ucpc rp1.8 new features nov 2015 ucpc team 19 nov 2015ucpc rp 1.8.0 release features presentation1
DESCRIPTION
Supervision & operation for operators 19 Nov 2015UCPC RP Release Features Presentation3TRANSCRIPT
UCPC RP 1.8.0 Release Features Presentation 1
UCPC RP1.8 New Features
Nov 2015UCPC Team
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 2
New Features (in summary)Release 1.8.0 [released] (mayor) Release notes•Release date: 16 Oct 2015•Main features: (JIRA new features) Documentation
• Supervision & operation: for operators• Comments on devices: general tool. Find it under
Management>Utilities(local)>Device Comments• Front-end smooth importation (no need to stop distributed and/or
driver)• Miscellaneous faceplate improvements
• Control (for everyone)• Regulation: PID auto-tuning algorithms • 1st order filtering in Input devices: AI, AIR, AS• New devices: Stepping motor for motion based applications + FESA
integration• Generation tools: for developers
• Integration of PLC suppliers project actions (e.g. import/compile) from UAB
• Additional parametrization possible: PID + Warning Time Delay• Alarms: complex conditions in the spec (Input, AA: Enable
Condition)• Specific features and bugfixes:
• All issues - see JIRA
• From UNICOS project schedule page
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 3
Supervision & operationfor operators
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 4
Supervision & Operation (1): Comments on devices: general tool. • Find it under Management>Utilities(local)>Device Comments
• Change start dateto see all comments
• Filter on Active
• Also ‘comments’ visible from faceplate as well, new tab.
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 5
Supervision & Operation (3): Miscellaneous faceplate improvementsAnalogAlarm• ‘hide’ limits if not used• Buttons to ‘link’ to objects• Requires regen+reimport with 1.8
PID (Controller)
• Can parametrize in spec• Buttons to ‘link’ to objects • Requires regen+reimport with 1.8
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 6
Supervision & Operation (4): Requests from veteran CRYO operators• "Auto" grayed out from Top PCO • Add "Warning" before Stop PCO
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 7
Controlfor everyone
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 8
Control (1): Regulation: PID auto-tuning algorithms
• Auto-tuning for PID/Controller• Easy tuning. Available from faceplate• Several methods to choose from.• Open Loop (disconnect process) for initial rough tuning
• RELAY method: Open loop auto tuning• SIMC method
• Identification based on step response • Manual tuning based on fast/robust IMC controller
• Close Loop (controlling process) for fine tuning• IFT: Close loop auto tuning
• More detailed training available - contact [email protected]
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 9
Control (2): 1st order filtering in Input devices: AI, AIR, AS• Requested by CV-CL (and others)• Ability to filter (1st order) the raw hardware input from AI• Need to define in spec field: "Filtering Time (s)"• Faceplate shows filter time constant
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 10
Control (3): New devices: Stepping motor for motion based applications• Stepping Motors (features)
• Precise positioning• Continuous feedback of the current positioning.• Possibility of external feedback with Encoder or
Potentiometer.• Dynamic set of speed • Continuous positioning
• 2 New Objects: • Stepping Motor• Encoder
• FESA integration: done with ‘Expert Template’ –[email protected] for more info
• Developed for use on CTF3 (test installation for CLIC)
New WinCCOA Faceplate
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 11
Generation toolsfor developers
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 12
Generation Tools (1): Integration of PLC suppliers project actions (e.g. import/compile) from UAB• TE-CRG* developed ‘command line interface’ (CLI) to Step7
• Integrated into UCPC Wizard as new ‘Step 7 Project Generator’• Calls Step 7 directly from UCPC Wizard• Allows user to compile project from
‘User base project’ zip archive(=h/w config + comm)
* Thanks to A. Tovar, M.Dudek, T.Wolak, M.Pezzetti,...
• Similarly, we developed a CLI for Unity• Integrated into UCPC Wizard as new ‘Unity Project Generator’• Calls Unity directly from UCPC Wizard• Allows user to compile project from ‘User base project’ stu file
(=h/w config + comm)
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 13
Generation Tools (2): Additional parametrization possible: PID + Warning Time Delay• Controller: can add APAR/AS/AI/AIR on all default PID parameters
• Access via ‘buttons’ on the faceplate
• N.B. requires regen+reimport with v1.819 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 14
Generation Tools (3): Alarms: complex conditions in the spec (Input, AA: Enable Condition)• Digital Alarm
• New in version 1.8 any kind of Boolean expressions can be placed directly in the Input column of the alarm, as for example
• Condition can be entered in a simplified form, as for example instead of typing:NOT DB_DI_ALL.DI_SET.UAPX_UBTA_R12_286.PosSt OR NOT DB_DI_ALL.DI_SET.UAPX_UBTA_S12_287.PosSt• it’s enough to type:NOT UAPX_UBTA_R12_286 OR NOT UAPX_UBTA_S12_287
• Analog Alarm• New "Enable Condition" column• HH/H/L/LL thresholds: can include simplified logic now
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 15
Supervision & Operation (2): Front-end smooth/online importation• Front-end smooth/online importation• no need to stop distributed* and/or driver and/or front-end* NOTE: currently you do need to stop distribution manager because of Access Control issue – ref: IS-1732 ... SCADA team is working this, will be fixed before YETS
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 16
New
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 17
New UCPC RP 1.8 Documentation: http://cern.ch/unicos-cpc-help• Click 1.8.0 doc
**New Format**Please review and let us know if you find problems, or suggest improvements, etc. Thanks!
19 Nov 2015
UCPC RP 1.8.0 Release Features Presentation 18
Reverse Engineering Wizard• Will allow reverse engineering of
RP 1.5, 1.6, 1.7 and 1.8 applications• Can fully reverse engineer spec
(from PLC and WinCC OA exported files)• Or can recover existing
parameters from existing PLC or WinCC OA configuration by doing just a partial re-engineering• Tool to be released soon
19 Nov 2015