ImplantSystemTS

SEM (Scanning Electron Microscope) Imaging

SASurface

RBM

SA‘S’Co.SA

SA: Sand blasted with alumina

and Acid-etched surface.• Optimal morphology: combination of craters and micro-pits.

• Optimal surface roughness: Ra 2.5~3.0µm.• Early cell response: 20% faster than RBM.• Early bone healing: 20% faster than RBM.• Early loading can be done after 6 weeks of placement.

Osstem SA and ‘S’ surfacemorphology and roughnessincreased by 45% comparedto RBM treatment.

x4K

x2K

x2K x2K

2

x4K

x4K

SA Surface to

enhance biological

healing

Manufactured

using Grade C4

pure Titanium

Morse taper

and internal hex

connection

Self tapping

and aggressive

threads

Platform Switching

for preserving bone

The TSIII SA implant has been developed with the mostadvanced research and devlopment by Osstem Implant. This is the ultimate implant for any case, as it uses a simplesurgical procedure. The featured SA surface allows for quickosseointegration, promoting a quicker healing time.The optimal design gains high initial stability in any bonedensity. Its vast range of sizes makes it the perfect implantfor any patient.

3

TSIIISA

Tapereddesign toprovideexcellentmechanicalstability

Ø3.0 L 8.5 10 11.5 13 Hex 2.1

Product Code TS3M3008S TS3M3010S TS3M3011S TS3M3013S

Ø3.5 L 8.5 10 11.5 13 Hex 2.1

Product Code TS3M3508S TS3M3510S TS3M3511S TS3M3513S

Ø4.0 L 7 8.5 10 11.5 13 Hex 2.5

Product Code TS3S4007S TS3S4008S TS3S4010S TS3S4011S TS3S4013S

Ø4.5 L 7 8.5 10 11.5 13 Hex 2.5

Product Code TS3S4507S TS3S4508S TS3S4510S TS3S4511S TS3S4513S

M

M

M

R

R

TSIIISA

The TSIII SA fixture has two types of abutment connectionsfor a simple restorative procedure. A Mini Connection is usedfor the Ø3.0 and Ø3.5 implants. All other implants (Ø4.0,Ø4.5, Ø5.0, Ø6.0 and Ø7.0) use Regular Connections. TheMini Connections are highlighted yellow below. In contrast,the Regular Connection can be used with the same abutmentfor fixtures 4.0 and wider, regardless of the diameter of theabutment. These are highlighted green below.

Mini:Ø3.0

Ø3.5

Diagrams not to scale.

R

Regular:Ø4.0

Ø4.5

Ø5.0

Ø5.5

NEW

Hex 2.1

Ø2.8

2.8

5.5

8.0

Hex 2.5

Ø3.35

2.8

6.5

4

Ø6.0 L 6 7 8.5 10 11.5 13 Hex 2.5

Product Code TS3S6006S TS3S6007S TS3S6008S TS3S6010S TS3S6011S TS3S6013S

Ø7.0 L 6 7 8.5 10 11.5 13 Hex 2.5

Product Code TS3S7006S TS3S7007S TS3S7008S TS3S7010S TS3S7011S TS3S7013S

Ø5.0 L 6 7 8.5 10 11.5 13 Hex 2.5

Product Code TS3S5006S TS3S5007S TS3S5008S TS3S5010S TS3S5011S TS3S5013S

Ø5.5 L 6 7 8.5 10 11.5 13 Hex 2.5

Product Code TS3S5506S TS3S5507S TS3S5508S TS3S5510S TS3S5511S TS3S5513S

R

R

R

R

TSIII Ultra-wide

Diagrams not to scale.

Fixture only:Fixture product code (example : TS3S6010S)

Pre-Mounted Fixture (Simple mount) M + Fixture product code (example : MTS3S6010S)

Hex Ø 1.2

L

D

Hex Ø 1.2

5

TSIVSA

The implant thatspecially performsin the weaker bone

Small Thread:

Increased

initial stability

in soft bone

Corkscrew

Thread:

Helical

cutting

edge

Sharp and

rounded apex

6

Sand-blasted

acid etching

Increasedtaper forimprovedinitialstability

Ø 4.0 : 0.8Ø 4.5 : 1.0Ø 5.0 : 1.2

Fixture only:Fixture product code (example : TS3S6010S)

Pre-Mounted Fixture (Simple mount) M + Fixture product code (example : MTS3S6010S)

• Increased taper for improved initial stability.• High success rate, even with poor bone quality.• Specially developed for maxilla and soft bones.• Improved initial stability with application of helicalcutting, corkscrew thread and sharp rounded apex, allowing the implant to be placed with minimal drilling.

• Submerged-type implant with morse taperedinternal hex connection.

• Excellent self-tapping ability.• Recommended insertion torque: below 40Ncm.

Ø4.0 L 7 8.5 10 11.5 13 Hex 2.5 Pitch 0.8

Product Code TS4S4007S TS4S4008S TS4S4010S TS4S4011S TS4S4013S

Ø4.5 L 7 8.5 10 11.5 13 Hex 2.5 Pitch 1.0

Product Code TS4S4507S TS4S4508S TS4S4510S TS4S4511S TS4S4513S

Ø5.0 L 7 8.5 10 11.5 13 Hex 2.5 Pitch 1.2

Product Code TS4S5007S TS4S5008S TS4S5010S TS4S5011S TS4S5013S

R

R

R

Diagrams not to scale.

7

L

D

Hex Ø 1.2

Ampoule user guideApplying: grip type ampoule to protect TSIII SA surface.

1. Remove the back of theblister (sterilised conditionis not guaranteed once theblister is removed).

2. Remove the capsuleby rotating.

3. Connect driver - clickswhen properly connected.

4. Remove implantfrom grip holding

TS Packaging

Mini: Yellow Regular: Green

OSSTEM UK 15-17 The Crescent, Leatherhead, Surrey KT22 8DYT: 01372 383 172 E: info@osstemuk.com www.osstemuk.com

122 TAPER KIT

8

Available for use: TSIII SSIII USIII

Base Components:

TS NoMountDriver

TSNMDMLTSNMDRL

SS NoMountDriver

SSNMDS

TorqueExtension

OTE

SS FixtureDriver

SSRFDL

TS FixtureDriver

GSMFDLGSRFDL

DrillExtension

ODE

TaperParallel Pin

APP3522: 2ea

APP2227: 2ea

122Parallel Pin

HandDriver

AHD12SHAHD12LH

Torque WrenchTW30B

Depth GaugeOSDG

TorqueDriver

TRHD12STRHD12L

SimpleMountDriver

ASMDSASMDL

SimpleMount

Extension

ASMESASMEL

RemovalTool

ERFMERFR

Ø2.2Twist Drill

2D2207LC012D2208LC012D2210LC012D2211LC012D2213LC01

Guide Drill

OGD2027L

122TPD3507122TPD3508122TPD3510122TPD3511122TPD3513

F3.5Twist Drill

3D2718FNLC3D2715FNLC01

Ø2.7Twist Drill

122TPD4007122TPD4008122TPD4010122TPD4011122TPD4013

F4.0Twist Drill

122TPD5007122TPD5008122TPD5010122TPD5011122TPD5013

F5.0Twist Drill

122TPD4507122TPD4508122TPD4510122TPD4511122TPD4513

F4.5Twist Drill

122TPD5507122TPD5508122TPD5510122TPD5511122TPD5513

F5.5Twist Drill

From Osstem