tuscan villa...tuscan villa 12x12 12x24 30x30 30x60 1.5 8mm pressed 9mm pressed 1 these values may...
TRANSCRIPT
Tuscany is the Italy of your dreams. Ancient farmhouses built around cobblestone courtyards overlook sun-drenched valleys of lavender and cypress trees. Olive orchards dot the landscape and the view from every summit is sublime. The beauty is simultaneously awe-inspiring and welcoming. Fitting perfectly into this scene is Tuscan VillaHDP from Florida Tile.
This traditional travertine inspired look has a modern palette and clean edges. The movement within each graphic and the premium glaze on the surface provides a luxurious distinction. A soft feel stands in strong contradiction to the extreme durability and slip resistance provided by this state-of-the-art glaze. The undulations on the surface create a subtle timeworn texture that transports you to the relaxed atmosphere of Tuscany.
Three fresh color choices enable this porcelain tile to stand out from the crowd. Arezzo Ivory stuns
with a warm white base and swirls of light gray and fawn hues, Cortona Beige is imbued with a palette of beiges and golds over a base of alabaster, and Florence Silver is a dramatic blend of soft gray tones that fuse into a sterling nebula. Each color is available in 6x6, 12x12, and 12x24 field tiles, a 36 piece mosaic, and a 3x12 bullnose.
Manufactured using proprietary HDP—High Definition Porcelain® printing technology and with the technical performance of porcelain, the Tuscan VillaHDP collection is appropriate for all applications in both residential and commercial settings. It is entirely made in the USA in our Green Squared Certified®, Advanced Manufacturing Center in Lawrenceburg, KY of 40% pre-consumer recycled content. It meets the DCOF AcuTest® requirements to be installed in wet areas and is GREENGUARD® and Porcelain Tile certified.
Shown on front: TUV20 12x24 Cortona Beige & Streamline 320 3x6 Buff
shown below: TUV30 6x6 & 12x12 Florence Silver
TUSCAN VILLA
Below: TUV10 12x12 &12x24 Arezzo Ivory
AREZZO IVORY
TUV10 6x6 TUV10 12x12 TUV10 12x24 TUV10/M12236pc Mosaic
CORTONA BEIGE
TUV20 6x6 TUV20 12x12 TUV20 12x24 TUV20/M12236pc Mosaic
FLORENCE SILVER
TUV30 6x6 TUV30 12x12 TUV30 12x24 TUV30/M12236pc Mosaic
TUSCAN VILLA
12x12
12x24
30x30
30x60
1
.5
8mm Pressed
9mm Pressed1 These values may vary from lot to lot. 2 These values are based on actual sizes including the grout joint. 3 May not apply to textured surfaces or tiles with uneven back patterns such as mesh mounted mosaics.
Field TileNominal Size (in)¹ Metric (cm) Pcs./Sq Ft2 Thickness3 Edge
Tuscan VillaHDP glazed porcelain floor and wall tile is appropriate for all residential and commercial wall, countertop, backsplash, and floor applications.
Notice: Not all flooring products are suitable for wet areas, specialized applications, or commercial use. Please refer to the American National Standard Specifications for Ceramic Tile (ANSI® A137.1) for ceramic, stone, and glass installation for specific usage and installation information.
This Florida Tile product will contribute to USGBC LEED® points and the ANSI® approved NAHB® Green Building Points.
Typical Uses
Color Variation
www.floridatile.com
#10049LT 9/19
P43C9
Trim Metric (cm)Nominal Size (in)Shape
Bullnose 3x12
Sku
7.5x30
are registered trademarks in the U.S. of Florida Tile, Inc.© 2019&
V3 Moderate Variation While the colors present on a single piece of tile will be indicative of the colors to be expected on the other tiles, the amount of colors on each piece may vary significantly. For example “that little bit of color” on one piece of tile may be the primary color on the next piece.
6x6 15x15 4 8mm Cut*
Above: TUV30 12x12 Florence Silver
Color reproductions in this printed piece may vary from actual tile colors.Final selection should be made from actual tile samples.
Color, texture, and finish variations may occur due to the nature of the product.
DCOF AcuTest®2 A137.1 ≥0.42 Pass
Porcelain Technical DataProperties (Floor)
ASTM® ANSI® Results¹6x6 & 12x12
Results¹12x24
Surface Hardness
Break Strength
Water Absorption
Intended Use4
Mohs Scale
C-648
C-373
N/A
N/A
250 lbf.
≤0.5%
N/A
7 Mohs
253 lbf. avg.
≤0.5%3
Residential, Light Commercial& Heavy Commercial
Residential, Light Commercial& Heavy Commercial
1 These tests are performed by a 3rd party testing lab using industry standard equipment and techniques. Values are offered in good faith as being accurate and typical of normal production. Due to the natural variation of raw materials and manufacturing processes, the values of the purchased product for any particular installation may vary.2 ANSI® A137.1 standard, ceramic tiles selected for level interior spaces expected to be walked upon when wet must have a minimum wet DCOF AcuTest® value of 0.42.3 Average production value4 Please visit www.floridatile.com/intended-use for further details.
Pass
7 Mohs
355 lbf. avg.
≤0.5%3
*note: In order to provide as many size formats as possible, some sizes may be originally pressed as larger formats and then professionally cut to size. For additional informationabout cut tile, please visit www.floridatile.com.