trademarks of freescale semiconductor, inc., reg. u.s. pat ... · tm 4 overview to set up the isf...

TM

Freescale, the Freescale logo and CodeWarrior are

trademarks of Freescale Semiconductor, Inc., Reg.

U.S. Pat. & Tm. Off. Xtrinsic is a trademark of

Freescale Semiconductor, Inc.

All other product or service names are the property

of their respective owners.

© 2013 Freescale Semiconductor, Inc.

TM

2

Objectives

In this module, you will become familiar with the software

installations required to set up the Xtrinsic ISF development

environment.

Upon completion, all required software will be installed and

your development PC will be prepared for developing,

installing, and executing ISF user applications.

Module 1

ObjectivesPrerequisites

OverviewInstalling CodeWarrior

10.5 with ColdFire Support

Installing the ISF 1.1 Library

Module SummaryNext Steps

TM

3

Prerequisites

To complete this module, you will need a Windows 7 PC meeting

the following minimum requirements:

• Pentium 4 or newer

• 4 GB of RAM

• 2 USB ports (1.0, 2.0, or 3.0)

The PC must have an internet connection.

Module 1






TM

4

Overview

To set up the ISF user application development environment for the

FXLC95000 intelligent sensing framework, three software

components must be installed on the developer PC by following the

instructions in this training module.

1. CodeWarrior 10.5 or newer (with inherent ColdFire support)

2. FSL_MQX_3.7_FXLC95K

3. ISF 1.1 Library

Note: These installations require a Freescale login ID and acceptance of a software

license for each package. For the purposes of this training, an evaluation copy of

CodeWarrior is all that is required.

Module 1






TM

5

Installing CodeWarrior 10.5 with ColdFire support

The first software installation is CodeWarrior 10.5 or

newer with ColdFire support.

If installing CodeWarrior 10.5 for the first time,

complete the following steps.

1. If you have not downloaded the CodeWarrior

10.5 installer file, download it. A link is available

on the Xtrinsic ISF product page

(freescale.com/ISF).

2. Run the CodeWarrior 10.5 installer file.

3. Follow the setup wizard instructions. When

asked to select components to install, check the

ColdFire check box.

If CodeWarrior 10.5 is already installed and the

ColdFire component is not installed, complete the

following steps.

1. Open CodeWarrior.

2. From the Help menu, select Install New

Software, and then select ColdFire.

You can tell if CodeWarrior is already

installed on your system by going to

the Windows Start Menu and

looking under “All Programs” for

“Freescale CodeWarrior”.

Module 1






TM

6


The final installation

required is the ISF 1.1

Library.

Go to the Overview page

of the Freescale Xtrinsic

ISF website and click on

“Download the latest

version”.

In the pop up window,

click on the download

and follow the installation

instructions in the install

wizard.

Module 1






TM

7

Checkpoint:

The best way to locate the

documentation is to go to the

Microsoft Start Icon and look for

the shortcuts under

“All Programs\Freescale\Documentation”.

The Documentation folder

contains a copy of the

ISF API Reference Manual,

Software Reference Manual,

Release Notes,

Installation Instructions,

Fact Sheets, etc.

Module 1






TM

8

Checkpoint:

ISF on your system should have the following directory structure

• Documentation contains a subset of the information from the previous slide.

• Example Applications contains CodeWarrior Projects that can be used as example

projects.

• ISF contains the libraries for the ISF components and the sensor adapters.

• Prebuilt Applications contains S19 files that can be easily loaded and run on a

KITFXLC95000EVM system.

• Training contains these training modules.

Module 1






TM

9

Checkpoint:

The Example Applications folder contains all of the CodeWarrior

example projects supported at the time of the release. Do not be

alarmed if your installation has more than what is shown here. Your

installation should have at least what is shown here.

Module 1






TM

10

Module Summary

This completes Module 1—Installing necessary software

At this point, you should understand that two software installations

are required to prepare the Xtrinsic ISF development environment

for developing ISF user applications.

1. CodeWarrior 10.5 or newer (with ColdFire support)

2. FSL_MQX_3.7_FXLC95K

3. ISF 1.1 Library

Module 1






TM

11

Next Steps

Now that your Xtrinsic ISF development PC is prepared, you are

ready to begin working with ISF user applications.

The first step is learning how to run an existing S19 binary image

created by Freescale.

Please continue to Module 2—Installing an ISF S19 binary.

Module 1






trademarks of freescale semiconductor, inc., reg. u.s. pat ... · tm 4 overview to set up the isf...

Documents