tritec light steel panel formwork
TRANSCRIPT
TRITEC® lightSteel Panel Formwork
Perfectionmade in Germany
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 1
Various practical illustrations of TRITEC® Panel Combinations
Guaranteed the largest possible range of sizes withthe least possible amount of panels
Reduced storage space on building sites
Increased amount of castings per element,Various combinations reducing costs
Reduced costs for through varied combinationsfor every ground plan
Easy and practical stacking of panels for storage or transport
Easy and effective solutions for slanted panels at various heights, wall offsets, length adjustments,corners...etc.
2
Tritec_light_170310 engl Einklapper zb.qxd:1te 17.03.2010 11:13 Uhr Seite 2
1
3
6
78
9
Can be moved without the use of any cranes – the panels can be moved by hand due to their light weight
The formwork system with only one formwork clamp - Alignment Panel Coupler APC
Compatible with the TRITEC® Formwork System (80KN)
Multi-purpose and versatile
Ideal panel formwork for reinforced concrete wallsSystem with 4 different panel heights and widths
Well-defined grids for various wall lengths
Vibration resistant and aligned at connection jointswith the Alignment Panel Coupler APC
Used with few additional parts for quick and easy handling with minimum storage needed
Developed, produced and tested according toGerman standards
3
2
Design and Features (Properties) of the TRITEC® light-System
Tritec_light_170310 engl Einklapper zb.qxd:1te 17.03.2010 11:13 Uhr Seite 3
5
10
11
12
4
4
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 4
System Overview
Formwork Clamp APC, Art.-No. 0600401
Formwork Clamp APC light, Art.-No. 0600412
Scaffolding Bracket TTW 80, Art.-No. 0600103
Scaffolding Bracket TTW 120, Art.-No. 0600114
Compensation Waler TTR85, Art.No. 0600305
Tie Rod (Available in all lengths)6
Base Plate PPS, painted, Art. No. 0600917
Push Pull Props (Available in 3 sizes)8
Prop Connector TT, Art. No. 0600609
Wing Nut Plate DW15, Art. No. 06010010
Compensation Waler TTR85, Art.No. 06003011
Stop End Tie light, Art. No. 06002112
5
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 5
Steel Panel Formwork TRITEC® light The System
6
Walls
Columns Foundations
WALLS, COLUMNS, FOUNDATIONS – ALL FORMED WITH ONE UNIVERSAL SYSTEM.
TRITEC® LIGHT – THE ALL-PURPOSE SYSTEM FOR MANY APPLICATIONS SUCH AS:
Wall formwork
Foundations
Column Formwork
Shaft Formwork
Beam Formwork
Stop-end shuttering
Wall conjunctions
Inner Corners 75°-285°
Outer Corners
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 6
ROBUST AND SOLID
The formwork panel frame consists of special closed steel profiles combined with 18 mm cross-bonded Birch plywood. Your choice of any other plywood is possible.
EASY TO HANDLE
Due to the significantly small amount of components used, searching for many little components is unnecessary, storage is easy and delays on site are reduced to a minimum.
TRITEC® light-Panels
7
MATERIAL SUITABLE FORTHE CONSTRUCTION SITE
The steel panel frames have a profile height of 120 cm anda width of 60 mm. The Alignment Panel Coupler APC fitsonto the corrugated edge without any difficulty.The frame is sturdy and the powder-coated surface is easilycleaned. The guard cover at panel top-ends protects theplywood against damage.
The 18 mm film coated plywood consists of Birch veneer andis made to meet high demands. Cross-bonded and glued according to BFU 100 with a Phenol resin coating 220 g/m².
Panels are available in 4 heights and 4 widths.
Associated system accessories such as the Push-Pull Props, Walers,Walkway Brackets can be fastened to the integrated track.Corners are stiffened with steel plates.
THE SYSTEM TRITEC® LIGHT
Consists of 4 panel widths
Only one formwork clamp
Superb weight to strength ratio up to 60kN/m²
Multi-bonded Birch plywood, 220 g
Longevity
SERVICES
Trade-in
Financing
Application technique
Logistics
90 cm
72 cm
60 cm
30 cm
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 7
8
Panels 300: Height Width Weight Article
TRITEC®-light Panel 300 cm 90 cm 105,04 kg 050050
TRITEC®-light Panel 300 cm 72 cm 89,49 kg 050080
TRITEC®-light Panel 300 cm 60 cm 80,18 kg 050060
TRITEC®-light Panel 300 cm 30 cm 55,56 kg 050070
Panels 270: Height Width Weight Article
TRITEC®-light Panel 270 cm 90 cm 95,84 kg 050220
TRITEC®-light Panel 270 cm 72 cm 81,48 kg 050230
TRITEC®-light Panel 270 cm 60 cm 72,94 kg 050240
TRITEC®-light Panel 270 cm 30 cm 50,32 kg 050250
Panels 150: Height Width Weight Article
TRITEC®-light Panel 150 cm 90 cm 59,30 kg 050320
TRITEC®-light Panel 150 cm 72 cm 49,80 kg 050330
TRITEC®-light Panel 150 cm 60 cm 44,50 kg 050340
TRITEC®-light Panel 150 cm 30 cm 29,60 kg 050350
Panels 120: Height Width Weight Article
TRITEC®-light Panel 120 cm 90 cm 50,10 kg 050420
TRITEC®-light Panel 120 cm 72 cm 41,80 kg 050430
TRITEC®-light Panel 120 cm 60 cm 37,32 kg 050440
TRITEC®-light Panel 120 cm 30 cm 24,42 kg 050450
All panels are also available as hot-dip galvanised-version.
TRITEC® light-Panels
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 8
INNER CORNER PANELS 90°
Used to form 90° angles on inner corners of the concrete wall
Powder-coated panels
Corner Panels
ARTICULATED CORNER
For use in the case of oblique angles from 75°-285°, internally and externally
Hinged corner panels can be made 30 cm panels
Height Width/Side Weight Article
TRITEC® light Inner Corner 300 300 cm 30 cm 86,14 kg 050093
TRITEC® light Inner Corner 270 270 cm 30 cm 78,50 kg 030070
TRITEC® light Inner Corner 150 150 cm 30 cm 44,90 kg 050370
TRITEC® light Inner Corner 120 120 cm 30 cm 36,70 kg 040070
Height Width/Side Weight Article
TRITEC® light Articulated Corner 300 300 cm 30 cm 90,40 kg 050095
TRITEC® light Articulated Corner 270 270 cm 30 cm 81,80 kg 030090
TRITEC® light Articulated Corner 150 150 cm 30 cm 47,10 kg 050390
TRITEC® light Articulated Corner 120 120 cm 30 cm 38,20 kg 040090
9
Height Width/Side Weight Article
TRITEC® light Shaft Panel 300 300 cm 30 cm 130,00 kg 010095
TRITEC® light Shaft Panel 270 270 cm 30 cm 120,00 kg 030095
TRITEC® light Shaft Panel 150 150 cm 30 cm 92,00 kg 080095
TRITEC® light Shaft Panel 120 120 cm 30 cm 72,50 kg 040095
SHAFT PANEL
Used for forming lift shafts from the inside and manholes
By means of a spindle, each leg of the corners contracts by 30 mmand the shaft unit can be easily stripped and lifted
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 9
TRITEC® light-Accessories
COMPENSATION WALER TTR85,ART. NO. 060030
Universally operational waler made of high-quality steel
Bridges length extensions
Increases rigidity of inter-panel connections
Transfers tie forces
The walers are fixed to the struts on the panels by means of its attached couplers which cannot be lost. The necessary functional holes have been integrated in the vertical and horizontal struts on the steel frame.
High-quality powder-coating
FORMWORK CLAMP APC, ART.-NO. 060040
For the attachment of light outer cornersor wall offsets up to 10 cm
to connect the TRITEC® light elementswith TRITEC® elements
ALIGNMENT PANEL CLAMPS APC:
Tightly fastens, aligns and makes panels flush with each other.
FORMWORK CLAMP APC LIGHT, ART.-NO. 060041
Connects all light-panels easily and cost-efficiently
10
STOP-END-TIE, ART.-NO. 060021
To take the forces on the stop-end shuttering panels
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 10
11
TRITEC® light-Accessories
LIFTING HOOK LIGHT, ART. NO. 060171
To transport the vertically hanging panels
Certified carrying Load: 900 kg
galvanised
WALKWAY BRACKET TTW 80,ART. NO. 060010
For the assembly of a secure,80 cm wide working platform
Easily mounted to the verticalor horizontal struts
High-quality powder-coating
WALKWAY BRACKET TTW 120, ART. NO. 060011
For the assembly of a secure,120 cm wide working platform
Easily mounted to the verticalor horizontal struts
High-quality powder-coating
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 11
12
PUSH-PULL PROPS
Aids in erection
Allows the simple alignment and adjustment of wall and column formwork Absorbs wind forces
High-quality powder-coating
PANEL ERECTION WITH PUSH-PULL PROP PPS:
TRITEC® light-Accessories
Typ Extension Range Article Weight
PPS I 2,05 to 2,95 m 060140 18,00 kg
PPS II 2,91 to 3,80 m 060070 22,10 kg
PPS III 4,60 to 6,00 m 060150 38,80 kg
Kicker PPS I 1,08 to 1,40 m 060160 5,20 kg
Kicker PPS II 1,28 to 1,90 m 060080 13,10 kg
Kicker PPS III 2,05 to 2,94 m 060180 17,00 kg
Adjustment with Push Pull Prop andProp Connector (Art. No. 060060)
Adjustment by means ofPush Pull Props
Kicker PPS I Kicker PPS IIKicker PPS III
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 12
13
TIE RODS DW 15
Supplied in four standard lengths,additional lengths are available upon request
Max. Permissible load of the Tie RodDW 15 and DW 20, are accordingto DIN 18216
TRITEC® light-Accessories
WING NUT PLATE DW 15
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 13
14
ECONOMIC DESIGN:
Column Formwork
Outer Corners
Stop-end shuttering
Wall connections
TRITEC® light Flex-Panels TTF
Height Width Weight Article
TRITEC® light-TTF-Panel 300 cm 72 cm 96,00 kg 050097
TRITEC® light-TTF-Panel 270 cm 72 cm 87,43 kg 050260
TRITEC® light-TTF-Panel 150 cm 72 cm 54,18 kg 050360
TRITEC® light-TTF-Panel 120 cm 72 cm 46,25 kg 050460
TRITEC® LIGHT TTF-PANELS IN USE AS MULTI-PANELS
A Multi Panel with pre-drilled holes and a 3-hole grid at anchor level, can be delivered in any height.
ECONOMIC DESIGN
Outer corners
Stopends
Wall connections
Wall connections
Outer corner
Stopends
Stop-End-Tie Light
TTF-Panels
Only one panel for different usages. This minimizes the amount of different parts and allows mobility and fast assembly of panels.
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 14
15
Detail of fixing the TTF-Panelswith column tie bolt
Examples
TRITEC® LIGHT TTF-PANELS USED FOR COLUMN FORMWORK
Lateral holes are drilled (when used as column formwork for cross sections with 50 mm increments)
adjustable from 200x200 to 600x600 mm
The panels are connected together by means of Tie Bolts and Wing Nut Pivot Plates.Unnecessary tie holes are sealed off with plugs.
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 15
TRITEC® light-Foundations
Foundations can be formed with panel heights of 120 and 150 with TRITEC® light.
16
Top tie bracket Foundation tie clamp tls
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 16
17
Special sizes, choice of color and plywood
All TRITEC® light elements can be custom made any special size upon request. For example GHI can make all TRITEC® light elements to suit the colours in your logo powder coated and without extra charge! Select all standard RAL colours. Galvanized casing is available at an additional cost.
You have the choice of four different plywood-versions. For a small fee you can get the panels with plastic coated plywood, with plastic board or with Sonoboard instead of the cross-bonded birch plywood.
TRITEC® light colors
TRITEC® light galvanised
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 17
PLANNING · LOGISTICS · SERVICE
Prompt quotations and comprehensive advice
CAD planning, production of formwork plans
Swift, on-time, reliable delivery - worldwide
We take complete charge of logistics and storage
Training and instructions to your personnel on site
Cleaning, maintenance and repairs using new original parts
Contact/Manufacturer
Tritec_light_160310 englisch zb .qxd:1te 17.03.2010 11:11 Uhr Seite 18