tuff-cast insulated metal wall panel

1
TUFF-CAST INSULATED METAL WALL PANEL METL-SPAN INSULATED METAL PANELS Metl-Span’s new Tuff-Cast is an exceptionally attractive insulated metal wall panel with the look of finished precast concrete. The exterior surface of the panel is a hard aggregated fiber reinforced polymer coating created with the factory applied Tuff Cote ® finish system. Tuff Cote finish offers an extremely durable impact and abrasion resistant coating that withstands severe weather conditions. Unlike field-applied finishes that are vulnerable to damp or cold weather during installation, Tuff-Cast panels can be erected in virtually any weather condition. The interior face of the Tuff-Cast panel is finished with an attractive Mesa profile and painted with a white polyester coating. • The look of finished precast concrete with the efficiency of an insulated metal panel • The field-tested and proven Tuff Cote technology • A durable finish that is highly resistant to impact and abrasion • A 10-year limited warranty Exterior Profile: No profile with Tuff Cote ® finish system Interior Profile: Mesa nominal 1 /8" deep; Light Mesa nominal 1 /16" deep, Light Mesa not available for 5- or 6-inch thick panels Panel Core: Foamed-in-place, Non-CFC & zero ODP polyurethane, FM Class 1 approval Thermal Values: K-factor, Btu in/ft 2 hr. °F @ 75°F (24°C) mean core temperature = 0.140. K-factor, Btu in/ft 2 hr. °F @ 40°F (4°C) mean core temperature = 0.126 Module Width: 36", 42" Panel Thickness: 2",2 1 /2",3",4",5",6" Panel Lengths: 8'-0" to 40'-0" Exterior Facings: Stucco embossed, G-90 galvanized and/ or AZ-50 aluminum-zinc coated steel in 24 Ga. and 22 Ga. with factory applied Tuff Cote finish system Exterior Texture: Tuff Cote finish system - a hard aggregated fiber reinforced polymer coating Interior Facings: Stucco embossed, G-90 galvanized and /or AZ-50 aluminum-zinc coated steel in 26 Ga., 24 Ga. and 22 Ga. Panel Joint: Offset double tongue and groove with extended metal shelf for positive face fastening Fastening: Fastener and Clip concealed in the side joint FM Approved Class 1 with no height restrictions. TUFF-CAST INSULATED METAL WALL PANEL FEATURES Available Colors: Medium Beige, Antique Bronze, Surrey Beige, Warm Limestone, Light Stone, Light Gray and Stucco White COLORS © 2012 Metl-Span - A Division of NCI Group, Inc. All rights reserved. Printed in the U.S.A. METL-12-019-2-04 METL-SPAN: Pioneering Insulated Metal Panel Technology 1720 Lakepointe Drive, Suite #101, Lewisville, Texas 75057 • 877.585.9969 • FAX: 972.420.9382 metlspan.com Visit our website or call us today for a free architectural catalog and CAD CD-ROM.

Upload: others

Post on 04-Feb-2022

6 views

Category:

Documents


0 download

TRANSCRIPT

TUFF-CasT™ INsULaTED METaL WaLL PaNELMETL-SPAN iNSuLATEd METAL PANELS

Metl-Span’s new Tuff-Cast™ is an exceptionally

attractive insulated metal wall panel with the

look of finished precast concrete. The exterior

surface of the panel is a hard aggregated fiber

reinforced polymer coating created with the

factory applied Tuff Cote® finish system. Tuff

Cote finish offers an extremely durable impact

and abrasion resistant coating that withstands

severe weather conditions.

unlike field-applied finishes that are vulnerable

to damp or cold weather during installation,

Tuff-Cast panels can be erected in virtually

any weather condition. The interior face of the

Tuff-Cast panel is finished with an attractive Mesa profile and painted with a white polyester coating.

•Thelookoffinishedprecastconcretewiththe efficiencyofaninsulatedmetalpanel

• Thefield-testedandprovenTuffCotetechnology

• Adurablefinishthatishighlyresistanttoimpact andabrasion

• A10-yearlimitedwarranty

Exterior Profile:NoprofilewithTuffCote®finishsystem

Interior Profile: Mesanominal1/8"deep;LightMesanominal1/16"deep,Light Mesa not available for 5- or 6-inch thick panels

Panel Core: Foamed-in-place,Non-CFC&zeroODPpolyurethane,FMClass1approval

Thermal Values: K-factor,Btuin/ft2 hr.°F@75°F(24°C)meancoretemperature=0.140.K-factor,Btuin/ft2 hr.°F@40°F(4°C)meancoretemperature=0.126

Module Width: 36", 42"

Panel Thickness: 2",21/2",3",4",5",6"

Panel Lengths: 8'-0"to40'-0"

Exterior Facings: Stuccoembossed,G-90galvanizedand/orAZ-50aluminum-zinccoatedsteelin24Ga.and22Ga.withfactoryappliedTuffCotefinishsystem

Exterior Texture: TuffCotefinishsystem-ahardaggregatedfiberreinforcedpolymercoating

Interior Facings: Stuccoembossed,G-90galvanizedand/orAZ-50aluminum-zinccoatedsteelin26Ga.,24Ga.and22Ga.

Panel Joint: Offsetdoubletongueandgroovewithextendedmetalshelfforpositivefacefastening

Fastening: FastenerandClipconcealedinthesidejoint

FMApprovedClass1withnoheightrestrictions.

TUFF-CasT INsULaTED METaL WaLL PaNEL FEaTUREs

Available Colors: MediumBeige,AntiqueBronze,SurreyBeige,WarmLimestone,LightStone,LightGrayandStuccoWhite

CoLoRs

© 2012 Metl-Span - A Division of NCI Group, Inc. All rights reserved. Printed in the U.S.A. METL-12-019-2-04

METL-sPaN: Pioneering insulated Metal Panel Technology

1720 Lakepointe Drive, Suite #101, Lewisville, Texas 75057 • 877.585.9969 • FAX: 972.420.9382metlspan.com • Visit our website or call us today for a free architectural catalog and CAd Cd-ROM.