ubd slurry pump - townley engineering & manufacturing co., inc. · 2019. 8. 13. · series...
TRANSCRIPT
The Perfect UpgradeUBD® Slurry Pump
UBD®
Slu
rry
Pum
p
UBD® Series Centrifugal Slurry PumpThe Perfect Upgrade
The clear choice for solids pumping is the patented* UBD® Series Centrifugal Slurry Pump.
The UBD® is well suited for matrix-pit / face-of-the-mine hydro-transport, in-plant cyclone feed mill pumps and tailings discharge.
For over a decade, they have been used actively in Phosphate, copper and iron mining applications. These pumps were created to reduce wear and improve peak performance over OEM styles.
*US-7470106
UBD® Pump ExpectationsOur engineering design team has created an innovative wet-end that exceeds the expectations of our customers.
Ease of Maintenance:• Exact mechanical and piping fit to on-site OEM footprint
• Lifting eye locations to suit
• More predictive outage schedules
Extended Wear Life:• More robust vane design
• Patented* laminar flow suction port to better direct media flow
• Patented* pocketed impeller shrouds in volute to reduce recirculation and impeller tip wear
• Advanced metallurgy choices to match customer’s applications
Performance:• Matching hydraulic pump curve of OEM
• Maintains longer peak hydraulic performance
Disclaimer: The information presented herein is a general guide to our products. We make no warranties, expressed or implied, with respect to the accuracy or usefulness of the information contained. Townley reserves the right to change technical specifications from time to time without notice.
Use of any or all information in this document is done so at the sole discretion of the user. FIP 5/2016
The patented sweeping style suction port reduces entry turbulence and enhances media flow through impeller
The patented parallel pockets cast into the volute body with mating impeller shrouds, ensure less media recirculation and wear on both the suction and gland-side gap as well as minimal shroud tip turbulence erosion.
Materials UBD® style pumps are very well suited to handle coarse or fine feed slurries.
Townley’s highly skilled metallurgists using our “state of the art” metallurgical lab technology, produce consistent quality castings and can create unique metallurgy to withstand the most severe service
We also provide our bonded in Towniprene® urethane liners with the same patented features for general mill tailings and other fine feed service.
Townley has five induction furnaces capable of pouring up to 16 tons of white iron; we consistently have some of the best lead times in the industry.
Our productive CNC machining center, provides the perfect final fit and finish to each mating casting.
Townley Standard Metallurgy:HC 28
CM 22
Ni-Hard
CD4-MCu
HC 34
High-Chrome Alloy
Chrome-Molybdenum
Nickel-Chrome Alloy
Duplex Stainless
High-Chrome
General Abrasion
Very Abrasive Media
Moderate Slurry
High Chloride / Fluoride
pH Excursions
Along with the wet-end improvements, Townley was the first to create: • A heavy duty shaft to prevent deflections induced
by uneven impeller loads
• A pre-tested bearing assembly and pedestal to assure reliable field operation
• A unique impeller release collar to provide the safe removal of the worn impeller
• Specially formulated high-chrome and chrome-moly alloys for each application
Disclaimer: The information presented herein is a general guide to our products. We make no warranties, expressed or implied, with respect to the accuracy or usefulness of the information contained. Townley reserves the right to change technical specifications from time to time without notice. Use of any or all information in this
document is done so at the sole direction of the user.
* Bonded-in Towniprene® urethane liner option for fine slurry available
Call for additional sizes
Phosphate Mining
• Matrix Hydro-transport (primary & booster)
• Water jet pit pump
• Tailings transport pumps (primary & booster)
Metal Mining
• Cyclone feed pumps
• Miscellaneous process pumps
• Tailings pumps
Oil Sands
• Tailings transport (primary & booster)
• Process pumps
ApplicationsThe performance characteristics of this re-engineered pump effectively improves the consistency and “reliability of the process output increasing the total % solids transported and extending wear life. This has resulted in a measurable improvement in the “cost per ton a day” for the users.
180615
Mail: P.O. Box 221 • Candler, FL 32111 • 10551 SE 110th St. Rd.
Phone: (800) 342-9920 • Fax: (352) 687-1862
www.townley.net
My flesh and my heart may fail, but God is the strength of my
heart, and my portion forever.
Psalm 73:26
Made in the USA