ultra filtered grease

5

Upload: marcos-bustamante

Post on 05-Oct-2015

220 views

Category:

Documents


0 download

DESCRIPTION

grasas especiales filtradas.

TRANSCRIPT

  • BardenUltraFilteredGreaseForPrecisionBearingLubricationBarden Ultra Filtered Greases are engineered for use in precision bearings and can helpyou achieve optimal performance ttom your precision bearings. Five grades of petroleumand ester-based greases are available in 30cc precision-calibrated dispensers. To order,contact your Authorized Barden Distributor, or call Barden for details.

    Each kit includes:

    .30cc of grease in calibrated cartridge.Screw-on applicator tip

    .Replaceable storage caps

    G-75Arcanol

    L-75

    G-46Kluber

    IsoflexNBU-15

    G-42NYE

    Rheolube 350-SBG-2

    G-29Exxon

    Andok260

    G-12Chevron

    SRI-2

    .Plunger.Detailed instruction sheet

    . Fill quantity guidelines

    Base Oil: PAO/Ester; Thickener: Polyurea; Opr. Temp. Range: -60Fto+250F; Max dN*: 1,200,000; Type: Channeling; Additives: Oxidation,Corrosion, Antiwear, EP; Oil Viscosity: @1O0F:22cSt; @21OF:5.0cSt; N.LG.L: Grade #3

    Comments: A stiff, smooth-running grease, good for high speed verticalapplications - instrument, aircraft and spindle - where low greasemigration is critical. Good resistance to water washout and corrosion.

    Base Oil: Ester; Thickener: Barium Complex; Opr. Temp Range: -40Fto+250F; Max dN*: 750,000; Type: Non-Channeling; Additives: Oxidation,Corrosion, E.P.; Oil VISCosity:@1O0F:23cSt; @21OF:4.7cSt; N.L.G.L:Grade #2

    Comments: Spindle bearing grease for maximum speeds, moderateloads at normal shop temperatures. Good resistance to water washoutand corrosion.

    Base Oil: Petroleum; Thickener: Sodium/Calcium; Opr. Temp Range:-30F to +250F; Max dN*: 650,000; Type: Channeling; Additives:Oxidation, Corrosion; Oil Viscosity: @1O0F: 65cSt; @21OF: 7cSt;N.L.G.I.: Grade #2

    Comments: Spindle bearing grease for normal shop temperaturesand maximum life at high speeds and loads. Provides good protectionagainst &etting corrosion. Water resistant.

    Base Oil: Petroleum; Thickener: Sodium Soap; Opr. Temp Range:-20F to +250F; Max dN*: 650,000; Type: Channeling; Additives:Rust, Oxidation; Oil VIScosity:@1O0F:119cSt; @21OF:19c5t;N.L.G.I.: Grade #2

    Comments: A moderately stiff, smooth-running general purposehigh speed grease - ideal for instrument, aircraft and spindle bearingapplications - where low grease migration is critical. Not water resistant.

    Base Oil: Petroleum; Thickener: Poly Urea; Opr. Temp Range: -20Fto +300F; Max dN*: 400,000; Type: Non-Channeling; Additives:Oxidation, Corrosion (Super rust inhibited); Oil Viscosity: @1O0F:129cSt; @21OF:12.2cSt; N.L.G.L: Grade #2

    Comments: A general purpose, moderate speed, water resistant grease.

    *dN = Bearing bore in mm multiplied by speed in RPM.

    ()THE BARDEN CORPORATIONP.O. Box 2449

    200 Park Avenue, Danbury,CT 06813-2449@ (800) 243-1060 FAX: (203) 744-3756

    Now ISO9001 Approved

    CalibrationMarks~

    30cc Grease

    Cartridge----.

    Plunger ----.

    Shown Actual Size.

  • Grease Quantities for Super Precision Spindle BearingsAngular Contact Series (H) (B) (J)

    Size Series 1900 Series 100 Series 200 Series 300Number** Series 2900 Series 2100 Series 2200 Series 2300

    00 . . . . . . . . . . .25 cc . . . . . . .25 cc . . . . . . . .50 cc . . . . . . . . . . . . .01 . . . . . . . . . . . . . . . . . . . . . . .25 cc . . . . . . . .50 cc . . . . . . . . . . . . .02 . . . . . . . . . . .25 cc . . . . . . .50 cc . . . . . . . 1.00 cc . . . . . 1.00 cc03 . . . . . . . . . . .25 cc . . . . . . .50 cc . . . . . . . 1.00 cc . . . . . 1.50 cc04 . . . . . . . . . . .50 cc . . . . . . 1.00 cc . . . . . . . 1.50 cc . . . . . 2.00 cc05 . . . . . . . . . . .50 cc . . . . . . 1.00 cc . . . . . . . 2.00 cc . . . . . 3.00 cc06 . . . . . . . . . . .50 cc . . . . . . 1.50 cc . . . . . . . 3.50 cc . . . . . 3.50 cc07 . . . . . . . . . . 1.00 cc . . . . . . 2.00 cc . . . . . . . 3.50 cc . . . . . 7.00 cc08 . . . . . . . . . . 1.50 cc . . . . . . 2.50 cc . . . . . . . 5.00 cc . . . . . 10.00 cc09 . . . . . . . . . . . . . . . . . . . . . . 3.50 cc . . . . . . . 6.00 cc . . . . . 12.00 cc10 . . . . . . . . . . 1.50 cc . . . . . . 3.50 cc . . . . . . . 7.00 cc . . . . . 16.00 cc11 . . . . . . . . . . 2.50 cc . . . . . . 5.50 cc . . . . . . . 9.00 cc . . . . . 16.00 cc12 . . . . . . . . . . . . . . . . . . . . . . 6.00 cc . . . . . . . 11.00 cc . . . . . 23.00 cc13 . . . . . . . . . . 3.00 cc . . . . . . 7.00 cc . . . . . . . 11.00 cc . . . . . 28.00 cc14 . . . . . . . . . . . . . . . . . . . . . . 9.00 cc . . . . . . . 14.00 cc . . . . . . . . . . . . .15 . . . . . . . . . . . . . . . . . . . . . . 9.00 cc . . . . . . . 14.00 cc . . . . . 41.00 cc*16 . . . . . . . . . . . . . . . . . . . . . . 11.00 cc . . . . . . . 18.00 cc . . . . . . . . . . . . .17 . . . . . . . . . . . . . . . . . . . . . . 12.00 cc . . . . . . . 24.00 cc . . . . . 54.00 cc*18 . . . . . . . . . . 8.00 cc . . . . . . 16.00 cc . . . . . . . 52.00 cc* . . . . 60.00 cc*19 . . . . . . . . . . . . . . . . . . . . . . 16.00 cc . . . . . . . . . . . . . . . . . . . 77.00 cc*20 . . . . . . . . . . . . . . . . . . . . . . 17.00 cc . . . . . . 37.00 cc* . . . . . . . . . . . .21 . . . . . . . . . . . . . . . . . . . . . . 21.00 cc . . . . . . . . . . . . . . . . . . . . . . . . . . .22 . . . . . . . . . . . . . . . . . . . . . . 25.00 cc . . . . . . . . . . . . . . . . . . . 110.00 cc*24 . . . . . . . . . . . . . . . . . . . . . . 27.00 cc . . . . . . . . . . . . . . . . . . . . . . . . . . .26 . . . . . . . . . . . . . . . . . . . . . . 46.00 cc* . . . . . . . . . . . . . . . . . . . . . . . . . .28 . . . . . . . . . . . . . . . . . . . . . . 47.00 cc* . . . . . . . . . . . . . . . . . . . . . . . . . .30 . . . . . . . . . . . . . . . . . . . . . . 53.00 cc* . . . . . . . . . . . . . . . . . . . . . . . . . .

    ** Multiple 30 cc syringes required to lube one bearing.** Size Number is the last two digits of the numeric bearing number. Example: 208 HDL Series 200. Size Number 08

    requires lube quantity of 5.00 cc.

    Consult Barden Product Engineering for assistance with specific lubrication applications.

    12/97

    THE BARDEN CORPORATIONP.O. Box 2449200 Park Avenue, Danbury, CT 06813-2449(800) 243-1060 FAX: (203) 744-3756

  • Syringe Assembly

    Greasing Methods Verify bearing series and size number. Select appropriate grease quantity from chart (refer to bearing series and size number). Inject grease into bearing from direction noted by arrow below.* Grease is to be evenly and symmetrically distributed circumferentially within bearings. Bearings are to be rotated 1/2 turn minimum after application of grease. Grease must generally coat the balls and internal surfaces of the bearing.

    INSTRUCTIONS

    *Note: on B typebearings, carefullyremove inner ring andapply grease to balls asindicated by arrow.