tune your sails for outright · rev. q08 *** crew weight: 450 lbs vx one tensions & bend wind...
TRANSCRIPT
VX One Tuning Guide Rev. Q08
TUNE YOUR SAILS FOR OUTRIGHT SPEED
2
VX One Tuning Guide
Thank you for choosing North Sails for your VX One. We hope using this simple guide will help you get the most from your new North Sails. Please feel free to call us if you have any questions.
Mast Setup
STEP POSITION
Pin 3rd hole from aft end - Make sure you are in compliance with class rule: C,9.5
Use a PT1 Loos tension Gauge to check tensions on the Cap shrouds and intermediates
TO DETERMINE THE CHECKSTAY SETTING:
Measure 2’ up the intermediate, then over to the check at 90deg to the intermediate. Check how far away 1 finger pressure can pull the check and then how close. This difference is the measurement of slack in the intermediate. See pictures below:
For any questions you may have, contact our VX One experts:
Ched Proctor 203-783-4239 [email protected]
Zeke Horowitz 203-783-4241 [email protected]
Chris Snow 619-226-1415 [email protected]
VX ONEQuick Tuning Chart
Rev. Q08
*** CREW WEIGHT: 450 lbs
VX ONE TENSIONS & BEND
WIND SPEED
KnotsCAPS
# OF
TURNS
from base
YOUR TURNS
INTER-MEDIATE
# OF
TURNS
from base
YOUR TURNS
CHECKSTAY
# OF
TURNS
from base
YOUR TURNS
HEADSTAY PRE-BEND
0-8 knots 20 -3 10 0 3” 0 13 1 -1/4”
8-10 knots 25 BASE 15 BASE 1” 19 1-3/4”
10-12 28 2 19 0 7 0 22 2-1/8”
12-14 30 4 27 1 3 0 27 2-1/8”
14 - 22 34 9 32 + 3 7 0 31 2-1/2”
22+ 37 15 34 3 19 0 35 3-1/4”
ANGLE CAR POSITION
SHEETING ANGLE DISTANCE FROM CENTERLINE (mm)
5 dregrees 193
Sweet spot 260
7.5 degrees 290
10 degrees 386