeuren +49 ’ 83 41’ 90 22-0 +49 ’ 83 41’ 90 22-33Building@Controls GmbH Bräugasse 1 D-92283 Lauterhofen +49 ’ 9186 ’ 90 99 -0 +49 ’ 9186 ’ 90 99 -18Blabl + Schmidt Gebäudeautomation GbR Schwalbenweg 2 D-93359 Wildenberg +49 ’ 94 44’ 97 76 -95 +49 ’ 94 44’ 97 76 -96

GFR-Partner InternationalLimosa Regeltechnik-Elektrotechnik Ges.m.b.H. Stifterstraße 2 A-3100 St. Pölten +43 ’ 2742’730 07 +43 ’ 2742’730 08Fa. Walter Zottl Gebäudeautomation Eichbergweg 1 A-2734 Puchberg +43 ’ 26 36 ’ 21 80 +43 ’ 26 36 ’ 218 04GEA Happel GmbH & Co. KG Obeltsham 15 A-4673 Gaspoltshofen +43 ’ 77 35 ’ 80 00-0 +43 ’ 77 35 ’ 80 00-130RVB Regelungs-Verteilerbau GmbH Anton Kleinoscheg Str. 3 A-8051 Graz +43 ’ 316’ 67 67 65 +43 ’ 316’ 67 67 65 65RENERGY AG Gebäudeautomation Surenweidstraße 5 CH-6208 Oberkirch +41’41’9 26 05 50 +41’41’9 26 05 55Global Control S.r.l. Via G. Stephenson 94 I-20157 Milano +390 ’2’3 90 99 11 +390 ’2’3 90 9912 20Electroszer Kft. Vajda P.U. 12.81 ép H-1089 Budapest +36 ’1’303’93 86 +36 ’1’303’93 86Keriterv Mernök Kft. Dozsa Gy. U. 14/1 H-2040 Budaörs +36 ’2’341’175 89 +36 ’2’341’175 89Albaz Engineering & Tradin S.A.R.L. Baabda, Karam&Aoun Bd. LB-Beirut / Libanon +961 ’ 9 ’ 62 30 44 +961 ’ 9 ’ 62 30 44WIEDEMANN Polska SP.z.oo Al. Jerolimskie 202 PL-02-486 Warszawa +48 ’ 22 ’ 8 63 70 86 +48 ’ 22 ’ 8 63 70 05Control System ul. Kamienskiego 201-219 PL-51126 Wroclaw +48 ’ 7 13 27 62 12 +48 ’ 7 13 20 74 78

Stan

d: 0

6/20

06

Visionen · Ideen · Konzepte – Lösungen für Gebäude mit ZukunftUnternehmens-Kurzprofil

GFR-Systemlösungen fürGebäudemanagement und Gebäudeautomation

Region RHEIN-NORDNiederlassung KölnGoethestr. 37D-50858 KölnTel.: +49 22 34/6 00 05-0Fax: +49 52 46 / 96 22 69-504

Region RUHR-EMSNiederlassung MünsterWebereistraße 1D-48565 SteinfurtTel.:+49 25 52 / 63 81 86Fax:+49 52 46 / 96 22 69-501

Büro HammCarlo-Schmid-Straße 38D-59077 HammTel.: +49 23 81/ 460325Fax: +49 52 46 / 96 22 69-261

DIGICONTROL Benelux B.V.Watermanstraat 29aNL-AJ 7324 ApeldoornTel.: +31 55 36 / 80 53-0Fax: +31 55 36 / 80 53-1

Region RHEIN-MAINNiederlassung FrankfurtAuf der Lind 8D-65529 WaldemsTel.: +49 61 26 / 71 09 75Fax: +49 52 46 / 96 22 69-505

Region SÜD-WESTNiederlassung StuttgartDornierstraße 4D-71069 SindelfingenTel.: +49 70 31/ 4100 93-40Fax: +49 52 46 / 96 22 69-508

Region BAYERNNiederlassung MünchenSembdnerstraße 5D-82110 GermeringTel.: +49 89 / 80 90 90 57-11Fax: +49 5246 / 96 22 69-523

Büro WürzburgAm Finkenflug 35D-97292 UettingenTel.: +49 93 69 / 98 22 87-0Fax: +49 52 46/96 22 69-522

Region HANSENiederlassung HamburgJacobsrade 3-21D-22962 Siek+49 4107 / 90 85 71+49 52 46 / 96 22 69-506

Region NORD-OSTNiederlassung BerlinFriedrichshagener Str. 6bD-12555 BerlinTel.: +49 30 / 76 20 32 -31Fax: +49 52 46 / 96 22 69-502

Region MITTEL-DEUTSCHLANDNiederlassung JenaRudolstädter Str. 41D-07745 JenaTel.: +49 36 41/ 46 97-0Fax: +49 36 41/ 46 97-13

Büro DresdenBlasewitzer Straße 41D-01307 DresdenTel.: +49 351/ 4 50-42 37Fax: +49 351/ 4 50-42 00

Region MITTEGFR Verl – FirmenzentraleKapellenweg 42D-33415 VerlTel.: +49 52 46 / 9 62-0Fax: +49 52 46 / 9 62-199

Niederlassung HannoverWiedemannstraße 1D-31157 SarstedtTel.: +49 50 66 / 9011-29Fax: +49 52 46 / 96 22 69-247

Niederlassung TschechienBás̆t’ská 1692/5CZ-18200 Praha 8Tel.: +42 02 84 / 68 94 20Fax: +42 02 84 / 68 23 91

GFR-Niederlassungen in Deutschland und Europa

Die einfachste Verbindung zu uns: www.gfr.de

DIGI CONTROL undDIGI VISION sindGFR-Warenzeichenfür unsere Produkteund Dienstleistungen

GFR – QM – Systemzertifiziert nachDIN EN ISO 9001:2000

Überreicht durch:

Kurzprofil 2010.indd 2-3 01.04.2010 16:26:20 Uhr

DIGICONTROL and DIGI VISION are GFR trademarksfor our products and services

www.gfr.de | facebook.com/GFRmbH

Region MitteGFR VerlCompany headquartersKapellenweg 42 D-33415 Verl Tel.: +49 52 46 / 9 62-0 Fax: +49 52 46 / 9 62-199

Subsidiary HannoverWiedemannstraße 1 D-31157 Sarstedt Tel.: +49 50 66 / 997-400 Fax: +49 52 46 / 9 62-199

Region HANSESubsidiary HamburgAlter Teichweg 37-39 D-22081 Hamburg Tel.: +49 40 / 27 832-100 Fax: +49 52 46 / 9 62-199

Region NORD-OSTSubsidiary BerlinFriedrichshagener Str. 6b D-12555 Berlin Tel.: +49 30 / 61 79 588-0 Fax: +49 52 46 / 9 62-199

Region MITTEL-DEUTSCHLANDSubsidiary JenaRudolstädter Str. 41 D-07745 Jena Tel.: +49 36 41 / 46 97-0 Fax: +49 36 41 / 46 97-13

Office DresdenLouis-Braille-Str. 8 D-01099 Dresden Tel.: +49 351 / 81 08 28-0 Fax: +49 36 41 / 46 97-13

Region BAYERNSubsidiary MünchenAdalperostraße 80 D-85737 Ismaning Tel.: +49 36 41 / 46 97-0 Fax: +49 36 41 / 46 97-13

Region SÜD-WESTSubsidiary StuttgartDornierstraße 4 D-71069 Sindelfingen Tel.: +49 70 31 / 41 00 93-40 Fax: +49 36 41 / 46 97-13

Region RHEIN-MAINSubsidiary FrankfurtGutleutstraße 322 D-60327 Frankfurt a.M. Tel.: +49 69 / 27 13 888-40 Fax: +49 52 46 / 9 62-199

Region RHEIN-NORDSubsidiary Köln Olper Straße 113 D-51491 Overath-Steinenbrück Tel.: +49 22 04 / 9 87 93-0 Fax: +49 52 46 / 9 62-199

Region RUHR-EMSSubsidiary MünsterWebereistraße 3 D-48565 Steinfurt Tel.:+49 25 52 / 63 81 87 Fax:+49 52 46 / 9 62-199

Office NordhornKokenmühlenstraße 16 D-48529 Nordhorn Tel.:+49 59 21 / 788 283-0 Fax:+49 52 46 / 9 62-199

DIGICONTROL Benelux B.V.Watermanstraat 29a NL-AJ 7324 Apeldoorn Tel.: +31 55 36 / 80 53-0 Fax: +31 55 36 / 80 53-1

GFR AustriaTrapplstraße 8 A - 3151 St. Georgen / St. Pölten Tel.: +43 27 42 / 40 500 Fax: +43 27 42 / 86 260

Office HannoverIndustrieweg 28a D-30179 Hannover Tel.: +49 511 / 89 95 97-41 Fax: +49 52 46 / 9 62-199

Subsidiary Czech RepublicVyskočilova 1326/5 CZ-140 00 Praha 4 - Michle Tel.: +420 / 236 034 500