trade products & services catalogue...simon keane - business development manager general manager...
TRANSCRIPT
TRADE PRODUCTS &
SERVICES CATALOGUE
www.networksteel.com.au
27TH EDITION EFFECTIVE AS OF 1ST MARCH 2020
“Home of the Green Beam”“Home of the Green Beam”
TRADE PRODUCTS & SERVICES CATALOGUEEFFECTIVE AS OF 1ST MARCH 2020Supersedes 26th Edition dated 1/3/19
NETWORK STEEL “Home of the Green Beam”
Website www.networksteel.com.au
All Sales Enquiries [email protected]
Purchase Orders [email protected]
Accounts [email protected]
Shop Detailing Orders / Enquiries
Sales Representatives Shane Stephenson
– Structural Steel
Rowan Baker
- Business Development Manager
Simon Keane
- Business Development Manager
General Manager Ryan Minogue
Founding Directors Peter McConnell (Managing Director)
Wayne Buchanan
Glenn Hitchcock
NOTE: All prices are subject to 10% GST
27TH EDITION
Sunshine Coast: P (07) 5353 5269
93 Enterprise St, Kunda Park
Brisbane: P (07) 3821 0424
3 Enterprise Street, Cleveland
www.networksteel.com.au
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST1
EFFECTIVE AS OF 1ST MARCH 2020
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST1
EFFECTIVE AS OF 1ST MARCH 2020
COLUMNS (Duragal)Duragal not available on sizes greater than 100mm sq
Price Per Mtr
SHS Duragal when
available
Standard col. fabrication
Corner upstand
fabrication
Basic cast in col.
fabrication
Basic one end only col. fabrication
Special col. fabrication
$34.50 per col. $41.50 per col. $32.50 per col. $25.00 per col. P.O.A.
P.O.A 40x40x2.0
P.O.A 50x50x3.0
P.O.A 50x50x4.0
P.O.A 50x50x5.0
P.O.A 65x65x3.0
P.O.A 65x65x4.0
P.O.A 65x65x5.0
P.O.A 65x65x6.0
P.O.A 75x75x2.5
P.O.A 75x75x3.0
P.O.A 75x75x4.0
P.O.A 75x75x5.0*
P.O.A 75x75x6.0
P.O.A 89x89x3.5
P.O.A 89x89x5.0
P.O.A 89x89x6.0*
P.O.A 100x100x3.0
P.O.A 100x100x4.0
P.O.A 100x100x5.0
P.O.A 100x100x6.0*
P.O.A 75x50x3.0
P.O.A 100x50x4.0
$60.50 per col. $78.00 per col. $58.50 per col. $35.50 per col. P.O.A.
P.O.A 125x125x4.0*
P.O.A 125x125x5.0*
P.O.A 150x150x5.0*
P.O.A 200x200x5.0*
The column fabrication designs below are indicative only.
All variations are available in either a duragal or hot dip galvanised finish.
PLEASE NOTE: § Column fabrication rates are inclusive of plates both ends, where applicable.
§ Metre rates listed are inclusive of cutting charges and waste factors.
§ Various other S.H.S. sizes are available - priced on application.
* Not Available in Duragal – Prime Coated Only.
IND
ICA
TIV
E
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST2
27TH EDITION
COLUMNS (Hot Dip Galvanized)
Price Per Mtr
HDG SHS
Standard col. fabrication
Corner upstand
fabrication
Basic cast in col.
fabrication
Basic one end only col. fabrication
Special col. fabrication
$42.50 per col. $50.50 per col. $39.50 per col. $30.50 per col. P.O.A.
P.O.A 40x40x2.0
P.O.A 50x50x3.0
P.O.A 50x50x4.0
P.O.A 50x50x5.0
P.O.A 65x65x3.0
P.O.A 65x65x4.0
P.O.A 65x65x5.0
P.O.A 65x65x6.0
P.O.A 75x75x2.5
P.O.A 75x75x3.0
P.O.A 75x75x4.0
P.O.A 75x75x5.0
P.O.A 75x75x6.0
P.O.A 89x89x3.5
P.O.A 89x89x5.0
P.O.A 89x89x6.0
P.O.A 100x100x3.0
P.O.A 100x100x4.0
P.O.A 100x100x5.0
P.O.A 100x100x6.0
P.O.A 75x50x3.0
P.O.A 100x50x4.0
$89.00 per col. $117.50 per col. $87.00 per col. $46.00 per col. P.O.A.
P.O.A 125X125X4.0
P.O.A 125x125x5.0
P.O.A 150X150X5.0
P.O.A 200x200x5.0
The column fabrication designs below are indicative only.
All variations are available in either a duragal or hot dip galvanised finish.
PLEASE NOTE: § Column fabrication rates are inclusive of plates both ends, where applicable.
§ Metre rates listed are inclusive of cutting charges and waste factors.
§ Various other S.H.S. sizes are available - priced on application.
IND
ICA
TIV
E
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST3
EFFECTIVE AS OF 1ST MARCH 2020
EXTRAS TO COLUMNS
Holes through SHS or RHS P.O.A
Std. Midspan Fixing Cleats P.O.A
Large Midspan Fixing Cleats P.O.A
Small Handrail Tags P.O.A
Extra over for mouse hole cut outs P.O.A
Termite Protection “lead plug” to gal vent holes in column base plate P.O.A
High speed steel drill bit 13mm titanium nitride coated P.O.A
Adjustable Post Bracket (Threaded rod style)
SHS material rates all as per pages 1 or 2
Column Fabrication – Complete Assembly Duragal H.D.Galv
Adjustable post bracket c/w standard top plate P.O.A P.O.A
Adjustable post bracket c/w corner upstand top P.O.A P.O.A
Price Per Item: to suit duragal posts (base assembly only) P.O.A
Price Per Item: to suit H.D. Gal posts (base assembly only) P.O.A
Adjustable Post Bracket (SHS sleeve stub style)
SHS material rates all as per pages 1 or 2. Available for 50sq, 75sq & 100sq SHS only
Column Fabrication – Complete Assembly Duragal H.D.Galv
Adjustable post bracket c/w standard top plate P.O.A P.O.A
Adjustable post bracket c/w corner upstand top P.O.A P.O.A
Price Per Item: to suit duragal posts (base assembly only) P.O.A
Price Per Item: to suit H.D. Gal posts (base assembly only) P.O.A
Adjustable Post Bracket (SHS material sold separately – see rates on pages 1 + 2)
Available for 75sq, 89sq + 100 sq SHS
Column Fabrication – Complete Assembly Duragal H.D.Galv
Adjustable Head bracket c/w standard Base Plate P.O.A P.O.A
Head Bracket – Sold Loose for Site Welding P.O.A P.O.A
Head Bracket – Shop welded to SHS Post P.O.A P.O.A
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST4
27TH EDITION
3.53.5 3.5
40X4 SHS 40X4 SHS
$108.00 + GST $152.00 + GST $102.00 + GST $148.00 + GST
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST5
EFFECTIVE AS OF 1ST MARCH 2020
$26.00 + GST $46.00 + GST $26.00 + GST
$26.50 + GST $47.00 + GST $26.50 + GST
$265.00 + GST $315.00 + GST$265.00 + GST $315.00 + GST
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST6
23RD EDITION
Sizes$ Per mtr Primed
Including Nail Plate Holes$ Per mtr Primed Excluding Holes
$ Per mtr Extra over Hot Dip Gal
150 UB 14 (14.0) P.O.A P.O.A P.O.A
150 UB 18 (18.0) P.O.A P.O.A P.O.A
180 UB 16 (16.1) P.O.A P.O.A P.O.A
180 UB 18 (18.1) P.O.A P.O.A P.O.A
180 UB 22 (22.2) P.O.A P.O.A P.O.A
200 UB 18 (18.2) P.O.A P.O.A P.O.A
200 UB 22 (22.3) P.O.A P.O.A P.O.A
200 UB 25 (25.4) P.O.A P.O.A P.O.A
200 UB 30 (29.8) P.O.A P.O.A P.O.A
250 UB 26 (25.7) P.O.A P.O.A P.O.A
250 UB 31 (31.4) P.O.A P.O.A P.O.A
250 UB 37 (37.3) P.O.A P.O.A P.O.A
310 UB 32 (32.0) P.O.A P.O.A P.O.A
310 UB 40 (40.4) P.O.A P.O.A P.O.A
310 UB 46 (46.2) P.O.A P.O.A P.O.A
360 UB 45 (44.7) P.O.A P.O.A P.O.A
360 UB 51 (50.7) P.O.A P.O.A P.O.A
360 UB 57 (56.7) P.O.A P.O.A P.O.A
410 UB 54 (53.7) P.O.A P.O.A P.O.A
410 UB 60 (59.7) P.O.A P.O.A P.O.A
460 UB 67 (67.1) P.O.A P.O.A P.O.A
460 UB 75 (74.6) P.O.A P.O.A P.O.A
460 UB 82 (82.1) P.O.A P.O.A P.O.A
530 UB 82 (82.0) P.O.A P.O.A P.O.A
530 UB 92 (92.4) P.O.A P.O.A P.O.A
610 UB 101 (101) P.O.A P.O.A P.O.A
610 UB 113 (113) P.O.A P.O.A P.O.A
610 UB 125 (125) P.O.A P.O.A P.O.A
# For extras to beams below, please refer to page 8
#For mill finish only refer retail cost book
§ Per metre rates noted include all cutting charges & waste factors
§ Prime coat: electric wire brish & one coat green anticorrosive enamel paint - recommended for
concealed applications only
UNIVERSAL BEAMS “Home of the Green Beam”
27TH EDITION
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST7
EFFECTIVE AS OF 1ST JULY 2016
Sizes$ Per mtr Primed
Including Nail Plate Holes$ Per mtr Primed Excluding Holes
$ Per mtr Extra over Hot Dip Gal
100 UC 15 (14.8) P.O.A P.O.A P.O.A
150 UC 23 (23.4) P.O.A P.O.A P.O.A
150 UC 30 (30.0) P.O.A P.O.A P.O.A
150 UC 37 (37.2) P.O.A P.O.A P.O.A
200 UC 46 (46.2) P.O.A P.O.A P.O.A
200 UC 52 (52.2) P.O.A P.O.A P.O.A
200 UC 59 (59.5) P.O.A P.O.A P.O.A
250 UC 73 (72.9) P.O.A P.O.A P.O.A
250 UC 89 (89.5) P.O.A P.O.A P.O.A
310 UC 97 (96.8) P.O.A P.O.A P.O.A
310 UC 118 (118) P.O.A P.O.A P.O.A
310 UC 137 (137) P.O.A P.O.A P.O.A
310 UC 158 (158) P.O.A P.O.A P.O.A
# For extras to beams below, please refer to page 8
#For mill finish only refer retail cost book
§ Per metre rates noted include all cutting charges & waste factors
§ Prime coat: electric wire brish & one coat green anticorrosive enamel paint - recommended for
concealed applications only
Sizes$ Per mtr Primed
Including Nail Plate Holes$ Per mtr Primed Excluding Holes
$ Per mtr Extra over Hot Dip Gal
75 x 40 (6.65) P.O.A P.O.A P.O.A
100 x 50 (9.34) P.O.A P.O.A P.O.A
125 x 65 (13.42) P.O.A P.O.A P.O.A
150 x 75 (17.70) P.O.A P.O.A P.O.A
180 x 75 (20.90) P.O.A P.O.A P.O.A
200 x 75 (22.90) P.O.A P.O.A P.O.A
230 x 75 (25.10) P.O.A P.O.A P.O.A
250 x 90 (35.50) P.O.A P.O.A P.O.A
300 x 90 (40.10) P.O.A P.O.A P.O.A
380 x 100 (55.20) P.O.A P.O.A P.O.A
(PFC BEAMS)PARALLEL FLANGE CHANNEL “Home of the Green Beam”
UNIVERSAL COLUMNS “Home of the Green Beam”
EFFECTIVE AS OF 1ST MARCH 2020
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST8
27TH EDITION
LINTELS STITCH WELDED TO U-BEAMS & CHANNELSKgs Per Metre ($) Primed HDG R4
100 x 100 x 10 Angle Lintel 14.2 P.O.A P.O.A P.O.A
125 x 125 x 10 Angle Lintel 18.0 P.O.A P.O.A P.O.A
150 x 100 x 10 Angle Lintel 18.0 P.O.A P.O.A P.O.A
150 x 150 x 10 Angle Lintel 21.9 P.O.A P.O.A P.O.A
200 x 10 Flat Lintel 16.1 P.O.A P.O.A P.O.A
250 x 10 Flat Lintel 20.11 P.O.A P.O.A P.O.A
EXTRAS TO U-BEAMS & CHANNELS
Item ($), Value
Plated Splay Cuts To Channels P.O.A
Plated Splay Cuts To U-Beams P.O.A
Notched Ends P.O.A
Two Hole End Plates To Channels P.O.A
Four Hole End Plates To U-Beams P.O.A
Standard Connection Plates P.O.A
X-Large Connection Plates P.O.A
Stiffener Plates P.O.A
Purlin Cleats P.O.A
Shs Stub Column – Shop Welded To Floor Beam Connecting With Garage Beam P.O.A
M12 X 45 Bolt, Nut & Washer Z/P (Gr8.8) P.O.A
M16 X 45 Bolt, Nut & Washer Z/P (Gr8.8) P.O.A
M20 X 50 Bolt, Nut & Washer Z/P (Gr8.8) P.O.A
Hot Dip Galvanizing Standard Service - Beams P.O.A
Hot Dip Galvanizing Standard Service - Columns P.O.A
Hot Dip Galvanizing Standard Service - Welded Portals P.O.A
Hot Dip Galvanising of Less than 300 Kg P.O.A
Hot Dip Galvanizing Silver Bullet Service P.O.A
Stitch Weld Angle Lintel To Pfc (Hit 50 Miss 200) P.O.A
Shop Weld Pfc Portal (Plus Stiffeners, End Plates, Bolts) P.O.A
Shop Weld Pfc Portal (Plus Stiffeners, End Plates, Bolts) P.O.A
Shop Weld U-B Portal (Plus Stiffeners, End Plates, Bolts) P.O.A
Shop Weld U-B Portal (Plus Stiffeners, End Plates, Bolts) P.O.A
30x30x3 EA Stitch Welded To Beams (Steel Frame Requirements) P.O.A
50x50x3 EA Stitch Welded To Beams (Steel Frame Requirements) P.O.A
65x65x5 EA Stitch Welded To Beams (Steel Frame Requirements) P.O.A
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST9
EFFECTIVE AS OF 1ST MARCH 2020
GENERAL NOTES:
1. Available to suit standard 2440, 2590 & 2740 ceiling heights.
Custom sizes available on request.
2. All Loads quoted are Ultimate Limit Stage - Per Netbrace® Frame
3. Netbrace serviceability deflection Limits Height/ 250 or 10mm Max.
Lateral Deflection
4. Netbrace® capable of co-existing loads (refer to load bearing capacity table)
INSTALLATION NOTES:
• In order to achieve compliance – Installer must use: 4 x Chemical
Anchors - Hilti (HIT-HY 200 - R + HIT-VF (8.8) M16 - 220mm minimum
embedment or approved equivalent
• In order to achieve compliance – Installer must ensure minimum stud
anchor edge distances to slab - Refer to diagram
• Stud frames and top plates to be fixed to the NETBRACE with self
drilling screws. Series 500 x 75mm at 300 CRS to studs, minimum 4
screws to top plate/ transfer blocks.
ORDER CODE
Wall Height (mm)
Brace Height (mm)
NBR Width (mm)
Lateral Bracing
Capacity
Load Bearing Capacity(Upper Floor & Roof Across
Width of Brace)
$ Per unit (ex
GST)
NBR24-350 2440 2400 350 8.7 kN 100 kN P.O.A
NBR24-450 2440 2400 450 11.1 kN 100 kN P.O.A
NBR24-600 2440 2400 600 14.9 kN 100 kN P.O.A
NBR255-350 2590 2550 350 8.2 kN 100 kN P.O.A
NBR255-450 2590 2550 450 10.4 kN 100 kN P.O.A
NBR255-600 2590 2550 600 13.9 kN 100 kN P.O.A
NBR27-350 2740 2700 350 7.7 kN 100 kN P.O.A
NBR27-450 2740 2700 450 9.9 kN 100 kN P.O.A
NBR27-600 2740 2700 600 13.2 kN 100 kN P.O.A
NBR-FIX FIXINGS PACK (25x TEX SCREWS & 4x ANCHOR STUDS) P.O.A
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST10
27TH EDITION
DESIGN & CONSTRUCT SERVICES
DescriptionShop Detailing only
($ per member)Engineering and Shop Detailing
Packages ($ per member)
QTY 8 & over P.O.A P.O.A
QTY 7 & under P.O.A P.O.A
OF CONNECTION PLATE UNOALL MEMBERS BOLT TO RIGHT SIDE
RIGHT UP
APPLIES TO PLAN VIEWS ONLY
07 3152 7455 Fax: 073821 04263 Enterprise StreetCleveland Qld 4163
Owner:
Ph: 07 3821 0424INDICATES MARK LOCATION
Job
No.
Drg
No.
Issu
e:
Detailing Office Phone No:
Subu
rb:
Design:
SCALE: NTS
Address:
Drawn: Checked:ALSD REVISION STATUS
= APPROVAL = CONSTRUCTIONCA ARCH
ITEC
TS R
EV P
ROVI
DED
ENGI
NEER
S RE
V PR
OVID
ED
RE
VIS
ION
DAT
E
. . .
...
C1
09.0
5.2
018
A2
22.0
5.2
018
C2
25.0
5.2
018
P: 07 3152 7455 M: 0410 472 653F: 07 4045 5352 E:[email protected] 3D1
04.0
5.2
018
424-17A1
LONG RESIDENCE
LOT 2 - 13 GREER TERRACE
FOR CONSTRUCTIOND S2
TL KH
SOUTHPORT
MR & MRS LONG
3D VIEW - COATING LEGENDALSD NO: 1065_18
SHOP PRIMED
GALVANIZED
SHOP PRIMED FITTINGS
R4 RATING GALVANIZED
NETWORK TSP & NETBRACE (DURAGAL)
TIMBERCO
LO
UR
CO
AT
ING
LE
GE
ND
DURAGAL WITH -
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST11
EFFECTIVE AS OF 1ST MARCH 2020
ENGINEERING SERVICES
Description Value ($)
Beam / Column Steel Design (Includes Form 15) P.O.A
Form 15 Certification only P.O.A
Bracing Design - Lowset House P.O.A
Bracing Design - Highset House P.O.A
Engineering Designs on Hourly Rate P.O.A
Form 16 Site Inspection P.O.A
CROSS BRACING
DescriptionSupply Only With Cleats To Ends For Bolted Connection
Supplied and Site Welded
“First Bay” Incl. Travel
Additional Bays
25x25x3 pre-gal SHS incl. waste factor N/A P.O.A P.O.A
16mm round M.S. primed incl. waste factor N/A P.O.A P.O.A
16mm round M.S. galv. c/w turnbuckles P.O.A P.O.A P.O.A
16mm round M.S. galv c/w tension ring P.O.A P.O.A P.O.A
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST12
27TH EDITION
DELIVERY CHARGES 2D Single Sticks Only
LOCATION Price Per Drop
Brisbane - Other Suburbs (up to 9000mm long) P.O.A
Gold Coast - to Tweed Heads (up to 9000mm long) P.O.A
Kingscliffe/Pottsville (up to 9000mm long) P.O.A
Byron / Ballina (up to 9000mm long) P.O.A
Sunshine Coast - to Noosa (up to 9000mm long) P.O.A
Ipswich To Toowoomba (up to 9000mm long) P.O.A
Regional Towns – Gladstone, Chinchilla etc (up to 9000mm long) P.O.A.
DELIVERY CHARGES 3D Welded Portal Frames
LOCATION Price Per Drop
Brisbane / Redlands (Up to 9000mm Long x 3400mm wide) P.O.A
Gold Coast - to Tweed Heads (Up to 9000mm Long x 3400 wide) P.O.A
Sunshine Coast - to Noosa (Up to 9000mm Long x 3400 wide) P.O.A
Byron / Ballina P.O.A
All other areas P.O.A
EXTRAS (Added to 2D rates above)
ITEM Extra Over
Specific Time (eg. First up) - Brisbane (Dedicated Truck Required) P.O.A
Specific Time (eg. First up) - Gold Coast (Dedicated Truck Required) P.O.A
Specific Time (eg. First up) - Sunshine Coast (Dedicated Truck Required) P.O.A
Semi required for Long Lengths - Brisbane (Up to 13M Long) P.O.A
Semi required for Long Lengths - Gold Coast (Up to 13M Long) P.O.A
Semi required for Long Lengths - Sunshine Coast (Up to 13M Long) P.O.A
Note: Delivery rates are a guide only and are subject to change depending on
load requirements or site conditions.
Note: Jobs consisting of more then 3 Ton could be subject to extra freight charges
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST13
EFFECTIVE AS OF 1ST MARCH 2020
STRINGERS (Hot Dip Galvanized) 170mm Rise
100x50 RHS Stringers c/w 250mm leg Gross Weight H.D. Galv
1/Pair of 1 tread (3mm BMT) 0.010 P.O.A
1/Pair of 2 tread (3mm BMT) 0.014 P.O.A
1/Pair of 3 tread (3mm BMT) 0.019 P.O.A
1/Pair of 4 tread (3mm BMT) 0.024 P.O.A
1/Pair of 5 tread (3mm BMT) 0.029 P.O.A
1/Pair of 6 tread (3mm BMT) 0.034 P.O.A
1/Pair of 7 tread (3mm BMT) 0.038 P.O.A
1/Pair of 8 tread (3mm BMT) 0.043 P.O.A
1/Pair of 9 tread (3mm BMT) 0.048 P.O.A
1/Pair of 10 tread (3mm BMT) 0.053 P.O.A
1/Pair of 11 tread (3mm BMT) 0.057 P.O.A
1/Pair of 12 tread (3mm BMT) 0.062 P.O.A
1/Pair of 13 tread (4mm BMT) 0.083 P.O.A
1/Pair of 14 tread (4mm BMT) 0.089 P.O.A
1/Pair of 15 tread (6mm BMT) 0.129 P.O.A
1/Pair of 16 tread (6mm BMT) 0.137 P.O.A
1/Pair of 17 tread (6mm BMT) 0.145 P.O.A
EXTRAS TO STRINGERS
Item Price per Pair
Fixing Plates to Base P.O.A
Fixing Plates on return to landing P.O.A
CAD Detailing to Special Requirements P.O.A
Special Rise – Hand Built out of jig P.O.A
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST14
27TH EDITION
FABRICATED BRICK LINTELSPrimed
$ per metreHot Dip Galvanized
$ per metreR4 Rated Coating
$ per metre
100 x 100 x 10 M.S. Angle P.O.A P.O.A P.O.A
125 x 125 x 10 M.S. Angle P.O.A P.O.A P.O.A
150 x 100 x 10 M.S. Angle P.O.A P.O.A P.O.A
150 x 150 x 10 M.S. Angle P.O.A P.O.A P.O.A
150 x 100 x 10 M.S. Angle c/w 90 x 8 FMS Vertical Flange Extension
P.O.A P.O.A P.O.A
Fixing Holes to Above P.O.A P.O.A P.O.A
BRICK LINTELS (Arch Bars )
Flat Metre ($) each per UNITR4 Rated Coating ($) each per UNIT
85 x 7 0.900 P.O.A P.O.A
85 x 7 1.000 P.O.A P.O.A
85 x 7 1.200 P.O.A P.O.A
Angle Metre ($) each per UNIT ($) each per UNIT
100 x 100 0.900 P.O.A P.O.A
100 x 100 1.200 P.O.A P.O.A
100 x 100 1.500 P.O.A P.O.A
100 x 100 1.800 P.O.A P.O.A
100 x 100 2.100 P.O.A P.O.A
100 x 100 2.400 P.O.A P.O.A
100 x 100 2.700 P.O.A P.O.A
150 x 100 2.100 P.O.A P.O.A
150 x 100 2.400 P.O.A P.O.A
150 x 100 2.700 P.O.A P.O.A
150 x 100 3.000 P.O.A P.O.A
150 x 100 3.300 P.O.A P.O.A
150 x 100 3.600 P.O.A P.O.A
150 x 100 4.000 P.O.A P.O.A
200 x 100 5.200 P.O.A P.O.A
200 x 100 6.000 P.O.A P.O.A
Note: A Brick Lintel cutting charge of $14 would be applied if specific dimensions are required.
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST15
EFFECTIVE AS OF 1ST MARCH 2020
TEE BEAMS (Suitable for Double Skin Brickwork)
Tee Beam Metre $ each per unitR4 Rated Coating
$ each per unit
200 x 8 + 200 x 6 “T” 2700 P.O.A P.O.A
200 x 8 + 200 x 6 “T” 3000 P.O.A P.O.A
200 x 8 + 200 x 6 “T” 3300 P.O.A P.O.A
200 x 8 + 200 x 6 “T” 3600 P.O.A P.O.A
200 x 8 + 200 x 6 “T” 3900 P.O.A P.O.A
Longspan Tee beam Metre $ each per unitR4 Rated Coating
$ each per unit
200 x 10 + 200 x 10 “T” 4200 P.O.A P.O.A
200 x 10 + 200 x 10 “T” 4500 P.O.A P.O.A
200 x 10 + 200 x 10 “T” 4800 P.O.A P.O.A
200 x 10 + 200 x 10 “T” 5200 P.O.A P.O.A
200 x 10 + 200 x 10 “T” 5400 P.O.A P.O.A
200 x 10 + 200 x 10 “T” 5700 P.O.A P.O.A
200 x 10 + 200 x 10 “T” 6000 P.O.A P.O.A
SPECIAL LINTEL FREIGHT RATES (Applicable to Lintels & Tee Beams Only)
Brisbane Metro (Minimum 3 Day Call Up) P.O.A
Gold Coast (Minimum 3 Day Call Up) P.O.A
Sunshine Coast (Minimum 3 Day Call Up) P.O.A
Note: A Tee beam cutting charge of $24 would be applied if specific dimensions are required.
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST16
27TH EDITION
Indicative Pricing for:
INSTALLATION OF STRUCTURAL STEEL TO RESIDENTIAL HOUSING
Half Day Rate
Maximum of 3 Beams and 5 Columns P.O.A
(Includes 2 man team plus Franna Crane & driver)
Extra Over for Slew Crane (up to 30 Ton) P.O.A
Extra Man for Half Day P.O.A
Full Day Rate
Maximum of 6 Beams and 9 Columns P.O.A
(Includes 2 man team plus Franna Crane & driver)
Extra Over for Slew Crane (up to 30 Ton) P.O.A
Extra Man for Full Day P.O.A
Network Steel installation services are offered on the understanding that the following basic requirements are provided.
§ Scaffolding and edge protection by head contractor.§ No allowance for set out, positioning or grouting of cast in bolts.§ Good clean access required in and around site for cranes, trucks, personnel and access equipment.§ Head Contractor to provide grid lines and datum levels sufficient for a set out to proceed.§ U.N.O removal or reinstatement of existing materials is excluded.§ Unless stated all site work to be carried out during standard hours of 7:00am to 4:30pm Monday to Friday§ Road closures and/or protection to power lines by head contractor.
ON-SITE CUTTING & WELDING
Tradesman P.O.A
Trades Assistant P.O.A
Generator Hire P.O.A
Note: Minimum Charge In Redlands > 45 Mins P.O.A
Note: Minimum Charge In Brisbane Metro > 45 Mins P.O.A
Note: Minimum Charge, Outer Areas > 45 Mins (I.e. Caboolture/Pine Rivers/Ipswich/Beaudesert)
P.O.A
Note: Minimum Charge Gold Coast > 45 Mins P.O.A
Note: Minimum Charge Sunshine Coast > 45 Mins P.O.A
Onsite Cut + Cap Columns (Incl. Std Vert. Upstand Bkt) P.O.A
# For extended hours on site, special rates can be negotiated
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST17
EFFECTIVE AS OF 1ST MARCH 2020
BOLTS TO SUIT FRAME HARDWARE(sold as complete assemblies with bolt, nut and washer)
Item No. Description QTY Sell Price Ex GST
Tru Bolts
G/TRU-B 12/100 Tru Bolt HDG 12/100 (Std Qty per pack 20 off) each P.O.A
M12 Hex Head Bolt, Nut and Washer Assembly
OBM12/100 Hex Head B, N&W 12x100mm HDG (Std Qty per pack 100 off) each P.O.A
OBM12/110 Hex Head B, N&W 12x110mm HDG (Std Qty per pack 75 off) each P.O.A
OBM12/120 Hex Head B, N&W 12x120mm HDG (Std Qty per pack 75 off) each P.O.A
OBM12/130 Hex Head B, N&W 12x130mm HDG (Std Qty per pack 75 off) each P.O.A
OBM12/150 Hex Head B, N&W 12x150mm HDG (Std Qty per pack 75 off) each P.O.A
M12 Cup Head Bolt, Nut and Washer Assembly
OCBM12/65 Cup Head B, N&W 12x65mm HDG (Std Qty per pack 150 off) each P.O.A
OCBM12/75 Cup Head B, N&W 12x75mm HDG (Std Qty per pack 150 off) each P.O.A
OCBM12/90 Cup Head B, N&W 12x90mm HDG (Std Qty per pack 100 off) each P.O.A
OCBM12/100 Cup Head B, N&W 12x100mm HDG (Std Qty per pack 100 off) each P.O.A
OCBM12/120 Cup Head B, N&W 12x120mm HDG (Std Qty per pack 100 off) each P.O.A
OCBM12/130 Cup Head B, N&W 12x130mm HDG (Std Qty per pack 75 off) each P.O.A
OCBM12/150 Cup Head B, N&W 12x150mm HDG (Std Qty per pack 75 off) each P.O.A
OCBM12/180 Cup Head B, N&W 12x180mm HDG (Std Qty per pack 75 off) each P.O.A
OCBM12/200 Cup Head B, N&W 12x200mm HDG (Std Qty per pack 75 off) each P.O.A
OCBM12/220 Cup Head B, N&W 12x220mm HDG (Std Qty per pack 50 off) each P.O.A
Post Caps
K50MSGBW Square Galvabond Caps 50x50 each P.O.A
K65MSGBW Square Galvabond Caps 65x65 each P.O.A
K75MSGBW Square Galvabond Caps 75x75 each P.O.A
K100MSGBW Square Galvabond Caps 100x100 each P.O.A
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST18
27TH EDITION
FRAME HARDWARE(see photo gallery page 19)
Item Description QTY Sell Price Ex GST
NET90W33Ø75H Post Support Bracket 90 ‘T’ blade on solid rod bolt down each P.O.A
NET90W33Ø150H Post Support Bracket 90 ‘T’ blade on solid rod bolt down each P.O.A
NET90W33Ø300H Post Support Bracket 90 ‘T’ blade on solid rod bolt down each P.O.A
NET130W33Ø150H Post Support Bracket 130 ‘T’ blade on solid rod bolt down each P.O.A
NET130W33Ø300H Post Support Bracket 130 ‘T’ blade on solid rod bolt down each P.O.A
NET130W33Ø600H Post Support Bracket 130 ‘T’ blade on solid rod bolt down each P.O.A
NET180W33Ø150H Post Support Bracket 180 ‘T’ blade on solid rod bolt down each P.O.A
NET180W33Ø300H Post Support Bracket 180 ‘T’ blade on solid rod bolt down each P.O.A
NETPBS200 Post Blade Stirrup HDG x 200 long each P.O.A
NETPBS120 Post Blade Stirrup HDG x 120 long each P.O.A
NETPBS75 Post Blade Stirrup HDG x 75 long each P.O.A
NET180CP (Column Stool) 10mm claw plate each P.O.A
NET-SERV 40sq SHS servery bracket 400x600 each P.O.A
NET-STEP 3mm pressed step tread bracket each P.O.A
NET-150EA150 150x150x10 bracket x 150 long 4/14 dia each P.O.A
NET-150EA200 150x150x10 bracket x 200 long 4/14 dia. each P.O.A
NET-150EA250 150x150x10 bracket x 250 long 4/14 dia. each P.O.A
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST19
EFFECTIVE AS OF 1ST MARCH 2020
FRAME HARDWARE
Post Support Brackets
‘T’ Blade on 33Ø Solid
Rod
NET90W33Ø75H
NET90W33Ø150H
NET90W33Ø300H
NET130W33Ø150H
NET130W33Ø300H
NET130W33Ø600H
NET180W33Ø150H
NET180W33Ø300H
Servery Bracket
40sq SHS Duragal
400x600 legs
NET-SERV
Post Blade Stirrup ‘T’
Blade on 33Ø Solid
Rod with Spigot
To Suit min. 130sq Post
NETPBS75
NETPBS200
NETPBS120
Column Stools Cast
in type with 10Ø Claws
To Suit Site Welded Steel Posts
NET180CP
Connection Brackets
Assorted Sizes
NET-150EA150
NET-150EA200
NET-150EA250
Disclaimer: - Many of the designs depicted are not engineered, Network Steel Fabrications recommends that the
purchaser considers the application and consults their engineer where & when certification is warranted.
TRADE PRODUCTS &
SERVICES CATALOGUE
Please note: All prices listed herein are subject to change without notice.
All prices are subject to 10% GST20
27TH EDITION
STRUCTURAL STEEL to“Residential Applications”
Home of the Green Beam
Why choose Network Steel for
residential projects?
Lots of good reasons:
§ 28 years in the business
§ Deal directly with one of three working directors
§ 24 page trade catalogue, ideal for budget pricing and
for scheduling of purchase orders
§ Prompt pricing from design drawings.
§ Regular steel industry pricing forecasts
§ Site measure and CAD detail capabilities
§ Daily freight runs throughout South East Queensland
and Northern Rivers
§ Site welding and installation services available upon
request
§ Geared towards servicing all facets of the residential
building industry from the smallest renovation through
to the largest multi density development
Most importantly we are backed by a great team of
individuals who focus on repeat business, developing
long standing relationships and a commitment to
delivering products and services to your expectation.
Sutcom Construction Services
McDonald St, Hawthorne
Contrast Constructions
Currumbin Ridge
Stroud Homes
Rode Rd, Wavell Heights
EFFECTIVE AS OF 1ST MARCH 2020
Brisbane
3 Enterprise Street,
Cleveland QLD 4163
(07) 3821 0424
www.networksteel.com.au
Sunshine Coast
93 Enterprise Street,
Kunda Park QLD 4556
(07) 5353 5269
LOCATIONS
www.networksteel.com.au
MISSION: To uphold our reputation and act with integrity in the pursuit of remaining at the
forefront of our industry; to build strong relationships with our clients and be
recognised for our reliability and professional attitude; to value the contribution of
our employees and to create an environment where our team can use their individual
strengths & experiences to provide innovative ideas in the construction of quality
Structural Steel and Aluminum Metalwork products and services.
OUR JOURNEY In 1992, four business partners laid the modest, yet unwavering foundations for a
partnership. Today, that enduring partnership has advanced to become Network
Steel & Aluminium - South East Queensland’s largest and most dependable fabricator
of Structural Steel and Aluminium Metalwork to residential applications. Through
innovation and professionalism, our business has evolved from having our original
directors working on the factory floor; to an enterprise that is supported by rigorous
procedures and has a solid business model, which now employs over 75 staff, that
contribute to our ongoing success.
Sunshine Coast: P (07) 5353 5269
93 Enterprise St, Kunda Park
Brisbane: P (07) 3821 0424
3 Enterprise Street, Cleveland