Tubie Tote ‘n CartBasic Model

Tools Needed:

Materials Needed:

Hacksaw or PVC CutterDrill & Small Drill Bit

(1) 5’ piece of ¾” PVC(4) ¾” PVC Tee(1) ½” PVC Trap to fit inside the ¾” Tee(1) ¾” PVC Male Adapter (Slip x Thread)(1) 1” x ¾” Snap Tee(1) Screw-in Hook

(pic A)

Patchwork Peddler www.PatchworkPeddler.comPage 1

Tubie Tote ‘n CartBasic Model

Cut your PVC into:

Directions:

(1) 12.5” Piece [Trunk Piece](4) 3.5” Pieces [Feet](2) 2.5” Pieces [Branches](1) 2” Piece [for Adapter]

1- Place your Feet into the Tops & Bottoms of (2) of the Tees(pic B)

2- Insert both Branches into the side of those same Tees (pic C)3- Place your Trunk into the side of the 3rd Tee (pic D)4- Slide your Branch ends into the sides of your Trunk Teeto create your Base. (pic E)

5- Drill a hole just slightly smaller than the shaft of your Hookinto the flat side of your final Tee and screw in hook. (pic F)

6- Assemble your Top Section by:+Inserting the 2” piece to one end of your final Tee+Place your Threaded Adapter onto the 2” piece+Screw on your Snap Tee to the Threaded Adapter+Place your PVC Trap on the opposite end(Your Top Assembly should now look like pic G)

7- Place your Top Assembly onto the top of your Base (pic H)

Patchwork Peddler www.PatchworkPeddler.comPage 2

(pic B)

(pic C)(pic D)

(pic E)

(pic F) (pic G)

COMPLETED(pic H)

Tubie Tote ‘n CartBasic Model

Snap Tee

ThreadedAdapter

Trap

Patchwork Peddler www.PatchworkPeddler.comPage 3

Patchwork Peddler www.PatchworkPeddler.comPage 4

Tubie Tote ‘n CartBasic Model

We really hope that our tutorial and instructionshave made life easier for you. Let us know if youcame up with a new style or an accessory thathelps you. We’ll be more than glad to share it

with the Tubie community so that others can mayfind it useful as well.

We know that not everyone will be able tomake this Tubie Cart {Basic}, so we havelisted this Assembly for sale on our website.

All you would have to do is put it together whenyou get it.

Patchwork PeddlerPO Box 290

Crossville TN 38557Toll Free: (866) 728-5709

www.PatchworkPeddler.com