truss modeling of reinforced concrete shear-flexure behavior
TRANSCRIPT
ISSN 1520-295X
Truss Modeling of Reinforced ConcreteShear-Flexure Behavior
by
Jang Hoon Kim and John B. ManderUniversity at Buffalo, State University of New York
Department of Civil, Structural and Environmental EngineeringKetter Hall
Buffalo, New York 14260-4300
Technical Report MCEER-99-0005
March 8, 1999
This research was conducted at the University at Buffalo, State University of New York and wassupported by the Federal Highway Administration under contract number DTFH61-92-C-00106.
NOTICEThis report was prepared by the University at Buffalo, State University of NewYork as a result of research sponsored by the Multidisciplinary Center for Earth-quake Engineering Research (MCEER) through a contract from the Federal High-way Administration. Neither MCEER, associates of MCEER, its sponsors, Univer-sity at Buffalo, State University of New York, nor any person acting on their behalf:
a. makes any warranty, express or implied, with respect to the use of any infor-mation, apparatus, method, or process disclosed in this report or that such usemay not infringe upon privately owned rights; or
b. assumes any liabilities of whatsoever kind with respect to the use of, or thedamage resulting from the use of, any information, apparatus, method, or pro-cess disclosed in this report.
Any opinions, findings, and conclusions or recommendations expressed in thispublication are those of the author(s) and do not necessarily reflect the views ofMCEER or the Federal Highway Administration.
University at Buffalo The State University of New York
ISSN 1520-295X