Unipark

Automaticparking spacebar guard

Today reserving yourparking space is possible.

The Unipark automatic bar is aninnovative idea that can be appliedin residential and industrial set-tings.It is easy-to-use and practical,and ensures that your parkingspace is always free.

Radio transmiter

Control panelRadio receiver

Reception antenna

Unipark “large”

Unipark allows you to always

park withoutwasting time

Total safety. Movement stop in case of obstacle detection provides maximum safety while in use.

Aesthetics and efficiency. For improved management of the reserved parking space, Unipark is also available with an extra-length bar.

Unipark features a base to affix the operator to the ground in any applicative condition.

Unipark “small”

350

450

800

552

490

920 ARK1 - 990 ARK2

Technical featuresType UNIPARK

Protection rating IP54

Power supply (V) (50/60 Hz) 230 AC

Motor power supply (V) 24 DC

Current draw (A) 1,7 max

Power (W) 20

Manoeuvre time (s) 10

Duty cycle (%) INTENSIVE USE

Resistance to crushing (Kg/cm² - lb/in²) 2,5 - 0,85

Colour RAL 1028

Operating temperature (°C - °F) -20 ÷ +55 - -4 ÷ +131

24 V DC © Ca

me

- KDE

P#CE

N27A

4S10

408

- 07/

2011

- Th

e da

ta a

nd in

form

atio

n sh

own

in th

is ca

talo

gue

are

subj

ect t

o ch

ange

with

out t

he o

blig

atio

n to

give

prio

r not

ice b

y CA

ME

canc

elli a

utom

atici

S.p

.A.

The electronics> Automatic pairing of radio code from transmitter to receiver.> Amperometric device detects obstacles and manages the end points.> Input connector for system extension cards. Up to 4 Uniparks can be connected to the same control panel.

The range

001UNIP Self-locking operator complete with fixing plate.002ZL22 Control panel for one barrier with built-in radio decoder. Possibility of controlling up to 4 barriers with n. 3 additional LM22 cards.002LM22 Motor-management extension card.002LB22 Card for connecting n. 2 12V-1.2Ah emergency batteries with rack.001ARK1 “Small” barrier.001ARK2 “Large” barrier.

Limits to useType UNIP + ARK1 UNIP + ARK2

Max space width (m/ft) 2/ 6,56 2,2/ 7,2

24 V DC

Dimensions

Made in Italy Camecancelli automaticiS.p.A.

via Martiri della Libertà, 1531030 Dosson di Casier - Treviso - Italy

www.came.com - info@came.it

UniparkIt is ideal for all those situations that require privateor staff parking spaces to be safeguarded.Unipark also makes it possible to raise and lowerthe bar by simply using the transmitter.

Standard installation

COMPLETE PAY-TO-PARK SYSTEM

The state-of-the-art; the now future of Came parking systems presents PS ONE, the ultimate web-based solution for pay-parking systems; even with multilevel and reserved parking facilities. Modular, versatile, simple and intuitive, its made for maximum connectivity and system integration. Easy, simple and safe parking management.

MODULARITY AND INTEGRATION, INFINITEDEVELOPMENT POTENTIAL. The fruit of Came’s R&D, PS ONE exploits technology by

making “native” ETHERNET interface devices.

This advanced management system lets you configure

unlimited peripherals, such as automatic cash registers,

entry and exit units, pedestrian monitors, and staffed

pay stations. All of these devices, connected to the

Ethernet network running the TCP/IP universal protocol,

are managed through a central server, to which can be

connected countless devices. A modular solution especially

engineered to meet the typical needs of small, medium and

large parking facilities. Not only: connecting to the Ethernet

network is extremely versatile as it can be done via optic

fibres, WiFi connections or even mixed solutions.

Entry/Exitunit

PS ONEautomaticcash register

Manualcash register

Centralserver

Compared to traditional parking management systems on the market, the PS ONE system features a “native” Ethernet network. Meaning that each device is Ethernet-network worthy so there’s no need for any additional modules. This lets you connect

an unlimited number of devices to meet any needs, from small temporary parking zones to large parking lots.

ALL AROUND EFFICIENCY AND CONTROL ALWAYS, ANYWHERE. The SNMP protocol if for remotely reaching the system and receiving and sending information or

system-status notifications. So you can remotely manage the parking system or simply monitor the

situation or quickly respond to an emergency call. So each event is monitored in real time, enhancing

the service efficiency, while also controlling operating costs and transit safety.

SNMP protocol

REMOTECONTROL

BENEFITS FOR THOSE MANAGING, SOLUTIONS FOR USERS. PS ONE features a PLATE READER, an OCR module for reading and recognizing license plates.

It digitalises any license plate in the world, including ones in Arabic. The EYE SYSTEM module,

moreover, can associate, at each vehicle’s entry and exit, the high definition images of all four sides

of the car. If needed, with a simple license plate or ticket search, the supervisor on duty can view

previously recorded HD images, to check any vehicle damage claims, for example.

All of the PS ONE peripherals, like the cash registers and the entry/exit units, are based on ARM hardware architecture and engineered to ensure low energy consumption.

One can pay via web, even with prepaid or postpaid packages. Not only, debit cards are also possible.

MULTIPLE PAYMENT SYSTEMS.

The automatic with PS ONE cash register can manage all main modes of payment. Fitted with the

latest generation displays, which are ultra simple and quick to use, they manage payments in the local

currency with either coins or bank notes. To cut down on system supervisor intervention, the automatic

cash register can be fitted with a change returning device for coins or bank notes, both of which are

self-loading. They can also take all major credit cards and debit cards in the various international

circuits. Customers can also pay with the more recent, innovative payment system, such as:

NFC - Near Field Communication so one can pay via cell phone or proximity card.

CREDIT CARD PAYMENT

COINPAYMENT

BANK NOTEPAYMENT

NFCPAYMENT

SMARTPHONEPAYMENT

INTERNET PAYMENT

NFCPAYMENT

SMARTPHONEPAYMENT

INTERNET PAYMENT

NFCPAYMENT

SMARTPHONEPAYMENT

INTERNET PAYMENT

TYPE OF PAYMENT

CREDIT CARD PAYMENT

COINPAYMENT

BANK NOTEPAYMENT

CREDIT CARD PAYMENT

COINPAYMENT

BANK NOTEPAYMENT

SPECIAL BUSINESS PARK AGREEMENTS.

The advanced PS ONE system lets those managing it boost productivity in their facility with specific

actions and agreements, discount packages with simple complimentary Vouchers or with mobile

devices: tablet PCs, smart-phones, etc. To this end, all PS ONE units can be fitted a 2D barcode

reader. With rechargeable pre-paid cards, you can also custom-manage registered parkers.

ELECTRONICS AND TECHNOLOGY. ENTRY UNIT The fundamental elements are: • Fan fold ticket printer• Proximity reader for registered parkers • TFT 5.7” display • Ticket request button• Coil control detector • Barrier management• Built-in video-intercom with voip technology • Fans and heaters to conditions air indoors • Collector for 5,000 fan fold tickets

The optional elements are: • IMAGER reader for 1D and 2D barcodes and even on mobile devices•Recording videocams to memorise vehicle entry images• Videocam and OCR module for license plate reading• Built-in barcode reader, printer device, ISO format plastic card writer with proximity and microchip mode

EXIT UNIT

The fundamental elements are: •Motorisedticketreader•Proximityreaderforregisteredparkers• TFT5.7”display•Coilcontroldetector•Barriermanagement•Built-invideo-intercomwithvoiptechnology• Fansandheaterstoconditionsairindoors

The optional elements are:• IMAGERreaderfor1Dand2Dbarcodesandevenon mobile devices•Recordingvideocamstomemorisevehicleentry images•VideocamandOCRmoduleforlicenseplatereading•Built-inbarcodereader,printerdevice,ISOformatplasticcard writer with proximity and microchip mode

AUTOMATIC CASH REGISTER

The fundamental elements are: •WideverticalTFTgraphicdisplay•CoinReader•BanknoteReader•Self-loadingchange-givinghopper• Ticket-issuerprinter• Video-intercomwithvoiptechnology•Built-inbarcodereader,printerdevice(to reprint lost tickets) and ISO format plastic card writer and reader with both proximity and microchip modes•Coinandbanknotecollectedinseparate, sturdy boxes under lock and key

The optional elements are: •Selfbanknoteloadingchangegiver•CreditCard/cashcardandmicrochip payment management•Singlediehopper(max2)• 2DIMAGERreader• TouchScreenmonitor•Banknotechangegivercompartment (1denomination)•Proximitybadgereader/writerforregistered user recharging

320 mm

1190

mm

ENTRY/EXIT UNIT The entry unit is based on an ARM architecture microprocessor that controls any and all peripherals fitted to the device. Communications to the central server passes through an ETHERNET network with the TCP/IP communications protocol. So each event is monitored in real time and sent to the management server. The mechanical structure is made of rust-proofed varnished steel.

PS ONE AUTOMATIC CASH REGISTER Modular automatic register made of varnished steel with highly resistant features. The management software allows high levels of system customisation: from viewing information on the monitor to managing custom rates for special events or periods.

750 mm

1720

mm

STAFFED MANUAL REGISTER The optional elements are:•Manual barcode ticket reader•Built-inbarcodereaderprinter,andISOformatplastic card writers reader in both proximity card and microchip modes•Receiptprinter•Additionaluser-sidedisplay•Rfidcardreader/writer•Built-incashdrawer

INTERCOMS• IPoperatorstationvoiceonly• IPoperatorstationvoice+video•GSMtelephonecallRouter

STAFFED MANUAL REGISTERThe staffed manual register is composed of an industrial PC with a 15” touch screen.

CENTRAL SERVER The server provides all of the features found on voip control unit required to manage an integrated intercom system.

470

mm

410 mm

210 mm

267

mm

CENTRAL SERVER AND MANAGEMENT SOFTWARE The management software is located in a central server that manages all entry and exit devices through an integrated web server and memorises all the events on a relational data base. With a standard browser and Internet connection you can access all of the query and statistical features needed. The client number is free; all users have their own profile through which they can access any associated features. Theservercanalsomonitorandhandle(evenremotely) the entry and exit passages.

SYSTEM COMPLEMENTARY PRODUCTS:

Registered parkers’ Entry point • TicketReader• LCD20x2Display• ProximityReader• IPIntercoms

Pedestrian barcode and proximity reader • LCD20x2Display• ProximityReader• Barcodeticketreader• IPIntercoms

Entry unit double heightBase unit with doubled user interfaces.

Exit unit double heightBase unit with doubled user interfaces.

Vehicle classificationThe system lets you define, depending on the entry points, differentiated rates, such as for cars, motorcycles, campers, buses, and so on, thanks to its careful classification based on vehicle heights, axles.

Tag long rangeLongrangevehicleidentificationsystemwithRFIDtechnologytoautomatevehicleaccess making it user-friendly, quick and inexpensive.

Available spaces displayMade up of a customisable screen-printed panel and a high-luminosity 4 alphanumeric display to show available spaces.

AUTOMATEDPAY & DISPLAYCAR PARKINGSYSTEM

PS PLAZAIntelligent parking solution

THE CAME PS PLAZA Intelligent parking solution

CAME proudly presents the PS PLAZA Parking Management System.

Made up of two complementary components, the PS PLAZA Terminal

and the PS PLAZA Software. PS PLAZA offers a fully modular solution

for all your parking management requirements.

PS PLAZA is not just a simple parking area with a Pay & Display

machine. It is a robust and elegant combination of technology and

design that effectively manages the resources of your parking area

landscape.

Often, many municipalities have complex parking environments

covering a disperse geographic area divided in to sub-sections. These

sub-sections then have their own individual considerations including

pricing, fee collection, curbside parking, lot parking, times in effect,

maintenance, legacy Pay & Display deployments, and enforcement.

CAME has developed PS PLAZA to address these considerations and

to provide a centralized solution to manage your parking topography.

Key benefits include:

• easily integrated with CAME PS PLAZA units

• environmently and economically conscious

• solar power

• support for wireless or hardwired Data Transmission Networks

• remote managment and diagnostics for PS PLAZA Units

• Data Collection for reporting and trend analysis

• advanced fee collection options

PS PLAZA is the result of the need to find an effective, intelligent solution to the traffic and parking problems that have an ever-increasing impact our daily city lives.CAME wanted to combine the functionality of the new par king meter with a sought-after design that fits perfectly into the environmental and urban context in which the parking meter is installed. Users will be able to pay in two different ways: coins or cards.

By means of a GPRS modem, the operator can monitor the network of parking meters as regards both their operation and the collection of statistical data regarding the use of the parking meters themselves.

PS PLAZA MACHINEFunctionality and sophisticated design

The CAME PS PLAZA Machine is conceived to provide an efficient and intelligent

solution to the increasing traffic problems present constantly in our cities.

This product combines the optimal mix of all the modern payment sys tems applied to

car parking with an excellent industrial design.

The payment system is designed to accept payment in the form of coins, credit and

debit cards, smart prepaid cards. The parking devices commu nicated by means of a

wireless comu nication network using either GSM or GPRS technology.

The network allows online configu ration and monitoring of device sta tus, money

collection and statistical user data collection.

The PS PLAZA Management Software application soft ware allows to control both

the con figuration features and the complete usage data collected by the device by

means of a friendly browser based interface.

COIN SELECTORA perfect payment management

Card reader: supports

• chip card technology

• prepaid/pay-as-you-go cards

• bank cards

Thermal printer: with self-sharpening cutter “Visible” compartment for removing the receipt with transparent anti-weathering protection

Management methods:

• as a stand-alone version

• with connection to a control unit via GPRSmodem or Ethernet network

Programming: via resident web application or remotely via the central management server.

Protection rating: IP54

Dimensions: H = 1830 mm L = 470 mm D = 270 mm

Conformity: European Standards EN 12414 “Vehicle parking control equipment Pay and display ticket machine”

PS PLAZA MACHINECharacteristics of excellence

Structure: AISI-304 stainless steel

Modular architecture: basic configuration, expandable with additional technological elements

(card readers, modems, GPRS...)

Construction: in three compartments that can be accessed separately

• technical compartment

• cash compartment

• electrical connection and battery compartment.

Cash box: capacity of 5 dm3

Power supply:

• Solar panel

• 12 V - 55 Ah rechargeable battery

• Option power at 230V - 50Hz by using an external control panel (to be required optionally) > Mains

or public lighting

Ergonomic panel: with serigraphed directions for use

Display: backlit LCD

4 lines of 20 alphanumeric characters to display the date, time, operating status, instructions

Optional 240x64 graphic display

Five anti-vandalism tactile buttons:

• Green for requesting a printed receipt

• Red for cancelling the current operation

• Silver push button (1) for selecting the language

• Silver push button (2) for selecting the tariff

• Silver push button (3) for selecting the amount to be debited from the card

PS PLAZA has been designed to be safely packaged, transported and stored. The PS PLAZA machine’s

clamp must be cemented so that its four coach screws are completely submerged into the cement casting.

Foundation clamp

Base plate

COMPLETE MANAGEMENT & SIMPLE PROGRAMMING

The PS PLAZA software application, installed on the parking meter, enables complete management and programming of the device via its web interface.CAME PS PLAZA Server is a powerful tool for managing your parking area resources.PS PLAZA Server can be used as part of the CAME PS PLAZA parking management system deployment.When used in a full CAME PS PLAZA parking management system deployment, PS PLAZA Server allows you to connect to each individual PS PLAZA terminal for historical reports, real-time usage, terminal diagnostics, and configuring the terminal.All information generated from the individual terminals is captured by the PS PLAZA Server database which allows for system wide monitoring, reporting, and trend analysis.Standard multi-user support allows for granular management of user permissions for not only configuring and maintenance, but also for reporting and diagnostic functions.PS PLAZA Server includes all the tools and functionality you need without any hidden modules or pricing.

CAME PS PLAZA Server includes:• Web Portal System Interface

• Standard Multi-user support

• Remote Reporting and Diagnostics

• Support for Variable Fee Schedules

• Real-Time PS PLAZA Terminal Monitoring and Alerting

• Robust, Fully Featured Parking Management Software

• Integrated Remote Management for CAME PS PLAZATerminals

PS PLAZA SERVER SYSTEM REQUIREMENTS :

• Operating System: Windows XP or Windows Server 2003;

• Web Server: IIS 4.0 or higher

SMART MODULAR ARCHITECTURESimple interventions

3 compartments that can be accessed separately:

• technical compartment

• cash compartment

• electrical connection and battery department

1389

(coi

n in

sert

ion

slot

)

1824

1589

(use

r in

terfa

ce /

info

rmat

ion

area

max

imum

hei

ght)

1484

(dis

play

)

PS4000Pay to park systemsThe solution for all typesof parking, even on several levels.

PS4000 is a complete system for

managing pay-to-park systems,

both for occasional as well as

subscribed parkers.

The system can be set up with

one or more cashiers, on several

levels, with outdoor signs displaying

the number of available spaces.

Limits to use

Automaticpay to parksystem forup to 10,000 parking spaces

Maximum parking spacesDedicated softwareUse w/out PCType of PC connectionMaximum distance between PSC4000 and PCMaximum number of manual cashier stationsMaximum number of levels or floors

Dimensions

Technical features

230V A.C. automatic pay to park systemPSE4000 Steel entrance unit with rust-proof coating and RAL1028 varnishing, with sensor for transponder

cards and keychains and token dispenserPSU4000 Steel entrance unit with rust-proof coating and RAL1028 varnishing, with sensor for transponder

cards and keychains and token dispenserPSC4000 Automatic steel cashier with rust-proof coating and RAL1028 varnishing, with sensor for

transponder cards and key-chains, coin payment system, token collector and displayPSM4000 Attended cashier station complete with control unit, software, display and PC30 interface to

connect to the PC.PSI01 Control unit for auxiliary devices such as traffic lights, signs, metal-mass detection sensors

(8 outputs).PSI16 Control unit for auxiliary cashiers, enables up to 16 PSC1-type payment stations

to be set up.PSC1 Auxiliary cashier enables payment even without PC connection.

Command accessoriesGET Proximity token

Warning accessoriesPSSRV Red-Green Traffic light Ø 210 mm PSINS Two-sides luminous sign showing “FREE-FULL”, supplied with mounting brackets

230V A.C. simplified automatic pay to park systemPS5000 Simplified automatic cashier in galvanized and painted steel - RAL 1028 -, with display and

coin-payment (fixed sum and no back change).

Additional accessoriesSMA Single channel metal-mass detection sensor SMA2 Two channel metal-mass detection sensor TST01 Transponder card ISO 7810 - 7813 formatTST04 Reprogrammable transponder card ISO 7810 - 7813 format PCT Transponder key-chainTAG Transponder bulb that can be housed in Came, Atomo, TOP-432NA and TOP-434NA series

transmitters

Intercom to guard house(optional).

Sturdy, tamper-proofcabinets finished withrust-proof coating.

Ample changeretrieval tray.

PSC4000Automatic cashier

This model is equipped with a token slot-unit for coins of va-rious denominations and a sensor for transponder cards and key-chains for subscribers to the parking area.It does not provide any change but can be integrated by manual pay-stations, linked to a PC to manage parkers and parking subscriptions, or with other auxiliary manual cashier-stations that do not need to be connected to a PC.

452.5

300

00511600

295

PSU4000

COIN

445

PSE4000

COIN

PSC4000

335

PS5000PSC4001

600

607

335

The rangeThe advantages

The Came automatic parking management system is the ideal solution to exploit the efficiency of the system to the maximum level, while simultaneously checking operating costs and transit safety. Each component part, has in fact been conceived to meet all of the typical needs of modern parking areas, while still maintaining maximum integrative modularity standards with all of the other Came products, according to a precise policy that frees the system of any limits in terms of further development.Choosing Came therefore means exploiting to the fullest the potential of a product that has been designed with your needs in mind.

The automatic cashier

Illuminated display shows amount due for parking.

The data and information appearing on this catalogue are subject to change at any time without warning from Came cancelli automatici s.p.a.

www.came.it-info@came.it

© C

am

e D

EP

5680 0

6/2

007

Made in Italy

For its quality processes management Came Cancelli Automatici is ISO 9001:2000

certified, and for its environmental management

it is ISO 14001 certified. Came designs and

manufactures entirely in Italy.

Type

Protection rating

Power supply (V)

Operating temperature (°C)

Dimensions (mm)

Colour

PSE4000

IP54

230 A.C. 50/60 Hz

-20 ÷ +55

1500 x 445 x 453

RAL1028

PSU4000

IP54

230 A.C. 50/60 Hz

-20 ÷ +55

1500 x 295 x 453

RAL1028

PSC4000

IP54

230 A.C. 50/60 Hz

-20 ÷ +55

500 x 335 x 453

RAL1028

10.000YESYES (partial)

RS232 - RS4855 m without PC40 (RS232) - 1000 m with PC40 (RS485)

164

PS5000Simplified Parking

The PS5000 unit is the ideal solution when pay-to-park fa-cilities require a fixed sum toll which can be paid with coins of different denominations and which does not give back chan-ge. It is easy-to-install and, at a later date, can be integrated with an RBM84 access control system to handle any mem-bership parking. This unit cannot be connected to the other PS4000 system units.

The management software, which runs with Windows, features a clear and intuitive graphic interface and does not require any specific hardware to run.Use is extremely simple an even without training, the staff will be able to manage the system promptly. A permanent connection to the PC is not indispensable, other than for the initial configuration operations and the input of new subscribers. The software can manage 2.500 subscribed parkers and 7.500 occasional parkers, for a total 10.000 parkers.

The software

Pay to park areas are becoming more and more popular as solu-tions to traffic issues within large and small urban centres alike. The Came solution includes all of the management, control and command devices, which are specifically designed for parking lots, along with all the automated devices needed to control ac-cess, such as automatic barriers and safety devices.

The automatic parking lotThe PSS4000 software enables full control of subscribed parkers. Simple to use it enables easy readout and

configuration of all parameters. Once configured, the system works even when not linked to a PC. For managing the system at a distance, the software may be used through a modem.

The functions

For customers who choose to subscribe there are several configurable management options, with scalable entrances broken down into time or calendar terms. These can be limited to which entrances are in fact assigned. Transit control in this case is done through transponder cards and key-chains, which are coded and inputed into the system. For system equipped with automatic cashier stations subscription recharges can also be activated directly at the cashier station, even when the parking area or payment stations are unattended. Subscriptions may also be directly managed through the software, when certain functions need to be activated or deleted from cards already in the system.

Parking subscriptions

PSSRV and PSINS Traffic light and sign

The PSSRV and PSINS traffic light and sign, respectively, are indispensable tools for managing a parking lot. Connected to the system, and to the software, they enable outdoor display of available spaces.

PSIO01 Auxiliarydevice control

The control unit makes it pos-sible to link up auxiliary devices such as traffic lights, luminous signs and metal-mass detectors, and is fitted with 8 output ports.

The system configuration is at the basic condition for an efficient parking management system. There are, in fact, numerous applications depending on the type of parking lot that needs to be managed, the number of entrances and exits and cashier stations, and whether these are manual or automatic.The top-level configuration for the PS4000 can operate 16 entrance and 16 exit units, 8 automatic cashier stations, 1 manual cashier station and 16 auxiliary cashiers. This system can be set up over 16 different parking levels.The minimal configuration, however, can operate with only two units, at the entrance and exit, and with only one attended cashier station for manual payment of parking.

Standard installation

Auxiliary cashier station

Small parking facilities can operate with the minimal configuration, that is, the entrance unit, the exit unit and the manual cashier. A typical ap-plication would be the parking lot of a shopping mall where customers use the parking spaces and pay directly at the attended, outdoor cashier or directly indoors at the retail outlets. This application ensures simple, efficient use, while being perfectly expandable if the traffic volume needs were to increase.

The basic configuration

PSI16 Auxiliary cashier control

Through the PSI16 control unit, up to 16 auxiliary payment stations can be set up.

PSC1Auxiliary cashier station

The PSC1 manual cashier station enables payments to be managed even when remotely located, without the assistance of a PC. The device, in fact, can read amounts from the transponder tokens and thus validate the exit.

Automaticpay to park

parking lots for up to 10.000

parking spaces

The GET transponder token is the ideal tool for managing occa-sional parkers. Besides its excep-tional sturdiness, the token is not susceptible to magnetic fields and sun rays, it is small and may be easily stored in a wallet.

The TST01 and TST04 cards are specifically designed to manage parking areas where clients have weekly, monthly or other passes.

Button for dispensingthe transponder token attwo different heights.

Built-in intercom connection for contacting the central guard-house in emergencies.

Transponder sensor reads proximity cards and key-chains, used by subscribers.

Ample tokenretrieval tray.

Inside electronics dedicated to managing the unit, protected by door under lock and key.

Sturdy, tamper-proof steel cabi-nets, with rust-proof coating and varnished with epoxy powders.

The comfortable transponder key-chain, is always handy for subscriber.

Large parking lots may require multiple entrance and exit units, but above all, they require automatic payment stations. The system can always be integrated with a manual payment stations or auxiliary payment stations located in remote points of the parking lot. This configuration enables subscribers using transponder cards and key-chains to be managed.

Large multi-levelparking system

Manual cashier

PS4000

PS4000 is a complete system for managing parking areas in small, medium and large commercial facilities. The entrance and exit units, together with the cashiers, are in fact specifically designed to manage the traffic of bothoccasional as well as subscribed parkers.The system enables integration with tokens and transponder cards andkey-chains, besides coin-payment for occasional parkers.The system can also take several entrances and exits,even over numerous levels.

Pay to park

PSE4000Entrance unit

Located parking lot entrances, can be made up of a maximum of 16 units. Enables occasional parkers to be dispensed with a transponder token to access the parking lot. Subscribers may use the transponder card or key-chain to access the parking lot by simply placing them in proximity of the sensor. The entrance unit is usually set up with a Gard series Came automatic barrier along with command and safety acces-sories, in accordance with current technical standards and regulations.

PSU4000Exit unit

Located parking lot exits, can be made up of a maximum of 16 units. Enables the occasional parker to use a token, approved by the automatic cashier, to exit the area. Subscribers of the service may use the supplied transponder card or key-chain used to exit the parking lot. Also the exit unit is usually set up with a Gard series Came automatic barrier along with command and safety accessories, in accordance with current technical standards and regulations.

Entrance and exit units