underscreed sound insulation system for concrete …
TRANSCRIPT
Made from recycledwaste rubber
tough puncture resistant underscreed resilient layer
‘easy fit’ self adhesive fold-line cut flanking strip
IIssooeeddggee 66//226600self adhesive flankingsound insulation strip.
Min. 300Kg/m2
concrete floor
Screed to suit*
*including proprietary screeds
66mmmm IIssoorruubbbbeerrBBaassee
MF Ceiling
IIssoossoonniicc CCeeiilliinnggSSttrriippself adhesive ceilingperimeter seal strip
TTMMIIssoorruubbbbeerrBBaassee
6mm Isorubber Base-Isoedge-
TTMM
IIssooEEddggee
Thermal Economics Ltd Thermal House 8 Cardiff Road Luton Bedfordshire LU1 1PP
Tel:01582 450814 Fax:01582 429305 E-mail:[email protected] Web:www.thermal-economics.co.uk
▲
▲
▲
▲
▲
Ideal solution for BREEAMprojects, site test resultsconsistently exceed buildingregulation requirements
A dense, tough recycledrubber product
Virtually no short or long termcompression deteriorationunder load
A high acoustic performance
Can be used with the fullrange of screed and flankingcavity wall constructions
is a purpose made flankingsound insulation strip thatprovides a robust solution forthe difficult edge details.(see reverse for details)
The Isosonic Basefloor
system is an under
screed acoustic
insulation and ceiling
treatment for pre-cast
plank, in-situ concrete,
steel composite and
beam & block floors.
Suitable for use in new-
build and refurbishment
applications.
For further information and detailed installation manual
contact Thermal Economics Technical Department on:
01582 544255 or visit www.thermal-economics.co.uk
UNDERSCREED SOUND INSULATION SYSTEMFOR CONCRETE FLOORS
Isorubber Base is a durable, thin but dense materialwhich unlike soft cellular polymer products undergoesvirtually no short or long term compression undernormal floor loads.
This provides assurance that the full initial acousticperformance is maintained throughout the life ofthe building.
6mm Isorubber Base
Density 600 kg/m3 +- 30 kg/m3 +
- 65 kg/m3
Reclaimed Polyurethane FoamPolyethylene Foam
Full installationinstructions areprovided by the‘Isosonic BasefloorInstallation Guide’on our website.
flanking insulation strip: engineered for the purpose
Faulty installation of the floorperimeter is the single biggestcause of sound test failures inscreeded floors.
Corners and pipe penetrationsrequire a skillful treatment forwhich a simple ‘monolithic’
turn up of the underscreedmat is inadequate.
Isoedge is a purpose madeperimeter insulation strip thatprovides an easy robustmethod for the treatment ofthese problematic details.
Please visit our website for the full range of Thermal and Sound Insulation products atwww.thermal-economics.co.uk
©Thermal Economics Ltd. Draft 7 (Issue 1) Apr 2013
6mm10mm 10mm
Self adhesive strip
Precut fold lines
Isoedge
Internal and external corners
Pipe penetration
TTMMIIssooEEddggee
Product Properties and Characteristics-IIssoorruubbbbeerr BBaassee ccoonnttaaiinnss oovveerr 9900%% rreeccyycclleedd rruubbbbeerr,,pprroovviiddiinngg ssuussttaaiinnaabbllee lloonngg tteerrmm ppeerrffoorrmmaannccee..
TTMMIIssoorruubbbbeerrBBaassee
UNDERSCREED SOUND INSULATION SYSTEMFOR CONCRETE FLOORS