ts transportpackaging 2011 -...
TRANSCRIPT
Technical Coatings
General Information Cost Saving Consultancy
Mondi Coatings & Consumer Packaging GmbH
Kelsenstrasse 7
1032 Vienna, Austria
Tel: +43 (0)1 79013 4981
Fax: +43 (0)1 79013 945
Email: [email protected]
www.mondigroup.com
Technical Coatings
www.mondigroup.com
SOLUTIONS. FOR YOUR SUCCESS.
Transport Packaging
Cost Saving Consultancy - Business Case
Edge Crush Test (ECT) reduction in untreated corrugated board due to moisture penetration and migration (15.1 %)
Box Compression Test (BCT) in box made from untreated corrugated board with reduced Edge Crush Test value during lifecycle (14.2 %)
Total corrugated board material cost reduction due to weight and material cost reduction (19 %)
Our guiding principle is to create customer value in everything we do. Mondi Coatings & Consumer Packaging’ tailor-made packaging solutions are especially well-suited to meet the demanding requirements of the transport packaging industry!
Paratén® solution
Paratén® white top testliner 205 gsm
WS C fl ute 1.44 x 115 165 gsm
WS fl ute 115 gsm
WS B fl ute 1.33 x 115 152 gsm
Testliner 150 gsm
TOTAL 787 gsm
Original box composition
White top kraftliner 200 gsm
SC C fl ute 1.44 x 112 160 gsm
Kraftliner 200 gsm
SC B fl ute 1.33 x 112 148 gsm
Kraftliner 200 gsm
TOTAL 908 gsm
© M
ond
i Coa
tings
& C
onsu
mer
Pac
kagi
ng G
mb
H, M
arch
201
1, p
rinte
d o
n C
olor
Cop
y 25
0 gs
m
Packaging Excellence
Mondi Coatings & Consumer Packaging offers a wide range of barrier liner solutions for the corrugated industry with the following key advantages:
• Protection of packed goods from moisture, grease, odours, aroma, oxygen, gas diffusion and mechanical stress
• Protection of the box against moisture penetration due to surrounding humidity
• Protection of the box against moisture migration from the packed goods when the contents are moist, wet or greasy
• Excellent printability• Raw material savings
Our barrier liners are produced on the basis of recycled or virgin fi bre containerboard polymer-laminated with 100% wood pulp kraft papers or other sophisticated substrates such as antistatic fi lms, non-woven, tissue, etc.
Depending on the customers’ needs, all barrier liners are available with either a white or a brown appearance. The entire barrier liner range is fully recyclable according to RESY® standards.
Raw Material Savings
When corrugated board is exposed to humidity, the mois-ture can easily penetrate and migrate into the individual paper substrates of the corrugated board sheet.
Moisture migration into all liner and fl uting substrates of a box construction can cause a reduction in stiffness (RCT) resulting in lower total strength of the board sheet (ECT), which may in turn reduce the compression strength of the box (BCT).
Our barrier liner solutions Paratén® and Paratherm® prevent moisture migration. This ensures the box keeps its mechanical strength properties, and means paper substrate weight and quality can be downgraded.
www.mondigroup.com www.mondigroup.com
Technical Coatings
General Information Cost Saving Consultancy
Transport Packaging - CCM
*
Product Portfolio Transport Packaging - CCM
Paratén®* is a barrier liner produced on the basis of either virgin or recycled fi bres, depending on the required properties of the packaging construction. The product has a pure fi bre surface and can be supplied with a brown, white or mottled white appearance.
MG kraft paper(100% wood pulp)LDPEcontainerboard
Paratherm®* is a special barrier liner product with a heat-resistant surface, allowing high temperatures in board production and con-version, as well as in packaging applications. The product is available with either a brown or a white appearance.
PET fi lmLDPEcontainerboard
Parafresh®* is specially designed for appli-cations in modifi ed/controlled atmosphere packaging. It has specifi c gas and fl avour barrier properties.
MG kraft paper(100% wood pulp)gas tight PEcontainerboard
Parasoft®* is specially designed for the expensive and scratch sensitive product segment.
tissue paper, non wovenLDPErecycled containerboard
Parastat®* is specially designed for high-quality electro static discharge applications, complying with IEC 61340-5-1 Edition 1, 2007-08 and IEC/TR 61340-5-2 Edition 1, 2007-08.
ESD fi lmLDPErecycled containerboard
*
Paraprint®* is a cost-effective solution in which optimum barrier properties and excel-lent printing results are combined in a single substrate. It is developed for packaging, de-signed with mini- and microfl ute used for con-sumer-related and shelf-ready packaging.
1-side coated paperLD/HD white PErecycled containerboard
Par
athe
rm®
*P
arat
én®
*P
araf
resh
®*
Par
aso
ft®
*P
aras
tat®
*P
arap
rint
®*
Compression of 250 mm high boxes:
Water Vapour Transmission Rate (WVTR)