tri-color smd led digital ribbon - led and fiber … harry hines blvd dallas, texas 75219 •...

4016 Harry Hines Blvd Dallas, Texas 75219 • 972-650-1855

Tri-Color SMD LED Digital RibbonLED Strip Lighting

Tri-Color SMD LED Digital Ribbon

wdmlighting.com | 2603 Oaklawn Ave. Ste. 120, Dallas, Texas 75219 | 800-893-9787




Description:WDM’s Flexible LED Strips are ideal for edge lighting transparent and diffuse materials. They provide an optimal solution for precise back lighting of complex contours. They are mounted on self-adhesive tape and can be conveniently field-cut. Kit ships complete with a simple con-troller and power supply.

Features:• LED quantity: 300 pcs 5050 SMD LED per

meter• Power: 72 Watts• Input voltage: 12V DC • Waterproof• Cut able every 2 LED• PCB dimensions: 5,000 x 12 mm• Viewing angle: 120 • Lifespan: 50,000 hours

LED Strip Dimensions:




NO SMD RGB OFF

G (Green) Single color fade out &

fade in Color Chasing

Static color selection

Color fade out & fade in

Color Chasing

B (Blue) Single color Color

Chasing

Color fade change Color

Chasing

Color fade out & fade in flash in sequence

R (Red) Color Chasing

Single color fade out &

fade in

Color fade out & fade in

ColorChasing

Light Blue Brightness + (8 in all)

W (White) Slow(8 in all)

Reset Faster (8 in all)

Purple Brightness - (8 in all)

Yellow Left Right


Control Method :

Use the Tri-Color SMD Digital Ribbon IR Remote to control the led controller. The remote has 25 buttons and memory storage.

Button Function:The function of each button as the table below :

Direction: When switching to modes, the buttons of “brightness +” & “brightness -” are use to increase or decrease the LED Strip bright-ness.


Controller Manual




Operation Manual

yellow Left Right

3 Panel specification and connecting drawing as follows:

4 Warning:

1.Supply voltage of this product is DC 12V ; Never connect to others

2.Lead wire should be connected correctly according to colors that connecting diagram offers;

Direction: When switching to modes ,the buttons of "brightness + "& "brihteness -" use to increasedecrease the LED Strip brightness. There are 7 step in all.

100-240v AC to 12v DC Power Supply Led Transformer

WARning S:

1. Supply voltage of this product is DC 12V. Never connect to others.

2. Lead wire should be connected correctly according to colors that connecting diagram offers.

1) CE, GS, TUV, UL APPROVED

2) 4A (4000 MA) POWER OUTPUT (72 WATTS)

3) 12V DC

4) 1.5 METER TRANSFORMER CABLE - PLUS 1.5 METER MAIN CABLE (3.0M TOTAL)

5) INCLUDES ORIGINAL END CONNECTOR


tri-color smd led digital ribbon - led and fiber … harry hines blvd dallas, texas 75219 •...

Documents