ultracool3d-corporate-r1

22
Jayesh Modi Managing Director, Ultra Cool 3D [email protected] +61 410 095 160 REDUCING CYCLE TIMES AND IMPROVING PART QUALITY

Upload: margarit-misirdzhiev

Post on 18-Mar-2016

213 views

Category:

Documents


0 download

DESCRIPTION

http://ultracool3d.ehubspot.com/wp-content/uploads/2011/10/UltraCool3D-Corporate-R1.pdf

TRANSCRIPT

Page 1: UltraCool3D-Corporate-R1

Jayesh Modi

Managing Director, Ultra Cool 3D

[email protected]

+61 410 095 160

REDUCING CYCLE TIMES

AND IMPROVING PART QUALITY

Page 2: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

• Most plant engineers have spent endless hours in trying to control Warpage.

• Many hours were spent on meeting tolerances of part.

• Even after all efforts, residual stress in parts made part unacceptable in field service,

can you afford brand damage?

Warpage, Long Cycle Times, Tolerances

Page 3: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Cas

e 1

Simplified cooling causing heat build-up

50% cycle time reduction target

• Very high temperature gradient

• 40 sec cycle time

• High warpage

Development Possibilities – Automotive Siren

Page 4: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Cas

e 2

Simplified cooling causing heat build-up

40% cycle time reduction target

• Very high temperature gradient

• 50 sec cycle time

• High warpage

Development Possibilities – Automotive ECU

Page 5: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Limitation of cooling in

tool shows up instantly

on a simple IR image.

Far more effective than

single point pyrometers

used.

Cas

e 3

Development Possibilities - Mirror

Page 6: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Excessive temperature variation, long

cycle time, warpage.

Cas

e 4

Development Possibilities – Air Intake Manifold

Page 7: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Husky Analysis, 12.6 sec. Cycle time

Rigid Packaging Benchmarking Study C

ase

5

(Source: Husky Seminar Notes)

Page 8: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Blocked cooling channel, product quality issues.

Rigid Packaging Tool Diagnostic C

ase

6

Page 9: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Ultra Cool 3D’s rigorous design methodology aims to

deliver a remarkable thermal response. With

proprietary algorithm based on published research

from MIT, UltraCool3D will help control

- Warpage

- Weld lines

- Weight

- Cycle time

- Unlock “Hidden Capacity”

Cost Quality

Realize Those Profits

Page 10: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

• Substantially reduce cycle times

• Improve part quality

• Reduce molded-in stresses and warpage

• Control process drift

• Shorten new tool commissioning time

• Sustainability

• Reduced energy & material consumption

• Get ready to minimize your carbon tax

Solution UltraCool3D

Page 11: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Finished poppet

3D cooling on poppet head.

Very small temperature differential over entire part, leading to

great warpage control and shortest possible cycle time.

Project- Lid

Page 12: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

3D Conformal Cooling

Conventional cooling

30% Cycle time reduction target.

Project- Bezel

Page 13: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Project- “Rib Cage” 3D Cooling

Page 14: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

2o C temperature differential over entire part !

Flatness achieved 40 Micron !!

Project- Ultra Precision Moulding

Page 15: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

In addition to part thickness….

Distance- cooling channel maximum distance to mold wall.

Distance- cooling channel minimum distance to mold wall.

Distance- cooling channel pitch distance.

What Affects My Cycle Times?

Page 16: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

54 % extra cycle time

Profit lost ! 23

o C differential

Warpage !

Why Does It Matter?

Page 17: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Process drift (100+ shots to stabilise)

Poor Quality !

23o C differential-

Warpage

Reversal from

-7 o C to + 23

o C Un-

stable tool

-7 o C

+ 23o C

Why Does It Matter?

Page 18: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

o Based on algorithm developed at MIT.

o Design for six different criteria- uniform cooling of part, part eject temperatures,

part mid plane temperature, mold deflection, coolant temp., pressure drop.

o This ensures- shortest cycle times with uniform cooling of parts ensuring best

possible crystallisation, minimal residual stress and warpage.

o We can help- gap analysis, tooling specification, design review, tooling

manufacture.

Proprietary Software

Page 19: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Proprietary Software At Your Service

Page 20: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

• Our technology is developed in Australia and analysis carried out

• at CSIRO and Dept. of Defense facilities by use of advanced scanning electron

microscopes.

Quality Built-In

Page 21: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

At UltraCool3D we are dedicated to bringing innovative technological solutions to plastics

moulding industry in a manner that will set new standards of quality and service. We, in our

humble way, will help reduce carbon footprint that our industry leaves behind. This will lead

to more profit for our customers and have lasting impact on our planet.

Jayesh Modi Managing Director Ultra Cool 3D

Mission Statement

Page 22: UltraCool3D-Corporate-R1

Confidential, Patent Pending © Ultra Cool 3D 2011 www.ultracool3d.com

Confidentiality Note: Intellectual property protection is sought for various stages of our products, they are protected under various patents in various stages of application.

No part of this presentation or technologies described herein may be copied, reproduced without express written permission of its proprietors.

Good Cooling is Not Optional…