28054R

Flat TV Screen Wall Mount 13 - 70” - Flat to Wall

Main Features

USER GUIDE•TVSizeRange:13-70”•MaximumWeightCapacity:50kg•MountFunction:FlattoWall-UltraThin•WalltoTVDistance:14.5mm•CompatiblewithVESASizes:100-600mmvertically 200-800mmhorizontally

•UniversalMountingSize:800x600mmMax.

•We have not supplied wall fixings with this product. All walls differ in strength and thickness. Consult a qualified installer or seek advice from your local DIY/hardware store on purchasing suitable wall fixings to safely mount the bracket on the type of wall being used.•Check the contents list and images below to check there are no missing or defective parts. •Never exceed the Maximum Weight Capacity shown above.•Read these instructions carefully before installation. If in any doubt about safely installing this product, contact a professional installer for assistance.•This product was designed to be installed on wood stud walls and solid concrete/brick walls. When fixing to walls screws/bolts should be fixed into bricks/stone not into mortar courses.

•Make sure the wall will support the combined load of the equipment and hardware. Also check for hidden wiring or plumbing. •Make sure that the heads of the screws/bolts you buy as wall fastenings are the correct size to hold the bracket securely in position. •For larger/heavier TVs we recommend that you ask someone to assist you with lifting and positioning your TV.•This product is suitable for indoor use only. •Improper installation or use of this product can result in product failure, damage or personal injury. •This product contains small items that could cause choking if swallowed, so keep these items away from children and pets. •Appropriate safety equipment and proper tools must be used for installation. Always check manufacturer’s operating and safety instructions before using tools and other equipment

WARNING

Components

Wall Mount & VESA Compatibility• VESA is the standard adopted by most TV manufacturers for wall bracket mounting.

• There are 4 holes on the back of every flat screen TV and the space between the holes is governed by the VESA standard.

• VESA comes in a range of sizes depending on the weight and size of the flat screen TV; sizes 50 x 50mm, 75 x 75mm, 100 x 100mm, 100 x 200mm and so on... are standard. Not all flat screen TVs are compliant, contact the TV manufacturer for assistance if your TV does not appear to comply with VESA.

• To check if your TV or monitor is compliant, look at the rear of the display there should be 4 screw-holes in a square pattern or in larger displays a rectangular shape. See Fig. 2 opposite, with VESA mounting points shown in white circles.

• Measure the distances marked (2) (horizontal) x (1) (vertical) in mm to find your VESA format.

Fig. 2

Before installation check that you have all the components shown here and that none of them is damaged.

Please Note wall fixings are not supplied with this product.

M5 x 10mm 4pcs

Small Plastic Spacers 4pcs

M-A

Fig. 1

M4 x 10mm 4pcs M4 x 20mm 4pcs

Large Plastic Spacers 4pcs

A B

min 200mm - max 800mm

min 100mm - max 600mm

M-B M-C M-D

M-E M-F M-G M-H

M-I M-J M-K M-L

M5 x 20mm 4pcs

M8 x 15mm 4pcsM6 x 10mm 4pcs M6 x 20mm 4pcs M8 x 30mm 4pcs

D4 4.5 x 10washer 4pcs

D8 8.3x16washer 4pcs

D5 5.5 x 12washer 4pcs

D6 6.3 x 12washer 4pcs

M-N

M-M

E F

C

D

Left Wall Plate Right Wall Plate Adaptor Bracket 2pcs

Supporting Spacers 2pcs Double Sided Tape 4pcs Wall Template

Attach the adaptor brackets and supporting spacers C & D to the TV. Four each of two lengths of M4, M5, M6, and M8 mounting bolts are provided M-A , M-B , M-C , M-D , M-E , M-F , M-G and M-H . Attach the adaptor brackets and supporting spacers C & D to the VESA mounting holes use the size which fits your TV. Use longer lengths and plastic spacers M-M or M-N for TV’s with curved or recessed back panels as shown in Fig. 11.

If you are mounting a television with a flat back you can use a shorter bolt and will not need a plastic spacer, see Fig. 12. Make sure all four bolts are properly tightened and held in place by at least three full turns.

Before mounting your TV check that it will be possible to make all necessary connections when it is in position, if not make the connections now. With the help of another person, carefully slide the adaptor brackets C (now attached to the TV) down into the wall plates A & B , see Fig. 13. Do not release the TV until the adaptor brackets C are securely located in the wall plates A & B .To adjust the horizontal angle of the display, hold both sides of display firmly and gently rotate it into the desired position, see Fig. 14PLEASE NOTE: For larger/heavier TVs always ask someone to assist you with lifting and positioning your TV.

© Philex Electronic Ltd. 2011. V1

STEP 3 - Hanging and securing the TV

Mounting your TV - OverviewOnce you have decided where to locate your TV and where the bracket needs to be positioned, mounting requires the 3 steps described below. Step 1 Use the template supplied to mark and drill fixing holes in the wall and attach the wall plates A & B to the wall using suitable screws/bolts. Step 2 Attach the adaptor brackets and supporting spacers C & D to the back of the TV using the plastic spacers M-M or M-N if required. Step 3 Slide the adaptor brackets C (now attached to the TV) down into the wall plates A & B , straighten the TV and make your connections.

STEP 2 - Attaching the TV Mounts to the TV

STEP 1 - Fixing the Wall Plates to the Wall

Fig. 3 Fig. 4

Fig. 5 Fig. 6

Fig. 9

Fig. 11

For further information or any queries please contact our Customer Careline: 08457 573 479 (Local rate – UK only)

Technical Support: www.philex.com/support

Fig. 7 Fig. 8

Fig. 10

Fig. 12

Fig. 13

Fig. 14

Template

M-A

M-B

M-C

M-D

M-E

M-F

M-G

M-H

M-I M-J

M-K M-L

A B

E

F

C

D

A B

C

D

C

D

M-N

M-M

M-I M-J

M-K M-L

Use larger spacer with M8 bolt

Make sure bolts are screwed into the back of the screen with at least 3 full turns

FixingtoWood(StudWalls)Use a good quality stud sensor to locate the centres of two adjacent upright studs in the area where you want to mount your screen (the centre of each stud is usually approx. 400mm apart). It is a good idea to verify where the studs are located with an awl or thin nail and mark the centre position with a vertical line. Peel the paper from the back of the double sided tape on the template supplied and line up the dotted lines on the template with the centre point of your two studs, making sure the template is level (use a spirit level) see Fig. 3 & 4. The two wall plates A & B are attached to the wall using two appropriate screws each, as shown in Fig. 5 & 6. Make sure the screws are suitable for wood and large enough to support the weight of the TV and mount (if in doubt ask for advice at your local DIY/hardware store and remember to make sure that the heads of the screws are the correct size to hold the wall plates securely in position).Use the hole positions marked on the template to drill holes into the stud wall - Please Note: you just need to drill the two holes top and bottom closest to the dotted line on the template as shown in Fig. 5 & 6 (the third hole marked is not used). After drilling remove the template and screw the wall plates A & B onto the wall making sure the screws are properly tightened. FixingtoConcrete/BrickWallsAs with attaching to wood, the template is used to make sure your drill holes are accurately located. You should also make sure the holes are drilled into brick or stone and not into mortar courses. For fixing wall plates A & B to brick walls use three sets of screws/bolts, washers and wall plugs suitable for the type of wall you are mounting on to (if in doubt ask for advice at your local DIY/hardware store and remember to make sure that the heads of the screws/bolts are the correct size to hold the wall plates A & B securely in position), see Fig. 7-9. After drilling remove the template and screw/bolt the wall plates A & B onto the wall making sure the screws/bolts are properly tightened.

Make sure left and right plates are the right way round