Tender Ref. 1500 1869/ERA Appendix 1

I. General Background Information and Aim of the Project:The project addresses the socio-economics priorities of the Diwaniya Governorate with a focus on community empowerment and the promotion of income-generating activities/job creation. It aims at increasing the capability of rural and urban communities in the region toengage in viable non-farming enterprises, reducing their dependency on relief aid and helping them to move towards sustainable livelihood.

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

I. Equipment, parts, supplies

A1

Centre Lathe with ToolingScrew cutting precision gap bed lathe manufactured to DIN 8606 with oil immersed enclosed transmission (oil included)Distance between centres 1000mmCentre height 165mmMax swing over bed 330mmMax swing over saddle 198mmMax swing in gap 476mmLength of gap 115mmWidth of bed 187mmSpindle bore 38mmSpindle nose Camlock D 1–4Spindle taper MT 5Tailstock taper MT 3No of spindle speeds 8Range of spindle speeds 70–2000 rpmLead screw diameter/pitch 22mm/3mmMetric threads 0.4–7mmImperial threads 4–56 tpiMotor 3 phase, 400V, 1.5kwNet weight 600kg

2

Technical specifications for purchase of equipment and supplies for project: FB/IRQ/07/001 Requ. 15001869

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

PTC/AGR Page 1 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

Accessories and consumables to include:3 jaw chuck 160mm4 jaw chuck 200mmFace plate 320mmFixed steadyTravelling steadyElectrically interlocked chuck guard4 Way Indexing toolpost standRear splash guardSpindle foot brakeThread dial indicatorToolbox with service toolsSiemens electricsComplete coolant system, including 10 litres of coolant concentrateLow voltage lightTaper turning attachmentRevolving tailstock taper 3 MTOil gun

PTC/AGR Page 2 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

Each lathe complete with the following tools:1. Cutting tool set HM 10mm, 7 pieces with reversible HM carbide tips. In wooden box. ISO tool holder numbers: SWGCR/L1010E05, SCLCR/ L1010E06, SDJCR/ L1010E07, SDNCN/ L1010E07, SCLCR/ L1010E06, LW1010R/L04, QA1012/L032. Cutting tool set HM 12mm, 9 pieces with reversible HM carbide tips. In wooden box. ISO tool holder numbers: LN1215R/L04, PWKNR/L102J06, PWUNR/L1012J09, PSSNR/L1012J09, PSSNR/L1215H09, PSBNR/L1215H09, PWGNR/L1215H06, LW1215R/L06, QA1222R/L033. Cutting tool set HM 16mm, 7 pieces with reversible HM carbide tips. In wooden box. ISO tool holder numbers: SCLR1616K06, SSRCR1616H09, SSRCR1616H09, SCGCR1616H09, SCGCL1616H09, LW1616R04, QA1622R/L03

4. Cutting tools set HM 20mm, 7 pieces with reversible HM carbide tips. In wooden box. ISO tool holder numbers: PWUNR/L1518M08, PSSNR/L1518M12, PSSNR/L2020-12, PWGNR2020 08, PSRNR/L2020-12, LW2020R 08, QA2027R/L045. FIVE spare HM carbide tips (reversible, parting or threading as appropriate) for EACH of the above (30) cutting tool holders. That is, 150 spare cutting tips in total

PTC/AGR Page 3 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A2

Small Centre Lathes with ToolingScrew cutting precision gap bed lathe, manufactured to DIN 8606, with oil immersed enclosed transmission (oil included)Distance between centres 630mmCentre height 160mmMax swing over bed 320mmMax swing over saddle 178mmMax swing in gap 430mmLength of gap 115mmSpindle bore 38mmSpindle nose D 1–4Spindle taper MT 5Tailstock taper MT 3No of spindle speeds 18Range of spindle speeds 65–1800 rpmMetric threads 0.4–7mmImperial threads 4–56TPILead screw diameter/pitch 22/3mmMotor power 1.1kw, 400V, three phaseNet weight 380kg

4

PTC/AGR Page 4 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

Accessories and consumables to include:3-jaw chuck (160mm)4-jaw chuck (200mm)Face plate 250mmFixed steadyTravelling steadyElectrically interlocked chuck guard4-way indexing tool post standRear splash guardSpindle foot brakeThread dial indicatorToolbox with service toolsSiemens electricsComplete coolant system, including 10 litres of coolant concentrateLow volt machine lightRevolving tailstock taper 3MT

Each lathe complete with the following tools:1. Cutting tool set HM 8mm, 7 pieces with reversible HM carbide tips. In wooden box. ISO tool holder numbers: SWGCR/L0810D05, SCLCR/L0810D06, SDJCR/L0810D07, SDNCN/L0810D07, SCLCL0810D06, LW0810R/L04, QA0812R/L032. Cutting tool set HM 10mm, 7 pieces with reversible HM carbide tips. In wooden box. ISO tool holder numbers: SWGCR/L1010E05, SCLCR1010E06, SDJCR/L1010E07, SDNCN/L1010E07, SCLCR/L1010E06, LW1010R/L04, QA1012R/L033. Cutting tool set HM 12mm, 9 pieces with reversible HM carbide tips. In wooden box. ISO tool holder numbers: LN1215/L04, PWKNR/L1012J06, PWUNR/L1012J06, PSSNR/l1012J09, PSSNR/L1215H09, PSBNR/L1215H09, PWGNR/L1215H06, LW1215R/L06, QA1222R/L03

PTC/AGR Page 5 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

4. Cutting tool set HM 16mm, 7 pieces with reversible HM carbide tips. In wooden box. ISO tool holder numbers: SCLCR1616K06, SSRCR1616H09, SSRCR1616H09, SCGCR1616H09, SCGCL1616H09, LW1616R04, QA1622R/L035. FIVE spare HM carbide tips (reversible, parting or threading as appropriate)for EACH of the above (30) cutting tool holders. This is, 150 spare cutting tips in total

A3

Turret Mill3 hp variable speed cast meehanite turret mill with powered quill feedTable size 200 x 914mmTable travel (longitudinal) 600mmSaddle travel (cross) 240mmKnee travel 350mmRam travel 300mmQuill travel 127mmQuill diameter 85.7mmSpindle diameter R8Quill power feed 0.04, 0.08, 0.16 mm/revSpindle speeds 60–3500 rpm (variable)Main motor 3 hp, three phase, 400VHead movement L/R 90°Maximum spindle to table distance 358mmMinimum spindle to table distance 0mmMaximum spindle to column distance 410mmMinimum spindle to column distance 130mmMachine weight 900 kg

1

PTC/AGR Page 6 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

Accessories/specification to include:Servo type variable longitudinal feed and rapidOne-shot lubricationComplete coolant systemElectrically-interlocked spindle guardLow voltage machine lightSteel base trayDual dials to allow for working in either imperial or metricOne R8 horizontal milling attachment in wooden box

A4

Shaping Machine and Tooling350mm stroke mechanical shaping machine suitable for single piece and small batch productionMaximum shaping length 350mmDistance from lower edge of ram maximum 330mm to upper surface of table minimum 60mmMaximum horizontal table travel 400mmMaximum vertical table travel 270mmSwivel angle of table up to 45°Number of strokes per minute 32, 50, 80 or 125Table feed per ram stroke: Vertical 0.21, 0.42, 0.63 or 0.84mm Horizontal 0.18, 0.36, 0.54 or 0.72mmMotor 1400 rpm, 1.5kw, 400V three phaseVice jaws 180 x 55 x 150mmOverall dimensions L x W x H 1390 x 860 x 1460 mmNet weight 1000 kg

1

Shaping machine to be complete with the following:- One vice with table clamping belts- One tool holder- Two sets of 4-piece shaping machine cutting tools

PTC/AGR Page 7 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A5

Geared Drilling Machine30mm capacity precision geared pillar drill with automatic lubrication and power fed quillMaximum drilling capacity in steel 30mmMaximum drilling capacity in cast iron 35mmMaximum tapping capacity in steel M25Maximum tapping capacity in cast iron M28Morse taper of spindle M3Maximum drilling depth 120mmMaximum tapping depth 90mmTable size 380mm x 400mmBase size 400mm x 655mmDistance spindle to column 250mmDistance spindle to table Min0/Max 820mmDistance spindle to base maximum 1220mmColumn diameter 110mmMain motor 1500/3000 rpm 1.5/1.9 hp, 400V three phaseSpeeds 50 Hz 65, 125, 185, 365, 540, 1055, 1560, 3060Automatic drilling feed 0.10–0.20mm/revWeight 260kgDimensions 800 x 600 x 2270mm

1

PTC/AGR Page 8 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

Standard features:Geared driveAutomatic drill ejectorLow voltage machine lightIntegrated coolant systemAutomatic power feed to quillDepth stopForward/reverse switchSpindle protection nutTable and Base ‘T’ slottedElectrically interlocked chuck guardEmergency push button stopComplete with the following accessories and tools:ONE 3M x J3 drill chuck arbourONE 16mm key type drill chuck with keyTWO Morse taper drill sleeves 2–3MTTWO Morse taper drill sleeves 1–3MTTWO Drill drifts for 1 and 2MTTWO Drill drifts for 3MTTWO 12.5mm No 1MT taper shank drillsTWO 13.0mm No 1MT taper shank drillsTWO 13.5mm No 1MT taper shank drillsTWO 14.0mm No 1MT taper shank drillsTWO 14.5mm No 2MT taper shank drillsTWO 15.0mm No 2MT taper shank drillsTWO 29.0mm No 3MT taper shank drills TWO 16.0mm No 2MT taper shank drills

PTC/AGR Page 9 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

TWO 17.0mm No 2MT taper shank drillsTWO 18.0mm No 2MT taper shank drillsTWO 19.0mm No 2MT taper shank drillsTWO 20.0mm No 2MT taper shank drillsTWO 21.0mm No 2MT taper shank drillsTWO 22.0mm No 2MT taper shank drillsTWO 23.0mm No 2MT taper shank drillsTWO 24.0mm No 3MT taper shank drillsTWO 25.0mm No 3MT taper shank drillsTWO 27.0mm No 3MT taper shank drillsTWO 29.0mm No 3MT taper shank drillsTWO 31.0mm No 3MT taper shank drills

PTC/AGR Page 10 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A6

Surface GrinderManually operated 6" x 12" surface grinder with magnetic chuckGrinding capacity 152 x 305mmTable movement 170 x 320mmTable to spindle centre maximum 280mm minimum 89mmGrinding wheel size 180 x 31.7 x 13mmGrinding wheel spindle speed 2900 rpmVertical feed per rotation 1mmVertical feed graduations 0.01mmCross feed per revolution 2mmCross feed graduations 0.02mmMotor ¾ hp, 230V single phaseFloor area 440 x 430mmWeight 205 kgRack and pinion longitudinal movement with counterbalanceVee and flat slide ways for table, lubricated with oil nipplesGrinding wheel mounted on collet which fits on quick release spindle taperComplete with the following accessories and consumables: 6" x 12" magnetic chuck Fabricated cabinet stand TEN grinding wheels to suit

1

PTC/AGR Page 11 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A7

Drill GrinderAccurate bench grinder to sharpen twist drills up to 20mm diameter- Variable grindstone speed, continuous speed regulation- Cast iron mounting base- Balanced motor with high quality ball bearings- Emergency stop button- Prism guided feed- Angle adjustment for all drill types- Stable prismatic holding fixture- Self-trimming cup wheel

Cup grindstone external diameter 40mmContinuous speed range 1400–7600 rpmBit grinding angle 90°–150°Range of drill sizes 3–20mmMotor 500W, 230V single phaseDimensions 225 x 490 x 240mmWeight 27 kg

Complete with TEN 40mm cup grindstones to suit

1

PTC/AGR Page 12 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A8

Pedestal GrinderHeavy duty twin wheel bench grinder (with pedestal)- Sealed pre-lubricated ball bearings and balanced motor- Thick wheel guards with built-in dust chutes- Adjustable shatterproof eye shieldsGrinding wheels (fine and coarse) 205 x 25mm (20mm bore)Motor ¾ hp, 230V single phaseWeight 28 kgEach complete with the following accessories and consumables:ONE fabricated steel stand to suitFOUR spare coarse grinding wheels to suitTWO spare fine grinding wheels to suitONE wheel dresser

2

A9

58-piece Steel Clamping Kit 12mmSuitable for clamping work pieces to ‘T’ slotted tables on milling machines and pedestals drills. To suit 14mm ‘T’ slots using 12mm studsSet to comprise: 24 studs, 4 x 3", 4 x 4", 4 x 5", 4 x 6", 4 x 7", 4 x 8" 6 x ’T’ nuts, 6 x flanged nuts 4 x coupling nuts, 6 x step clamps 12 (6 pairs) of step blocks, varying sizes 1 x wall-hanging storage box

1

PTC/AGR Page 13 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A10

58-piece Steel Clamping Kit ⅝"Suitable for clamping work pieces to ‘T’ slotted tables on milling machines and pedestal drills. To suit ⅝" ‘T’ slots using ½" studsSet to comprise: 24 studs, 4 x 3", 4 x 4", 4 x 5", 4 x 6", 4 x 7", 4 x 8" 6 x ’T’ nuts, 6 x flanged nuts 4 x coupling nuts, 6 x step clamps 12 (6 pairs) of step blocks, varying sizes 1 x wall-hanging storage box

1

A11

Swivel Base Milling ViceWide-opening swivel vice made of high quality ductile iron- Hardened and ground enclosed lead screw and sliding surface- Complete with removable crank handle and extension piece- 360° swivel base, 1° graduationsJaw width 165mmJaw opening 300mmJaw depth 60mmOverall size 550 x 230 x 145mmWeight 55 kg

2

PTC/AGR Page 14 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A12

Machine ToolingONE R8 x 6mm colletONE R8 x 8mm colletONE R8 x 10mm colletONE R8 x 12mm colletONE R8 x 16mm colletONE R8 x 20mm colletONE Drill chuck arbour R8 Taper – Jacob taperONE 3–16mm drill chuck with J3 taper complete with chuck keyTWO SETS of Milling Cutters- 20-piece set on wooden box- Made from HSS, TiN. coated- 10 pieces of 2 flute slot drills- 10 pieces of 4 flute end mills- Sizes 3, 4 ,5, 8, 10, 12, 16, 20 mmTWO SETS Straight shank drill bits- 25-piece set, precision ground, HSS, titanium coated- 1–13mm x 0.5mm- in metal pop-up caseONE metric boring head with R8 shank- high rigidity and accuracy- reading to 0.025mm- capacity 10–120mm- boring hole 12mmONE Boring bar set- 9 pieces, 12mm shank diameter- carbide tipped- wooden storage base- to fit the above boring head

1 Set

PTC/AGR Page 15 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

TWO SETS Internal threading tools- 60° DIN 283- carbide tipped brazed tools- for metric and unified threadseach set: one x 12 x 12 shank one 16 x 16 shank one 20 x 20 shankTWO Two-wheel knurling tools, 20mm straight shank

PTC/AGR Page 16 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A13

Measuring EquipmentONE outside micrometer, carbide measuring faces, chrome plated frame 0–25mm, 0.01mm graduationsONE outside micrometer, carbide measuring faces, chrome plated frame25–50mm, 0.01 mm graduationsONE outside micrometer, carbide measuring faces, chrome plated frame50–75mm, 0.01 mm graduationsoutside micrometer, carbide measuring faces, chrome plated frame75–100mm, 0.01 mm graduationsONE SET digital knife edge verniers (three pieces)- internal, external and depth measurement- thumb wheel- manual power on/off- zero setting at any position- metric/inch conversion at any position 1 x 0–150mm 1 x 0–250mm 1 x 0–300mmTWO Dial test indicators, metric, 0.01mm graduation, 30mm total movementONE Depth micrometer set: 0–100mm, 0.01mm graduation, four anvilsTWO Magnetic clock stands, magnetic base, on/off switchONE Vernier height gauge, 0–500mm, 0.01mm graduation- carbide tipped scriber with fine adjustment- height gauge made of stainless steel

1 Set

PTC/AGR Page 17 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

ONE SET Telescopic gauges, 6 pieces, range 8–150mmONE Dial bore gauge, 50–160mm, 5 anvils, depth 150mm, graduation 0.01mmONE Screw pitch gauge, metric, 30 blades, range 0.25–3.0mmSIX Outside callipers, steel with hardened points, flat legs, polished, riveted, 200mmSIX Inside callipers, steel with hardened points, flat legs, polished, riveted 200mmSIX Steel scribers, chrome vanadium, hardened points, double-ended, straight and cranked, 230mm, plastic handleSIX Steel rulers, stainless, 1000mm, 1mm graduationsSIX Vernier callipers, hardened stainless steel, metric, measures external, internal and depth. Vernier scale, locking screwSIX Combination squares, 300mm, metric and angular measuring and marking, both inside and outside tri squares, mitre square, 180° protractor, built-in spirit level and scribe and depth, height and marking gauges. Stainless steel rule, cast metal stock with milled faces

A14

Foot ShearsFabricated steel foot-operated shears with tool steel blades- high carbon, high chrome alloy, tool steel blades- finger guard- back gauge- front gauge- side gauge- spring actuated hold-down barCutting length 1250mmCapacity mild steel 1.6mmBack gauge range 650mmWeight 550kgSize (L x W x H) 1600 x 810 x 1100mm

1

PTC/AGR Page 18 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A15

Long Throat Hand ShearsHand shears for floor mounting using built-in anchoring feet. Heavy duty, with detachable handle. Adjustable work piece hold-down bracketShearing capacity steel plate 6mmShearing capacity round bar 13mmBlade length 300mmWeight 30kgComplete with ONE set of spare blades

1

A16

Combination Hand Shear/CropperHand shears for floor mounting with extra shearing blade for flat, square angle and ‘Tee’ profilesDetachable handleShearing capacity plate 10mmShearing capacity flat 90 x 14mmShearing capacity square 20mmShearing capacity round 22mmShearing capacity angle 60 x 7mmShearing capacity ‘T’ 60 x 7mmWeight 107 kgComplete with one set of square blades

1

A17

Hand Operated Swage (bordering machine)Manual swaging machine for forming light gauge sheet metalComplete with 5 sets of swaging rollers and wrenchLugs for bench mounting, adjustable depth gaugeMaximum thickness of steel sheet: 1.25mmDistance between roller (centre to centre) 62mmDistance from rollers to body 250mmOverall size (L x H x W) 600 x 550 x 500Weight 50 kg

1

PTC/AGR Page 19 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A18

Manual Three Roller Bending MachineFor bending steel sheet in curves or cylinders- openable top roll- fixed lower roll, adjustable third roll- grooves on the end of roll for ring rollingWorking width 1250mmMaximum sheet thickness 2.5mmRoll diameter 90mmMinimum bending diameter 130mmOverall size (L x H x W) 2350 x 1130 x 800mmWeight 530kg

1

A19

Manual Box and Pan FolderAll steel frame construction, full length segmented 45° clamping blade, reinforcing angle folding blade, counterbalance springMaximum folding width 1250mmMaximum sheet thickness 2mmMaximum folding angle 135°Overall size (L x H x W) 1598 x 1165 x 900mmWeight 315kg

1

PTC/AGR Page 20 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A20

Power Hacksaw and ConsumablesHeavy duty hydraulic hacksaw with a 225mm diameter cutting capacity- hydraulic controlled blade position giving infinitely variable saw feed pressure control- motor overload protection and automatic stop- re-circulating coolant system- adjustable material length stop- clamping device for short ends- equalising bar for jaws- nesting fixture for multiple sawing of stacked bars, small rounds and tubing- material support stand with adjustable height roller- toolbox and service tools including grease gun- Instruction manual and parts listMaximum cutting capacity, 90° round 225mmMaximum cutting capacity, 90° oblong 250 x 210mmMaximum cutting capacity, 45° round 120mmMaximum cutting capacity, 45° oblong 210 x 120mmStroke length 140mmStrokes per minute 80, 100, 120Blade size 400 x 32mmMain motor 2 hp, 400V 3-phaseDimensions (L x W x H) 1400 x 850 x 1200Weight 485 kgComplete with:- THIRTY hacksaw blades, 10 TPI, 400 x 32mm to suit- Five litres of coolant concentrate

1

PTC/AGR Page 21 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A21

Oil-Cooled Electric Arc Welder and AccessoriesProfessional heavy-duty welder with a duty cycle of over 70% and a welding current up to 300 ampsSwitched stepped-choke output controlMounted on wheelsExample of type Pic-Arc, Pickhill, UKMaximum welding current 300 ampsInput voltage 230/400V (single phase 220–240V, three phase 380–415V)KVA rating 15 kVA230V fuse 60 amps400V fuse 35 amps50V welding current range 35–300 amps80V welding current range 50-220 ampsNumber of welding current selections 72Weight 175 kgOil capacity 61 litresDimensions (W x D x H) 580 x 380 x 700mmSuitable electrode range 1.6mm – 8mm

1

Complete with:- 1 x 600 amp short stub electrode holder- 1 x heavy duty earth clamp- 1 x high grade hand-held welding mask with glasses- 4 x chipping hammers- 4 x wire brushes- 10 x welding glass (dark)- 10 x welding glass (plain)- 10 x clear safety lens- 10 metres x 50mm2 welding cable

PTC/AGR Page 22 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A22

Air-Cooled Electric Arc Welders and AccessoriesMedium-duty air cooled welding transformer with a duty cycle of 60%Continuously adjustable current using magnetic shuntMounted on wheelsDual voltage 230V (single phase) 400V (three phase)Thermal overload protectionFan assisted coolingOutput amperage range 50–200 ampsMaximum input power 9 kVAElectrode size 1.6–4mmOpen circuit voltage 44-70VDimensions 290 x 500 x 360mmWeight approximately 40 kgEach complete with:- 1 x 300 amps short stub electrode holder- 1 x heavy duty earth clamp- 3 x hand shields with glasses- 1 x chipping hammer- 1 x wire brush- 10 x welding glass (shade 10)- 10 x welding glass (clear)- 10 x clear safety lens- 10 metres x 35mm2 welding cable

4

PTC/AGR Page 23 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A23

MIG Welder with AccessoriesPortable single-phase MIG welder suitable for use with CO2 or Argon gasAccepts 15 kg wire rolls, 0.6mm or 0.8mmEuro torch connectorEight stage power settingVariable wire speed controlPCB controlled ramp up, burn back, wire speed and timerTurbo fanWheel kit, frame suitable for full sized gas cylinderSupplied complete with:- TWO x 15kg spools of 8mm welding wire- Double gauge gas regulator- Earth cable and earth clamp- Welding cable and MIG welding torchVoltage 230V single phaseOutput amperage range 30–180 ampsMaximum input power 3.0kWAmperage at 20% duty 180 ampsAmperage at 60% duty 90 ampsOpen circuit voltage 18–34VWire sizes: mild steel 0.6, 0.8mm stainless steel 0.8mm aluminium 0.8mmMaximum welding thickness (mild steel) 5–6mmDimensions 510 x 840 x 780mmWeight 55 kg

1

PTC/AGR Page 24 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A24

Plasma Cutting MachineProfessional unit able to cut cleanly through mild/stainless steel, aluminium, brass and copperRequiring only compressed air and a electricity supplyInput voltage 230V single phaseCutting current 40 ampsCutting depth mild steel/aluminium 8mmCompressed air pressure 5.2–5.7 barCompressed air requirement 3.5 cfmDimensions 610 x 456 x 695mmWeight 50 kgComplete with professional on/off cutting torch, earth lead and air filter/regulatorUnit mounted on wheels

1

A25

Oxy-Acetylene Cutting and Welding SetProfessional gas welding and cutting set comprising:- Shank mixer- Cutting attachment- Four swaged welding nozzles- One oxygen (two guage) regulator- One acetylene (two guage) regulator- Five metres blue oxygen hose (fitted)- Five metres red acetylene hose (fitted)- Spark lighter- Tip cleaner ser- Spanner- Three pairs of flip-up goggles- Storage case

1

PTC/AGR Page 25 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A26

Pillar Drill and AccessoriesFloor-mounted belt-driven pillar drillMotor 1 hpVoltage 230V single phaseNo of speeds 9Range of speeds 200–2170 rpmSpindle taper MT 3Maximum distance spindle to table 720mmDistance spindle to column 280mmTable size 350 x 350mmHoles/slots for fixing a vice yesTotal height 1780mmWeight 167 kgComplete with:- two spare drive belt sets- 19mm chuck and guard- one 13-piece set of HSS tapered shank drills, 10 – 21mm at 1mm intervals- one 25mm HSS tapered shank drill- two sets of 8 piece HSS straight shank jobbers drills 1 – 8mm- one drill sleeve MT3 – MT 1- one drill sleeve MT 3 – MT 2- one drill press vice, jaw width 100mm, jaw opening 75mm, jaw depths 32mm, weight 5 kg

1

A27

Steel-topped WorkbenchesSteel leg frames made from 14 gauge sheet with diagonal bracingFrames finished in epoxy powder coatDimensions 840 x 700 x 1500mmWorktop: 40mm thick multiplex formed from resin bonded hardwood laminations topped with a 2mm metal sheetLower full-length shelf approximately 250mm wideWorktop dimensions 700 x 1500mm

13

PTC/AGR Page 26 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A28

Engineers’ VicesHeavy duty cast iron constructionJaw plates 100mm wideJaw opening not less than 100mmJaw depth not less than 55mmComplete with nuts, bolts and washers suitable for mounting the vice on a 40mm thick multiplex worktop

13

A29

Hand Tools for Training PurposesTHIRTEEN Hacksaw frames to suit 300mm blades together with 10 hacksaw blades eachTHIRTEEN 5-piece engineers file set. All files fitted with plastic handle, 200m file lengths, second cut, flat round, half round, square, triangularTHIRTEEN Ball pein hammer 455 g hardwood handleTWO Combination pliers, insulated grips 180mmTWO 6 piece screwdriver set (4 flared tip, PH1, PH2)TWO Allen key set, 9 pieces, metricTHIRTEEN Measuring tapes, retractable, 3 mTHIRTEEN Stainless steel rule 300mmTWO Adjustable wrenches 300mmTWO Stillson wrenches 300mm

1 Set

PTC/AGR Page 27 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

THIRTEEN Engineers’ square 150mmTHIRTEEN Stainless steel dividers with setting wing and screw. Square legs 175mmTHIRTEEN Steel scribers, chrome vanadium steel, hardened points, double ended, straight and cranked. Knurled or plastic gripTHIRTEEN 4-piece centre punch sets, 2, 4, 6, 8mm points 100–150mm longTHIRTEEN General purpose tin snips (shears) with end stop 350mmONE 11-piece set of combination spanners 8mm – 24mmONE ½" square drive socket set, metric, 13 sockets, 10–32mm, ratchet, 100mm extension, 200mm extension, Tee bar, universal joint, speed braceTWO Pry-bars 400mm longONE Tool trolley, with four drawers and base unit, 4 wheels, rubber mat on worktop. Total capacity 280kg size: 890 x 470 x 880mm, 47kg

A30

230mm Angle Grinders and ConsumablesDisc diameter 230mmMotor 2300WVoltage 230V single phaseNo load speed 6600 rpmSpindle thread M 14Weight 5 kgComplete with:- Tools for changing discs- Spindle lock- Disc guard- Left or right handle- TWENTY-FIVE 230 x 3mm cutting discs for steel- TEN 230 x 6mm grinding discs for steel- TWELVE Clear plastic safety goggles

3

PTC/AGR Page 28 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A31

115mm Angle Grinder and ConsumablesDisc diameter 115mmMotor 800WVoltage 230V single phaseNo load speed 11000 rpmSpindle thread M 14Weight 1.6 kgComplete with:- Tools for changing discs- Spindle lock- Disc guard- Left or right handle- TWENTY 115mm cutting discs for steel- TEN 115mm grinding discs for steel

2

PTC/AGR Page 29 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A32

Electric Drills and ConsumablesVariable speedReversibleHammer actionChuck 13mm, key typeMotor 250WCapacity in steel 10mmCapacity in masonry 13mmCapacity in wood 20mmNo load speed 2600 rpmVoltage 230V single phaseComplete with:- Side handle- ONE 75-piece bit and saw set19 x HSS drill bits (titanium coated)20 x 25mm screw driver bits4 x flat bits, 10, 13, 19, 25mm for wood5 x masonry bits 5 x Brad point wood bits4 x hole saws1 x hole saw arbour1 x bit holder4 x depth gauges2 x counter sink bits1 x alloy key1 x nail punch8 x socketsplastic case

2

PTC/AGR Page 30 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A33

Compressor and Accessories2 hp 230V single phase electric motor8 cubic feet per minute cast iron pump with oil sumpTwin vee belt drive100 litre air receiverWorking pressure 9 barAutomatic pressure control switchOverload protectionPump incorporates positive splash feed lubricationDimensions 1100 x 400 x 740mmWeight 67kgPortable, two wheels and handle barAccessory kit comprising: spray gun with 1.5mm nozzle, 5 metre air hose, blower gun, degreasing gun, tyre inflator, ¼" BSP fittings and quick release couplings all round

1

A34

30 Tonne Hydraulic PressHydraulic ram with internal return springsPressure gaugeCapacity 30 tonnes, manualRam stroke 95mmExtension screw 75mmMaximum ram-table distance not less than 600mmMinimum ram-table distance 180mmFrame width 120mmTable working width 550mmWeight 137kgComplete with:- reversible flat plate/Vee blocks- orifice plate and seven punches, 12, 16, 18, 20, 22, 25, 30mm

1

PTC/AGR Page 31 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A35

Tap and Die SetProfessional 35-piece metric tap and die setPrecision machined tungsten steel taps and diesSet contains:- 1 x taper taps for each size- 1 plug tap for each size- 1 x die for each size- 2 x adjustable tap wrench- 2 x die stocksRange of metric thread sizes: 6, 7, 8, 9, 10, 12, 14, 16, 18, 20mmSteel storage case

1

A36

Table and Chair SetsSet of four chairs and one tableHeavy duty durable construction suitable for full-time adult education classesTable: Four-legged square tubular epoxy-coated steel frame with rigid plastic-coated easy-clean table topsTable size (W x D x H) 1200 x 800 x 725mmChairs: stackable, polypropylene bucket seat, with round tubular epoxy coated steel frameColour choice: grey or blue

15

A37

First Aid Kit50-person first aid kit in durable plastic boxKit contains:- 3 boxes of 20 assorted waterproof plasters- 6 x No 16 eye pads with bandages- 8 x non-woven triangular bandages- 12 x assorted safety pins- 12 x 120 x 120mm HSE dressings- 4 x 180 x 180mm HSE dressings- 20 x alcohol-free hygienic cleansing wipes- 3 pairs of disposable gloves- first aid guidance leaflet

1

PTC/AGR Page 32 / 33 10/4/2007 / 2:39 PM

Tender Ref. 1500 1869/ERA Appendix 1

Item Name and required parameters Quantity unit price total item price Compliance aRemarks b/currency currency yes/no

TO BE COMPLETED BY THE INVITEEUNIDO REQUIREMENTS

A38Last-Trip ContainerUsed to contain all the above lots for sea freight and land freight. To be left on site in Iraq to act as secure storage

1

*) compliance must be confirmed in detail by the contractor’s offer and technical documentation and will be verified by UNIDO during technical evaluation;**) if not compliant with UNIDO’s required parameters, the invitee must indicate his parameters in this column

Note for the invitees: - Offers submitted without detailed technical brochures will not be considered. - Items quoted for should be in compliance with international standard for durability/safety and should mention the country of origin.

Delivery PeriodItems should be delivered within 2 months from the date of the confirmed order.

Installation, Commissioning and AcceptanceNo installation required.

PTC/AGR Page 33 / 33 10/4/2007 / 2:39 PM