ul test report and procedure-pzbfns.pdf · ul test report and procedure standard: ul 62368-1, 2nd...

Issue Date: 2017-07-16 of 19 Report Reference # E302944-A6001-UL2017-07-16

UL TEST REPORT AND PROCEDURE

Standard: UL 62368-1, 2nd Ed, 2014-12-01 (Audio/video, information and communication technology equipment Part 1: Safety requirements)CAN/CSA C22.2 No. 62368-1-14, 2nd Ed (Audio/video, information and communication technology equipment Part 1: Safety requirements)

Certification Type: Listing

CCN: QQJQ, QQJQ7 (Power Supplies for Use in Audio/Video, Information and Communication Technology Equipment)

Product: Switching Adapter

Model:PS96AxxxYyyyyM(For variables xxx and yyyy refer to Enclosure 7-01�

Rating:Input: 100-240Vac, 50/60Hz, 1.5AOutput: see Enclosure 7-01 for details.

Applicant Name and Address:

SHENZHEN FLYPOWER TECHNOLOGY CO LTDA2ND BLDG, HAOSHAN LINPOKENG2ND INDUSTRY ZONENANPU RD, SHAJING BAOAN DISTSHENZHENGUANGDONG 518125 CHINA

This is to certify that representative samples of the products covered by this Test Report have been investigated in accordance with the above referenced Standards. The products have been found to comply with the requirements covering the category and the products are judged to be eligible for Follow-Up Service under the indicated Test Procedure. The manufacturer is authorized to use the UL Mark on such products which comply with this Test Report and any other applicable requirements of UL LLC ('UL') in accordance with the Follow-Up Service Agreement. Only those products which properly bear the UL Mark are considered as being covered by UL's Follow-Up Service under the indicated Test Procedure.

The applicant is authorized to reproduce the referenced Test Report provided it is reproduced in its entirety.

UL authorizes the applicant to reproduce the latest pages of the referenced Test Report consisting of the first page of the Specific Technical Criteria through to the end of the Conditions of Acceptability.

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.

Prepared By: Candy Guo / Project Handler Reviewed By: Bobby Liu / Reviewer

Created by UL Document Assembler 2017-07-17 21:05:44 -05:00


Supporting Documentation

The following documents located at the beginning of this Procedure supplement the requirements of this Test Report:

A. Authorization - The Authorization page may include additional Factory Identification Code markings.

B. Generic Inspection Instructions -

i. Part AC details important information which may be applicable to products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of this Test Report.

ii. Part AE details any requirements which may be applicable to all products covered by this Procedure. Products described in this Test Report must comply with any applicable items listed unless otherwise stated in the body of each Test Report.

iii. Part AF details the requirements for the UL Certification Mark which is not controlled by the technical standard used to investigate these products. Products are permitted to bear only the Certification Mark(s) corresponding to the countries for which it is certified, as indicated in each Test Report.

Product DescriptionUnit is a AC to DC power supply employing a switching mode transformer, an AC inlet and a (non-detachable) polarized output connector. All electrical components are mounted on a PWB and housed in a plastic enclosure.

Model DifferencesAll models are identical to each other except for model designation, output rating, transformer and some non-critical components.

Test Item Particulars

Classification of use by: Ordinary PersonChildren likely to be present

Supply Connection: AC Mains

Supply % Tolerance: +10%/-10%

Supply Connection – Type: pluggable equipment type A -appliance coupler

Considered current rating of protective device as part of building or equipment installation:

20 A;Installation location: building

Equipment mobility: movable

Over voltage category (OVC): OVC II

Class of equipment: Class I

Access Location: N/A

Pollution degree (PD): PD 2

Manufacturer’s specified maximum operating ambient: 30

IP protection class: IPX0

Power Systems: TN



Altitude during operation (m): 5000 m

Altitude of test laboratory (m): 2000 m or less

Mass of equipment (kg): 0.4

Technical Considerations

The product is intended for use on the following power systems : TN Considered current rating of protective device as part of the building installation (A) : 20 Mains supply tolerance (%) or absolute mains supply values : +10%/-10% The equipment disconnect device is considered to be : Appliance inlet The following were investigated as part of the protective earthing/bonding : Protective bonding

conductors from Inlet earthing pin to PWB.The Risk Group of a lamp or lamp system (including LEDs) is : Exempt

The following are available from the Applicant upon request : Installation (Safety) Instructions / Manual The product was submitted and evaluated for use at the maximum ambient temperature (Tma)

permitted by the manufacturer’s specification of : 30

Additional InformationN/A

Additional StandardsThe product fulfills the requirements of: N/A, EN 62368-1:2014

Markings and Instructions

Clause Title Marking or Instruction Details

F.3.2.1 Equipment identification marking – Manufacturer identification

Listee's or Recognized company's name, Trade Name, Trademark or File Number

F.3.2.2 Equipment identification marking – model identification

Model Number

F.3.3 Equipment rating marking – ratings

"Input Ratings (voltage, frequency/dc, current/power)", "Output Ratings (voltage, frequency/dc, current/power)"

F.3.5.3 Fuses – replaceable by skilled person

(component ID: F1), "Ratings (T3.15AL, 250VAC)", and (symbol of required characteristics) located on or adjacent to fuse or fuseholder or in service manual.

F3.3 Equipment rating marking –output ratings

Output Ratings (voltage, frequency/dc, current/power) and polarity

Special Instructions to UL RepresentativeFor transformer test - When the tests are conducted at other location, inspect test record and specification sheet provided by the component manufacturer. Verify the specification sheet indicates 100% routine test specified in Production-Line Testing Requirements be conducted at the component manufacturer.



BD1.0 TABLE: Product-Line Testing Requirements

BD1.1 Electric Strength Test Special Constructions – Refer to Generic Inspection Instructions, Part AC for further information.

Model Component Removable parts Test probe location

Test V rms Test V dc Test Time, s

All models Transformer T1 N/A Primary to Secondary

Min. 4000 Vpeak

Min. 4000 Min. 1s

Earthing Continuity Test Exemptions – This test is not required for the following models:BD1.2

N/A

Electric Strength Test Exemptions – This test is not required for the following models:BD1.3

N/A

Electric Strength Test Component Exemptions – The following solid-state components may be disconnected from the remainder of the circuitry during the performance of this test.

BD1.4

N/A

Sample and Test Specifics for Follow-Up Tests at UL

Model Component Material Test Sample (s) Test Specifics

-- -- -- -- -- --



4.1.2 TABLE: List of critical components Pass

Object / part No. Manufacturer/trademark

Type / model Technical data Product Category CCN(s)

Mark(s) of conformity

Supplement ID

01. Label Interchangeable Interchangeable Minimum 80 degree C, suitable for its application surface.

PGDQ2 or PGJI2

UL

01a. Label (Alternate) --- -- Molded as part of enclosure, Hot stamping, laser etching or silk screened.

-- --

02. Plastic Enclosure SABIC INNOVATIVE PLASTICS B VE45329

940(f1) Rated V-0, minimum 1.5 mm thick, 120 degree C. Two parts construction secured together by screws or ultrasonic welding. See supplementary 7-02 for details.

QMFZ2 UL 07-02

03. Grounding wire Interchangeable Interchangeable Green/Yellow, minimum 18 AWG,minimum 105 degree C. one end mechanically secured then soldered to earthing terminal of Appliance Inlet; the other end hook and solder to PWB.

AVLV2 UL



04. Appliance Inlet ZHE JIANG BEI ER JIA ELECTRONIC CO LTDE225980

ST-A04-001,ST-A04-002, ST-A04-004, ST-A04-001-LA, ST-A04-001-LB

2.5A, 250VAC, minimum 70 degree C

AXUT2 UL

04a. Appliance Inlet (Alternate)

DONGGUAN HUACONN ELECTRONICS CO LTDE340249

HC-66, HC-66+ 2.5A, 250VAC, minimum 70 degree C

AXUT2 UL

04b. Appliance Inlet (Alternate)

ZHEJIANG LECI ELECTRONICS CO LTDE302229

DB-6 Series 2.5A, 250VAC, minimum 70 degree C

AXUT2 UL

04c. Appliance Inlet (Alternate)

YUEQING YANHUI ELECTRONIC CO LTDE334847

DB-14-S, DB-14-S-1, DB-14-S-2

2.5A, 250VAC, minimum 70 degree C

AXUT2 UL

04d. Appliance Inlet (Alternate)

RONG FENG INDUSTRIAL CO LTDE102641

RF-190 2.5A, 250VAC, minimum 70 degree C

AXUT2 UL

04e. Appliance Inlet (Alternate)

TECX-UNIONS TECHNOLOGY CORPE220004

TU-333 Series 2.5A, 250VAC, minimum 70 degree C

AXUT2 UL

05. PWB Interchangeable Interchangeable V-0 or better, minimum 130 degree C.

ZPMV2 UL

06. Fuse (F1) Interchangeable Interchangeable T3.15AL, 250V JDYX UL

06a. Fuse (F1)(Alternate)

CONQUER ELECTRONICS CO LTDE82636

PDU T3.15AL, 250V JDYX2 UL

06b. Fuse (F1)(Alternate)

SHENZHEN LANSON ELECTRONICS CO LTDE221465

3K, 3N T3.15AL, 250V JDYX2 UL



06c. Fuse (F1)(Alternate)

KING WAHOO ELECTRONICS CO LTDE302100

3TG, 3TC T3.15AL, 250V JDYX2 UL

06d. Fuse (F1)(Alternate)

XC ELECTRONICS (SHENZHEN) CORP LTDE249609

3T, 3F, 4T T3.15AL, 250V JDYX UL

06e. Fuse (F1)(Alternate)

WALTER ELECTRONIC CO LTDE56092

ICP, TAP T3.15AL, 250V JDYX UL

06f. Fuse (F1)(Alternate)

SUNNY EAST ENTERPRISE CO LTDE133774

TDP T3.15AL, 250V JDYX UL

07. Varistor (VR1) (Optional)

LIEN SHUN ELECTRONICS CO LTDE315524

10D471K, 14D471K Rated 300Vac minimum,minimum 105 degree C, min. V-1 coating.

VZCA2 UL

07a. Varistor (VR1) (Optional) (Alternate)

HONGZHI ENTERPRISES LTDE324904

HEL10D471K, HEL14D471K

Rated 300Vac minimum,minimum 85 degree C, min. V-1 coating.

VZCA2 UL

07b. Varistor (VR1) (Optional) (alternate)

THINKING ELECTRONIC INDUSTRIAL CO LTDE314979

TVR10471-D, TVR14471-D, TVR10471, TVR14471,


VZCA2 UL

07c. Varistor (VR1) (Optional) (Alternate)

JOYIN CO LTDE325508

10S471K, 14S471K, 10N471K, 14N471K


VZCA2 UL



07d. Varistor (VR1) (Optional) (Alternate)

CERGLASS MFG INCE317616

10D471K 14D471K Rated 300Vac minimum,minimum 85 degree C, min. V-1 coating.

VZCA2 UL

07e. Varistor (VR1) (Optional) (Alternate)

GUANGDONG SOUTH HONGMING ELECTRONIC SCIENCE & TECHNOLOGY CO LTDE321851

ZVR10D471 ZVR14D471


VZCA2 UL

07f. Varistor (VR1) (Optional) (Alternate)

JYH HSU (JEC) ELECTRONICS LTDE486000

10D471K, 14D471K Rated 300Vac minimum,minimum 85 degree C, min. V-1 coating.

VZCA2 UL

08. X-Capacitor (CX1) (Optional)

SHENZHEN SURONG CAPACITORS CO LTDE314875

MPX/MKP Rated maximum 0.33uF, minimum 250V, minimum 100 degree C, X2 type.

FOWX2 UL

08a. X-Capacitor (CX1) (Optional) (Alternate)

SHENZHEN YIMANFENG SCIENCE AND TECHNOLOGY CO LTDE315567

MPX/MKP Rated maximum 0.33uF, minimum 250V, minimum 100 degree C, X2 type.

FOWX2 UL

08b. X-Capacitor (CX1) (Optional) (Alternate)

GUANGDONG FENGMING ELECTRONIC TECH CO LTDE345487

MKP-X2 Rated maximum 0.33uF, minimum 250V, minimum 105 degree C, X2 type.

FOWX2 UL

08c. X-Capacitor (CX1) (Optional) (Alternate)

SHANTOU HIGH-NEW TECHNOLOGY DEVELOPMNT ZONE SONGTIAN ENTERPRISE CO LTDE208107

MPX Rated maximum 0.33uF, minimum 250V, 110 degree C, X2 type.

FOWX2 UL



08d. X-Capacitor (CX1) (Optional) (Alternate)

JIMSON ELECTRONICS CO LTDE152288

MKP Rated maximum 0.33uF, minimum 250V, 100 degree C, X2 type.

FOWX2 UL

08e. X-Capacitor (CX1) (Optional) (Alternate)

HSUAN TAI ELECTRONICS CO LTDE199069

MCY Series Rated maximum 0.33uF, minimum 250V, 110 degree C, X2 type.

FOWX2 UL

08f. X-Capacitor (CX1) (Optional) (Alternate)

SHENZHEN HAOTIAN ELECTRONIC CO LTDE326483


FOWX2 UL

08g. X-Capacitor (CX1) (Optional) (Alternate)



FOWX2 UL

08h. X-Capacitor (CX1) (Optional) (Alternate)

CHENG TUNG INDUSTRIAL CO LTDE193049

CTX Rated maximum 0.33uF, minimum 250V, 105 degree C, X2 type.

FOWX2 UL

08i. X-Capacitor (CX1) (Optional) (Alternate)

STRONG COMPONENTSCO LTDE230903


FOWX2 UL

09. Bleeder resistors (R1A, R1B, R1C, R1D)

-- -- Each rated maximum 3.9M ohm, minimum 1/4W

-- --

10. Bridge diode (BD1) -- -- Rated minimum 1 A , minimum 600 V

-- --

11. Electrolytic-Capacitor (CE1)

-- -- Minimum 400V, 68-220uF, Minimum 105 degree C.

-- --

12. Transistor (Q2) -- -- Minimum 600 V, minimum 1A

-- --



13. Current Limiting Resistor (R2)

-- -- Rated 0.05-10ohm, minimum 1/4W

-- --

14. Inductor (LF1) (optional)

-- -- 130 degree C. See supplementary 4-04 for details.

-- -- 04-04

14-1. Inductor (LF1) -Core

-- -- Ferrite, measured 12mm by 6mm by 4mm approximately.

-- --

14-2. Inductor (LF1) -N1 winding

Interchangeable Interchangeable minimum 130 degree C

OBMW2 UL

14-3. Inductor (LF1) –N2 winding

Interchangeable Interchangeable Triple insulation Wire, 130 degree C

OBJT2 UL



-- -- 04-05



-- --

15-2. Inductor (LF2) - winding


OBMW2 UL



-- -- 04-06


-- -- Ferrite, measured 17.7mm by 9mm by 6.5mm approximately.

-- --

16-2. Inductor (LF3) - winding


OBMW2 UL

17. Inductor (L1) -- -- 130 degree C. See supplementary 4-07 for details.

-- -- 04-07



17-1. Inductor (L1) -Core


-- --

17-2. Inductor (L1) - winding


OBMW2 UL

17-3. Inductor (L1) - tape


OANZ2 UL

17-4. Inductor (L1) -varnish

Interchangeable Interchangeable Minimum 130 degree C

OBOR2 UL

17-5. Inductor (L1) -bobbin

SUMITOMO BAKELITE CO LTDE41429

PM-9820 Phenolic, rated V-0, minimum 150 degree C, minimum 0.45 mm thick.

QMFZ2 UL

18. Photo Coupler (OP1,OP2)

BRIGHT LED ELECTRONICS CORPE236324

BPC-817XXXXXX* Double-protection. Providing 5000 Vac isolation. 100 degree C

FPQU2 UL

18a. Photo Coupler (OP1,OP2) (Alternate)

COSMO ELECTRONICS CORPE169586

KPC817X#, K1010X*,817X#

Double-protection. Providing 5000 Vac isolation. 100 degree C

FPQU2 UL

18b. Photo Coupler (OP1,OP2) (Alternate)

EVERLIGHT ELECTRONICS CO LTDE214129

EL817, HS817, 817 Double-protection. Providing 5000 Vac isolation. 110 degree C

FPQU2 UL

18c. Photo Coupler (OP1,OP2) (Alternate)

LITE-ON TECHNOLOGY CORPE113898

LTV-817, 817 Double-protection. Providing 5300 Vac isolation. 110 degree C

FPQU2 UL

18d. Photo Coupler (OP1,OP2) (Alternate)

SHENZHEN ORIENT COMPONENTS CO LTDE323844

ORPC-817 Double-protection. Providing 5000 Vac isolation. 110 degree C

FPQU2 UL



18e. Photo Coupler (OP1,OP2) (Alternate)

CT MICROELECTRONICS FAR EAST LTDE364000

CT817 Double-protection. Providing 5000 Vac isolation. 100 degree C

FPQU2 UL

19. Y-Capacitor (CY3) (Optional)


F Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

19a. Y-Capacitor (CY3) (Optional) (Alternate)


JD Series Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

19b. Y-Capacitor (CY3) (Optional) (Alternate)


CY Series Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

19c. Y-Capacitor (CY3) (Optional) (Alternate)


CD Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

19d. Y-Capacitor (CY3) (Optional) (Alternate)

JYH CHUNG ELECTRONICS CO LTDE187963

JD Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

19e. Y-Capacitor (CY3) (Optional) (Alternate)


HT, HTC Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

19f. Y-Capacitor (CY3) (Optional) (Alternate)

NAN JING YUYUE ELECTRONICS CO LTDE237728

CT7 Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL



20. Y-Capacitor (CY4,CY5) (Interchangeable with CY3) (Optional)


F Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

20a. Y-Capacitor (CY4,CY5) (Interchangeable with CY3) (Optional) (Alternate)


JD Series Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

20b. Y-Capacitor (CY4,CY5 (Interchangeable with CY3) (Optional) (Alternate)


CY Series Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

20c. Y-Capacitor (CY4,CY5) (Interchangeable with CY3) (Optional) (Alternate)


CD Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

20d. Y-Capacitor (CY4,CY5) (Interchangeable with CY3) (Optional) (Alternate)


JD Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

20e. Y-Capacitor (CY4,CY5) (Interchangeable with CY3) (Optional) (Alternate)


HT, HTC Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL

20f. Y-Capacitor (CY4,CY5) (Interchangeable with CY3) (Optional) (Alternate)


CT7 Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 type.

FOWX2 UL



21. Y-Capacitor (CY1,CY2) (Optional)


F Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 or Y2 type.

FOWX2 UL

21a. Y-Capacitor (CY1,CY2,) (Optional) (Alternate)


JD Series Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 or Y2 type.

FOWX2 UL

21b. Y-Capacitor (CY1,CY2) (Optional) (Alternate)


CY Series Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 or Y2 type.

FOWX2 UL

21c. Y-Capacitor (CY1,CY2 (Optional) (Alternate)


CD Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 or Y2 type.

FOWX2 UL

21d. Y-Capacitor (CY1,CY2) (Optional) (Alternate)


JD Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 or Y2 type.

FOWX2 UL

21e. Y-Capacitor (CY1,CY2) (Optional) (Alternate)


HT, HTC Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 or Y2 type.

FOWX2 UL

21f. Y-Capacitor (CY1,CY2) (Optional) (Alternate)


CT7 Rated maximum 2200pF, minimum 250V, 125 degree C, Y1 or Y2 type.

FOWX2 UL

22. Transformer (T1) (for output voltage: 9.0-15.0V)

SHENZHEN HE SHENG LONG ELECTRONICS CO LTD

PS96A9-15V Class B, See supplementary 4-01 for details.

-- -- 04-01



22a. Transformer (T1) (for output voltage: 18.0-24.0V)



-- -- 04-02

22b. Transformer (T1) (for output voltage: 32.0-48.0V)



-- -- 04-03

22-1. Transformer (T1) -Insulation System

SHENZHEN HE SHENG LONG ELECTRONICS CO LTDE314639

B88 Class B OBJY2 UL

22-2. Transformer (T1) -Core

-- -- Ferrite, measured 32.0mm by 22.0 mm by 21.0 mm approximately.

-- --

22-3. Transformer (T1) - Coil

Interchangeable MW 28, MW 75, MW 79, MW 80, MW 82, MW 83

Minimum 130 degree C

OBMW2 UL

22-4. Transformer (T1) - Bobbin

SUMITOMO BAKELITE CO LTDE41429

PM-9820 Phenolic, rated V-0, minimum 150 degree C, minimum 0.45 mm thick.

QMFZ2 UL

22-5. Transformer (T1) – Triple insulation Wire

FURUKAWA ELECTRIC CO LTD E206440

TEX-E 130 degree C OBJT2 UL

22-5a. Transformer (T1) – Triple insulation Wire (Alternate)

TOTOKU ELECTRIC CO LTD E166483

TIW-2 130 degree C OBJT2 UL

22-5b. Transformer (T1) – Triple insulation Wire (Alternate)

TOTOKU ELECTRIC CO LTD E166483

TIW-3 155 degree C OBJT2 UL

22-6. Transformer (T1) - Insulation Tape

P LEO & CO LTDE126174

1P801, 1P802 130 degree C OANZ2 UL

22-7. Transformer (T1) – Varnish

HITACHI CHEMICAL CO LTD E72979

WP-2952F-2G 130 degree C OBOR2 UL



22-8. Transformer (T1) - Tubing

GREAT HOLDING INDUSTRIAL CO LTDE156256

TFL, TFT, TFS 200 degree C, VW-1 YDPU2 UL

22-8a. Transformer (T1) - Tubing (Alternate)


2T-TFL, 2T-TFT, 2T-TFS

200 degree C, VW-1 YDPU2 UL

23. Heat Sink (HS1) Interchangeable Interchangeable Aluminum, secured to Q1, Q2 by screw and soldered to PCB. See supplement 7-03 for detail.

-- -- 07-03

24. Heat Sink (HS2) Interchangeable Interchangeable Aluminum, secured to Q3, Q4 by screw and soldered to PCB. See supplement 7-04 for detail.

-- -- 07-04

25. Shielding case (HS3)

Interchangeable Interchangeable See supplement 7-05 for detail.

-- -- 07-05

26. Shielding case (HS4)

Interchangeable Interchangeable See supplement 7-06 for detail.

-- -- 07-06

27. Mylar sheet ITW ELECTRONICS COMPONENTS/ PRODUCTS (SHANGHAI) CO LTDE256266

FORMEX-(a)(d)(f1) Minimum V-2, minimum thickness: 0,4 mm. See supplement 7-07 for detail.

QMFZ2 UL 07-07

27a. Mylar sheet (Alternate)

SHENZHEN TEEBON PLASTICS TECHNOLE357515

TB-FR65 Minimum V-2, minimum thickness: 0,4 mm. See supplement 7-07 for detail.

QMFZ2 UL 7-07



27b. Mylar sheet (Alternate)

SHENZHEN BORNSUN INDUSTRIAL CO LTDE256822

BN-PH Minimum V-2, minimum thickness: 0,4 mm. See supplement 7-07 for detail.

QMFZ2 UL 7-07

27c. Mylar sheet (Alternate)

CHANGZHOU BBETTER FILM TECHNOLOGIES CO LTDE357084

FRV17035 Minimum V-2, minimum thickness: 0,4 mm. See supplement 7-07 for detail.

QMFZ2 UL 7-07

27d. Mylar sheet (Alternate)

KUNSHAN DOBESTY OPTOELECTRONIC MATERIALS CO LTDE339070

PC9842B/W Minimum V-2, minimum thickness: 0,4 mm. See supplement 7-07 for detail.

QMFZ2 UL 7-07

28. Insulation tape for Heatsink


1P801, 1P802 130 degree C OANZ2 UL

28a. Insulation tape for Heatsink (Alternate)

JINGJIANG YAHUA PRESSURE SENSITIVE GLUE CO LTD E165111

PZ* (b), CT* (b)(g) 130 degree C OANZ2 UL

28b. Insulation tape for Heatsink (Alternate)

DUCK SUNG HITECH CO LTDE105147

DTS-280 130 degree C OANZ2 UL

29. Output Cord Interchangeable Interchangeable Minimum 60V, minimum 80 degree C, minimum 18AWG, marked VW-1 or FT-1. Soldered on PCB with additional glue fixing. Jacket, suitable for external use.

AVLV2 UL



30. Strain Relief Interchangeable Interchangeable Minimum. V-1. See supplement 7-08 for detail.

QMFZ2 UL 07-08

31. Output connector Interchangeable Interchangeable Minimum. V-1. QMFZ2 UL

32. Glue Interchangeable Interchangeable Minimum V-2 QMFZ2 UL



Enclosures

Type Supplement Id Description

Miscellaneous 07-01 Model List

Miscellaneous 07-02 Enclosure drawing

Miscellaneous 07-03 Heat Sink (HS1) drawing

Miscellaneous 07-04 Heat Sink (HS2) drawing

Miscellaneous 07-05 Shielding case (HS3) drawing

Miscellaneous 07-06 Shielding case (HS4) drawing

Miscellaneous 07-07 Mylar sheet drawing

Miscellaneous 07-08 Strain Relief drawing

Diagrams 04-01 Transformer (T1) specification (for output voltage: 9.0-15.0V)



Diagrams 04-04 Inductor (LF1) specification



Diagrams 04-07 Inductor (L1) specification

Photographs 03-01 Overall view - 1

Photographs 03-02 Overall view - 2

Photographs 03-03 Internal view - 1




Photographs 03-07 Power board, top (with CY3)

Photographs 03-08 Power board, bottom

Photographs 03-09 Power board, top (with CY4, CY5)

Photographs 03-10 Overall view (alternate)

Photographs 03-11 Overall view (alternate 2)

Photographs 03-12 Heat sink (HS2) view


File E302944 PHO-01


File E302944 PHO-02


File E302944 PHO-03


File E302944 PHO-04


File E302944 PHO-05


File E302944 PHO-06


File E302944 PHO-07


File E302944 PHO-08


File E302944 PHO-09


File E302944 PHO-10


File E302944 PHO-11


File E302944 DIA-01


File E302944 DIA-02


File E302944 DIA-03


File E302944 DIA-04


File E302944 DIA-05


File E302944 DIA-06


File E302944 DIA-07


File E302944 MIS-01


File E302944 MIS-02


File E302944 MIS-03


File E302944 MIS-04


File E302944 MIS-05


File E302944 MIS-06


File E302944 MIS-07


File E302944 MIS-08


Issue Date: 2017-07-16 Page 1 of 2 Report Reference # E302944-A6001-UL

Test Record No. 1

- The manufacturer submitted representative production samples of Switching Adapter, Model PS96AxxxYyyyyM (For variables xxx and yyyy refer to Enclosure 7-01� for investigation.

- Testing was not considered necessary based upon previous evaluation under the CB Scheme. The CB Test Certificate No. DK-64973-UL dated 2017-07-06 and Report Ref. No. 17PNC05041 04001 dated 2017-07-06 were prepared by UL (Demko), Borupvang 5A DK-2750 Ballerup, DENMARK.

- Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL.

The following tests were waived:

Test Rationale for WaivingSTEADY FORCE TEST, 250 N (4.4.4.2, ANNEX T.5)IMPACT TEST (4.4.4.4, ANNEX T.6)STRESS RELIEF TEST (4.4.4.7, ANNEX T.8)CLASSIFICATION OF ELECTRICAL ENERGY SOURCES (5.2, 5.7)MAXIMUM OPERATING TEMPERATURE FOR MATERIALS, COMPONENTS AND SYSTEMS (5.4.1.4, Annex B.2)DETERMINATION OF WORKING VOLTAGE (5.4.1.8)ANTENNA TERMINAL INSULATION – VOLTAGE SURGE (5.4.5, G.10.3.2)HUMIDITY CONDITIONING (5.4.8)ELECTRIC STRENGTH TEST (5.4.9)SAFEGUARDS AGAINST CAPACITOR DISCHARGE AFTER DISCONNECTION OF A CAPACITOR (5.5.2.2)PROSPECTIVE TOUCH VOLTAGE AND TOUCH CURRENT MEASUREMENT (5.7)POWER MEASUREMENTS (6.2.2.2, 6.2.2.3)INPUT TEST: SINGLE PHASE (B.2.5)SIMULATED ABNORMAL OPERATING CONDITIONS (B.3)SIMULATED SINGLE FAULT CONDITIONS (B.4)TEST FOR THE PERMANENCE OF MARKINGS (ANNEX F.3.10)TRANSFORMER OVERLOAD (ANNEX G.5.3.3)STRAIN RELIEF TEST (ANNEX G.7.3.2)STEADY FORCE TEST, 10 N (ANNEX T.2 , 5.4.2.6, 5.4.3.2, G.15.3.6)



Test Record No. 2

Only changed correct volume number.



IEC62368_1B

ENERGY SOURCE IDENTIFICATION AND CLASSIFICATION TABLE:

(Note 1: Identify the following six (6) energy source forms based on the origin of the energy.)(Note 2: The identified classification e.g., ES2, TS1, should be with respect to its ability to cause pain or injury on the body or its ability to ignite a combustible material. Any energy source can be declared Class 3 as a worse case classification e.g. PS3, ES3.

Electrically-caused injury (Clause 5):(Note: Identify type of source, list sub-assembly or circuit designation and corresponding energy source classification)Example: +5 V dc input ES1

Source of electrical energy Corresponding classification (ES)

All internal circuits except for output circuits ES3

X capacitor connected between L and N ES3

Y capacitor connected between L and PE ES1

Y capacitor connected between N and PE ES1

Output circuit ES1

Electrically-caused fire (Clause 6):(Note: List sub-assembly or circuit designation and corresponding energy source classification)Example: Battery pack (maximum 85 watts): PS2

Source of power or PIS Corresponding classification (PS)

All internal circuits PS3, Arching PIS, Resistive PIS

Output circuit PS3

Injury caused by hazardous substances (Clause 7)(Note: Specify hazardous chemicals, whether produces ozone or other chemical construction not addressed as part of the component evaluation.)Example: Liquid in filled component Glycol

Source of hazardous substances Corresponding chemical

N/A N/A

Mechanically-caused injury (Clause 8)(Note: List moving part(s), fan, special installations, etc. & corresponding MS classification based on Table 35.)Example: Wall mount unit MS2

Source of kinetic/mechanical energy Corresponding classification (MS)

Mass of the unit MS1

Edges and corners of enclosure MS1

Thermal burn injury (Clause 9)(Note: Identify the surface or support, and corresponding energy source classification based on type of part, location, operating temperature and contact time in Table 38.)Example: Hand-held scanner – thermoplastic enclosure TS1

Source of thermal energy Corresponding classification (TS)

Plastic enclosure TS1

Radiation (Clause 10)(Note: List the types of radiation present in the product and the corresponding energy source classification.)Example: DVD – Class 1 Laser Product RS1

Type of radiation Corresponding classification (RS)

LED indicator RS1

File E302944 01-ATT-01



IEC62368_1B

ENERGY SOURCE DIAGRAM

Indicate which energy sources are included in the energy source diagram. Insert diagram below

ES PS MS TS RS

File E302944 01-ATT-02


ul test report and procedure-pzbfns.pdf · ul test report and procedure standard: ul 62368-1, 2nd...

Documents