training programme - corghi · the scuola corghi was created in the ‘70s with the aim of training...
TRANSCRIPT
TRAINING
PROGRAMME
The Scuola Corghi was created in the ‘70s with the aim of training professional operators and improving the technical skills of those who use Corghi workshop equipment.
Teaching room for theoretic learning
Scuola Corghi, Via per Carpi n. 9, Correggio
The Scuola Corghi makes use of large spaces where theory and practice are combined.
The courses can be composed by groups of 8 people at the most.
A limited number of participants allows us to obtain more effective, personalised teaching, leaving plenty of time and space for interactive discussions and single test sessions on the equipment.
The present range of Corghi products includes equipment for the:
- tyre mounting and demounting
- wheel balancing
- wheel alignment
- vehicle lifting
- vehicle testing
3
Course
C1
Language:English
Duration:4 days
Training dates:
ON REQUEST
Basic course for beginners or less experienced operators.
Product Lines:- Tyre Changers- Wheel Balancers- Wheel Aligners- Operatori del settore
The course is aimed at:- Technicians- Technical/sales personnel- Sales personnel- End users
Contents of course C1:
Tyre Changers:
- Description of the different types of rims and tyres- General information on the product range- Demounting and mounting procedures- Description of the accessories’ range and their use- Practical exercises
Wheel Balancers:- Basic principles of the balancing technique- General information on the product range- Description of the balancing programs- Presentation of the accessories’ range and their use- Practical exercises
Wheel Aligners:- Wheel alignment theory- General information on the product range- Wheel alignment procedures- Description of the accessories’ range and their use- Practical exercises
Note: Please see the “General conditions valid for all courses” at page 12
4
Course
C2
Advanced course for operators with experience in using the equipment, aimed at giving updates on the new working techniques and on the latest products of the Corghi range.
Language:English
Duration:4 days
Training dates:
ON REQUEST
Note: Please see the “General conditions valid for all courses” at page 12
Product lines:
Mon / Tue : Car Wheel Balancer (EyeLight PLUS)
Wed / Thu / Fri : Wheel Aligner (EXACT Blacktech X PLUS)
NB: the subject of this course may vary as it follows the evolution
of new products’ launch onto the market
The course is aimed at:
- Technicians
- Technical/sales personnel
Contents of course C2:
- Technical/commercial presentation of the new products
- How to chose the product’s model according
to the customer’s needs
- Working procedures
- Practical exercises
- Description of the accessories’ range and their use
- Maintenance and service
5
Advanced course for operators with experience in using the equipment, aimed at giving updates on the new working techniques and on the latest Corghi leverless tyre changer.
Course
C3CODE
Language:English
Duration:2 days
Training dates:
ON REQUEST
Note: Please see the “General conditions valid for all courses” at page 12
Product lines:
The course is aimed at:
- Technicians
- Technical/sales personnel
Contents of course C3-CODE:
- Technical/commercial presentation of the new products
- Working procedures
- Practical exercises
- Description of the accessories’ range and their use
- Maintenance and service
6
Professional course for skilled operators, aimed at supplying a more in-depth knowledge of the products.Linea di prodotto trattata:
Course
C3Product lines:
A. Car Tyre Changer
and Wheel Balancers
B. Truck Tyre Changer
and Wheel Balancers
C. Wheel Aligners
and Lifting Equipment
The course is aimed at:
- Technicians
- Technical/sales personnel
Language:English
Duration:2 days
Training dates:
ON REQUEST
Note: Please see the “General conditions valid for all courses” at page 12
Contents of course C3 (with reference to the single cases A-B-C):
- Basic theoretic elements
- Presentation of the product range
- Working procedures
- Practical exercises
- Description of the accessories’ range and their use
- Maintenance and service practical tests
7
Professional course for skilled operators, aimed at giving the qualification of Trainer for the Bridgestone – Run Flat system “BSR System”
Course
C4
Language:English
Duration:2 days
Training dates:
ON REQUEST
Note: Please see the “General conditions valid for all courses” at page 12
Product lines:
- Tyre Changers
Costs for courses C4:
800,00 per person for training courses at our premises
4.000,00 (total) for training courses to be carried out at the customer’s premises
The course is aimed at:
- Technicians
- Technical/sales personnel
Contents of course C4:
- General information about
Run Flat tyres
- Special demounting
and mounting procedures
- Practical exercises
At the end of the course, in case of a positive evaluation, the participants will receive a Corghi-Bridgestone certificate for the qualification as Trainer BSR TYRE SYSTEM.
8
Course
C5
Language:English
Duration:2 days
Training dates:
ON REQUEST
Note: Please see the “General conditions valid for all courses” at page 12
Professional course for skilled operators and trainers, aimed at giving the qualification of Trainer for mounting/demounting procedure on UHP (low profile) tyres and RUN FLAT (self supporting technology) tyres.
Product lines:
- Tyre Changers
Costs for courses C5:
800,00 per person for training courses at our premises
4.000,00 (total) for training courses to be carried out at the customer’s premises
The course is aimed at:- Technicians- Technical/sales personnel
Contents of course C5:- General information about UHP and Run Flat tyres- Special demounting and mounting procedures- Practical exercises
At the end of the course, in case of a positive evaluation, the participants will receive a Corghi certificate for the qualification as Trainer for Mounting/Dismounting UHP and RUNFLAT TYRE SYSTEM.
2 3
9
Course
C6
Language:English
Duration:1 day
Training dates:
ON REQUEST
Note: Please see the “General conditions valid for all courses” at page 12
Course dedicated to diagnostic tire changer, for beginners and operators with a minimum of experience aimed at providing technical information and updates on the complete diagnosis procedures
Product lines:
- Diagnostic Tyre Changers
The course is aimed at:
- Technicians
- Technical/sales personnel
- end users
Contents of course C6:
- Complete diagnostic procedure simulating the wheel on the road
- Plysteer procedure for measuring conicity and tire drift
- Rim diagnosis and tread depth procedure
- Match mounting procedure and use of the diagnostic roller
- Theory and explanations on wheel deformation terminologies (eccentricity, Plysteer, radial force, lateral force, drift, shimmy)
- Wheel mounting and dismounting procedure
- Practical exercises
10
Course
C7
Language:English
Duration:1 day
Training dates:
ON REQUEST
Note: Please see the “General conditions valid for all courses” at page 12
Course for beginners and operators with a minimum of experience aimed at providing technical information, aligner procedures and updates on R.E.M.O technology
Product Lines:
R.E.M.O Compact 2 and R.E.M.O Rapide precheck
The course is aimed at:
- Technicians
- Technical/sales personnel
- end users
Contents of course C7:
- Theory of characteristic angles
of the alignament
- Procedures and use of R.E.M.O. Compact 2, pre-check R.E.M.O. Rapide and R.E.M.O. 4C
- Use of the Full and Smart databank
- “Electric steering” procedures and adjustment
- Practical exercises
11
Course
C8
Language:English
Duration:1 day
Training dates:
ON REQUEST
Note: Please see the “General conditions valid for all courses” at page 12
Training for beginners and operators with a minimum of experience, aimed at providing technical information and updates on Advanced driver assistance systems (ADAS)
Product lines:
- Equipment for the calibration of ADAS systems. Corghi PROADAS.
The course is aimed at:
- Tire Shop
- Windshield repairers
- Body car shop
- Mechanical Shop
Contents of course C8:
- Theory and presentation of all ADAS systems and their future use
- Adas system calibration procedures
- Wheel alignment pre-check procedures
- Practical Exercises
12
The number of participants for each course is a minimum of 4 and a maximum of 8 (for courses C1 and C2) or 6 (courses C3, C4 and C5).
• Once there are8participants for a course,the enrolment will be closed.
• Iftheminimumnumberof4participantsforeach course is not reached, the course may be cancelled. In this case, the persons concernedwill be duly informed, in order to find the most suitable solution.
• OfficiallanguageisEnglish
• Itisalsopossibletorequestadhoccourses,not officially included in this programme.This is possible if:- subjects other than those programmed are required.- a different language is required (for ex. Spanish, French, German). Any cost for interpreter will be at customer’s charge- the number of participants is minimum 4 operators- a course has already reached the maximum number of participants- the scheduled dates do not meet the needs of the persons concerned*
Also for ad hoc courses, the number of participants will be minimum 4 and maximum 8.Anyone interested can contact the Area Manager for its own country or directly get in touch with the Scuola Corghi as described below.* In thiscase,anadhoccoursewillbeagreedand organized upon request. For this reason the actual carrying out of the course is subject to the final confirmation by the Scuola Corghi.
Practical information for courses to be carried out at the Scuola Corghi’s:• The courses begin at 09.00 at the ScuolaCorghi’s.
• All participants will receive the teachingmaterial relating to the course they are taking part to.
• Attheendofthecourse,incaseofapositiveevaluation, a certificate will be awarded.
• Enrolment for the courses includes thetransfer to/from the Scuola Corghi and the hotel, the light lunch during the training courses. Travel expenses, board & lodging and transfer to/from the hotel and the airport are not included. A list of suggested hotels will be provided to the participants.
• Enrolmentsmustbemadeatleast3/4weeksbefore the beginning of each course, by sending the “Application form for training course” to:
- E-mail to: [email protected]
- Fax to: +39 0522 639923
Practical information for courses to be carried out at the Customer’s premises:
• All participants will receive the teachingmaterial relating to the course they are taking part to.
• Attheendofthecourse,incaseofapositiveevaluation, a certificate will be awarded.
• All expenses are at the customer’s charge.An “all-inclusive” rate will be agreed with the customer before the confirmation of the course.
General conditions valid for all the courses
Note
13
Note
14
Note
15
BY PLANEDistance from the main airports:
Parma airport: 54 KmBologna airport: 60 KmVerona airport: 90 KmMilano Linate airport: 180 KmMilano Malpensa airport: 230 Km
BY TRAINDistance from the main stations:
Reggio Emilia train station: 20 KmCarpi train station: 10 Km
BY CAR
Distance from the main motorway exit:
“Carpi” exit, Motorway A22 / E45: 6 Km
“Carpi” ExitWe are
here
How to contact and reach us
ViaperCarpi,9–S.P.468-42015Correggio(RE)–ItalyTel. +39 0522 634543 Fax +39 0522 639923E-mail: [email protected] Training Centre Manager: Enrico Meschieri
DPC
G000
163F
- 1
1/20
19