tutorial 2 - making a roy of the rovers comic
TRANSCRIPT
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
1/9
Tutorial 2 Creating a comic strip
What you need Photoshop, downloaded RotR comics, database, an idea!
1. Choosing a Story
There are plenty of gaps in the RotR timeline; most seasons only include around 10 matches, when
Rovers would often have to play over 50. But the challenge is trying to think of a story that isentertaining and true to RotR style.
Things to remember:
- Dont duplicate matches, if the match is documented then it shouldnt be done over.- Stay somewhat within the storyline of the era you are in; e.g. if doing a match for 1980/81
the season Rovers were relegated, it is best not to have them romping home 6-0 against
Melboro in the Derby!
- Try to be historically accurate (I have made Division 1 lists from 76/77 until 84/85 that are95% accurate). This goes for Cup matches too!
- Get your Melchester team correct!- Dont invent teams or player surnames!- Use a database or refer to the comics if you are going to name opposition players. I have a
database compiled from the downloaded comics that includes over 500 players.
- People seem to like stories that allow the reader to learn a bit more about the oppositionteams, but avoid having players from the wrong era, e.g. Newton Oates shouldnt play for
Burndean in 1977, he would have been 12!
- Most importantly your story must be possible to create from the frames/scenes availableto you, e.g. I wanted a scene where Duncan McKay punches Johnny Dexter in the players
bar, but couldnt find any fight scenes (I will try to make this scene later, and document it inTutorial 3 Advanced Edits).
Its probably best to do a Melchester match as your first comic as you then only have to edit one set
of kits, it saves a lot of time!
So what story shall we create in this tutorial? To keep it relatively simple, lets try a Division 1 match
between Melchester Rovers and Carford City, in the 1977/78 season. This season focuses on Rovers
European Cup run so few league matches are covered. Also nothing is known of Rovers final league
position. Therefore we have the freedom to make anything happen in our match.
The focus of this story will be the emergence of a young midfielder for the opposition, Carl Hunt,who plays well enough for Roy to rate him as someone to keep an eye on. Well have Rovers win
2-1 with a typical late goal, but we can change this as we go along.
2. The Players/Line-ups
I like to include at least the Rovers line-up, I think it makes the reader feel more connected to the
story. If it is possible I also like to mention or name drop a few of the opposition players (although
only where appropriate).
2.1 Melchester Players - Melchesters normal line-up for 1977/78 reads: Carter, Baxter, McKay,
Giles, Slade, Peak, Wallace, Gray, Race, Holloway, Eliot, Dixon. For simplicity well use this line-up.
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
2/9
2.2 Opposition Players - In my database I have 23 Carford City players, but they range across the
entire series. Its important to select players that fit the 1977/78 season, e.g. Kurt Gruber should not
be included as he joined Carford in 1983/84, although we can assume that Mike Gladwin (named as
captain in 83/84) had been playing for Carford since 77/78, even if that isnt confirmed in the comics.
From the 1978/79 season, we know that Richie Davis is Carford captain, so well refer to him and in
the 1979/80 season they have a forward called Henderson who scores against Rovers.
I like to have a name for the goalie too. In an album a story refers to Norman Jackson as a Carford
goalie from the 70s who Roy could never score against, having Jackson as our goalie adds another
dimension to our story. We now know that Roy cannot score!
So we have chosen five Carford players: Norman Jackson (goalie, 1), Mike Gladwin (defence, 5),
Richie Davis (Captain, 6) and Carl Hunt (midfield, 4) and Henderson (forward, 9). Five should be
enough for our readers to connect with Carford City.
To cheat a little, I like to drop the names of the players into scenes where the players are too small
to recognise. This avoids having to cut and paste lots of heads. Although adding correct heads reallybrings the story to life.
3. Decisions to make later
Some decisions just have to be left until you start selecting scenes. A story needs to be flexible, as
some scenes as just not possible to make.
3.1 Home or Away? - For our story Rovers can be the home or away side as no match against
Carford is recorded for 1977/78. We shall leave this decision until after we have picked some scenes.
If a lot of the scenes we want are from Rovers away matches its best to make Carford the home
side, as Mel Park is quite a unique looking stadium.
3.2 Day or night?Again we will decide this depending on the scenes we are using. It might not be a
majority decision here though, it could be down to what scenes are easiest to edit, e.g. lit floodlights
are one of the hardest features to replicate and make consistent.
3.3 GoalscorersIt might seem strange not to decide who we will have score, but you find the
match develops as you pick scenes rather than in your planning. For example, you have an idea to
have Vernon Eliot score the first goal, but the scene you like for the final pass includes Eliot in a
position where he couldnt possibly end up as the scorer. So you either rethink or give the first Eliot
a new identity/head/paste grass over him!
4. Preparing the Comic
4.1 FramesYou need to get the correct frame and heading from the correct season. You can cut
out your own or use mine. Mine are altered so that the frames are right-angular and straight. The
scans are all a varying angles as is the print so having a consistent frame is best and saves lots of
time.
4.2 OrganisationIn a folder called CARFORD,save the front page frame as CARFORD1.psd and the
second page as CARFORD2.psd. Keep both of these files open for now.
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
3/9
5. Selecting Base Scenes
At this stage we are just building a framework. We select scenes that we can link either through the
flow of the images or through text. We wont edit anything yet, not even resize or crop, just pick
some images and see how they lead from one to the next.
5.1 Top of the Front Page95% of the time the top frame is made up of one scene, not the normal
two. I like to keep the one scene for the very first page of a new story at least, as it gives you room tointroduce the story properly in the yellow box.
This makes selecting the scene easier, as you can flick really quickly through your comics. Start with
the 1977/78 season and scan along looking for a scene that looks like a good start off.
TIP: Good ways to start a story are: players walking out onto the pitch, a warm-up before kick-off, a
training session, team arriving in a town/country. Although you could start mid-match, I find that the
reader finds it harder to connect with the story, unless the match isnt your main story, maybe some
off-field issue is, then this would be fine.
Im going to select a training scene, mainly because Ive already used most of the other useable large
scenes in this season. A great thing about training session scenes is that they require little editing, a
lot of the time you only have to change the text. Ive picked Vernon Eliot at free-kick practice, from
77-12-17a. Select the scene and paste it into CARFORD1, name the layer FREEKICK and move it
under the frame, then move it until any red borders are hidden under the red frame.
5.2 Scene 2 - We now need to browse other training scenes to help end our training session. Think
about what the narration and characters are going to say, maybe Roy will reveal his line-up? Jimmy
Slade had been injured for a period of the 77/78 season, so maybe I can use the scene where Roy is
talking to Jimmy, perhaps checking his fitness or even better briefing him on Carfords star man Carl
Hunt!
While this is a great idea, you will notice that the speech bubbles are coming from Giles and Gray so
we need to change how the idea is presented, with Geoff saying something like, Roy must be
worried that Hunt will wind up Jimmy! Hes only just back from injury too and Blackie replies,
The Hunter may be a great ball winner but he does go overboard sometimes
So we have two slides that only require text editing!
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
4/9
5.3 Scene 3A really useful way of ending a passage in a story is to use The Roy.
Early in the story The Roy can also be used to really set the scene and give a lot of
depth to the tale. The Roy is this (left), a scene where there is only Roys head and
a speech bubble or two. While this is a really handsome Roy we need a bigger one
with more bubble to fit our space. Hows this (below)? And because he is so nice,
hes also wearing the correct shirt combination!
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
5/9
5.4 Scene 4The training session has ended and Roy looks enthused, therefore we should continue
with the happy feeling. Perhaps we can introduce Carl Hunt soon, but how and where? I think well
have Roy drive home and watch him on video! So scene 4 can be another cheat slide, so look for
one where Roy is in his car. Theres only two in the 1977 collection, one has a policeman in the car
and the other is a narrow, tall one of Roy getting into the car outside his house. Ill pick that one for
now and paste it in, but will look for a better one later (77-10-08b).
5.5 Slide 5
On the same page as the car there is a good scene of Roy watching TV, well have that
too:
While the car scene is the wrong shape, this is fixable, but it would be preferable to find a better
scene. But for now, well leave this row as it is.
5.6 Scene 6We need a scene now with Carl Hunt in it. Carl Hunt doesnt appear until 1984 with a
new artist and a massively different palette, so for now just look for a nice action scene, it really
doesnt matter who is featured. Firstly check some Carford matches from 1976/77 and 1978/79, this
again will reduce the amount of editing you need to do! For now just think about how you want to
introduce Hunt, what kind of first impression shall he give; a goal, a tackle, a foul, some skill?
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
6/9
TIP: While it may seem that I am cheating a lot this is only because we a busy setting up the story,
in the main match itself it is far more important to edit.
TIP: Be careful when including Penny and the twins. Penny changes her look a lot and you dont want
the twins appearing in a story before they were born! This Penny and baby are okay as they are from
the 1977 comics so fits within our timeframe.
I couldnt find a nice Carford scene so have gone with a foul from the Zalmo match (77 -11-12a). Itsgood because it has no stadium background, the blue and white can be used to suggest Roy is
watching in TV, although Ill probably change this to red later.
5.7 Scene 7As I have chosen a scene showing Hunts tough side, I should now balance it with one
showing his skilful side.
And there we have it! We have completed the base layer for the first page of our story!
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
7/9
6. Resizing Scenes
Our base above has a pretty good fit already,
with one obvious exception, the car! This scene
needs to be wider; firstly make the image
bigger. We dont need all of the car to bevisible or the gap above Pennys speech
bubble. Try it now. You can see that the gap is
much smaller now and that even though the
image is larger it doesnt look out of place (i.e.
the black lines are not too thick). We can now
resize the scene on the right to narrow the
gap entirely.
Cut sections away from the scenes to recreate
the borders between them. Try to make them
all a similar size.
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
8/9
7. Creating Groups
To keep your comic page organised it is best to create sub-folders for each
scene. In Photoshop these are called Groups. Click on your scene and go to Layer
> New Group and create a group named after each scene. Move the scene into
the correct folder as you go. It is best to now click the arrow beside each folder
so that the contents are hidden. [Save]
All your editing, text, border, re-colours, heads, etc. should be kept in the
correct Group folder.
8. Borders
Some scenes need extra borders added; use the Line Tool, #000000, Size 3. Draw each line within
the correct Group. This means that by selecting the Group folder you can move everything in thatScene at the same time.
-
7/28/2019 Tutorial 2 - Making a Roy of the Rovers Comic
9/9
9. Editing each Scene
Refer to Tutorial 1 for a guide on editing each scene.
Once you have re-coloured and added the text for each scene you should have something that looks
like this:
Thats it then for this tutorial. Thanks for reading and please have a go at your own comic.