469399 rev00TC6

3032-55"

75 x 75mm100 x 100mm, 200 x 100mm200 x 200mm, 300 x 300mm400 x 200mm, 400 x 400mm

Fit Wall

Bracket

Covers

7

Cable Management

Ensure cables don’t restrict arm movementCheck all fittings are tight

9 Lock tilt

Ø3mmWood

Ø8mmMasonry 10mm

Tools Recommended

Box Contents

A

Measure the TV fixing holes 2

Prepare the TV mounting plate

OPTION 1OPTION 2

B1

Your TV mount fits the following TV fixing sizes

OPTION 2400 x 200mm

OPTION 3300 x 300mm, 400 x 400mm

OPTION 175 x 75mm, 100 x 100mm,200 x 100mm, 200 x 200mm

x4

Use the option that fits your TV fixing sizes

3

Retain all packaging in case the bracket needs to be returned. Contents may vary from photography/ Illustrations. You will not need all these parts, so expect there to be some left over depending upon thespecification of your TV.This product is intended for indoor use only. Use of this product outdoors could lead to failure andpersonal injury.

It is the responsibility of the installer to ensure that the mounting wall is of a suitable standard andvoid of any services (eg gas, electricity, water etc).AVF accept no responsibility for any damage or loss caused by installing this product in a substandard wall.Periodically check all nuts and bolts are tight.

IF YOU ARE IN ANY DOUBT, CONSULT A QUALIFIED CONTRACTOR

This product is sold as a home DIY product and as such, it is the responsibility of the installer toensure the product is correctly installed.

VESATV Fixing

Holes

10mm

C

CB1

B1

B2

B2

Prepare TV Bracket 1

i

ii

Remove andkeep for step 8

Remove andkeep for step 3

100mm

200mm

100mm

200mm

400mm

200mm

400mm

300mm

300mm

400mm

OPTION 3

B1 or B2

U1

U1

U2U2

B2

B2

B1

B2

B1

B1

B2

Connect TV8

C

C

i

Help Line: 0333 320 8027Monday - Thursday 08:30 - 17:00 Friday 08:30 - 16:00

Calls charged at local rate

Read the operating instructions and keep them in a safe place.If you have any questions about this product or issues with installation

contact the help line before returning this product to the store.

STOP400mm

300mm

300mm

400mm

75mm

75mm

100mm

ii

Installation video guide and TV Height Calculator tool at myTVmount.com

U1x8

M610mm

U2x8

M6

T1x4

M416mm

M6

T10x4

T9x4

M5M4

30mm

T2x4

M516mm

T3x4

M616mm

T5x4

M630mm

T6x4

M816mm

T7x4

M830mm

T8x4

M530mm

T4x4

T12x8

M6

W3x3 W2x3 W1x3 T11x4

Remove dust from hole

65mm

Lubricate screw thread with soapTighten with hand tools only Lubricate screw thread with soapTighten with hand tools only

Solid Wall6 Wood Stud6

50mm

W2 W1

Ensure drill marks are in the centre of the wood stud

Ø8mmMasonry

Ø3mmWood

Deciding the correct screw and spacer combination4

You are provided with 4 diameters

fixing screws, M4, M5, M6 and M8.Determine the screw diameter thatfits and remember for the next step

of TV

NoTV has flat back

and flush fixing holes

MaybeTV has flat back withrecessed fixing holes

YesTV has irregular or

obstructed back

When deciding which screw diameter andlength is suitable for your TV it is important

to STOP immediately as soon as you feelany resistance to prevent damage to your TV

After completing step 5 you will have fittings left over, please keep in a safe place forfuture reference

Attach the bracket to the back of your TV using a suitable combination of screw, washer

and spacer combinations. DO NOT OVERTIGHTEN!

Ø8mm

Ø3mm

Do not use W2 wall plugs in wood stud

Fitting the TV Mounting Plate5

Do I need to use spacers T11 or T12 ?Spacers are provided so that you can achieve the correct fit between the back of yourTV and Mounting Plate, please see below for examples of when spacers are required

Top

T9 or onlyrequired for

certain screws

T10

T11 or T12if required

T1 - T8

Top

A A

W1

Get it right with our easy to use online TV Height Calculator at myTVmount.com

Get it right with our easy to use online TV Height Calculator at myTVmount.com

T9 T9 T10

T5/T6

T7/T8T3/T4T1/T2

and / orIf required

T12T11