Traffic Matrix Estimation for Traffic Engineering

Mehmet Umut Demircin

Traffic Engineering (TE)

TasksLoad balancingRouting protocols configurationDimensioningProvisioningFailover strategies

Particular TE Problem

Optimizing routes in a backbone network in order to avoid congestions and failures.Minimize the max-utilization.MPLS (Multi-Protocol Label Switching)

Linear programming solution to a multi-commodity flow problem.

Traditional shortest path routing (OSPF, IS-IS) Compute set of link weights that minimize congestion.

Traffic Matrix (TM)

A traffic matrix provides, for every ingress point i into the network and every egress point j out of the network, the volume of traffic Ti,j from i to j over a given time interval.

TE utilizes traffic matrices in diagnosis and management of network congestion.

Traffic matrices are critical inputs to network design, capacity planning and business planning.

Traffic Matrix (cont’d)

Ingress and egress points can be routers or PoPs.

Determining the Traffic Matrix

Direct Measurement:TM is computed directly by collecting flow-level measurements at ingress points.

Additional infrastructure needed at routers. (Expensive!)

May reduce forwarding performance at routers. Terabytes of data per day.

Solution = Estimation

TM Estimation

Available information:Link counts from SNMP data.Routing information. (Weights of links)Additional topological information. ( Peerings,

access links)Assumption on the distribution of demands.

Traffic Matrix Estimation:Existing Techniques and New

Directions

A. Madina, N. Taft, K. Salamatian, S. Bhattacharyya, C. Diot

Sigcomm 2003

Three Existing Techniques

Linear Programming (LP) approach. O. Goldschmidt - ISMA Workshop 2000

Bayesian estimation. C. Tebaldi, M. West - J. of American Statistical Association,

June 1998.

Expectation Maximization (EM) approach. J. Cao, D. Davis, S. Vander Weil, B. Yu - J. of American

Statistical Association, 2000.

Terminology c=n*(n-1) origin-destination (OD) pairs. X: Traffic matrix. (Xj data transmitted by OD pair j) Y=(y1,y2,…,yr ) : vector of link counts. A: r-by-c routing matrix (aij=1, if link i belongs to

the path associated to OD pair j)

Y=AXr<<c => Infinitely many solutions!

Linear Programming

Objective:

Constraints:

Statistical Approaches

Bayesian Approach

Assumes P(Xj) follows a Poisson distribution with mean λj. (independently dist.)

needs to be estimated. (a prior is needed)

Conditioning on link counts: P(X,Λ|Y)Uses Markov Chain Monte Carlo (MCMC) simulation

method to get posterior distributions. Ultimate goal: compute P(X|Y)

Expectation Maximization (EM)

Assumes Xj are ind. dist. Gaussian.

Y=AX implies:

Requires a prior for initialization. Incorporates multiple sets of link measurements. Uses EM algorithm to compute MLE.

Comparison of Methodologies

Considers PoP-PoP traffic demands. Two different topologies (4-node, 14-node). Synthetic TMs. (constant, Poisson, Gaussian,

Uniform, Bimodal) Comparison criteria:

Estimation errors yielded. Sensitivity to prior. Sensitivity to distribution assumptions.

4-node topology

4-node topology results

14-node topology

14-node topology results

Marginal Gains of Known Rows

New Directions Lessons learned:

Model assumptions do not reflect the true nature of traffic. (multimodal behavior)

Dependence on priors Link count is not sufficient (Generally more data is

available to network operators.) Proposed Solutions:

Use choice models to incorporate additional information.

Generate a good prior solution.

New statement of the problem

Xij= Oi.αijOi : outflow from node (PoP) i.αij : fraction Oi going to PoP j.Equivalent problem: estimating αij .

Solution via Discrete Choice Models (DCM).User choices. ISP choices.

Choice Models

Decision makers: PoPs Set of alternatives: egress PoPs. Attributes of decision makers and alternatives:

attractiveness (capacity, number of attached customers, peering links).

Utility maximization with random utility models.

Random Utility Model

Uij= Vi

j + εij : Utility of PoP i choosing to

send packet to PoP j. Choice problem: Deterministic component:

Random component: mlogit model used.

Results Two different models (Model 1:attractiveness, Model 2: attractiveness + repulsion )

Fast Accurate Computation of Large-Scale IP Traffic Matrices from

Link Loads

Y. Zhang, M. Roughan, N. Duffield, A. Greenberg

Sigmetrics 2003

Highlights

Router to router traffic matrix is computed instead of PoP to PoP.

Performance evaluation with real traffic matrices.

Tomogravity method (Gravity + Tomography)

Tomogravity

Two step modeling.Gravity Model: Initial solution obtained using

edge link load data and ISP routing policy.

Tomographic Estimation: Initial solution is refined by applying quadratic programming to minimize distance to initial solution subject to tomographic constraints (link counts).

Gravity Modeling

General formula:

Simple gravity model: Try to estimate the amount of traffic between edge links.

Generalized Gravity Model

Four traffic categories Transit Outbound Inbound Internal

Peers: P1, P2, … Access links: a1, a2, ... Peering links: p1,p2,…

Generalized Gravity Model

Generalized Gravity Model

Tomography

Solution should be consistent with the link counts.

Reducing the computational complexity Hundreds of backbone routers, ten

thousands of unknowns. Observations:

Some elements of the BR to BR matrix are empty. (Multiple BRs in each PoP, shortest paths)

Topological equivalence. (Reduce the number of IGP simulations)

Quadratic Programming

Problem Definition:

Use SVD to solve the inverse problem. Use Iterative Proportional Fitting (IPF) to

ensure non-negativity.

Evaluation of Gravity Models

Performance of proposed algorithm

Comparison

Robustness

Measurement errorsx=At+εε=x*N(0,σ)

Questions?