twin screw press - a&s thai works co.,ltdasthaiworks.com/file-pdf/twin_screw_press_bs49.pdf ·...
TRANSCRIPT
Manufactured by: A & S Th ai Works Co . , Ltd . Office: sales@asthaiworks. com MD: [email protected] Service Manager: [email protected] Sales Manager: [email protected]
Website: www.renderingmachine.com Phone: (662) 313 1540 | Fax: (662) 313 1550 Sverre Golten: +66 81 825 7104 Sarot Pongmanee: +66 81 810 2283 | Wichai Konyoung: +66 89 813 0182
ASTW has modernized and redesigned the trusted Stord type tw in screw press to be specif ically suitable for the low temperature red meat rendering industry. The �rst of the new model is operating successfully in a pure beef rendering plant in Australia.
Short length The new press has a shorter press leng th optimized for rendered products, he avier foundations and a more robust cage structure than the old press, orig inally designed for �shmeal production.
Stainless Steel Screws The press screw �ights are solid stainles s steel, not just mild steel with stainl ess cladding. The diameters of the shafts have been enlarged at the in-feed end to further reduce t he risk of shaft breakages when pressing dense beef bones.
Step drilled screws The new screens are not the typical thin screen with a bac king plate which sometimes tear under pressure from beef bones, but single thickness, step dr illed, stainless steel screens.
Roller bearings The forged steel shafts give maximum drive strength and are supported by large spherical roller bearings enclosed in an oil bath. No more faulty oil pumps!
Shaft mounted gear box The shaft speed reduction is now delivered by an exter nal, shaft mounted SEW gearbox with VSD speed control.
HEAVY DUTYTwin Screw Press BS-49 for Rendering
A & S Thai Works Co., Ltd.
TWIN SCREW PRESS BS-49
TECHNICAL DESCRIPTION:
Capacity up to 18 tons input/hr.
CALL FOR A QUOTE
www.renderingmachine.com
r asthaiworks.comasthaiworks.com
Gear - Motor Wet material
Press water outletPressedOutlet
Steel foundation
H2
H1
H